WPA connection problems

I tried connecting to my home network, which is protected with a WPA password - however, i forgot what it was and typed in an incorrect one 3 times before checking from the keychain access what it should be.
Unfortunately, when i now go on to join the network, i can put in the password but the 'join' button is greyed out.
How can i fix this?
Oh, and it's an Airport base station (54Mbps).

Ok, I've played around with it a bit, and it does seem to have something to do with the password.
I dropped the encryption on the network to test whether that was why it didn't connect, and it connected fine to the open router. Now, when I put WPA Personal encryption back on, it still doesn't let me put a password in again! Even though I put a different one on...
I don't want to leave it open, and don't want to use WEP either (because anyone with a bit of software and 5 minutes to spare can break the encryption) - so what can I do to get it working again?

Similar Messages

  • N95 Wifi WPA connection problem

    I recently bought the Nokia N95 and everything is working except the wifi WPA part. I DL the latest firmware (v20.0.015) but that didn't help.
    Everytime i connect with my home wifi lan it asks for a password. It doesn't matter what password i try it says "invalid pre-shared wpa key" So even simple passwords like "12345678" or "merryxmas" don't work. If i change from WPA-PSK to WEP 128 bit WEP key then it works ???
    This must be a N95 error ? I also tried tkip and aes but that didn't help. My Phone AP settings r:
    Network - public
    WPA/WPA-2
    Pre-shared key
    WPA-2 only - off
    Does anybody has a working WPA wifi N95 ???

    If I connect to the PC as "Mass Storage" I can see the phone as a removable disk and go into the file structure, just as I could in PC Suite mode. However, if try to drag and drop a file from my N95 to the desktop the phone bleeps intermittently every 2-10 seconds, the USB connection icon on the phone display will blink in time to the phone bleep. The "Copying" bar on the PC shows the file transfer occurring but extremely slowly. E.g. A 4Mb MP4 showed 3 minutes on the progress bar but after 10 minutes was barely a sixth of the way through.
    It appears that the connection betweeen the phone and PC is only active when the phone bleeps, in the periods of silence there is seemingly no activity. I think this because if I look at the file structure on the phone, while the trasfer is taking place, the window will freeze until the next bleep of the phone.
    Maybe someone can recommend a brand and model USB2.0 PCI card (preferably also with firewire) so that I can buy one that I know works?

  • [Solved] WPA connection problems - network was WEP encrypted.

    Hi all, and thanks in advance for reading.
    Tl;dr for the below: My card seems to work, but won't associate with the router using either netcfg or wpa_supplicant and I have no idea why. I have no graphical system to work from as yet.
    Basically, I've just installed my Arch system, and I'm trying to get the wireless working. I have two wireless cards, one internal (Atheros) and one USB (preferred - it's a Belkin F5D9050, v3). My router - a BT HomeHub - uses WPA-PSK encryption.
    For the moment, I'm trying to get the Belkin card - wlan1 - working as it gives better reception at home, so I'll use that in the examples, but I've had the same results with both so far.
    Running
    iwlist wlan1 scan
    shows my network, so I think the card itself is working ok.
    My netcfg profile reads:
    CONNECTION='wireless'
    INTERFACE='wlan1'
    SECURITY='wpa'
    ESSID='BTHomeHub2-2J6S'
    KEY='...'
    IP='dhcp'
    TIMEOUT=120 // Large timeout I know, but apparently it can make a difference.
    When attempting to connect with netcfg, I get the message 'WPA Authentication/Association failed'.
    Trying with wpa_supplicant.conf as below:
    network={
    ssid="BTHomeHub2-2J6S"
    proto=RSN // I've also tried WPA2
    key_mgmt=WPA-PSK
    pairwise=CCMP TKIP
    group=CCMP TKIP
    psk=[my passphrase as converted to hex by wpa_passphrase]
    Running
    wpa_supplicant -dd -B -Dwext -iwlan1 -c/etc/wpa_supplicant.conf
    produces output similar to this.
    I'm stuck. Any thoughts? Any and all help is appreciated!
    Thanks in advance!
    (Edited for stupid title)
    Last edited by Owen Tuz (2010-09-19 23:17:16)

    If you inspect
    iwlist $interface scan
    output you can see which ones are WEP or WPA(2):
    WEP:
    Cell 04 - Address: xx:xx:xx:xx:xx:xx
    Channel:6
    Frequency:2.437 GHz (Channel 6)
    Quality=21/70 Signal level=-89 dBm
    Encryption key:on
    ESSID:"WiFi 13"
    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
    9 Mb/s; 12 Mb/s; 18 Mb/s
    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
    Mode:Master
    Extra:tsf=0000013713e511a8
    Extra: Last beacon: 2493ms ago
    WPA2 Personal:
    Cell 03 - Address: xx:xx:xx:xx:xx:xx
    Channel:48
    Frequency:5.24 GHz (Channel 48)
    Quality=65/70 Signal level=-45 dBm
    Encryption key:on
    ESSID:"Zeus 802.11n"
    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
    36 Mb/s; 48 Mb/s; 54 Mb/s
    Mode:Master
    Extra:tsf=0000011fcd6018a8
    Extra: Last beacon: 60ms ago
    IE: Unknown: 000C5A657573203830322E31316E
    IE: Unknown: 01088C129824B048606C
    IE: Unknown: 030130
    IE: IEEE 802.11i/WPA2 Version 1
    Group Cipher : CCMP
    Pairwise Ciphers (1) : CCMP
    Authentication Suites (1) : PSK

  • HP Deskjet 460 wireless printer connection problem

    I just replaced my Airport Extreme (pre-n) with a Time Capsule. My HP Deskjet 460 WiFi printer no longer connects through wireless. However, configuring the Time Capsule wireless mode to "802.11g/b only" (i.e. no 802.11n) resolves the connection problem.
    Any suggestion on how to get the printer to connect with 802.11n enabled?
    Thanks in advance,
    - gael

    I also have an HP 460wbt and have similarly replaced my old airport base station with the TC. Without any wireless security the printer connected fine - but couldn't get connection using WPA or WEP. I've tried every combination I can - but have gone back to reconnecting the airport base station alongside the TC with bridging to the ADSL netgear modem I use. This seems a bit like overkill but I just can't get the WPA on the printer to work with the WPA personal options of the TC. Have you any ideas on this one?

  • IPad 2 Wi-fi connection problems

    I am lately encountering this problem with my internet wi-fi connection. It keeps dropping the signal. When I go to Settings to re-connect, it demands the password everytime. After entering the password, every single time there is the message: "Failure to connect" and on the second re-try it works. When I come home after work, the iPad does not automatically connects to the wi-fi. I have to connect it myself everyday then enter the password again and again.
    After the connection, I can use my apps that require the internet (until the signal drops again) but there are no notifications from my apps. At the same time, I connected to the 3G internet and all my notifications appeared which were supposed to appear when I connected to the wi-fi. I have the iPad on recharge every night. The next morning when I check my notifications, most of them appeared at the same time (when the wi-fi was working fine). For example, I had a game update that such and such thing is ready 46 minutes ago when it should have been 3 hours before.
    Someone suggested to try the "Forget this network" but there is no improvement.
    To fix this, I have tried to restart the iPad. I have reset the network settings. Nothing helps
    In short,
    1) I have to enter password every time I connect
    2) Signal keeps dropping
    3) The notifications don't appear all the time from the internet apps. The real time notifications come intermittently or when I connect to 3G, they come instantly.

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • IPad WiFi Connection Problems - WiFi Symbol Appears With Full Bars but I Don't Get A Checkmark?

    I was using the iPad one day and then all of a sudden it stopped connecting to the internet. The network at this hotel is very good and I've asked them about their router so it is not the router's problem.
    I go to the Settings and tap on Wi-Fi then I tap on the hotel network. After a few seconds, it says the network name beside the Wi-Fi tab and it gives me the WiFi symbol showing 3 bars. But then I never get the checkmark or tick saying everything is connected. I try going online and it says the iPad is not connected to the internet. I've tried an iPhone and it connected and got a checkmark in a few seconds. I've talked to the front desk and he took out his phone and showed me that he could connect, he even opened a page without any problems at all.
    I've been trying to find a solution for this for a long time. I've been searching Google over and over again. I turned Airplane Mode on for 1 minute, I've tried Resetting my Network settings, I've tried forgetting the network and reconnecting again, I've tried removing all restrictions from the iPad, I've rebooted the iPad A LOT, etc.
    So this is my problem for people who don't want to read the whole message:
    1. I can't connect to the internet with the iPad
    2. It shows the WiFi symbol saying its connected but I never get the checkmark or tick.
    3. It's not the router problem.
    4. I've tried other networks and it doesn't work. It just keeps on showing that loading circle right beside the network name.
    5. Do any of you know what this problem is? Or do you have a solution?
    Thank you for reading this and have a great day

    Since you are in a hotel, some of these are not applicable.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • 2504 controller + 2602 APs = wireless clients connectivity problems

    Hello, everybody!
    I have a connectivity problems of wireless clients. The symptoms are:
    1) Some clients receive 169.254.x.x., instead a correct DHCP addresses, less in a minute connection drops, and in controller's "Monitor" > "Clients" tab these clients are marked as "Excluded".
    2) Most of the clients receive the correct addresses from DHCP (192.168.2.x), but also loose connection soon.
    3) Wireless clients with correct addresses can't ping each other, gateway and an address of the controller's dynamic interface (all of them are in same subnet).
    4) And the most suspicious problem is that some machines are unable to connect to APs after several attemps to do that. I mean, I configure controller and change some options, trying to understand, whether they were applied or not and constantly connect and disconnet certain PC to the SSID. After five or ten attempts I can't connect to the SSID. During these attempts, the others PCs stay connected, without interruptions, and they could be reconnected again. It's like some kind of port security works, but I'm not sure...
    Do you have any ideas which options should I configure?
    My configuration:
    I have three interfaces on the controller: virtual, management (default) and dynamic (it is set to the WLAN)
    I have one SSID, WPA/WPA2, AES/TKIP, authentication PSK.
    My clients are a/b/g/n, all are permitted on the controller. No custom security policies were applied.
    All the devices are in a single room: controller, one AP and different clients: desktop, notebooks, iPad, Nokia Lumia, etc.
    I have an internal DHCP Server on the controller and it works perfectly well.
    I can provide all the screenshots required from web-interface of the controller...
    Many thanks in advance for all ideas that you have about these problems...

    Hi, there!
    The problem was solved.
    1) APIPA address receives only single machine with Win8 - I think there are some firewall issues
    2) Other devices have been loosing connection because they were mobile devices, like iPad and Lumia. If you keep working with it, it doesn't drop the connection
    3) The dynamic interface address and gateway address were inaccessible because i had not used an appropriate port on the controller. =)))) Firstly, it was just a guess, but it proved.
    Now, everything works with WPA2, AES, PSK...
    It is a very good day!)
    The only question remains: why I can't connect machines, which have a static IP? During the controller initialization, I said "yes" for permitting static IPs...
    Guys, many thanks for your help!

  • TS1398 Connection problems with iPad 2

    I have an iPad 2. It connected with my wi-fi network for weeks without a problem but now will not connect at all. It always comes up with "unable to connect with "name of router/Wi-Fi""
    The iPad connects well with other networks and my friends ipad connects well with my network, so the network is not a problem. It is just my iPad2 with my network. I have reset the router and the iPad. I have tried everything I can think of. Re-entered the network with checked settings (that work on my friends iPad 3) Updated all the softwear as neccessary Any help would be gratefully appreciated as even going in to our local Apple dealer did not get me anywhere, they connected instantly with their network.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Anybody can help me about WPA Connection?

    Hi Everyone,I've one lenovo G550 notebook and i use Pardus via OS(for informatin visit:www.pardus.org.tr) but i have a problem with wpa connections.I'm connect and getting ip but I'm not connect to internet.
    I give you some output on terminal.I hope you will help me.
    ifconfig -a
    eth0 Link encap:Ethernet HWaddr 00:26:22:D7:EC:6F
    UP BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    Interrupt:17
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:40 errors:0 dropped:0 overruns:0 frame:0
    TX packets:40 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:2400 (2.3 Kb) TX bytes:2400 (2.3 Kb)
    pan0 Link encap:Ethernet HWaddr 1A:7C:20:D6:A0:2C
    BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    wlan0 Link encap:Ethernet HWaddr 00:1E:65:F7:A9:2E
    UP BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    wmaster0 Link encap:UNSPEC HWaddr 00-1E-65-F7-A9-2E-00-00-00-00-00-00-00-00-00-00
    UP RUNNING MTU:0 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    lspci
    00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
    00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
    00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
    00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
    00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
    00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
    00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
    00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
    00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
    00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03)
    01:00.0 VGA compatible controller: nVidia Corporation Device 0a74 (rev a2)
    01:00.1 Audio device: nVidia Corporation Device 0be3 (rev a1)
    04:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
    07:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
    ifconfig
    eth0 Link encap:Ethernet HWaddr 00:26:22:D7:EC:6F
    UP BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    Interrupt:17
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:32 errors:0 dropped:0 overruns:0 frame:0
    TX packets:32 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:1920 (1.8 Kb) TX bytes:1920 (1.8 Kb)
    wlan0 Link encap:Ethernet HWaddr 00:1E:65:F7:A9:2E
    inet addr:172.30.2.175 Bcast:172.30.3.255 Mask:255.255.255.255
    inet6 addr: fe80::21e:65ff:fef7:a92e/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:3913 errors:0 dropped:0 overruns:0 frame:0
    TX packets:61 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:736587 (719.3 Kb) TX bytes:13156 (12.8 Kb)
    wmaster0 Link encap:UNSPEC HWaddr 00-1E-65-F7-A9-2E-39-32-00-00-00-00-00-00-00-00
    UP RUNNING MTU:0 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

    there are security levels for wpa connection. such as low- normal - high ( 64 bit -128 bit -256 bit )
    if you select 64 bit secure method, you need to enter 8 characters for password. if you enter 7 and save and exit, some computers can connect but some not. make sure you have 8- 16- 32 characters and entered correctly.
    to check if it's password issue, disable the secure connection and try again. if it doesn't work, we can try some other solutions.

  • Ipad connection problems

    Why do I have problems with the ipad. Connects fine all day then suddenly nothing - registers wifi name but when you try and call up a web page it says it is not connected. When I disconnect the cable between my PC and the hub (2.0) it works - why? anyone have any ideas?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • WLC 2504 Connectivity Problems

    This is a tricky one.
    I installed a 2504 WLC with three AP's. Two SSID’s were configured, one with WPA2/AES-TIKIP and the other with Web Auth.
    After installation, customers could connect to WLAN without problem and .
    The problem that is occurring is that since the beginning of week, customers PDA's, cell phones and iPad and cannot access Internet with any of the two WLAN but clients who used laptop have no connection problems. Also the DHCP Server is assigning IP's correctly.
    This problem also occurs with test SSID I created which is Open Auth. I see associated Cell phones and IPAD to the WLC but none of these answers ping from the WLC.
    This is a WLC 2504 with IOS 7.4.100.

    Hello everyone!
    Today I did a test with my Cell phone Samsung Note 2 and I have the same conectivity problem.
    I have installed the APK ipconfig from the Play Store for Android in my cell phone and y see that I getting IP Address, Mask and Gateway.
    This is what I´ve got from the APK:
    IP ADDRESS 192.168.8.181
    MASK: 255.255.255.0
    GATEWAY: 192.168.8.2
    DHCP SERVER: 192.168.8.16
    DNS1: 192.168.6.16
    DNS2: 192.168.2.16
    I have connected my laptop to the WLAN with no issue and I´m getting this:
    The IP address of the DHCP Server is 192.168.8.16 and 192.168.6.16 and is a Microsoft Server.
    I´ve created a test WLAN with OPEN AUTH but the problem remains.
    Here is the OUTPUT you requested:
    show wlan 1
    WLAN Identifier.................................. 1
    Profile Name..................................... APS-PT-01
    Network Name (SSID).............................. APS-PT-01
    Status........................................... Enabled
    MAC Filtering.................................... Disabled
    Broadcast SSID................................... Enabled
    AAA Policy Override.............................. Disabled
    Network Admission Control
      Client Profiling Status ....................... Disabled
       DHCP ......................................... Disabled
       HTTP ......................................... Disabled
      Radius-NAC State............................... Disabled
      SNMP-NAC State................................. Disabled
      Quarantine VLAN................................ 0
    Maximum number of Associated Clients............. 0
    Maximum number of Clients per AP Radio........... 200
    Number of Active Clients......................... 16
    Exclusionlist Timeout............................ 60 seconds
    Session Timeout.................................. 1800 seconds
    User Idle Timeout................................ 300 seconds
    User Idle Threshold.............................. 0 Bytes
    NAS-identifier................................... APS-Admin-WLC-01
    CHD per WLAN..................................... Enabled
    Webauth DHCP exclusion........................... Disabled
    Interface........................................ management
    Multicast Interface.............................. Not Configured
    WLAN IPv4 ACL.................................... unconfigured
    WLAN IPv6 ACL.................................... unconfigured
    mDNS Status...................................... Enabled
    mDNS Profile Name................................ default-mdns-profile
    DHCP Server...................................... Default
    DHCP Address Assignment Required................. Disabled
    Static IP client tunneling....................... Disabled
    Quality of Service............................... Silver
    Per-SSID Rate Limits............................. Upstream          Downstream
    Average Data Rate................................   0                      0
    Average Realtime Data Rate.......................   0                      0
    Burst Data Rate..................................   0                      0
    Burst Realtime Data Rate.........................   0                      0
    Per-Client Rate Limits........................... Upstream          Downstream
    Average Data Rate................................   0                      0
    Average Realtime Data Rate.......................   0                      0
    Burst Data Rate..................................   0                      0
    Burst Realtime Data Rate.........................   0                      0
    Scan Defer Priority.............................. 4,5,6
    Scan Defer Time.................................. 100 milliseconds
    WMM.............................................. Allowed
    WMM UAPSD Compliant Client Support............... Disabled
    Media Stream Multicast-direct.................... Disabled
    CCX - AironetIe Support.......................... Enabled
    CCX - Gratuitous ProbeResponse (GPR)............. Disabled
    CCX - Diagnostics Channel Capability............. Disabled
    Dot11-Phone Mode (7920).......................... Disabled
    Wired Protocol................................... None
    Passive Client Feature........................... Disabled
    Peer-to-Peer Blocking Action..................... Disabled
    Radio Policy..................................... All
    DTIM period for 802.11a radio.................... 1
    DTIM period for 802.11b radio.................... 1
    Radius Servers
       Authentication................................ Global Servers
       Accounting.................................... Global Servers
          Interim Update............................. Disabled
       Dynamic Interface............................. Disabled
       Dynamic Interface Priority.................... wlan
    Local EAP Authentication......................... Disabled
    Security
       802.11 Authentication:........................ Open System
       FT Support.................................... Disabled
       Static WEP Keys............................... Disabled
       802.1X........................................ Disabled
       Wi-Fi Protected Access (WPA/WPA2)............. Enabled
          WPA (SSN IE)............................... Enabled
             TKIP Cipher............................. Enabled
             AES Cipher.............................. Enabled
          WPA2 (RSN IE).............................. Enabled
             TKIP Cipher............................. Enabled
             AES Cipher.............................. Enabled
          Auth Key Management
             802.1x.................................. Disabled
             PSK..................................... Enabled
             CCKM.................................... Disabled
             FT-1X(802.11r).......................... Disabled
             FT-PSK(802.11r)......................... Disabled
             PMF-1X(802.11w)......................... Disabled
             PMF-PSK(802.11w)........................ Disabled
          FT Reassociation Timeout................... 20
          FT Over-The-DS mode........................ Enabled
          GTK Randomization.......................... Disabled
          SKC Cache Support.......................... Disabled
          CCKM TSF Tolerance......................... 1000
       WAPI.......................................... Disabled
       Wi-Fi Direct policy configured................ Disabled
       EAP-Passthrough............................... Disabled
       CKIP ......................................... Disabled
       Web Based Authentication...................... Disabled
       Web-Passthrough............................... Disabled
       Conditional Web Redirect...................... Disabled
       Splash-Page Web Redirect...................... Disabled
       Auto Anchor................................... Disabled
       FlexConnect Local Switching................... Disabled
       flexconnect Central Dhcp Flag................. Disabled
       flexconnect nat-pat Flag...................... Disabled
       flexconnect Dns Override Flag................. Disabled
       FlexConnect Vlan based Central Switching ..... Disabled
       FlexConnect Local Authentication.............. Disabled
       FlexConnect Learn IP Address.................. Enabled
       Client MFP.................................... Optional
       PMF........................................... Disabled
       PMF Association Comeback Time................. 1
       PMF SA Query RetryTimeout..................... 200
       Tkip MIC Countermeasure Hold-down Timer....... 60
    AVC Visibilty.................................... Disabled
    AVC Profile Name................................. None
    Flow Monitor Name................................ None
    Call Snooping.................................... Disabled
    Roamed Call Re-Anchor Policy..................... Disabled
    SIP CAC Fail Send-486-Busy Policy................ Enabled
    SIP CAC Fail Send Dis-Association Policy......... Disabled
    KTS based CAC Policy............................. Disabled
    Assisted Roaming Prediction Optimization......... Disabled
    802.11k Neighbor List............................ Disabled
    802.11k Neighbor List Dual Band.................. Disabled
    Band Select...................................... Disabled
    Load Balancing................................... Disabled
    Multicast Buffer................................. Disabled
    Mobility Anchor List
    WLAN ID     IP Address            Status
    802.11u........................................ Disabled
    MSAP Services.................................. Disabled
    (Cisco Controller) >
    (Cisco Controller) >
    (Cisco Controller) >show w?
    wgb            wlan           wps           
    (Cisco Controller) >show wlan 2
    WLAN Identifier.................................. 2
    Profile Name..................................... APS-Visitas-PT
    Network Name (SSID).............................. APS-Visitas-PT
    Status........................................... Enabled
    MAC Filtering.................................... Disabled
    Broadcast SSID................................... Enabled
    AAA Policy Override.............................. Disabled
    Network Admission Control
      Client Profiling Status ....................... Disabled
       DHCP ......................................... Disabled
       HTTP ......................................... Disabled
      Radius-NAC State............................... Disabled
      SNMP-NAC State................................. Disabled
      Quarantine VLAN................................ 0
    Maximum number of Associated Clients............. 0
    Maximum number of Clients per AP Radio........... 200
    Number of Active Clients......................... 1
    Exclusionlist Timeout............................ 60 seconds
    Session Timeout.................................. 1800 seconds
    User Idle Timeout................................ 300 seconds
    User Idle Threshold.............................. 0 Bytes
    NAS-identifier................................... APS-Admin-WLC-01
    CHD per WLAN..................................... Enabled
    Webauth DHCP exclusion........................... Disabled
    Interface........................................ management
    Multicast Interface.............................. Not Configured
    WLAN IPv4 ACL.................................... unconfigured
    WLAN IPv6 ACL.................................... unconfigured
    mDNS Status...................................... Enabled
    mDNS Profile Name................................ default-mdns-profile
    DHCP Server...................................... Default
    DHCP Address Assignment Required................. Disabled
    Static IP client tunneling....................... Disabled
    Quality of Service............................... Silver
    Per-SSID Rate Limits............................. Upstream          Downstream
    Average Data Rate................................   0                      0
    Average Realtime Data Rate.......................   0                      0
    Burst Data Rate..................................   0                      0
    Burst Realtime Data Rate.........................   0                      0
    Per-Client Rate Limits........................... Upstream          Downstream
    Average Data Rate................................   0                      0
    Average Realtime Data Rate.......................   0                      0
    Burst Data Rate..................................   0                      0
    Burst Realtime Data Rate.........................   0                      0
    Scan Defer Priority.............................. 4,5,6
    Scan Defer Time.................................. 100 milliseconds
    WMM.............................................. Allowed
    WMM UAPSD Compliant Client Support............... Disabled
    Media Stream Multicast-direct.................... Disabled
    CCX - AironetIe Support.......................... Enabled
    CCX - Gratuitous ProbeResponse (GPR)............. Disabled
    CCX - Diagnostics Channel Capability............. Disabled
    Dot11-Phone Mode (7920).......................... Disabled
    Wired Protocol................................... None
    Passive Client Feature........................... Disabled
    Peer-to-Peer Blocking Action..................... Disabled
    Radio Policy..................................... All
    DTIM period for 802.11a radio.................... 1
    DTIM period for 802.11b radio.................... 1
    Radius Servers
       Authentication................................ Global Servers
       Accounting.................................... Global Servers
          Interim Update............................. Disabled
       Dynamic Interface............................. Disabled
       Dynamic Interface Priority.................... wlan
    Local EAP Authentication......................... Disabled
    Security
       802.11 Authentication:........................ Open System
       FT Support.................................... Disabled
       Static WEP Keys............................... Disabled
       802.1X........................................ Disabled
       Wi-Fi Protected Access (WPA/WPA2)............. Disabled
       WAPI.......................................... Disabled
       Wi-Fi Direct policy configured................ Disabled
       EAP-Passthrough............................... Disabled
       CKIP ......................................... Disabled
       Web Based Authentication...................... Enabled
    IPv4 ACL........................................ Unconfigured
    IPv6 ACL........................................ Unconfigured
    Web-Auth Flex ACL............................... Unconfigured
    Web Authentication server precedence:
    1............................................... local
    2............................................... radius
    3............................................... ldap
       Web-Passthrough............................... Disabled
       Conditional Web Redirect...................... Disabled
       Splash-Page Web Redirect...................... Disabled
       Auto Anchor................................... Disabled
       FlexConnect Local Switching................... Disabled
       flexconnect Central Dhcp Flag................. Disabled
       flexconnect nat-pat Flag...................... Disabled
       flexconnect Dns Override Flag................. Disabled
       FlexConnect Vlan based Central Switching ..... Disabled
       FlexConnect Local Authentication.............. Disabled
       FlexConnect Learn IP Address.................. Enabled
       Client MFP.................................... Optional but inactive (WPA2 not configured)
       PMF........................................... Disabled
       PMF Association Comeback Time................. 1
       PMF SA Query RetryTimeout..................... 200
       Tkip MIC Countermeasure Hold-down Timer....... 60
    AVC Visibilty.................................... Disabled
    AVC Profile Name................................. None
    Flow Monitor Name................................ None
    Call Snooping.................................... Disabled
    Roamed Call Re-Anchor Policy..................... Disabled
    SIP CAC Fail Send-486-Busy Policy................ Disabled
    SIP CAC Fail Send Dis-Association Policy......... Disabled
    KTS based CAC Policy............................. Disabled
    Assisted Roaming Prediction Optimization......... Disabled
    802.11k Neighbor List............................ Disabled
    802.11k Neighbor List Dual Band.................. Disabled
    Band Select...................................... Disabled
    Load Balancing................................... Disabled
    Multicast Buffer................................. Disabled
    Mobility Anchor List
    WLAN ID     IP Address            Status
    802.11u........................................ Disabled
    MSAP Services.................................. Disabled
    (Cisco Controller) >
    (Cisco Controller) >show wlan 3
    WLAN Identifier.................................. 3
    Profile Name..................................... Prueba
    Network Name (SSID).............................. Prueba
    Status........................................... Enabled
    MAC Filtering.................................... Disabled
    Broadcast SSID................................... Enabled
    AAA Policy Override.............................. Disabled
    Network Admission Control
      Client Profiling Status ....................... Disabled
       DHCP ......................................... Disabled
       HTTP ......................................... Disabled
      Radius-NAC State............................... Disabled
      SNMP-NAC State................................. Disabled
      Quarantine VLAN................................ 0
    Maximum number of Associated Clients............. 0
    Maximum number of Clients per AP Radio........... 200
    Number of Active Clients......................... 0
    Exclusionlist Timeout............................ 60 seconds
    Session Timeout.................................. 1800 seconds
    User Idle Timeout................................ 300 seconds
    User Idle Threshold.............................. 0 Bytes
    NAS-identifier................................... APS-Admin-WLC-01
    CHD per WLAN..................................... Enabled
    Webauth DHCP exclusion........................... Disabled
    Interface........................................ management
    Multicast Interface.............................. Not Configured
    WLAN IPv4 ACL.................................... unconfigured
    WLAN IPv6 ACL.................................... unconfigured
    mDNS Status...................................... Enabled
    mDNS Profile Name................................ default-mdns-profile
    DHCP Server...................................... Default
    DHCP Address Assignment Required................. Disabled
    Static IP client tunneling....................... Disabled
    Quality of Service............................... Silver
    Per-SSID Rate Limits............................. Upstream          Downstream
    Average Data Rate................................   0                      0
    Average Realtime Data Rate.......................   0                      0
    Burst Data Rate..................................   0                      0
    Burst Realtime Data Rate.........................   0                      0
    Per-Client Rate Limits........................... Upstream          Downstream
    Average Data Rate................................   0                      0
    Average Realtime Data Rate.......................   0                      0
    Burst Data Rate..................................   0                      0
    Burst Realtime Data Rate.........................   0                      0
    Scan Defer Priority.............................. 4,5,6
    Scan Defer Time.................................. 100 milliseconds
    WMM.............................................. Allowed
    WMM UAPSD Compliant Client Support............... Enabled
    Media Stream Multicast-direct.................... Disabled
    CCX - AironetIe Support.......................... Disabled
    CCX - Gratuitous ProbeResponse (GPR)............. Disabled
    CCX - Diagnostics Channel Capability............. Disabled
    Dot11-Phone Mode (7920).......................... Disabled
    Wired Protocol................................... None
    Passive Client Feature........................... Disabled
    Peer-to-Peer Blocking Action..................... Disabled
    Radio Policy..................................... All
    DTIM period for 802.11a radio.................... 1
    DTIM period for 802.11b radio.................... 1
    Radius Servers
       Authentication................................ Global Servers
       Accounting.................................... Global Servers
          Interim Update............................. Disabled
       Dynamic Interface............................. Disabled
       Dynamic Interface Priority.................... wlan
    Local EAP Authentication......................... Disabled
    Security
       802.11 Authentication:........................ Open System
       FT Support.................................... Enabled
       Static WEP Keys............................... Disabled
       802.1X........................................ Disabled
       Wi-Fi Protected Access (WPA/WPA2)............. Disabled
       WAPI.......................................... Disabled
       Wi-Fi Direct policy configured................ Disabled
       EAP-Passthrough............................... Disabled
       CKIP ......................................... Disabled
       Web Based Authentication...................... Disabled
       Web-Passthrough............................... Disabled
       Conditional Web Redirect...................... Disabled
       Splash-Page Web Redirect...................... Disabled
       Auto Anchor................................... Disabled
       FlexConnect Local Switching................... Disabled
       flexconnect Central Dhcp Flag................. Disabled
       flexconnect nat-pat Flag...................... Disabled
       flexconnect Dns Override Flag................. Disabled
       FlexConnect Vlan based Central Switching ..... Disabled
       FlexConnect Local Authentication.............. Disabled
       FlexConnect Learn IP Address.................. Enabled
       Client MFP.................................... Disabled
       PMF........................................... Disabled
       PMF Association Comeback Time................. 1
       PMF SA Query RetryTimeout..................... 200
       Tkip MIC Countermeasure Hold-down Timer....... 60
    AVC Visibilty.................................... Disabled
    AVC Profile Name................................. None
    Flow Monitor Name................................ None
    Call Snooping.................................... Disabled
    Roamed Call Re-Anchor Policy..................... Disabled
    SIP CAC Fail Send-486-Busy Policy................ Disabled
    SIP CAC Fail Send Dis-Association Policy......... Disabled
    KTS based CAC Policy............................. Disabled
    Assisted Roaming Prediction Optimization......... Disabled
    802.11k Neighbor List............................ Disabled
    802.11k Neighbor List Dual Band.................. Disabled
    Band Select...................................... Disabled
    Load Balancing................................... Disabled
    Multicast Buffer................................. Disabled
    Mobility Anchor List
    WLAN ID     IP Address            Status
    802.11u........................................ Disabled
    MSAP Services.................................. Disabled

  • TS1398 Connectivity problem in Ipad

    Hi Friends,
    When Am connecting my Ipad to wifi, entire connection is lost, ie all those who have connected through that particular router is loosing the connectivity..everytime I have to restart the router after 3-4 times , connection will be stable for some time. This problem persist everytime I switch on my Ipad (Same happens when my friend also switch on his Ipad). Please do help to fix this issue.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • IPad 4th Gen, 802.11n connection problems

    Hi,
    I am having some problems in staying connected to a dual band wireless N (home, private). I am not having any problem with the G one, so first I would ask if is this happening to anyone..then: do you think it is an hardware problem?
    Here below my N lan:
    iOs is the latest version 6.0.1..a demo video on youtube soon..
    Thanks in advance for your support.
    Fabio

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Persistent Airport connection problems

    I've been having persistent airport connection problems since upgrading to Leopard. It got so bad that I finally installed an Ethernet network in my office. However, I really want to be able to use my laptop in other rooms so I want to fix this problem if possible.
    Here's what happens. When I turn Airport on, and then select my network, I am prompted to enter my password (even though it's in the keychain). When I click "OK", I get a "connection timeout" error and no connection is made. This happens on both my MacBook and my Mac Pro.
    I am currently using a D-Link ethernet/wireless router, but the problem also occurs with an Airport Express which I used previously and still have. I am using mixed 802.11n and 802.11g with WPA personal security and "WPA only" mode.
    One note: if I disable any kind of network security, I can easily connect to the network. So it seems to have something to do with the security setting.

    Can you reconfigure your router to use WPA2? Some people have found satisfaction after switching to the security model: http://discussions.apple.com/message.jspa?messageID=7336628#7336628

  • New Mac Owner, connection problems...

    Hi,
    This past month I bought a new Macbook Pro (The 2.5ghz 15" one.) and a iMac (The 20" 2ghz one.) Lately I've been getting connection problems where the connection just randomly drops every 3-10 minutes.
    The router is 2 rooms away from the MBP and its in the same room as the iMac. I've only known of one connection problem with the iMac. The MBP drops constantly.
    My router is a Linksys WRT54GX2 v2 with the latest firmware. (1.00.08)
    Before I had the Mac's I had a Sony Vaio FS920, and it would never drop a connection.
    What I've tried so far:
    _On the router:_
    *Wireless > Advanced Wireless Settings:*
    Basic Rate Set #2
    Transmission Rate Auto
    CTS Protection Mode Disabled
    Auto Channel Selection Auto
    Beacon Interval 50
    DTIM Interval 2
    Fragmentation Threshold: 2306
    RTS Threshold: 2307
    Preamble Type: Long
    Network Density: Low
    Compression: Disable
    Concatenation Auto
    *Wireless > Wireless Security:*
    Security Mode: WPA/WPA2 Personal
    WPA Personal: Enable
    WPA 2 Personal: Enable
    Encryption Algorithms: TKIP+AES
    *Wireless > Basic Wireless:*
    Wireless Network Mode: MIXED
    Wireless Channel: 6 - 2.437Ghz
    Adaptive Channel Expansion: 2 - 2.417Ghz
    _On the MBP:_
    Airport is on the top of the connection lists
    The SSID is on the top of the conenction list
    Did the CommandOption+RP twice on reboot for PRAM.
    Can anyone help me out? It seems the only thing that is letting me back online every day is the fact that I have to reset the router and the cable modem... There has to be a easier way?
    Thanks,
    nG.
    Message was edited by: Hajimari

    I believe the problem you are having with dropped connections is a known issue with Leopard. From what I have read, Apple will be issuing a fix with the 10.5.3 release. Of course, since Apple doesn't publicly discuss future updates, we'll just have to see if this does get fixed.
    Keith

Maybe you are looking for

  • Creative Cloud is Blank, nothing is displayed even after a reboot, what is the solution?

    I did the following but it did not help, Rename the opm.db file. 1.Close the Creative Cloud application if it's running. 2.Navigate to the OOBE folder. Windows: [System drive]:\Users\[username]\AppData\Local\Adobe\OOBE Mac OS: /User/<username>/Librar

  • XMII version dependency

    Hi Gurus,                    I have some confusion regarding xMII - SAP connectivity. If xMII is version dependent? e.g if xMII v12. can be accessible through a particular version of SAP(say 6.4). Do we need any special connectivity(connectors, BADI

  • Changing user who calls Enterprise Service dynamically

    Hello all, I'd like to call Enterprise Service as Portal logon user. As you know Enterprise Service is implemented on ECC, it always requires ECC's user/password when I access it. Off the top of my head I may use logon ticket, but it does not work we

  • How to use MultiLookAndFeel?

    In main function I use the previous three of following method setLookAndFeel and OK,but the last one failed,why and how can I use MultiLookAndFeel to get optional interfaces at Runtime. UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName

  • User exit for MIGO - Change on Posting A/C Code Upon Saving.

    Hi, I have a requirement to to split the GR/IR clearing account during the posting of goods receipt in MIGO by filled in BSEG-HKONT with specify a/c code (hard coded). I'm not able to find any user exit to change the value in BSEG-HKONT while click o