WPA Enterprise Connectivity

Hi - I'm currently in Baton Rouge, LA and attend school at LSU. Our wireless network, lsusecure, is WPA Enterprise, which is supposed to be compatible with iPhone 2.0. The problem is, I can't seem to connect to the network. I enter my LSU username and password, which works for connecting on a computer, and it consistently says "connecting to lsusecure" but nothing ever happens. I was just wondering if I will have to enter in more information about the network rather than just using my regular login information. If anyone could help, I would greatly appreciate it, as Tech Services at LSU currently has no information on how to connect.

Guidedbyvoip, sorry your IT Dept is no help.
But, here at LSU, we are here to help! Hope these directions can work for you as well, instead of needing a 3rd party config util!
ccastl1, please follow the following directions to configure your iPhone to connect to our LSUSECURE wireless network.
Note: The device must be updated to firmware 2.0 in order to connect to lsusecure
1. Select "Settings"
2. Select "Wi-Fi"
3. Make sure Wi-Fi is turned on. If the device is connected to any other network other than lsusecure (it will usually connect to lsuwireless first) you must remove that network before connecting to lsusecure.
4. Select the network it is connected to by pressing on the blue arrow to the right of the name.
5. Select "Forget this Network"
6. Choose "Forget Network"
7. Select lsusecure
8. Enter your PAWS Username & Password and press "Join" at the bottom right of the keyboard.
9. Accept the certificate by pressing "Accept"
You are now connected to lsusecure!
Please contact us directly if you have any further questions or problems!
Thanks!
< Message was edited by: Host to remove email address>

Similar Messages

  • IPad WPA Enterprise connection

    I am setting up a bunch of iPads at work and I keep getting "Unable to Join Network" when I try to login to the WPA Enterprise network. I successfully set up about 8, but for some reason I still can't get this one going. I have tried reseting the network settings, reseting the iPad to factory condition... nothing seems to work. Any help would be very much appreciated.

    Try updating the WLAN drivers and see if it helps.
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS015011
    *Non Lenovo employee*
    I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

  • Connecting MBA to domain using WPA Enterprise

    Hi guys!
    I'm having "the usual" new MBA WiFi-problems, meaning my MBA keeps dropping the WiFi connection occasionally, but that's going on in another thread.
    I don't know whether this is a related problem, but I can't seem to connect the MBA to the WiFi network at the office at all. The network connection dialog tells me my connection needs WPA Enterprise credentials, but no matter what I write, I won't get connected.
    So I'll start with the basics. This works for every other device I have (PC laptop, iPhone, iPads and so on):
    Username: \\MyDomain\MyUserName
    Password: MyPassword
    But not for the MBA. For the domain/username, I've tried single \´s and /´s and just about any combination just in case this is a "Mac syntax thing" (this is my first Mac laptop), with and without the MyDomain part, lowercase, uppercase, quotation marks around the password (as I saw mentioned in some thread in the case of alphanumeric WEP, or some such), but nothing works. I don't remember the exact error message, but it has to do with the authentication server perhaps not being available.
    Apparently others have had problems with the WPA Enterprise connections as well, but could somebody just confirm that the \\MyDomain\MyUsename -syntax I'm using is indeed correct.
    Cheers,
    Kim

    Marc,
    I'm suprised that WPA works over WDS. I had thought that because WPA cycles the encryption key with each message transmission that the two Airport devices would quickly get out of sync.
    But I do respect Alan's opinion, so I'd give in to his statement that it does work, I'll be searching through the update readme's to see when it started working.
    You could always drop back to WEP encryption. Unless you have the FBI next door listening in and analysing all your network traffic, it's not going to be broken.
    WPA changes the encryption key with each wireless message, WEP doesn't. So in theory, with WEP, someone could analyse all your network traffic, looking for patterns. You can work out just how hard that is.
    If you choose an obvious password (like from a dictionary) it won't matter if you're on WPA instead of WEP, the Feds / hackers will be in in a short time.

  • MacBook Pro 15" Not Connecting via WPA-Enterprise

    My company just added an WPA-Enterprise based wireless router, I can connect to it fine with my iPad/iPhone, I've also connected an Android device and Windows XP & Windows 7 computers to it with no issues (the Windows boxes belong to other users on the network), but I can't seem to connect my Mac to it. It asks for credentials (like a WPA-Enterprise connection should), but then it doesn't seem to hand-off the credentials properly. Since this network is in it's early life at my company (and because my MBP is an unsupported platform), I'm not getting much help from the office (don't gripe, it's the way it is). Any ideas as to why I can't connect via my MBP when it's so easy to connect via all my other platforms?

    My company just added an WPA-Enterprise based wireless router, I can connect to it fine with my iPad/iPhone, I've also connected an Android device and Windows XP & Windows 7 computers to it with no issues (the Windows boxes belong to other users on the network), but I can't seem to connect my Mac to it. It asks for credentials (like a WPA-Enterprise connection should), but then it doesn't seem to hand-off the credentials properly. Since this network is in it's early life at my company (and because my MBP is an unsupported platform), I'm not getting much help from the office (don't gripe, it's the way it is). Any ideas as to why I can't connect via my MBP when it's so easy to connect via all my other platforms?

  • 802.1X Authentication fails when connecting to WPA Enterprise using Leopard

    I'm trying to connect to an office WiFi network with my MacBook Pro which has 10.5.1 installed.
    There are instructions on how to connect using Tiger which are very simple:
    1. Enter network name
    2. Wireless Security: WPA Enterprise
    3. Enter domain credentials for username and password fields
    4. 802.1X Configuration: Automatic
    There are at least two people here using Tiger that can connect using these instructions.
    I've tried the same thing with Leopard and keep getting an error dialog stating "802.1X Authentication has failed."
    I've also tried fiddling with the 802.1X tab under "Advanced" (I know the protocol is PEAP), but no matter what I get the same error.

    Turns out I was not authorized to use the WiFi. IT got me setup and everything works now.

  • AP541N - WPA Enterprise - Failed to connect

    Hi,
    I am trying to configure an AP541N with WPA Enterprise. My RADIUS server is an MS ISA 2003 and is already working fine with other devices (I have a ASA5510 also configured to use RADIUS authentication with this server). When I try to connect, I am getting the following error message on the event log of the AP541N:
    Aug  4 18:37:36
    info
    hostapd
    wlan0: IEEE 802.11 STA 00:19:d2:9e:7a:81 deauthed from BSSID 00:21:29:01:60:e0 reason 1
    Aug  4 18:37:36
    info
    hostapd
    wlan0: STA 00:19:d2:9e:7a:81 IEEE 802.1X: Supplicant used different EAP type: 1 (Identity)
    Aug  4 18:37:36
    warn
    hostapd
    wlan0: STA 00:19:d2:9e:7a:81 IEEE 802.1X:  authentication failed - identity 'MYDOMAIN\myuser' EAP type: 0  (Unknown)
    Aug  4 18:37:36
    info
    hostapd
    The wireless client with MAC address 00:19:d2:9e:7a:81 had an authentication failure.
    Aug  4 18:37:36
    warn
    hostapd
    wlan0: STA 00:19:d2:9e:7a:81 IEEE 802.1X: could not extract EAP-Message from RADIUS message
    However, I do not see any error message on the ISA side. It actually tells me that the authentication happens fine. Any suggestion how I could troubleshoot this problem?
    Thank you in advance for your help and have a great day,
    Alex

    After investigation, I found that my ISA server was not configured properly. Here is the URL I used to configure it properly: http://technet.microsoft.com/en-us/library/cc779009(WS.10).aspx

  • Connecting n96 to WPA Enterprise

    Has anyone been able to connect a n96 to WPA Enterprise (TKIP Encryption; PEAP; EAP-MSCHAP v2) WLAN?
    thanks.

    Not sure what u mean by Enterprise but here is what I got my wireless router set with:
    Authentication: WPA-PSK and WPA2-PSK
    Encryption: TKIP
    Wireless Mode: 802.11b/g
    DTIM Period: 3
    Maximum Connection Rate: 53 Mbps
    I have mine set to a custom pass phrase key.
    When I used the WLAN scan on the handset, it found my wireless network very easy then all I had to do was select it then enter the pass phrase key. When I first started my Nokia PC Suite, my router said there was a conflict and placed my N96 with DMOZ Enabled. A quick reboot of the phone then everything working fine.
    I have a BT2700HGV router.
    Hope this is of some help to you

  • Mountain Lion won't connect to WPA-Enterprise

    Configuration: Macbook Pro (8,2) running OS X 10.8.3.
    My office's "IT Guy" changed our Wifi network recently, with the surprise side effect that the Mac users are now offline, including me.  The odd thing is that my iPhone connects very nicely, as does my Windows (Bootcamp).  When I'm booted into Windows and connected, here is the information I can glean from the network manager:
    Security Type: WPA-Enterprise
    Encryption Type: TKIP
    NW Authentication Method: PEIP
    He suggested I buy a little USB stick that would connect me, but that is over my "lame-ness" limit.  The fact that the iPhone can connect but the Macbook can't is a little worrisome.  Do I have any hope, assuming that firing the IT Guy and buying the USB stick are both off limits?

    I had a similar situation happen to me today. Connecting to an Enterprise WPA2 network, and it authenticated correctly via PEAP (MSCHAPv2) but still would not show a good Connected status.
    What seemed to work was to go into Network preferences, click the Advanced button, Select TCP/IP tab, and click Renew DHCP Lease.
    Not sure why the MacBook did not connect, while the iPhone did, but this seemed to give the connection a good Connected status and the exclamation point on the WiFi network went away.
    And it's been 15 minute and the user has not come back to bug me again!

  • Power Mac G4 won't connect to WPA Enterprise

    At the university that I work at we are updating our wireless network to use WPA Enterprise only, instead of WEP 802.1x and WPA Enterprise. The computer that I am having problems with is our test machine for writing connection documentation for the students, faculty, and staff. I can get the computer to access the network trough WEP 802.1x but not WPA Enterprise. The computer will start the connection process and then fail and not connect to the network.

    First, make sure you have at least these versions of the Airport software:
    107795- AirPort Card: When You Can Join a WPA Network
    Then read this article about set-up, including WPA Enterprise:
    107921- AirPort for Mac OS X 10.3 or later: Using different types of wireless security (WEP and WPA)
    "For a school or business, WPA Enterprise can provide each user with unique credentials. WPA Enterprise uses the same security as WPA Personal, but with the added measure of individual usernames and passwords (WPA Personal uses a shared password). Each wireless base station communicates with a RADIUS server to authenticate the user's credentials."
    "You may need the help of a network administrator to join an 802.1x network."

  • Does WET200 support WPA-Enterprise/TKIP?

    I could not connect a WET200 (newly bought) to our WPA-enterprise/TKIP wireless network.
    Can anyone tell me what was wrong? Does WET200 support WPA-enterprise? Please help!
    Thanks a lot.

    B**r!!!
    oh well, one can only hope that there'll be an upgrade real soon now
    Alex

  • LaserJet CP1525nw & WPA-enterprise

    We bought a LaserJet CP1525nw printer because of its airprint support for printing from our iPads. Our wireless network uses WPA-enterprise security.
     We are unable to connect the printer to the wireless due to the enterprise authentication. ipad is unable to find the printer.
     We need  printing from the iPads, ePrint does not offer.  Any help would be much appreciated. Firmware 20110329.

    Hello,
    If you have not already, I might recommend going here and then looking at the link for iPad printing for ePrint/Airprint or ePrint Home and Biz.  Good Luck!
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02784317&tmp_task=useCategory&cc=us&dlc=en&lang...
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • Extend WPA Enterprise

    Does anyone know if there is any way I can connect my Time Capsule to my University wireless network?
    I live right opposite my university and if I put my laptop on my window sill I can connect to the wireless, but can't connect from my desk... I was wanting to put my time capsule on my window sill, use that to connect to the Uni wireless and thus extend the connection into my room...
    Does anyone know a way to achieve this? My Uni uses WPA Enterprise encryption...
    Many thanks.
    Andrew.

    One possible option, with your existing equipment, would be to reconfigure your Mac as a "software" router by employing OS X's Internet Sharing feature. In this case you would be sharing the Mac's wireless Internet connection through its Ethernet port. Theoretically, you could then connect the TC to the Mac's Ethernet port; reconfigure the TC as a bridge, and then connect clients to the TC.
    Personally I haven't tried this to verify that it would work. Mainly because using a Mac as a software router is extremely limited as far as features that this would provide.

  • Remembering WPA Enterprise Network

    At my university, the wireless network is a WPA enterprise network. Each time I want to connect, I have to enter everything in manually. How do I get it to remember the network?

    Thank you both for your replies. I am trying iphitus ideia but am having trouble and the wiki doesn't have much info (not related to this issue at least).
    ifconfig -a related to the wireless interface:
    eth1 Link encap:Ethernet HWaddr 00:19:D2:1A:56:35
    inet6 addr: fe80::219:d2ff:fe1a:5635/64 Scope:Link
    UP BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:12 dropped:1347 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:38366 (37.4 Kb) TX bytes:3727 (3.6 Kb)
    Interrupt:16 Base address:0x4000 Memory:d8000000-d8000fff
    lsmod | grep ipw:
    ipw3945 200484 0
    ieee80211 30664 1 ipw3945
    sudo /usr/bin/netcfg-auto-wireless eth1
    :: Scanning for networks [DONE]
    :: eduroam up - Configuration generation failed: ctrl_interface=/var/run/wpa_supplicant [BUSY]
    ctrl_interface_group=0
    Passphrase must be 8..63 characters
    sudo netcfg2 eduroam
    :: eduroam up - Configuration generation failed: ctrl_interface=/var/run/wpa_supplicant [BUSY]
    ctrl_interface_group=0
    Passphrase must be 8..63 characters
    eduroam profile in /etc/network.d/:
    CONNECTION="wireless"
    INTERFACE=eth1
    SCAN="yes"
    SECURITY="wpa"
    ESSID="eduroam"
    KEY=<censored>
    IP="dhcp"
    TIMEOUT=30
    I don't think this information in the profile is enough, doesn't say which WPA protocol uses, nor the user (in the WPA Enterprise case) so I believe the problem might be related to that lack of info in the profile. The wiki didn't have an example for WPA enterprise though
    EDIT: Also my wpa_supplicant.conf is like the one on my first post with these aditional lines:
    ctrl_interface=/var/run/wpa_supplicant
    ctrl_interface_group=0
    Last edited by Grimn (2008-03-03 09:51:53)

  • WPA Enterprise won't authenticate

    I just upgraded my MacBook from Tiger to Leopard (latest upgrades installed). However now I can no longer access the wireless network at work. Each time I try the authentication fails. I should mention that when I had Tiger and connected it always gave me a warning about the certificate which I just clicked away and everything worked fine. With Leopard I don't get that warning, and don't get a connection. Nothing else has changed, and I can't remember the certificate message I got in Tiger.
    Any ideas?

    Don't know the answer to your question I'm afraid but what's the difference between WPA enterprise and WPA personal, and would I gain anything by using enterprise at home?

  • Wpa enterprise help

    I have a MacBook, that is running leopard. I am having trouble connecting to my schools wpa enterprise wireless. I am regestered to access the wireless, but am having trouble connecting. I think my problem is that i dont know how to tell the computer which domain on the wireless network. The connection i am trying to get has many domains.

    Ok, sorry for the super delayed response but I didn't have access to my laptop, then I was busy with midterms. I successfully connected manually with wpa_supplicant with this config file:
    [phil@pwned network.d]$ cat /etc/wpa_supplicant.conf
    ctrl_interface=/var/run/wpa_supplicant
    eapol_version=1
    ap_scan=1
    fast_reauth=1
    network={
    ssid="uw-secure"
    scan_ssid=1
    key_mgmt=WPA-EAP
    eap=PEAP
    identity="rofl"
    password="lolol"
    phase1="peaplabel=0"
    I then updated my uw-secure file so that it referenced the new wpa config file:
    [phil@pwned network.d]$ cat uw-secure
    CONNECTION="wireless"
    DESCRIPTION="secure uw"
    INTERFACE="wlan0"
    IP="dhcp"
    SECURITY="wpa-config"
    SCAN="YES"
    WPA_CONF="/etc/wpa_supplicant.conf"
    I then tried to connect with netcfg, and I got this:
    [phil@pwned network.d]$ sudo netcfg uw-secure
    :: uw-secure up
    wlan0 Interface doesn't support scanning : Device or resource busy
    wlan0 Interface doesn't support scanning : Network is down
    wlan0 Interface doesn't support scanning : Network is down
    wlan0 Interface doesn't support scanning : Network is down
    wlan0 Interface doesn't support scanning : Network is down
    - Network not present.
    any help would be appreciated.

Maybe you are looking for