WPA - adding the shared key to XP Home?
I'm using WPA security on a client computer with Win XP Home (not XP pro). I'm failing to get a connection. It works just fine with WEP, therefore the connections are correct; however, WPA doesn't work and this is because the client seems to only support WEP! This is my WPA key as stated by my Linksys:
This is my client computer trying to input the WPA shared key, but the only input screen I see is for WEP, shown here:
Inputting the WPA shared key in the WEP column doesn't work and tells me it needs to be 5 or 13 characters ascii or 10 or 26 characters hexadecimal. Can anyone tell me where to add my WPA in Windows XP Home? Thanks =).
Ahh okay, I figured it out. I tried installing the latest network drivers, but that didn't work. Instead, what DID work was installing service pack 2, thus enabling the option to change my connections network security. I only had sp1 installed because I reformatted the hard drive earlier.
Personally I think this is dumb on Microsoft's part. How do they expect a person without Internet to get sp2?..... Purchase the sp2 disc? The way I got around it was temporarily enabling WEP mode via my router and client connection, getting the sp2 update, then switching the router and client to the now enabled WPA mode; however, this was a major hassle imho.
Anyways, I appreciate the help, thanks =).
Edit: Oh and btw, I changed the password, as you recommended =).
Message Edited by ReMeDy on 01-05-2008 11:28 PM
Similar Messages
-
How do I not sync notes with my email? I have a business email on my iphone as well as my husbands iphone. Now all of my notes are on his phone, and all of his notes he previously has on his iphone are gone. We have never adjusted any settings or hooked it up to itunes, I only added the shared email account to his phone. Help???
Hi StoneLeadyFarms,
Thanks for visiting Apple Support Communities.
It sounds like notes on your devices may have synced when the email account was added, as described here:
iOS: Syncing Notes
http://support.apple.com/kb/HT4191
Notes are associated with an IMAP email account or iCloud account. To sync Notes, enable Notes for each account in Settings > Mail, Contacts, Calendars or Settings > iCloud.
You can stop syncing notes by tapping Settings > Mail, Contacts, Calendars or Settings > iCloud, tapping the email address that you added, and switching Notes to the off position.
Additionally, if your husband has backed up his iPhone to iTunes or iCloud, the steps in this article can help with recovering the lost notes from his device:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Best Regards,
Jeremy -
Special characters in the shared key when importing firewalls
Hello
We are using CWVMS to import and configure PIX firewalls.
The shared isakmp key of one of the firewalls has not been accepted during import because it contains special characters.
The problem is that the customer does not have authority to change the key.
Does Management Center for Firewalls really accept only alphanumeric isakmp keys ? Is there another alternative to changing the key ?
Thank you sincerely for your help.I am not sure what your problem is. But ISAKMP keys can be changed directly on the PIX using the command line interface. I have not used any special character in the ISAKMP keys. Can anyone confirm that special characters can be used within ISAKMP keys?
-
Adding the Extra Key Figure in Infocube which has already data.
Hi BW Experts,
We have Purchasing Data Cube (0PUR_C01). I have already loaded the data into Infocube.
And we have made some reports on Purchasing Cube.
Now user wants a modification in the report.
He wants a extra information in the Report. But that information will be coming from one KEY FIGURE. But this Key Figure is not there in Our InfoCube.
But This Key Figure is there in our Transfer Rules.
I can add the Key Figure in Infocube. But already data is there in our Infocube.
I dont want to delete the data from Infocube. 2 crores records are there.
Please can any one tell me the solution for the further process.
Please help us with the solution.
Thanks & Regards,
AnjaliAnjali,
If you are using BW 3.x version then you have to delete the data if you want to add a new Key figure, In this case you need to create a cube from copy as option and load the data into that cube and you can enhance the cube with a new Key figure..
If you are using BI 7 then you can do that in RSA1 -> administation Sub function area -> Remodelling option
<Stop asking for points on each reply>
Thanks,
Gattu
Message was edited by:
Moderator -
HT4352 Where do I find the advanced key for home sharing
Where would I find the Advanced key for Apple home sharing
There is no "Advanced" key for Home Sharing. Try reading the article again.
-
Netcfg problem with wep shared key
hello guys,
I would like to connect to a wireless device with netcfg. The device has a WEP encryption with shared key authentication. I'm able to connect using the gnome nm-applet, but with netcfg i keep getting the "Wireless association failed" error.
My config file for netcfg:
CONNECTION="wireless"
DESCRIPTION="A simple WEP encrypted wireless connection"
INTERFACE="wlan0"
SECURITY="wep"
ESSID="[essid]"
KEY="s:[password]"
IP="dhcp"
May the problem lie in the shared key authentication? I tried
IWCONFIG="enc restricted"
but it still doesn't work. I have an intel 3945 wireless card.
Any help is appreciated,
thanks.what puzzles me is that
1) i'm able to connect to the same device if I set the open authentication,
2) I'm able to connect if I set the WPA protection, and
3) I'm even able to connect (with WEP and shared key authentication) using gnome nm-applet.
The only problem I have is with netcfg and iwconfig, so i'm asking if iwconfig has a specific problem with shared authentication and if there is a way to handle it. -
Encode shared key signature in Azure Storage Queue
I'd like to use Azure storage REST api for queue, and in order to add the authentication infomation to the http header, I have to get the shared key.
From http://msdn.microsoft.com/en-us/library/azure/dd179428.aspx, I saw the string to sign like this:
I found it was very strange, I prefer it's C# code, and some place "\n" missed and so is "+", as I made up all stuffs, the authentication still failed, I do not know why, here is what I did:
using (var httpClient = new HttpClient())
var verb = "PUT";
var contentEncoding = "";
var contentLanguage = "";
var contentLenght = "0";
var contentMd5 = "";
var contentType = "text/plain; charset=utf-8";
var date = DateTime.UtcNow.ToString("R", CultureInfo.InvariantCulture);
var ifModifiedSince = "";
var ifMatch = "";
var ifNoneMatch = "";
var ifUnmodifiedSince = "";
var range = "";
var canonicalizedHeaders = "";
var canonicalizedResource = "";
var stringToSign = verb + "\n" + contentEncoding + "\n" + contentLanguage + "\n" + contentLenght + "\n" +
contentMd5 + "\n" + contentType + "\n" + date + "\n" + ifModifiedSince + "\n" +
ifMatch + "\n" + ifNoneMatch + "\n" + ifUnmodifiedSince + "\n" + range + "\n" +
canonicalizedHeaders + "\n" + canonicalizedResource;
httpClient.BaseAddress = new Uri(string.Format("https://{0}.queue.core.windows.net", accountName));
httpClient.DefaultRequestHeaders.Clear();
httpClient.DefaultRequestHeaders.Add("Authorization", string.Format("SharedKey {0}:{1}", accountName, Hash(accountKey, stringToSign)));
httpClient.DefaultRequestHeaders.Add("x-ms-date", date);
var result = httpClient.PutAsync("myqueue", new StringContent(""));
result.Wait();
static string Hash(string message, string secret)
var messageBytes = Encoding.UTF8.GetBytes(message);
var secrectBytes = Encoding.UTF8.GetBytes(secret);
using (var hash = new HMACSHA256(secrectBytes))
var hashMessage = hash.ComputeHash(messageBytes);
return Convert.ToBase64String(hashMessage);
Anyone can help me?Hi,
Please try this code, I tested it on my side, it works fine.
String accountName = "***";
String accountKey = "***+**";
String signature = "";
String requestMethod = "POST";
String urlPath = String.Format("{0}/messages", "inputtext");
String storageServiceVersion = "2012-02-12";
String dateInRfc1123Format = DateTime.UtcNow.ToString("R", CultureInfo.InvariantCulture);
String messageText = String.Format(
"<QueueMessage><MessageText>{0}</MessageText></QueueMessage>", "test2");
UTF8Encoding utf8Encoding = new UTF8Encoding();
Byte[] messageContent = utf8Encoding.GetBytes(messageText);
Int32 messageLength = messageContent.Length;
String canonicalizedHeaders = String.Format(
"x-ms-date:{0}\nx-ms-version:{1}",
dateInRfc1123Format,
storageServiceVersion);
String canonicalizedResource = String.Format("/{0}/{1}", accountName, urlPath);
String stringToSign = String.Format(
"{0}\n\n\n{1}\n\n\n\n\n\n\n\n\n{2}\n{3}",
requestMethod,
messageLength,
canonicalizedHeaders,
canonicalizedResource);
using (HMACSHA256 hmacSha256 = new HMACSHA256(Convert.FromBase64String(accountKey)))
Byte[] dataToHmac = System.Text.Encoding.UTF8.GetBytes(stringToSign);
signature = Convert.ToBase64String(hmacSha256.ComputeHash(dataToHmac));
String authorizationHeader = String.Format(
CultureInfo.InvariantCulture,
"{0} {1}:{2}",
"SharedKey",
accountName,
signature
Uri uri = new Uri(string.Format("https://{0}.queue.core.windows.net/", accountName) + urlPath);
HttpWebRequest request = (HttpWebRequest)WebRequest.Create(uri);
request.Method = requestMethod;
request.Headers.Add("x-ms-date", dateInRfc1123Format);
request.Headers.Add("x-ms-version", storageServiceVersion);
request.Headers.Add("Authorization", authorizationHeader);
request.ContentLength = messageLength;
using (Stream requestStream = request.GetRequestStream())
requestStream.Write(messageContent, 0, messageLength);
using (HttpWebResponse response = (HttpWebResponse)request.GetResponse())
String requestId = response.Headers["x-ms-request-id"];
Also, you could see this page:http://convective.wordpress.com/2010/08/18/examples-of-the-windows-azure-storage-services-rest-api/
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Nokia 5800 and wpa shared key problem
I've got an Orange livebox as a router. When trying to connect the wi-fi I'm asked for a WPA shared key. I input the WEP key of the Live box and it comes up as invalid WPA key. I have put in the right number and 'paired' the livebox with pressing button 1. I've also reset the phone and livebox with no result. Is the WPA key the same as the WEP key? Anyone know the answer?
Hi,
I've got a livebox also. When I was setting up my wifi I was asked for "pre shared key" on the 5800 which is your WEP No on the bottom on the livebox.
I tapped that in (make sure you use caps) pressed "1" on the livebox then select on the phone.
Worked first time for me. -
I use SpeedPort W700V from German Telekom as router for my WiFi and DSL access. DSL connection to Internet is proper running, WiFi with iPAS does only work if I switch of the Encryption mode of SpeedPort (Standard parameter in SpeedPort is WPA2 with shared key PSK). Who can give a hint how to switch on the encryption / deencryption mode of iPAD 2. 3G Sim Card is currently not installed.
Thanks for the quick response. No, I did not get any error messages or any terms-of-usage screen. The employee I told my problem to was not computer savvy either. She just suggested I move to different spots w/in the library to see if that would make a difference. It didn't. When I connected to the library WiFi it did change the Verizon 3G that is usually in the upper left corner to iPad with two to three emanating arcs. I may have to go to the library in the next town. I was able to connect to theirs in the past when I had to download something greater than 20 MB. Unless I really want it, I will probably not even try to download something more than 20 MB due to the hassle. Yeah, I may have been better off getting a normal desktop or laptop and getting WiFi at home. To do that now would mean having my iPad 2 and a desktop computer, which I feel is extravagant. (I know there are a lot of big spenders out there who got the iPad as additional gadget for fun. This is a rich country.) A Verizon rep told me I couldn't set up a WiFi router at home just using an iPad. So it seems like a person who just uses 3G is limited to surfing the net (not even much YouTube because it eats a lot of data) and using email. I read about an app that helps print wirelessly using 3G, but a reviewer said you had to be an engineer to get it done right. BTW, I like the Steelers. I'm old enough to remember Franco Harris and that blond guy whose name escapes me back in the '70s. Since I live in North Jersey I feel I have to support the Giants. But I know football about as well as computers.
-
Here's the situation:
Upgrading a SharePoint Server 2010 Search Service Application dB to our SharePoint 2013 SP 1 development environment, using the Management Shell
Running the following commands:
$applicationPool= Get-SPServiceApplicationPool -Identity 'SearchService_AppPool'
$searchInst = Get-SPEnterpriseSearchServiceInstance -local
Restore-SPEnterpriseSearchServiceApplication -Name 'SearchServiceApplication' -applicationpool $applicationPool -databasename 'SearchServiceApplicationDB' -databaseserver SERVERNAME -AdminSearchServiceInstance $searchInst
Creates the search dBs (crawl, links, analytics) successfully; however, in the end, I get....
"Exception: Action 15.0.107.0 of Microsoft.Office.Server.Search.Upgrade.SearchAdminDatabaseSequence failed."
Looking at the ULS logs, I find the following:
Inner Exception: An item with the same key has already been added.
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add) at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.FindAndFixExistingManagedProperties() at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.InstallManagedProperties(Boolean
upgrade) at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.Upgrade() at Microsoft.Office.Server.Search.Upgrade.UpdateAllOOTBProperties.Upgrade() at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
Exception: Action 15.0.107.0 of Microsoft.Office.Server.Search.Upgrade.SearchAdminDatabaseSequence failed.
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade() at Microsoft.SharePoint.Upgrade.SPDatabaseSequence.Upgrade() at Microsoft.Office.Server.Search.Upgrade.SearchDatabaseSequence.Upgrade() at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object
o, Boolean bRecurse)
Anyone encounter anything like this during their search upgrade process? I'm not honestly even sure what duplicate value to look for at this point, if I were to run a SELECT Id, ClassId, ParentId, Name, Status, Version, Properties FROM Objects on
"SharePoint_Config" in SSMS. Any insight or opinions on the matter are welcome; and thanks to those who choose to reply to this, in advance.Hi ,
You can enable the ULS log on verbose level (note, remember to reset to default level after finished troubleshooting) for more information per the following article, then check there should be more useful message for helping solve the issue.
http://www.brightworksupport.com/enabling-verbose-logging-to-compare-against-c/
http://social.technet.microsoft.com/Forums/sharepoint/en-US/12c99279-d3aa-46de-bc57-d5d250692ff0/upgrade-of-search-service-application-from-2010-to-2013-failure?forum=sharepointadmin
https://www.simple-talk.com/blogs/2014/04/22/sharepoint-2010-to-2013-search-service-application-upgrade-issueaction-15-0-80-0-fails/http://blogs.msdn.com/b/biyengar/archive/2009/10/27/psconfig-failure-with-error-an-item-with-the-same-key-has-already-been-added.aspx
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support -
I am trying to move my itunes library from my old pc to my new imac, home sharing is on and I can see the shared library. My problem is that when I check the shared library to import it to my imac I cannot import it. Can anyone help me?
You need to transfer the iTunes Library from the most recent backup you made before the hard drive was replaced.
You can't transfer the full iTunes Library from the iPad back to iTunes.
There are third-party Windows applications that will transfer data from an iOS device, but they don't re-create the iTunes Library exactly as it was before. -
Hi there,
I recently had the following situation, where I changed the source of my CSV file in Power Query.
Once I had reloaded the file, it would then not load into Power Pivot. So I disabled the loading from Power Query into Power Pivot. I then enabled the loading to the Data Model. Which then successfully loaded the data into Power Pivot.
But once I went into Power Pivot, had a look, then saved the Excel file. Once saved I closed the Excel file. I then opened the Excel file again and all the sheets that interact with the Power Pivot data work fine.
But if I go and open Power Pivot I get the following error: Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added.
This is what I get from the Call Stack
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
at Microsoft.AnalysisServices.Common.LinguisticModeling.SynonymModel.AddSynonymCollection(DataModelingColumn column, SynonymCollection synonyms)
at Microsoft.AnalysisServices.Common.LinguisticModeling.LinguisticSchemaLoader.DeserializeSynonymModelFromSchema()
at Microsoft.AnalysisServices.Common.SandboxEditor.LoadLinguisticDesignerState()
at Microsoft.AnalysisServices.Common.SandboxEditor.set_Sandbox(DataModelingSandbox value)
at Microsoft.AnalysisServices.XLHost.Modeler.ClientWindow.RefreshClientWindow(String tableName)
I would assume that the issue is with the synonyms and for some reason, when I disabled the loading of my data into the Power Pivot Model, it did not remove the associations to the actual table and synonyms.
If I renamed the table in Power Pivot it all works fine. So that was my work around. Fortunately I did have a copy of the Excel workbook before I made this change. So I could then go and add back in all the relevant data to my table.
Has anyone had this before and know how to fix it?
http://www.bidn.com/blogs/guavaqHi there
I can share the work book, if possible to send me an email address. As the workbook size is about 9Mb.
Thanks
Gilbert
http://www.bidn.com/blogs/guavaq -
Crawl Error GetVirtualServerPolicyInternal - An item with the same key has already been added
Hi,
I did an index reset and now I can't start any crawl. It's complaining "An item with the same key has already been added". Exception seems to from Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicyInternal.
What should I check? Thanks.
The SharePoint item being crawled returned an error when requesting data from the web service. ( Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: 9e69ff9c-f925-50bf-5110-d1b0e74c77bc; SearchID = 522CB441-0028-4E7D-BED4-4230D7ADD14B
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dm1k Medium Exception Type: System.ArgumentException *** Message : An item with the same key has already been added. *** StackTrace: at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean
add) at Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicyInternal(String strStsUrl, WssVersions serverVersion, sPolicyUser[]& vUsers, sPolicyUser& anonymousUser, String&
strVersion, String[]& vServerWFEs, Boolean& fIsHostHeader, Boolean& fIsAllUsersNT, Boolean& fIncludeSiteIdInCompactURL) at Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicy(String
strStsUrl, sPolicyUser[]& vUsers, sPolicyUser& anonymousUser, String& strVersion, String[]& vServerWFEs, Boolean& fIsHostHeader, Boolean... 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93* mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dm1k Medium ...& fIsAllUsersNT, Boolean& fIncludeSiteIdInCompactURL) 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
fsa0 Monitorable GetVirtualServerPolicy fail. error 2147755542, strStsUrl
http://serverurl 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dvt6 High SetSTSErrorInfo ErrorMessage = Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7 hr = 80042616 [sts3util.cxx:6988]
search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dvi3 High Couldn't retrieve server
http://serverurl policy, hr = 80042616 [sts3util.cxx:1865] search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dvu0 High STS3::StoreCachedError: Object initialization failed. Message: "Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7"
HR: 80042616 [sts3util.cxx:7083] search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dvg4 High Server serverurl security initialization failed, hr = 80042616 error Message Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7
[sts3util.cxx:1591] search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dv5x High CSTS3Accessor::InitServer: Initialize STS Helper failed. Return error to caller, hr=80042616 [sts3acc.cxx:1932] search\native\gather\protocols\sts3\sts3acc.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dv3t High CSTS3Accessor::InitURLType fails, Url
http://serverurl, hr=80042616 [sts3acc.cxx:288] search\native\gather\protocols\sts3\sts3acc.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dvb1 Medium CSTS3Accessor::Init fails, Url
http://serverurl, hr=80042616 [sts3handler.cxx:337] search\native\gather\protocols\sts3\sts3handler.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dvb2 Medium CSTS3Handler::CreateAccessorExD: Return error to caller, hr=80042616 [sts3handler.cxx:355] search\native\gather\protocols\sts3\sts3handler.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Crawler:FilterDaemon
e4ye High FLTRDMN: URL
http://serverurl Errorinfo is "Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7" [fltrsink.cxx:566] search\native\mssdmn\fltrsink.cxx
04/22/2015 19:37:10.93 mssearch.exe (0x1118) 0x0628 SharePoint Server Search Crawler:Gatherer Plugin
cd11 Warning The start address http://serverurl cannot be crawled. Context: Application 'Enterprise_Search_Service_Application', Catalog 'Portal_Content' Details: The SharePoint item being
crawled returned an error when requesting data from the web service. (0x80042616)
04/22/2015 19:37:10.99 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search Fuzzy Name Search
ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. ab403221-f69c-43ef-a8cc-7df384f6a4b3
04/22/2015 19:37:10.99 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search Fuzzy Name Search
ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. ab403221-f69c-43ef-a8cc-7df384f6a4b3
04/22/2015 19:37:10.99 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search Fuzzy Name Search
ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. ab403221-f69c-43ef-a8cc-7df384f6a4b3
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search Fuzzy Name Search
ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search Fuzzy Name Search
ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search Fuzzy Name Search
ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search Fuzzy Name Search
ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. e15da110-f86d-4e3d-8d73-a67dccaa82cd
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search Fuzzy Name Search
ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. e15da110-f86d-4e3d-8d73-a67dccaa82cd
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search Fuzzy Name Search
ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. e15da110-f86d-4e3d-8d73-a67dccaa82cd
04/22/2015 19:37:11.03 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search Fuzzy Name Search
ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. 58d54385-497b-466d-9f02-aeba664bc1b6
04/22/2015 19:37:11.03 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search Fuzzy Name Search
ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. 58d54385-497b-466d-9f02-aeba664bc1b6
04/22/2015 19:37:11.03 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search Fuzzy Name Search
ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. 58d54385-497b-466d-9f02-aeba664bc1b6Hi,
For troubleshooting your issue, please take steps as below:
1. Try to crawl your content source using farm admin account.
2.
Disable loopback check .
3.Add reference SPS3s://WEB into your content source start addresses.
For more information, please refer to these blogs:
http://sharepoint.stackexchange.com/questions/5215/crawling-fails-with-404-error-message-but-the-iis-log-tell-a-different-story
http://www.cleverworkarounds.com/2011/07/22/troubleshooting-sharepoint-people-search-101/
http://blogs.msdn.com/b/biyengar/archive/2009/10/27/psconfig-failure-with-error-an-item-with-the-same-key-has-already-been-added.aspx
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Shared tab in left menu column does not show on one of the computers after setting up Home Sharing
For iTunes 10.3, I have set up home sharing on two computers that run windows 7, I have authorized both computers. The iTunes Shared link for computer 2 shows up on left column for computer 1(main iTunes computer). The problem I am having is that the Shared link for computer 1 DOES NOT show up on computer 2. My network between the both computers is working because I am able to pull/copy music files from computer 1 to computer 2. Why doesn't the Shared link for Computer 1 show up on Computer 2 Itunes left column? Any help would be most appreciated. Thank you.
Nothing had changed when I plugged in my iPod at work today, having changed it to manage manually earlier at home. But after rebooting a few minutes ago, iTunes cranked up and updated the library. The library now appears below DEVICES/iPod on the menu instead of under LIBRARY/Music at the top left, which I'm pretty sure is different from before, but no matter. Also the iPod is still not appearing in My Computer but again, no matter. I am able to play my tunes on the work install of iTunes now and use iDump (which is a helluva lot less trouble than iTunes) to extract them.
Thanks again for all the help.
HP Pavilion, Dell Optiplex Windows XP -
I just got a MacBook Pro and I used Home Sharing to transfer my library from my PC. However, my PC's battery died in the middle of the process so only half of my music was transferred. The sharing option no longer shows up on the left. Do I need to start completely over and delete the content in my new library to prevent duplicates or is there a way to continue the process?
I just got a MacBook Pro and I used Home Sharing to transfer my library from my PC. However, my PC's battery died in the middle of the process so only half of my music was transferred. The sharing option no longer shows up on the left. Do I need to start completely over and delete the content in my new library to prevent duplicates or is there a way to continue the process?
Maybe you are looking for
-
Need help: My ipod touch will not sync any apps or music after resotre, pc is authorized , can't de autorize until this coming august?
-
SFWordProcessing plug-in err only on one of my pages in iWeb
at first i couldnt even open iWeb without crashing. hoefler font fix didnt help. then i mored the com.apple.iWeb... file to desktop which did work. however, once in iWeb, if i so much as click or right-click on one of my web pages, it crashes immedia
-
When do the hard drives go to sleep?
I have the default power saver settings on my Mac Mini with Yosemite. One of the options is "Put hard disks to sleep when possible" which I currently have checked. The trouble I have been trying to get through a ClamXav virus scan on my machine since
-
Installing Firefox on my computer
I can't download, let alone actually install firefox. After I select save, a box appears asking whether I wish to do this as the administrator, asking for a password, or as myself. I select myself, the box goes away, as does the whole download proces
-
Where's the erase key when typing voicemail password?
When checking my voicemail, the keypad that shows up to let me type my password has no erase/backspace key. How can I correct a mistyped number without having to exit each time?