WPA enterprise airprint printers

Does anyone know of any airprint printers that support WPA enterprise authentication?

Try the HP LaserJet Pro 300 color MFP M375, 400 , 500 , 600.
Call HP first to make sure.

Similar Messages

LaserJet CP1525nw & WPA-enterprise

We bought a LaserJet CP1525nw printer because of its airprint support for printing from our iPads. Our wireless network uses WPA-enterprise security.
We are unable to connect the printer to the wireless due to the enterprise authentication. ipad is unable to find the printer.
We need printing from the iPads, ePrint does not offer. Any help would be much appreciated. Firmware 20110329.

Hello,
If you have not already, I might recommend going here and then looking at the link for iPad printing for ePrint/Airprint or ePrint Home and Biz. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02784317&tmp_task=useCategory&cc=us&dlc=en&lang...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

How can I print to my HP OfficeJet 6500 Wireless Printer from my iPhone 4S which used to work before AirPrint printers were even available? (running Mac Lion OS, all software and HP sw updates are all performed)

How can I print to my HP OfficeJet 6500 Wireless Printer from my iPhone 4S which used to work (on prior iPhones) before AirPrint printers were even available? (running Mac Lion OS, all software and HP sw updates are all performed)
I don't get it, I read one post about why would we have to buy an AirPrint Printer when we have used the "print to a wifi printer" just fine in the past? Yes I feel that's exactly what's happening to me now too. I want to print from my iPhone and iPad to my WiFi Printer which is also now connected to my Airport Express WiFi network just fine. No problems.

Very glad you added that bit of information because I see different problems similar to this. I want to share with them what you did and hopefully you not only fixed your specific problem but you can lend some more advice to others with problems like this. Thanks!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

My iPhone 6 iOS 8.2 does not print on HP Color LaserJet Pro MFP M476nw. It displays "No AirPrint Printers Found'.

My iPhone 6 iOS 8.2 does not print on HP Color LaserJet Pro MFP M476nw.
It displays "No AirPrint Printers Found."
Same thing for iPhone 5S iOS 8.2.
Both iPhone and printer on the same wifi network.
I tried printing from different applications. AirPrint does not work.
I tried turning off and back on, reset, printing from different applications, ...
iPhone 6 prints through HP Wireless Direct printing.
Sony laptop works via wifi.

Hi mtotonji,
Thank you for using the Apple Support Community. Given the nature of the issues you are describing and your current configuration, you may be better served by reaching out to one of Apple's other available resources for more direct assistance - https://getsupport.apple.com/GetproductgroupList.action
Sincerely,
- Brenden

Does WET200 support WPA-Enterprise/TKIP?

I could not connect a WET200 (newly bought) to our WPA-enterprise/TKIP wireless network.
Can anyone tell me what was wrong? Does WET200 support WPA-enterprise? Please help!
Thanks a lot.

B**r!!!
oh well, one can only hope that there'll be an upgrade real soon now
Alex

Extend WPA Enterprise

Does anyone know if there is any way I can connect my Time Capsule to my University wireless network?
I live right opposite my university and if I put my laptop on my window sill I can connect to the wireless, but can't connect from my desk... I was wanting to put my time capsule on my window sill, use that to connect to the Uni wireless and thus extend the connection into my room...
Does anyone know a way to achieve this? My Uni uses WPA Enterprise encryption...
Many thanks.
Andrew.

One possible option, with your existing equipment, would be to reconfigure your Mac as a "software" router by employing OS X's Internet Sharing feature. In this case you would be sharing the Mac's wireless Internet connection through its Ethernet port. Theoretically, you could then connect the TC to the Mac's Ethernet port; reconfigure the TC as a bridge, and then connect clients to the TC.
Personally I haven't tried this to verify that it would work. Mainly because using a Mac as a software router is extremely limited as far as features that this would provide.

Remembering WPA Enterprise Network

At my university, the wireless network is a WPA enterprise network. Each time I want to connect, I have to enter everything in manually. How do I get it to remember the network?

Thank you both for your replies. I am trying iphitus ideia but am having trouble and the wiki doesn't have much info (not related to this issue at least).
ifconfig -a related to the wireless interface:
eth1 Link encap:Ethernet HWaddr 00:19:D2:1A:56:35
inet6 addr: fe80::219:d2ff:fe1a:5635/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:12 dropped:1347 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:38366 (37.4 Kb) TX bytes:3727 (3.6 Kb)
Interrupt:16 Base address:0x4000 Memory:d8000000-d8000fff
lsmod | grep ipw:
ipw3945 200484 0
ieee80211 30664 1 ipw3945
sudo /usr/bin/netcfg-auto-wireless eth1
:: Scanning for networks [DONE]
:: eduroam up - Configuration generation failed: ctrl_interface=/var/run/wpa_supplicant [BUSY]
ctrl_interface_group=0
Passphrase must be 8..63 characters
sudo netcfg2 eduroam
:: eduroam up - Configuration generation failed: ctrl_interface=/var/run/wpa_supplicant [BUSY]
ctrl_interface_group=0
Passphrase must be 8..63 characters
eduroam profile in /etc/network.d/:
CONNECTION="wireless"
INTERFACE=eth1
SCAN="yes"
SECURITY="wpa"
ESSID="eduroam"
KEY=<censored>
IP="dhcp"
TIMEOUT=30
I don't think this information in the profile is enough, doesn't say which WPA protocol uses, nor the user (in the WPA Enterprise case) so I believe the problem might be related to that lack of info in the profile. The wiki didn't have an example for WPA enterprise though
EDIT: Also my wpa_supplicant.conf is like the one on my first post with these aditional lines:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
Last edited by Grimn (2008-03-03 09:51:53)

WPA Enterprise won't authenticate

I just upgraded my MacBook from Tiger to Leopard (latest upgrades installed). However now I can no longer access the wireless network at work. Each time I try the authentication fails. I should mention that when I had Tiger and connected it always gave me a warning about the certificate which I just clicked away and everything worked fine. With Leopard I don't get that warning, and don't get a connection. Nothing else has changed, and I can't remember the certificate message I got in Tiger.
Any ideas?

Don't know the answer to your question I'm afraid but what's the difference between WPA enterprise and WPA personal, and would I gain anything by using enterprise at home?

Wpa enterprise help

I have a MacBook, that is running leopard. I am having trouble connecting to my schools wpa enterprise wireless. I am regestered to access the wireless, but am having trouble connecting. I think my problem is that i dont know how to tell the computer which domain on the wireless network. The connection i am trying to get has many domains.

Ok, sorry for the super delayed response but I didn't have access to my laptop, then I was busy with midterms. I successfully connected manually with wpa_supplicant with this config file:
[phil@pwned network.d]$ cat /etc/wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
eapol_version=1
ap_scan=1
fast_reauth=1
network={
ssid="uw-secure"
scan_ssid=1
key_mgmt=WPA-EAP
eap=PEAP
identity="rofl"
password="lolol"
phase1="peaplabel=0"
I then updated my uw-secure file so that it referenced the new wpa config file:
[phil@pwned network.d]$ cat uw-secure
CONNECTION="wireless"
DESCRIPTION="secure uw"
INTERFACE="wlan0"
IP="dhcp"
SECURITY="wpa-config"
SCAN="YES"
WPA_CONF="/etc/wpa_supplicant.conf"
I then tried to connect with netcfg, and I got this:
[phil@pwned network.d]$ sudo netcfg uw-secure
:: uw-secure up
wlan0 Interface doesn't support scanning : Device or resource busy
wlan0 Interface doesn't support scanning : Network is down
wlan0 Interface doesn't support scanning : Network is down
wlan0 Interface doesn't support scanning : Network is down
wlan0 Interface doesn't support scanning : Network is down
- Network not present.
any help would be appreciated.

WPA Enterprise Connectivity

Hi - I'm currently in Baton Rouge, LA and attend school at LSU. Our wireless network, lsusecure, is WPA Enterprise, which is supposed to be compatible with iPhone 2.0. The problem is, I can't seem to connect to the network. I enter my LSU username and password, which works for connecting on a computer, and it consistently says "connecting to lsusecure" but nothing ever happens. I was just wondering if I will have to enter in more information about the network rather than just using my regular login information. If anyone could help, I would greatly appreciate it, as Tech Services at LSU currently has no information on how to connect.

Guidedbyvoip, sorry your IT Dept is no help.
But, here at LSU, we are here to help! Hope these directions can work for you as well, instead of needing a 3rd party config util!
ccastl1, please follow the following directions to configure your iPhone to connect to our LSUSECURE wireless network.
Note: The device must be updated to firmware 2.0 in order to connect to lsusecure
1. Select "Settings"
2. Select "Wi-Fi"
3. Make sure Wi-Fi is turned on. If the device is connected to any other network other than lsusecure (it will usually connect to lsuwireless first) you must remove that network before connecting to lsusecure.
4. Select the network it is connected to by pressing on the blue arrow to the right of the name.
5. Select "Forget this Network"
6. Choose "Forget Network"
7. Select lsusecure
8. Enter your PAWS Username & Password and press "Join" at the bottom right of the keyboard.
9. Accept the certificate by pressing "Accept"
You are now connected to lsusecure!
Please contact us directly if you have any further questions or problems!
Thanks!
< Message was edited by: Host to remove email address>

Cannot switch between WPA2 and WPA Enterprise WiFi locations.

Hello Everyone,
I have two Wifi locations I use, a WPA2 and a WPA Enterprise. When I switch locations from one to the other it looks as if that the Airport express resets but does not let go of the active location. I have to manually turn airport off and then on again to have it kick in. Anyone experience this and have a work around?
Thanks in advance,
K.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

Connecting MBA to domain using WPA Enterprise

Hi guys!
I'm having "the usual" new MBA WiFi-problems, meaning my MBA keeps dropping the WiFi connection occasionally, but that's going on in another thread.
I don't know whether this is a related problem, but I can't seem to connect the MBA to the WiFi network at the office at all. The network connection dialog tells me my connection needs WPA Enterprise credentials, but no matter what I write, I won't get connected.
So I'll start with the basics. This works for every other device I have (PC laptop, iPhone, iPads and so on):
Username: \\MyDomain\MyUserName
Password: MyPassword
But not for the MBA. For the domain/username, I've tried single \´s and /´s and just about any combination just in case this is a "Mac syntax thing" (this is my first Mac laptop), with and without the MyDomain part, lowercase, uppercase, quotation marks around the password (as I saw mentioned in some thread in the case of alphanumeric WEP, or some such), but nothing works. I don't remember the exact error message, but it has to do with the authentication server perhaps not being available.
Apparently others have had problems with the WPA Enterprise connections as well, but could somebody just confirm that the \\MyDomain\MyUsename -syntax I'm using is indeed correct.
Cheers,
Kim

Marc,
I'm suprised that WPA works over WDS. I had thought that because WPA cycles the encryption key with each message transmission that the two Airport devices would quickly get out of sync.
But I do respect Alan's opinion, so I'd give in to his statement that it does work, I'll be searching through the update readme's to see when it started working.
You could always drop back to WEP encryption. Unless you have the FBI next door listening in and analysing all your network traffic, it's not going to be broken.
WPA changes the encryption key with each wireless message, WEP doesn't. So in theory, with WEP, someone could analyse all your network traffic, looking for patterns. You can work out just how hard that is.
If you choose an obvious password (like from a dictionary) it won't matter if you're on WPA instead of WEP, the Feds / hackers will be in in a short time.

10.4.2 and WPA Enterprise NOT working

Dears,
I have 2 machines configured in this way:
- 10.3.9 with Airport card (no Extreme) and latest Airport drivers;
- 10.4.2 with Airport Extreme card and latest Airport drivers;
I try to connect to our WPA Enterprise wireless network and i got 2 different results:
- 10.3.9 connects and works;
- 10.4.2 returns an error, the logs show the following:
2005-08-18 13:23:17.601 SystemUIServer[380] EAPOLControlCopyStateAndStatus failed for "en1" (err = 6)
There was an error trying to get authentication status: 6
com.apple.network.EAPOLController not active
Before upgrading to 10.4.2 the same machine with 10.4.1 was able to connect to WPA Enterprise.
I further investigated on this, seems that under 10.4.2 the folder /System/Library/SystemConfiguration/EAPOLController.bundle is empty, while under 10.4.1 it contained some files (oh yes, I have the disk image of the workstation when it had 10.4.1).
Maybe the guru guys from Apple can see if the 10.4.2 updater deleted those files in error.. bye !

Hi Rick,
I did the following:
- Re-install 10.4.2 upgrade;
- Re-install Airport 4.2 upgrade;
- Repair permissions;
- Check Keychain.
I still got those errors in the logs:
2005-08-19 16:01:07.966 Internet Connect[280] EAPOLControlCopyStateAndStatus failed for "en1" (err = 6)
There was an error trying to get authentication status: 6
com.apple.network.EAPOLController not active
2005-08-19 16:01:07.971 Internet Connect[280] EAPOLControlCopyStateAndStatus err = 6
com.apple.network.EAPOLController not active
Using Internet Connect I can see our wireless network, that is correctly identified as being encrypted with "WPA Enterprise" but after I entered user/password I got the following error:
"WPA Authentication failed. There was an error trying to get authentication status: 6"
I double checked username/password, mac address, base station configuration (Cisco AP-1131) and Radius server, are all ok (the other mac, with 10.3.9 joins our WPA network succesfully).
I'm stuck here..

Why does the WPA Enterprise Wifi Network not get displayed?

I wanted to connect to the wifi of my university via eduroam and was not able to even get the eduroam network displayed in the list of Wifi networks. I'm sure that it was there, because I tried it on several spots and my laptop was always able to find it and connect to it. Could it be that WPA Enterprise is not supported? It's quite standard already, isn't it?
There would be a second option to connect to an open network and add a VPN tunnel, but I could not find any vpn-Application for Firefox OS.
Did I oversee something or is there really no possibility to access any of my university networks?
I am using an Alcatel One Touch Fire (German language set) with current Firefox OS 1.1.0.0-prerelease

It seems to me that WPA Enterprise is not currently enabled in Firefox OS.
There are several bugs regarding this feature, among others: https://bugzilla.mozilla.org/show_bug.cgi?id=790056
Regarding VPN, there is a recent thread, which also indicates that this feature is not currently supported. See the discussion here:
https://support.mozilla.org/en-US/questions/967948
It also lists the bug-id related to this features.

WPA Enterprise Question - Convince My School to Accept Macs on Wi-Fi!

It's been a whole year since I've been able to use my MBP on my school's wifi. Currently, they are using WPA2 Personal (which I think gives you a good definition of the idiots I'm dealing with).
I've just heard about WPA Enterprise and what is allows - which is great! But one question just to convince them:
I understand every user has their own username/password for WPA Enterprise; so what security precautions can be taken in order to prevent students from sharing their username/password to those unauthorized?
If someone can answer this question - I think I'll finally be able to convine my school's IT department to allow me (and so many others) on the network. Thanks!
Message was edited by: Appleologist

It's not trivial if you aren't already familiar with the various components of public-key infrastructures and implementing them.
Here's the Wikipedia article on the subject: [Extensible Authentication Protocol|http://en.wikipedia.org/wiki/ExtensibleAuthenticationProtocol]
There's lots of information out on the net about different methods of implementing WPA2 enterprise. It takes some planning, but the gist is that you can configure an environment where you issue certificates to machines to connect to the wireless LAN, and revoke them, if necessary. A unique certificate is provided to each machine and/or user.

WPA enterprise airprint printers

Similar Messages

Maybe you are looking for