WP Greek Century in Mac doesn't work with Dreamweaver

I am a many year PC user and have finally made the leap too Mac and its another learning curve .. That said, in Dreamweaver and in Mac, WP Greek Century does not work!  I have reloaded the font and all I see is the alpha #.   If I load it into any browser, it still will not read greek.  My old PC didn't have a problem with this.  Some of the download sites say that this font, WP Greek Century, works with both PC and Mac.  The one odd spin to all this is that this greek font works in Fireworks ... Is there anything I can do to make it work in Dreamweaver?  Please advise and thanks.  Mark
ps.  I called Apple support and they could not help.

Thanks for your reply and I was afraid that this might the answer.  Looks
like I'm going to have to go back and fix a bunch of documents. Appreciate
your help in this matter.  Mark
From:   SnakEyez02 <[email protected]>
To:     Marcusb B <[email protected]>
Date:   02/13/2012 09:20 PM
Subject:        WP Greek Century in Mac doesn't work with
Dreamweaver
Re: WP Greek Century in Mac doesn't work with Dreamweaver
created by SnakEyez02 in Dreamweaver - View the full discussion
Fonts don't work on the web like they do in print.  Any font you use on a
website will require that the end user have that same font installed on
their system.
I did try to load that font from a free source (assuming this is how you
got it).  It is a PC TrueType and doesn't appear to work at all on the
Mac.  Now if you are looking for just a few characters you can code this
into the HTML:
http://tlt.its.psu.edu/suggestions/international/bylanguage/greekchart
.html .  As far as other fonts, this greek font seems to work on Mac:
http://www.dafont.com/ancient-geek.font .  But again, it's not a web-font
so you won't be legally allowed to use it on web pages, and it will only
work if the end user has that font installed on their system, unlike the
HTML entities previously linked.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/4205108#4205108]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/4205108#4205108]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

  • Firefox 3.6.27 (Mac) doesn't work with Google Blogger's Blog Archive links?

    I noticed this just started happening about week ago. Firefox 3.6.27 (Mac) doesn't work with Google Blogger when clicking in the Blog Archive sidebar links. I can't upgrade because I'm using a PowerMac. Anyone have a suggestion? Thanks!

    I press the combination after having some of the document's text selected, otherwise there wouldn't be anything to apply the paragraph style in the first place. But the real thing is I do the exact same with other paragraph styles combinations (Cmd+Alt+1, Cmd+Alt+2, Cmd+Alt+4, Cmd+Alt+5...) and it works. In Safari, even the one I'm interested in works (Cmd+Alt+3). The natural solution, it appears to me, would be a shortcut conflict, but I can't manage to find it, not even disabling my four add-ons (Adblock Plus, bookmarks-deiconizer, Customizable Shortcuts, YouTube to MP3). The Google forums are not finding a solution either. Anyway, thank you for trying.

  • Back to my mac doesn't work with Cable modem

    I have at home Cable modem and a Airport Extreme, both use NAT to distribute internet, so it seems even if I connect the cable modem direct to my home Mac (without the Airport) that the Back to my mac doesn't work. Can somebody tell me how can I turn around this problem? Doesn anybody has it too?
    The Back to my Mac panel displays this message when I have the Airport Extreme distribuiting the Internet: Back to My Mac isn't working properly because you may have more than one device on your network providing Network Address Translation (NAT). Try disabling NAT on one the devices.
    And without the Aiport: Back to My Mac isn't working properly because it requieres a router that supports NAT Port Mapping Protocol (NAT-PMP) or Universal Plug and Play (UPnP). Make sure your router supports one of these protocols and that it is enabled.

    If I may continue this thread, I have the same double NAT issue and am using a DSL modem/router combo. I added an Airport Extreme to my Qwest supplied Actiontec dsl Modem/Router in hopes it would solve issues with Back to my Mac, among other things. The dsl modem supports UPnP to some degree, but BtmM doesn't seem to like it.
    Currently the setup uses the DSL modem/router first in line, functioning as modem, NAT, router, but no DHCP (or wifi). That plugs into the WAN port of the Airport BaseSta. The Base Station runs in bridge mode, and distributes the ethernet and wifi connections. I would rather bridge the modem and disable its router functions, and let the Airport handle NAT and routing and wifi and Back-To-My-Mac.
    What are the alternatives? Any help appreciated!

  • My WORD for Mac doesn't work with latest upgrade. Any Remedy?

    Most recent update to OS caused WORD for MAC not to work.  Any Remedy?

    If you just updated to Mountain Lion (10.8) and you were using Office 2004, your best option is to find a newer Office replacement. Here are a few:
    Office 2008 or newer ($140 and up for the 2011 version; you may find 2008 used elsewhere)
    Apple Pages ($15)
    LibreOffice (free)
    Matt

  • Sony Bridge for Mac doesn't work with my Sony Xperia J

    I have installed Sony Bridge for Mac version 3.7.1, but it won't connect to my Sony Xperia J which I have only had for 3 months.
    I get the error "Could not connect to your Xperia device. Please disconnect and reconnect it again. Restart the device if the problem persists". All the time.
    I have tried all of the suggestions in the error message. I have also tried reinstalling Sony Bridge for Mac, to no avail.
    I am running Mac OS X 10.9.2 on an iMac. I am also using the correct USB lead - the one supplied with the phone.
    The Mac system log shows this error:
    Apr  3 20:42:35 robins-imac.default Sony Ericsson Bridge for Mac[973]: BUG in libdispatch client: kevent[EVFILT_WRITE] delete: "No such file or directory" - 0x2
    I suspect that whoever wrote Sony Bridge for Mac did not try it on OS X 10.9.2.
    I am seriously thinking of getting rid of this phone and getting one that works properly with the Mac - ie, not a Sony phone. Sony always seem to have problems with supporting Macs, for some bizarre reason.

    Hi Yorkshirecomposer,
    I will ask the development crew about the system log error. Additionally, could you provide me with error logs to send them as well?
    Here’s how to get error logs from Sony Bridge for Mac: 
    1. In BfM, hold the "alt" key down while selecting the "Phone" menu. Select "Clear logs" to remove all old logs and get a clean start
    2. Reproduce the problem you're having, whether it's connecting the phone, importing photos, doing backup...
    3. In BfM, hold the "alt" key down while selecting the ”Xperia” menu. Select "Export logs"
    4. On the computers desktop there should now be a file named "SonyBridgeForMacLogs_[date].zip
    5. PM that file to me or post the contents here
    Best Regards,
    David

  • Office 2011 Mac doesn't work with OS X Yosemite

    Who can help me with that problem. Was talking to the Microsoft hotline and they couldn't solve the problem. It doesn't really launch anymore. It doesn't open properly and looks like frozen.

    To follow up with another question. I was looking into uninstalling office and they say:
    Step 2: Remove the Microsoft Office 2011 folder
    On the Go menu, click Applications.
    Drag the Microsoft Office 2011 folder to the Trash.
    I do not know what they mean by the Go menu; I cannot believe how little I know .
    I hope you can help.
    Waiting to learn what to do next.

  • Trying to load illustrator 6cs onto new mac and the old activation code for my ill cs doesn't work with it

    Trying to load a downloaded version of illustrator 6cs onto new mac and the old activation code for my illustrator cs doesn't work with it.  Do I need a new code or am I missing something?  Same goes for my Photoshop cs.

    you need your serial number.
    if you purchased from or registered with adobe check your account, https://www.adobe.com/account.html

  • Apple Keyboard with number pad doesn't work with Mac Pro?

    I have a Mac Pro, and have used an Apple Keyboard with a number pad (not bluetooth) with it for quite a while, with no problems. But then my keyboard broke and I ordered a replacement Apple Keyboard with a number pad (not bluetooth). This keyboard doesn't work with my Mac Pro. I have it plugged in, but I can't get the Mac Pro to consistently recognize that there is a USB keyboard connected to it. What magical stuff do I have to do to get the keyboard to be fit for purpose?

    It would not hurt to try an SMC Reset. (But if it does not help, it adds credence to lllaass assertion that the keyboard is not working.)
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

  • Editting PDF documents that were created by a MAC doesn't work because of font incompatability.  How can we get MAC fonts and load in our Adobe Acrobat Pro 9?

    Editting PDF documents that were created by a MAC doesn't work because of font incompatability.  How can we get MAC fonts and load in our Adobe Acrobat Pro 9?

    If it's a Mac font and you're on Windows, you can't. If you are also on a Mac, you'll need to purchase the fonts (fonts are generally non-transferable, like software. One of the reasons pdf exists), install them and try your edits.
    But it's best to edit the original document and create a new pdf when finished.

  • I have 3 macs. 2 are Lion, 1 I left Snow leopard so I can access data from my old Quicken Application that doesn't work with Lion. If I move to iCloud, will I no longer be able to access my MobileMe email on the Snow Leopard mac?

    I have 3 macs. 2 are Lion, but 1 I left Snow leopard so I can access data from my old Quicken Application that doesn't work with Lion. If I move to iCloud, will I no longer be able to access my MobileMe email on the Snow Leopard mac?

    What version of word do you have? The TS3938 sounds like it's a PowerPC app- written for an old architecture that is no longer supported in Lion. If this is the case, your files are fine- you just need a newer version of word that will run in Lion in order to open them. The newest version (2011) should be readily available anywhere, and has worked fine for me ever since I switched to Lion on release day....

  • IPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

    iPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

    At least to 10.6.8. You must do this to upgrade to Mountain Lion.
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.

  • HT201343 My Mac book pro all of a sudden doesn't have the airplay icon and doesn't work with my Apple TV . Why  ?

    My Mac book pro all of a sudden doesn't have the airplay icon and doesn't work with my Apple TV . Why  ?

    The Airplay icon will not display if the OS is unable to locate any Airplay devices.
    I would check that both devices are connected to the same network and maybe even power cycle the network devices - eg router etc
    Maybe even try to connect both devices to another network like an iPhone personal Hotspot and see if that helps to isolate the problem

  • Push mail on iPhone doesn't work with my .mac address, all other accounts working fine. Does anybody experienced problems like this?

    Since upgrading to IOS 5 and using icloud my .mac account doesn't work with push anymore. I'am using two other mail accounts with push function and they work fine. I have heard from other users havong same problem, but does anybody have a solution to this? I have deleted the account and set it up again, worked for one test mail and then failed onwards..

    Since upgrading to IOS 5 and using icloud my .mac account doesn't work with push anymore. I'am using two other mail accounts with push function and they work fine. I have heard from other users havong same problem, but does anybody have a solution to this? I have deleted the account and set it up again, worked for one test mail and then failed onwards..

  • Lexmark scanner doesn't work with mac os x

    I have a problem with my scanner lexmark p4330. For two weeks now it doesn't work with my imac. I have the imac os x 10.7.5.
    When I try to scan, my printer displays "the all in one driver did not respond" and in Image Capture it displays "lexmark language error".
    I updated my softwares, there's one for lexmark but I can't install it and I don't know why!
    Can someone help me please?

    Mmm. Not sure what's going on. Has scanning ever worked with the OS you are currently running?
    A couple of suggestions (my last two I think as I'm running out of ideas ). I realise that your problems are only with scanning, but sometimes resetting the printing system resloves printing problems. I wonder whether it will help with the scanning issue given that Print & Scan are lumped together in System Preferences. To do it go to:
    System Preferences>Print & Scan, Control+Click or Right Click on the printer on the left and select 'reset printing system'. All printers will be deleted and need to be added again using the '+' button.
    If that doesn't help my last suggestion is to download the paid for app VueScan (which you can run in demo mode for free) to see whether it works or not. VueScan is very good and driving numerous types of scanners:
    http://www.hamrick.com

  • Quicklook doesn't work with .avi files

    Hello, i've got a little problem right here on my mac. The thing is that I used to have Snow Leopard as a OS and quicklook used to work great, it opened all the extensions I used to work with. The thing change when I format my HDD and installed a clean copy of Lion OS. Now quicklook works fine as it used to but not any more with .avi files. I remember that this feature was working great on my previous OS, and it's really important for me to find a solution because quicklook is an absolutely amazing feature of our Macs.
    I've tryed to download plugins, restoring permissions or even trying it with a guest user, but no success.
    Please help me. If you need more info about specs or something i'll be glad to give them to you.
    Thank you!!!

    Also doesn't work with Grapher (.gcx) documents (an Apple format).

Maybe you are looking for

  • Date wise planning

    Hi, How can i do date wise planning for quantity of a perticular activity. i.e, a activity called excavation is attchched to a WBS, its total qty is 500m3, i have given basic start and finish date for it. but how can i do date wise planning for qty f

  • Can't print A4 PDFs

    Hi I've stumbled upon an annoying issue with printing papers in the A4 size. This screenshot is from Reader 9.5.1, but I had the same problem in 10.1.3. Printer is set to print in A4, and the document is also in A4, and should print everything in the

  • Trouble syncing photos onto iPad and need help

    I recently purchased an iPad for a family member for Christmas and it had been working fine until last night. When they attempted to add another photo album to the already existing ones on the iPad, itunes ended the sync, when it says "syncing photos

  • How can I add a "junk mail" mailbox?

    How can I add a "junk mail" mailbox, or any other mailbox to my email?

  • Any support to create XML files?

    Hello, I was looking for functionality and support that OWB 10gR2 might offer in order to create XML files, containing relational data w.r.t a given definition. I did only find the packages that allow manipulation of XML data in tables and those two