WP3R does'nt have any roles even though the role transport is successfully

Hi,
I am trying to use centralized role administration.
I have a BI system configured to EP.
I had uploaded the portal roles from System Administration --> Permissions --> SAP Authorizations.
It finished successfully with some warnings.
Now, when i tried to check the role from the TCODE  WP3R the F4 help of Portal roles is showing empty.
How can i get the portal roles to ABAP system?
Thanks in advance.
Mr.Chowdary

Hi Johnny,
Please do perform the User comparison.
Goto PFCG  -> Role Name -> user comparision
then check in SUIM still user is having that Tcode or not .
for detail
Go to SUIM
Roles by complex selection criteria -> put Tcode there
it will give you Roles name having that tcode . and then you go to that Role and you will get list of Users in PFCG (User assignment Tab) .
same goes with User
SUIM - Users  by complex selection criteria - > put tcode -> Profiles associated with - > roles assosiated with it .
But i suggest after you make any changes to Role / Profile you please do user comparision .
Regards
Dishant Pathak

Similar Messages

  • I'm using a pc, (windows 8.1,) and I cannot get a thick and thin line with CS6. None of the brush tool settings have any effect, even in the preview. Is there a setting I need because I'm using a pc?

    I'm using a pc, (windows 8.1,) and I cannot get a thick and thin line with CS6. I want to draw, but I cannot get any linework like I should. I also use Sketchbook Pro, and ToonBoom, and I get wonderful linework. But not with Photoshop.
    None of the brush tool settings have any effect, even in the preview. Is there a setting I need because I'm using a pc and not a mac?

    Thanks for your response,
    I'm using a Fujitsu T901 laptop, with a stylus pen. Painting works great in Photoshop, but for drawing there is no sensitivity at all.  Frans Vischer
    author and illustrator of Fuddles, A Very Fuddles Christmas and Jimmy Dabble
    www.fransvischer.com
    pamperedfatcat.wordpress.com

  • My iPhone 5 does not show caller name even though the number is saved with a name in contacts

    My iPhone 5 does not show caller name even though the number is saved with a name in contacts

    Contact your carrier. Caller ID is a carrier feature.

  • Messaging Server 3.6 fails to start even though the Administration Server says "Success"

    Messaging Server 3.6 fails to start even though the Administration Server says
    "Success". There are no entries in the log to help explain what has happened.
    <P>
    Any failure to start Messaging Server via Administration should be analyzed by
    starting the server with /etc/NscpMail.
    <P>
    # /etc/NscpMail start
    19991219004527:Dispatch:Notification:Network Module (IMAP4-Server) Failed the verify environment test.
    Module not Loaded.
    Startup Problem:
    Problem Gaining Unique Lock
    Netscape Messaging Server Exiting!
    <P>
    This error is caused by an inability to create the .netscape.mailID file
    inside the top level of the postoffice.
    <P>
    # cd /var/spool/postoffice
    # ls -la
    total 30
    dr-x------ 8 nobody nobody 512 Dec 19 01:06 .
    drwxrwxr-x 13 root bin 512 Feb 12 1999 ..
    drwx------ 2 nobody nobody 1536 Dec 19 01:04 config
    drwx------ 2 nobody nobody 512 Dec 19 01:04 control
    drwx------ 3 nobody nobody 512 Dec 19 01:04 deferred
    drwx------ 2 nobody nobody 512 Dec 19 01:04 hold
    drwx------ 2 nobody nobody 5120 Dec 19 01:04 log
    drwx------ 2 nobody nobody 512 Dec 19 01:04 messages
    -rw-r--r-- 1 root other 183 Apr 12 1999 sie.conf
    -rw-r--r-- 1 root other 6 Dec 19 01:04 socket.dat
    <P>
    NOTE: The "." entry is the same as ls -l /var/spool/postoffice
    <P>
    # chmod u+w .
    # /etc/NscpMail start
    # ls -la
    total 32
    drwx------ 8 nobody nobody 512 Dec 19 01:04 .
    drwxrwxr-x 13 root bin 512 Feb 12 1999 ..
    -rw------- 1 nobody nobody 5 Dec 19 01:04 .netscape.mailID
    drwx------ 2 nobody nobody 1536 Dec 19 01:04 config
    drwx------ 2 nobody nobody 512 Dec 19 01:04 control
    drwx------ 3 nobody nobody 512 Dec 19 01:04 deferred
    drwx------ 2 nobody nobody 512 Dec 19 01:04 hold
    drwx------ 2 nobody nobody 5120 Dec 19 01:04 log
    drwx------ 2 nobody nobody 512 Dec 19 01:04 messages
    -rw-r--r-- 1 root other 183 Apr 12 1999 sie.conf
    -rw-r--r-- 1 root other 6 Dec 19 01:04 socket.dat

    Hi,
    Please check if you have disabled the autodisconnect feature of the Server service. On Windows servers it can be configured through the Autodisconnect registry key.
    \HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\
    CIFS and SMB Timeouts in Windows
    http://blogs.msdn.com/b/openspecification/archive/2013/03/19/cifs-and-smb-timeouts-in-windows.aspx
    Based on the research, as the open shared folder is in a SMB session, the default timeout for SMB session is 15 minutes. If the SMB session is inactive for 15 minutes the server will send a TCP reset to close the SMB connection. Until the
    Autodisconnect timer is reached, the server will send an NBT keep-alive packet every two minutes. If a client or server application is not written to properly handle network delays, it may terminate the session prior to the default timeout
    period.
    For more detailed information, please refer to the thread below:
    Session doesn't close Shared Folder
    https://social.technet.microsoft.com/Forums/en-US/54f658c8-3d41-4beb-9a2f-47b054a11b7a/session-doesnt-close-shared-folder?forum=smallbusinessserver
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Does anyone have any information on when the m audio fast track will support mountain lion?

    i have just got the latest 13" macbook pro and it came with mountain lion pre installed, in janurary i bought a brand new m-audio fast track audio interface as i saw it was available in the apple store and still is. however apple must be unaware they are selling a product that is not compatable with any of the computers available in the store as the drivers for the interface have not been released( there is one but it doesn't work and isn't the offical driver). m-audio were sold by avid earlier this year and the fast track i have is seeminly still avids problem despite m-audio being sold(so m-audio told me) and avid do not respond to any emails or tweets i have sent them. i tried to sort the issue out with apple customer care but they could provide no answers for me. i am now left with a usless audio interface, and appartantly(according to who i talked to on the phone) lion can't be installed on this model as it won't function correctly, not that i want to have to downgrade my operating system just for the use of an audio interface. so does anyone know whats going on?

    the driver was released on november 30th, thank god http://avid.force.com/pkb/articles/download/Fast-Track-Drivers

  • Since updating my bookmark toolbar is not showing any bookmarks even though the toolbar is there?

    Hi,
    On my Apple Mac version... 2 things have changed which I don;t understand why?
    1) Bookmarks do not show up on the "bookmark toolbar", even though there is a "tick" showing next to it on the menu - > View>Toolbars>Bookmark Toolbars (ticked)
    I have unticked.. then re ticked.. but this doesn't fix it.. even though you can see the area where it goes drops up or down according to whether it is ticked or not.
    So I cant drag a URL to the Bookmark toolbar anymore. @#$!
    2) My other problem is (which probably relates to the same issue) I have heaps of bookmarks on the the bookmarks toolbar... and the overflow goes to the drop down tab on the right hand side o tab area. This only shows current open tabs now.. I want my overflow bookmarks under that drop down tab like they use to...
    Can anyone help?
    == This happened ==
    Every time Firefox opened
    == Previous update

    Wow.. support level 'Zero' :(
    I have been to the 'Live Chat' section for support 7 times to see if I can resolve this... but it's been closed every time!!
    ... plus I haven't had single reply on this forum question since I posted it 7 days form a user or admin.
    Maybe it's time to use Safari :(
    Look forward to some sort of support! ???

  • Does anyone have any suggestions to improve the performance to improve Firefox for andoid (more details).

    I'm using it on a Samsung Captivate SGHi-897 with Jellybean 2.2 (I'm unable to upgrade the OS @this time). Firefox was recommended by a freind, however, so far I've been very disappointed with it, as, it is extremely slow and constanly crashes. I've tried all of the suggestions provided, but there is no improvememt. I realize it may be not all that compatible with this properly working device or OS. I have Samsung Galxaxy SGHi-727 Skyrocket with IC 4.1, however, I've been waiting for a part for it coming from Aisa, which seems to be taking forever, so in the meantime I'm.stuck with this. I was wondering if you may have any suggestions on how to speed it up and prevent it from crashing so much, other than what's on your help guide since those changes I've tried make no improvement in it's performance. I would very much prefer to use Firefox on this device, as well as, after I repair my other device for a number of other reasons, but if I'm unable to improve it, I'll just go back to what I was using. Thank you and be well.
    twich83115
    [ed. removed email]

    Suggestion for improvement:
    I'd like <select size="1" multiple> to provide a dropdown with checkboxes like this:
    http://demos.telerik.com/aspnet-ajax/combobox/examples/functionality/checkboxes/defaultcs.aspx
    Can that be done?
    Thanks

  • Since updating to 8.1.2 i now have no sounds even though the volume is set on max

    hi,my iphone 4s wont make any sounds when recieving calls or txt messages,also no keypad sounds since updating to 8.1.2  any ideas folks ?? thanks

    Hello there, Jon.
    When you can't hear sound from the built-in speaker on your phone, this Knowledge Base article offers up some great recommendations for troubleshooting:
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Follow these steps and test the sound after each one.
    Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
    If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
    Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
    Restart your device.
    Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
    Go to Settings > Bluetooth and turn off Bluetooth.
    If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
    If the device is in a case, make sure that the case doesn't block the speaker.
    Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
    Update your device to the latest version of iOS.
    If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I am not getting sound notifications when I receive text messages anymore.  A few will come through, but I have the volume on high and I will look down and see I have missed messages even though the phone is in my pocket or purse.  Is this common?

    Lately I have noticed that I am not receiving sound alerts when I receive an imessage or text.  This is intermittent, as it does not occur ALL the time, just frequently enough to be annoying.  Anyone else having this problem?  I just updated the IOS, but my friend says hers does the same, before and after the updat.

    Lately I have noticed that I am not receiving sound alerts when I receive an imessage or text.  This is intermittent, as it does not occur ALL the time, just frequently enough to be annoying.  Anyone else having this problem?  I just updated the IOS, but my friend says hers does the same, before and after the updat.

  • Time Machine doesn't show any backups even though the data is being backed up

    Time Machine is set to backup my Mac regularly and it seems to be doing so since the backups are being written to my backup disk.
    However, when I enter Time Machine, none of the backups in the past show up on the Time Machine screen.
    Is there a way to have Time Machine recognize the data it has backed up?

    I restarted my Mac and all's well.   Odd.

  • A webpage suddenly stops loading and just shows 'connecting...'. Opening new webpages in new tabs in the same window or in a new window gives same problem, while IE does not have any such problem opening the same page simultaneously

    this issue is not limited to one website, it seems to be problem with the browser or possibly any plugins but not any specific webpage

    The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
    Try to decrease the value of the pref <b>network.http.max-connections</b> from 255 to a setting like 30 as used in Firefox 3 versions.
    *https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites

  • Adobe Photoshop Album starter edition crashes every time I sync.  It worked fine the first time, but now it crashes and has to close.  Does anyone have any ideas on what the problem might be?

    This phone is about one month old.

    Have you ever had all 7 of them synced before? Are these ringtones you made yourself? Is there a chance they could exceed 30 seconds in length? Is there a chance you have moved the original file location on the computer? May need the answers to a couple more questions to try and determine an answer.

  • I recently purchased an iMac, learned the hard way that iDVD is not loaded, tried to copy iDVD from  my MacBook but came up short.  Each time I launched iDVD I got a message that I have no Themes even though the Mac I took it off runs just fine.

    Tried to load iDVD from my MacBook onto my new iMac but keep getting a message that it can find any themes.  iDVD runs just fine in the MacBook but for some reason when I copied it from the MacBook using a flash drive and download it on the iMac the themes went away.  Suggestions?

    The themes, when installed, will be in a Themes folder inside the HD/Library/Application Support/iDVD folder.  Check there and when you find it copy it to the same folder on your new Mac. 
    Then go to iDVD's advanced preference pane and point iDVD to the location of the Themes folder:
    If you can't find the Themes folder on your old Mac you can do a custom install of iDVD and its  resources from the disk that came with the old Mac. It will look similar to one of these:
    OT

  • I recently upgraded to Fios Quantum and have a new ActionTech router. As a result my PC is no longer communicating with my APPLE TV.It must have a firewall or ports beegin blocked preventing the homesharing and communication even though the APPLE TV is on

    I recently upgraded to Verizon Fios Quantum high speed internet and was given an ActionTec router. I sucessfully installed all and connected wth my Apple TV. Although it worked initially it no longer does.  Something appears to be blocking  the Homesharing between my PC and the AppleTV even though the Apple TV is successfully connected to my home network. I spoke with an Apple Support Tech who was unable to help me becuase I have a PC! He admitted this is a common problem with FIOS and PCS. There must be a port that needs to be opened in the router. I do not beleive it is anything to do with my antivirus software or Windows Defender as i uninstalled all and still not communication. Must be a port within the routter that is blocking tis communication. On my Itunes you can see that it does not see the Apple TV. Please advise.

    I'd have to agree. I set my vms and two clients on Saturday in one hour. I think the picture is better I did not see an issue with the brightness. For the heck of it I recorded five channels at once to test it. I've also noticed when playing a recorded show on the client everything responds a lot quicker. So I am impressed and curious to see what new features come later.
    Kudos to verizon.

  • WSDL for WSDL based Proxy that does not have any input

    Hi all,
    I am trying to create a service which is based on a db adapter. The db adapter is created using a procecure that does not accept any input and gives out a cursor. I have created a
    proxy based on a wsdl which was created by me. I have not given any soap:body in the input as I dont have any input for this service. When I test the service it is not going into the
    request pipeline instead what ever the input (Here input in the sense even the proxy does not have any input as per the wsdl we need to give some xml tag to test it right?)
    to the proxy service is getting echoed back. It is neither going inside the request pipline nor Invoking the business service. When I create a proxy service as a plain xml then It is
    working fine. I am very confused and donno what to do.. Kindly help me on this.
    thanks
    Edited by: 887737 on Apr 5, 2012 4:20 AM
    Edited by: 887737 on Apr 5, 2012 4:21 AM

    it depends on the selection algorithm you have on the proxyservce
    on the fourth tab you can dispatch based on soapaction/body/header/etc
    you could dispatch on the soapaction and skip the body

Maybe you are looking for