WPA Enterprise won't authenticate

I just upgraded my MacBook from Tiger to Leopard (latest upgrades installed). However now I can no longer access the wireless network at work. Each time I try the authentication fails. I should mention that when I had Tiger and connected it always gave me a warning about the certificate which I just clicked away and everything worked fine. With Leopard I don't get that warning, and don't get a connection. Nothing else has changed, and I can't remember the certificate message I got in Tiger.
Any ideas?

Don't know the answer to your question I'm afraid but what's the difference between WPA enterprise and WPA personal, and would I gain anything by using enterprise at home?

Similar Messages

Power Mac G4 won't connect to WPA Enterprise

At the university that I work at we are updating our wireless network to use WPA Enterprise only, instead of WEP 802.1x and WPA Enterprise. The computer that I am having problems with is our test machine for writing connection documentation for the students, faculty, and staff. I can get the computer to access the network trough WEP 802.1x but not WPA Enterprise. The computer will start the connection process and then fail and not connect to the network.

First, make sure you have at least these versions of the Airport software:
107795- AirPort Card: When You Can Join a WPA Network
Then read this article about set-up, including WPA Enterprise:
107921- AirPort for Mac OS X 10.3 or later: Using different types of wireless security (WEP and WPA)
"For a school or business, WPA Enterprise can provide each user with unique credentials. WPA Enterprise uses the same security as WPA Personal, but with the added measure of individual usernames and passwords (WPA Personal uses a shared password). Each wireless base station communicates with a RADIUS server to authenticate the user's credentials."
"You may need the help of a network administrator to join an 802.1x network."

Mountain Lion won't connect to WPA-Enterprise

Configuration: Macbook Pro (8,2) running OS X 10.8.3.
My office's "IT Guy" changed our Wifi network recently, with the surprise side effect that the Mac users are now offline, including me. The odd thing is that my iPhone connects very nicely, as does my Windows (Bootcamp). When I'm booted into Windows and connected, here is the information I can glean from the network manager:
Security Type: WPA-Enterprise
Encryption Type: TKIP
NW Authentication Method: PEIP
He suggested I buy a little USB stick that would connect me, but that is over my "lame-ness" limit. The fact that the iPhone can connect but the Macbook can't is a little worrisome. Do I have any hope, assuming that firing the IT Guy and buying the USB stick are both off limits?

I had a similar situation happen to me today. Connecting to an Enterprise WPA2 network, and it authenticated correctly via PEAP (MSCHAPv2) but still would not show a good Connected status.
What seemed to work was to go into Network preferences, click the Advanced button, Select TCP/IP tab, and click Renew DHCP Lease.
Not sure why the MacBook did not connect, while the iPhone did, but this seemed to give the connection a good Connected status and the exclamation point on the WiFi network went away.
And it's been 15 minute and the user has not come back to bug me again!

Connecting MBA to domain using WPA Enterprise

Hi guys!
I'm having "the usual" new MBA WiFi-problems, meaning my MBA keeps dropping the WiFi connection occasionally, but that's going on in another thread.
I don't know whether this is a related problem, but I can't seem to connect the MBA to the WiFi network at the office at all. The network connection dialog tells me my connection needs WPA Enterprise credentials, but no matter what I write, I won't get connected.
So I'll start with the basics. This works for every other device I have (PC laptop, iPhone, iPads and so on):
Username: \\MyDomain\MyUserName
Password: MyPassword
But not for the MBA. For the domain/username, I've tried single \´s and /´s and just about any combination just in case this is a "Mac syntax thing" (this is my first Mac laptop), with and without the MyDomain part, lowercase, uppercase, quotation marks around the password (as I saw mentioned in some thread in the case of alphanumeric WEP, or some such), but nothing works. I don't remember the exact error message, but it has to do with the authentication server perhaps not being available.
Apparently others have had problems with the WPA Enterprise connections as well, but could somebody just confirm that the \\MyDomain\MyUsename -syntax I'm using is indeed correct.
Cheers,
Kim

Marc,
I'm suprised that WPA works over WDS. I had thought that because WPA cycles the encryption key with each message transmission that the two Airport devices would quickly get out of sync.
But I do respect Alan's opinion, so I'd give in to his statement that it does work, I'll be searching through the update readme's to see when it started working.
You could always drop back to WEP encryption. Unless you have the FBI next door listening in and analysing all your network traffic, it's not going to be broken.
WPA changes the encryption key with each wireless message, WEP doesn't. So in theory, with WEP, someone could analyse all your network traffic, looking for patterns. You can work out just how hard that is.
If you choose an obvious password (like from a dictionary) it won't matter if you're on WPA instead of WEP, the Feds / hackers will be in in a short time.

WPA Enterprise on Palm Pre

We have found that the Palm Pre will not connect to our WPA Enterprise wireless system, because our network needs clients to eliminate the "validate server certificate" process. For example, our standard laptops use the SecureW2 client and the "validate server certificate" needs to be disabled in the client software. If this option is enabled, the SecureW2 client won't connect either (just like the Palm Pre won't).
How can this be done on a Palm Pre?
Thanks.
PS-- the Palm Pre connects perfectly to WPA personal networks
Post relates to: Pre p100eww (Sprint)

juhanima wrote:
If the WiFi setup doesn't require a user certificate, you should select "None" for a certificate when defining the connection. The CA certificate(s) you installed earlier are used automatically as long as they are enabled for WiFi usage.
Here are the settings for the network for a Nokia N82. Maybe, this will help shed some light on the issue. FYI - I could not make these settings work for my Nokia N8 as well. The IT help desk says they are unable to solve the issue.
juhanima wrote:
The connection dialog is supposed to show only actual user certificates to choose from, but it is a known bug in the current N9 FW that if you install something that is not a CA certificate it is taken for a user certificate by default and shown as an option in the connection dialog. The bug will be fixed in the next FW update I believe.
I have only installed one CA certificate (the one which can be found at the link I provided above). It does not ask for any password when I install it. When I go to Certificate Manager and try to change the password it informs that there is no password for the certificate.
juhanima wrote:
On the other hand, if the connection does require a user certificate you should have received one from the network's administrator in a PKCS#12 package with a password. You need the password when installing the package and later when using the private key related to the user certificate. But it sounds like this is not the case, so just select "None".
Hope this helps.
Juhani Mäkelä
Harmattan certificate manager maintainer
So I did choose "None" as certificate. EAP Type - PEAP and EAP MSCHAPv2 as the EAP method. I could not connect to the network using these settings. The certificate was installed at this point. If I try connecting using the certifcate it asks me for the password. So, right now, it is a problem connecting to the network. Would appreciate any help in this regard.
Cheers
Rahul

IPhone and WPA- Enterprise

My school has Wifi with WPA - Enterprise? Is there any way I can get on the network with the current software loaded onto the iPhone?

My school has Wifi with WPA - Enterprise? Is there
any way I can get on the network with the current
software loaded onto the iPhone?
I'm having the same problem at work. My MacBook Pro is asked for a username and password. Unfortunately the iPhone only asks for a password.
I thought I'd reply to your question so it would bounce back up to the top of the list.
Can anyone confirm that the iPhone is or is not able to authenticate using WPA-Enterprise?

Does the iPhone support WPA Enterprise?

Hi,
I'm really keen to purchase an iPhone when they appear over here in the UK.
We've just rolled out a wireless network here configured to use WPA Enterprise i.e. no WEP. Our baseline config is WPA/TKIP and after that you use EAP-PEAP/MSCHAPV2 or EAP-TTLS/MSCHAP to authenticate using your university userid and password.
When i was configuring our 802.1X network, the one operating system that beat everything else out there hands down was OS X. It didn't matter if it was wired or wireless, OS X just worked. It was a joy to use ... unlike Windoze.
I sort of assumed that as the iPhone had OS X in the middle it would have the same capabilities as the desktop systems. However, I've heard a couple of snippets saying that it only supports WEP. Is that the case?
It would be a major pain in the a**e if it only supported WEP. While I could set up a separate SSID for an iPhone network I'd really really rather not.
Anyone got any info on the iPhones wireless capabilities?
TIA
Alex

B**r!!!
oh well, one can only hope that there'll be an upgrade real soon now
Alex

Some Wireless clients won't authenticate to 887VA-W

Hi folks
I've swapped over a few months ago from an 877w router to an 887VAw which has a separate AP in-built, and there are a few wireless clients that had no problem authenticating to the 877w but just refuse to communicate to the 887VA-W.
The clients in question are set top box type devices : (1)Now TV and (2) Sky Wireless Adapter.
They have no problem seeing the SSID's being broadcast, and for troubleshooting I've setup an open test SSID without any encryption, but the clients still won't authenticate and grab an ip address, or more accurately they just don't get a dhcp ip address so I don't think authentication is really the issue. I don't know why these clients aren't happy with dhcp on the guest vlan (vlan2) where other clients get an ip address and work fine. Perhaps the fact I'm using vlan1 (being used for the Eap-Fast home wlan) as the native untagged vlan might have something to do with it? If I use a static ip address on the guest vlan (vlan 2 / ip 10.1.1.n ) then the Sky Wireless Adapter can send and receive packets across the wlan.
Can anybody please suggest some debugs or config changes to try and nail the problem? The relevant configs from the AP is pasted below, and the router below that.
Brgds, Tim
aaa new-model
aaa group server radius rad_eap
server name rs-local
aaa authentication login default local
aaa authentication login eap_methods group rad_eap
aaa authentication ppp default local
aaa authorization exec default local
dot11 ssid home
   vlan 1
   authentication open eap eap_methods
   authentication network-eap eap_methods
   authentication key-management wpa version 2
dot11 ssid guest
   vlan 2
   authentication open
   authentication key-management wpa
   mbssid guest-mode
   wpa-psk ascii 7 abcdef123
dot11 ssid test
   vlan 3
   authentication open
   mbssid guest-mode
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 1 mode ciphers aes-ccm
encryption vlan 2 mode ciphers aes-ccm
broadcast-key vlan 1 change 30
broadcast-key vlan 2 change 43200
ssid home
ssid guest
ssid test
antenna gain 0
mbssid
speed basic-1.0 basic-2.0 basic-5.5 basic-11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
packet retries 64 drop-packet
no preamble-short
station-role root
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
no cdp enable
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.2
encapsulation dot1Q 2
no ip route-cache
no cdp enable
bridge-group 2
bridge-group 2 subscriber-loop-control
bridge-group 2 spanning-disabled
bridge-group 2 block-unknown-source
no bridge-group 2 source-learning
no bridge-group 2 unicast-flooding
interface Dot11Radio0.3
encapsulation dot1Q 3
no ip route-cache
no cdp enable
bridge-group 3
bridge-group 3 subscriber-loop-control
bridge-group 3 spanning-disabled
bridge-group 3 block-unknown-source
no bridge-group 3 source-learning
no bridge-group 3 unicast-flooding
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
no ip route-cache
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface GigabitEthernet0.2
encapsulation dot1Q 2
no ip route-cache
bridge-group 2
bridge-group 2 spanning-disabled
no bridge-group 2 source-learning
interface GigabitEthernet0.3
encapsulation dot1Q 3
no ip route-cache
bridge-group 3
bridge-group 3 spanning-disabled
no bridge-group 3 source-learning
interface BVI1
ip address 172.27.44.2 255.255.255.0
no ip route-cache
ip default-gateway 172.27.44.1
****Router Config****
interface Wlan-GigabitEthernet0
description Internal switch interface connecting to the embedded AP
switchport mode trunk
no ip address
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered BVI1

Hi Sebastian
Please see ip dhcp debug from 887VA-W showing the Sky client requesting an ip address but failing to get one. Also a debug from an 877-W showing successful dhcp assignment. Also the dhcp config as requested.The successful trace shows 2 mac addresses from the Sky wireless adapter/ Sky box each getting a dhcp address. I don't know whether the failure is a bug in the 887 dhcp code or some config in the embedded AP that needs tweaking.
Bregs, Tim
The Sky wired adapter (I think it's the mac of the sky box lan port) mac is 00:19:FB:A4:B2:1A
The Sky wireless mac is 18:28:61:99:7B:A8
887VA-W Debug - Failure:
887#term mon
887#sh deb
DHCP server packet debugging is on.
887#
887#
000141: Dec 16 07:03:02.082 London: DHCPD: ARP entry exists (10.1.1.10, e0c9.7ad6.24ee).
000142: Dec 16 07:03:02.082 London: DHCPD: unicasting BOOTREPLY to client e0c9.7ad6.24ee (10.1.1.10).
Denham_887#
000143: Dec 16 07:05:25.536 London: DHCPD: client's VPN is .
000144: Dec 16 07:05:25.536 London: DHCPD: No option 125
000145: Dec 16 07:05:25.536 London: DHCPD: DHCPDISCOVER received from client 0019.fba4.b21a on interface BVI1.
000146: Dec 16 07:05:25.536 London: DHCPD: Allocate an address without class information (10.1.1.0)
000147: Dec 16 07:05:25.536 London: DHCPD: Saving workspace (ID=0x4000009)
Denham_887#
000148: Dec 16 07:05:27.536 London: DHCPD: Reprocessing saved workspace (ID=0x4000009)
000149: Dec 16 07:05:27.536 London: DHCPD: DHCPDISCOVER received from client 0019.fba4.b21a on interface BVI1.
000150: Dec 16 07:05:27.536 London: DHCPD: Sending DHCPOFFER to client 0019.fba4.b21a (10.1.1.12).DHCPD: Setting only requested parameters
000151: Dec 16 07:05:27.536 London: DHCPD: no option 125
000152: Dec 16 07:05:27.536 London: DHCPD: broadcasting BOOTREPLY to client 0019.fba4.b21a.
Denham_887#
000153: Dec 16 07:05:32.468 London: DHCPD: New packet workspace 0x123EC554 (ID=0xC700000A)
000154: Dec 16 07:05:32.468 London: DHCPD: client's VPN is .
000155: Dec 16 07:05:32.468 London: DHCPD: No option 125
000156: Dec 16 07:05:32.468 London: DHCPD: DHCPDISCOVER received from client 0118.2861.997b.a8 on interface BVI1.
000157: Dec 16 07:05:32.468 London: DHCPD: Allocate an address without class information (10.1.1.0)
000158: Dec 16 07:05:32.472 London: DHCPD: Saving workspace (ID=0xC700000A)
Denham_887#
000159: Dec 16 07:05:34.080 London: DHCPD: New packet workspace 0x1240A47C (ID=0x5500000B)
000160: Dec 16 07:05:34.080 London: DHCPD: client's VPN is .
000161: Dec 16 07:05:34.080 London: DHCPD: No option 125
000162: Dec 16 07:05:34.080 London: DHCPD: DHCPDISCOVER received from client 0019.fba4.b21a on interface BVI1.
000163: Dec 16 07:05:34.080 London: DHCPD: Sending DHCPOFFER to client 0019.fba4.b21a (10.1.1.12).DHCPD: Setting only requested parameters
000164: Dec 16 07:05:34.080 London: DHCPD: no option 125
000165: Dec 16 07:05:34.080 London: DHCPD: broadcasting BOOTREPLY to client 0019.fba4.b21a.
Denham_887#
000166: Dec 16 07:05:34.468 London: DHCPD: Reprocessing saved workspace (ID=0xC700000A)
000167: Dec 16 07:05:34.468 London: DHCPD: DHCPDISCOVER received from client 0118.2861.997b.a8 on interface BVI1.
000168: Dec 16 07:05:34.468 London: DHCPD: Sending DHCPOFFER to client 0118.2861.997b.a8 (10.1.1.13).DHCPD: Setting only requested parameters
000169: Dec 16 07:05:34.468 London: DHCPD: no option 125
000170: Dec 16 07:05:34.468 London: DHCPD: broadcasting BOOTREPLY to client 1828.6199.7ba8.
Denham_887#
000171: Dec 16 07:05:35.476 London: DHCPD: client's VPN is .
000172: Dec 16 07:05:35.476 London: DHCPD: No option 125
000173: Dec 16 07:05:35.476 London: DHCPD: DHCPDISCOVER received from client 0118.2861.997b.a8 on interface BVI1.
000174: Dec 16 07:05:35.476 London: DHCPD: Sending DHCPOFFER to client 0118.2861.997b.a8 (10.1.1.13).DHCPD: Setting only requested parameters
000175: Dec 16 07:05:35.476 London: DHCPD: no option 125
000176: Dec 16 07:05:35.476 London: DHCPD: broadcasting BOOTREPLY to client 1828.6199.7ba8.
Denham_887#
000177: Dec 16 07:05:37.520 London: DHCPD: client's VPN is .
000178: Dec 16 07:05:37.520 London: DHCPD: No option 125
000179: Dec 16 07:05:37.520 London: DHCPD: DHCPDISCOVER received from client 0118.2861.997b.a8 on interface BVI1.
000180: Dec 16 07:05:37.520 London: DHCPD: Sending DHCPOFFER to client 0118.2861.997b.a8 (10.1.1.13).DHCPD: Setting only requested parameters
000181: Dec 16 07:05:37.524 London: DHCPD: no option 125
000182: Dec 16 07:05:37.524 London: DHCPD: broadcasting BOOTREPLY to client 1828.6199.7ba8.
Denham_887#
000183: Dec 16 07:05:40.532 London: DHCPD: client's VPN is .
000184: Dec 16 07:05:40.532 London: DHCPD: No option 125
000185: Dec 16 07:05:40.532 London: DHCPD: DHCPDISCOVER received from client 0118.2861.997b.a8 on interface BVI1.
000186: Dec 16 07:05:40.532 London: DHCPD: Sending DHCPOFFER to client 0118.2861.997b.a8 (10.1.1.13).DHCPD: Setting only requested parameters
000187: Dec 16 07:05:40.532 London: DHCPD: no option 125
000188: Dec 16 07:05:40.532 London: DHCPD: broadcasting BOOTREPLY to client 1828.6199.7ba8.
Denham_887#
000189: Dec 16 07:05:43.540 London: DHCPD: client's VPN is .
000190: Dec 16 07:05:43.540 London: DHCPD: No option 125
000191: Dec 16 07:05:43.540 London: DHCPD: DHCPDISCOVER received from client 0118.2861.997b.a8 on interface BVI1.
000192: Dec 16 07:05:43.540 London: DHCPD: Sending DHCPOFFER to client 0118.2861.997b.a8 (10.1.1.13).DHCPD: Setting only requested parameters
000193: Dec 16 07:05:43.540 London: DHCPD: no option 125
000194: Dec 16 07:05:43.540 London: DHCPD: broadcasting BOOTREPLY to client 1828.6199.7ba8.
Denham_887#
000195: Dec 16 07:05:48.884 London: DHCPD: client's VPN is .
000196: Dec 16 07:05:48.884 London: DHCPD: No option 125
000197: Dec 16 07:05:48.884 London: DHCPD: DHCPDISCOVER received from client 0019.fba4.b21a on interface BVI1.
000198: Dec 16 07:05:48.884 London: DHCPD: Sending DHCPOFFER to client 0019.fba4.b21a (10.1.1.12).DHCPD: Setting only requested parameters
000199: Dec 16 07:05:48.884 London: DHCPD: no option 125
000200: Dec 16 07:05:48.884 London: DHCPD: broadcasting BOOTREPLY to client 0019.fba4.b21a.
887VA-W dhcp config:
887#sh run | section dhcp
no ip dhcp use vrf connected
ip dhcp binding cleanup interval 10
no ip dhcp conflict logging
ip dhcp pool home
network 172.27.44.0 255.255.255.0
dns-server 208.67.222.222 208.67.220.220
default-router 172.27.44.1
ip dhcp pool test
import all
network 11.1.1.0 255.255.255.0
default-router 11.1.1.1
dns-server 208.67.222.222 208.67.220.220
ip dhcp pool guest
import all
network 10.1.1.0 255.255.255.0
default-router 10.1.1.1
dns-server 208.67.222.222 208.67.220.220
877-W Debug - Success:
877#deb ip dhcp se
877#deb ip dhcp server pa
DHCP server packet debugging is on.
877#deb ip dhcp server ev
DHCP server event debugging is on.
877#
000258: *Jun 23 22:20:07.087 BST: DHCPD: checking for expired leases.
000259: *Jun 23 22:20:14.684 BST: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   1828.6199.7ba9 Associated SSID[guest] AUTH_TYPE[OPEN] KEY_MGMT[WPAv2 PSK]
000260: *Jun 23 22:20:16.289 BST: DHCPD: Sending notification of DISCOVER:
000261: *Jun 23 22:20:16.289 BST:   DHCPD: htype 1 chaddr 1828.6199.7ba8
000262: *Jun 23 22:20:16.289 BST:   DHCPD: remote id 020a00000a010101f2000000
000263: *Jun 23 22:20:16.289 BST:   DHCPD: circuit id 00000000
000264: *Jun 23 22:20:16.289 BST: DHCPD: DHCPDISCOVER received from client 0118.2861.997b.a8 on interface BVI2.
000265: *Jun 23 22:20:16.289 BST: DHCPD: Seeing if there is an internally specified pool class:
000266
*Jun 23 22:20:16.289 BST:   DHCPD: htype 1 chaddr 1828.6199.7ba8
000267: *Jun 23 22:20:16.289 BST:   DHCPD: remote id 020a00000a010101f2000000
000268: *Jun 23 22:20:16.289 BST:   DHCPD: circuit id 00000000
000269: *Jun 23 22:20:16.289 BST: DHCPD: Sending DHCPOFFER to client 0118.2861.997b.a8 (10.1.1.9).
000270: *Jun 23 22:20:16.289 BST: DHCPD: broadcasting BOOTREPLY to client 1828.6199.7ba8.
000271: *Jun 23 22:20:16.493 BST: DHCPD: DHCPREQUEST received from client 0118.2861.997b.a8.
000272: *Jun 23 22:20:16.493 BST: DHCPD: Sending notification of ASSIGNMENT:
000273: *Jun 23 22:20:16.493 BST: DHCPD: address 10.1.1.9 mask 255.255.255.0
000274: *Jun 23 22:20:16.493 BST:   DHCPD: htype 1 chaddr 1828.6199.7ba8
000275: *Jun 23 22:20:16.493 BST:   DHCPD: lease time remaining (secs) = 86400
000276: *Jun 23 22:20:16.493 BST: DHCPD: Appending system default domain
000278: *Jun 23 22:20:16.493 BST: DHCPD: Sending DHCPACK to client 0118.2861.997b.a8 (10.1.1.9).
000279: *Jun 23 22:20:16.493 BST: DHCPD: broadcasting BOOTREPLY to client 1828.6199.7ba8.
000280: *Jun 23 22:20:17.089 BST: DHCPD: checking for expired leases.
000281: *Jun 23 22:20:18.097 BST: %SYS-5-CONFIG_I: Configured from console by vty0
Denham#
000282: *Jun 23 22:20:21.314 BST: DHCPD: Sending notification of DISCOVER:
000283: *Jun 23 22:20:21.314 BST:   DHCPD: htype 1 chaddr 0019.fba4.b21a
000284: *Jun 23 22:20:21.314 BST:   DHCPD: remote id 020a00000a010101f2000000
000285: *Jun 23 22:20:21.314 BST:   DHCPD: circuit id 00000000
000286: *Jun 23 22:20:21.314 BST: DHCPD: DHCPDISCOVER received from client 0019.fba4.b21a on interface BVI2.
000287: *Jun 23 22:20:21.314 BST: DHCPD: Seeing if there is an internally specified pool class:
000288: *
Jun 23 22:20:21.314 BST:   DHCPD: htype 1 chaddr 0019.fba4.b21a
000289: *Jun 23 22:20:21.314 BST:   DHCPD: remote id 020a00000a010101f2000000
000290: *Jun 23 22:20:21.314 BST:   DHCPD: circuit id 00000000
000291: *Jun 23 22:20:21.314 BST: DHCPD: Sending DHCPOFFER to client 0019.fba4.b21a (10.1.1.8).
000292: *Jun 23 22:20:21.314 BST: DHCPD: broadcasting BOOTREPLY to client 0019.fba4.b21a.
000293: *Jun 23 22:20:21.406 BST: DHCPD: DHCPREQUEST received from client 0019.fba4.b21a.
000294: *Jun 23 22:20:21
406 BST: DHCPD: Sending notification of ASSIGNMENT:
000295: *Jun 23 22:20:21.406 BST: DHCPD: address 10.1.1.8 mask 255.255.255.0
000296: *Jun 23 22:20:21.406 BST:   DHCPD: htype 1 chaddr 0019.fba4.b21a
000297: *Jun 23 22:20:21.406 BST:   DHCPD: lease time remaining (secs) = 86400
000298: *Jun 23 22:20:21.406 BST: DHCPD: Can't find any hostname to update
000299: *Jun 23 22:20:21.406 BST: DHCPD: Sending DHCPACK to client 0019.fba4.b21a (10.1.1.8).
000300: *Jun 23 22:20:21.406 BST: DHCPD: broadcasting
BOOTREPLY to client 0019.fba4.b21a.
000302: *Jun 23 22:20:33.049 BST: DHCPD: Sending notification of DISCOVER:
000303: *Jun 23 22:20:33.049 BST:   DHCPD: htype 1 chaddr 1828.6199.7ba8
000304: *Jun 23 22:20:33.049 BST:   DHCPD: remote id 020a00000a010101f2000000
000305: *Jun 23 22:20:33.049 BST:   DHCPD: circuit id 00000000
000306: *Jun 23 22:20:33.049 BST: DHCPD: DHCPDISCOVER received from client 0118.2861.997b.a8 on interface BVI2.
000307: *Jun 23 22:20:33.049 BST: DHCPD: Seeing if there is an internally specified pool class:
000308
Denham#: *Jun 23 22:20:33.049 BST:   DHCPD: htype 1 chaddr 1828.6199.7ba8
000309: *Jun 23 22:20:33.049 BST:   DHCPD: remote id 020a00000a010101f2000000
000310: *Jun 23 22:20:33.049 BST:   DHCPD: circuit id 00000000
000311: *Jun 23 22:20:33.049 BST: DHCPD: Sending DHCPOFFER to client 0118.2861.997b.a8 (10.1.1.9).
000312: *Jun 23 22:20:33.053 BST: DHCPD: broadcasting BOOTREPLY to client 1828.6199.7ba8.
000313: *Jun 23 22:20:33.081 BST: DHCPD: DHCPREQUEST received from client 0118.2861.997b.a8.
000314: *Jun 23
Denham# 22:20:33.081 BST: DHCPD: Sending notification of ASSIGNMENT:
000315: *Jun 23 22:20:33.081 BST: DHCPD: address 10.1.1.9 mask 255.255.255.0
000316: *Jun 23 22:20:33.081 BST:   DHCPD: htype 1 chaddr 1828.6199.7ba8
000317: *Jun 23 22:20:33.081 BST:   DHCPD: lease time remaining (secs) = 86400
000318: *Jun 23 22:20:33.081 BST: DHCPD: Appending system default domain
000319: *Jun 23 22:20:33.085 BST: DHCPD: Using hostname 'skywirelessconnector.indahouse.dyndns.org.' for dynamic update (from hostname opti
indahouse#uon)
000320: *Jun 23 22:20:33.085 BST: DHCPD: Sending DHCPACK to client 0118.2861.997b.a8 (10.1.1.9).
000321: *Jun 23 22:20:33.085 BST: DHCPD: broadcasting BOOTREPLY to client 1828.6199.7ba8.

Does WET200 support WPA-Enterprise/TKIP?

I could not connect a WET200 (newly bought) to our WPA-enterprise/TKIP wireless network.
Can anyone tell me what was wrong? Does WET200 support WPA-enterprise? Please help!
Thanks a lot.

B**r!!!
oh well, one can only hope that there'll be an upgrade real soon now
Alex

LaserJet CP1525nw & WPA-enterprise

We bought a LaserJet CP1525nw printer because of its airprint support for printing from our iPads. Our wireless network uses WPA-enterprise security.
We are unable to connect the printer to the wireless due to the enterprise authentication. ipad is unable to find the printer.
We need printing from the iPads, ePrint does not offer. Any help would be much appreciated. Firmware 20110329.

Hello,
If you have not already, I might recommend going here and then looking at the link for iPad printing for ePrint/Airprint or ePrint Home and Biz. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02784317&tmp_task=useCategory&cc=us&dlc=en&lang...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Extend WPA Enterprise

Does anyone know if there is any way I can connect my Time Capsule to my University wireless network?
I live right opposite my university and if I put my laptop on my window sill I can connect to the wireless, but can't connect from my desk... I was wanting to put my time capsule on my window sill, use that to connect to the Uni wireless and thus extend the connection into my room...
Does anyone know a way to achieve this? My Uni uses WPA Enterprise encryption...
Many thanks.
Andrew.

One possible option, with your existing equipment, would be to reconfigure your Mac as a "software" router by employing OS X's Internet Sharing feature. In this case you would be sharing the Mac's wireless Internet connection through its Ethernet port. Theoretically, you could then connect the TC to the Mac's Ethernet port; reconfigure the TC as a bridge, and then connect clients to the TC.
Personally I haven't tried this to verify that it would work. Mainly because using a Mac as a software router is extremely limited as far as features that this would provide.

Remembering WPA Enterprise Network

At my university, the wireless network is a WPA enterprise network. Each time I want to connect, I have to enter everything in manually. How do I get it to remember the network?

Thank you both for your replies. I am trying iphitus ideia but am having trouble and the wiki doesn't have much info (not related to this issue at least).
ifconfig -a related to the wireless interface:
eth1 Link encap:Ethernet HWaddr 00:19:D2:1A:56:35
inet6 addr: fe80::219:d2ff:fe1a:5635/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:12 dropped:1347 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:38366 (37.4 Kb) TX bytes:3727 (3.6 Kb)
Interrupt:16 Base address:0x4000 Memory:d8000000-d8000fff
lsmod | grep ipw:
ipw3945 200484 0
ieee80211 30664 1 ipw3945
sudo /usr/bin/netcfg-auto-wireless eth1
:: Scanning for networks [DONE]
:: eduroam up - Configuration generation failed: ctrl_interface=/var/run/wpa_supplicant [BUSY]
ctrl_interface_group=0
Passphrase must be 8..63 characters
sudo netcfg2 eduroam
:: eduroam up - Configuration generation failed: ctrl_interface=/var/run/wpa_supplicant [BUSY]
ctrl_interface_group=0
Passphrase must be 8..63 characters
eduroam profile in /etc/network.d/:
CONNECTION="wireless"
INTERFACE=eth1
SCAN="yes"
SECURITY="wpa"
ESSID="eduroam"
KEY=<censored>
IP="dhcp"
TIMEOUT=30
I don't think this information in the profile is enough, doesn't say which WPA protocol uses, nor the user (in the WPA Enterprise case) so I believe the problem might be related to that lack of info in the profile. The wiki didn't have an example for WPA enterprise though
EDIT: Also my wpa_supplicant.conf is like the one on my first post with these aditional lines:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
Last edited by Grimn (2008-03-03 09:51:53)

Wpa enterprise help

I have a MacBook, that is running leopard. I am having trouble connecting to my schools wpa enterprise wireless. I am regestered to access the wireless, but am having trouble connecting. I think my problem is that i dont know how to tell the computer which domain on the wireless network. The connection i am trying to get has many domains.

Ok, sorry for the super delayed response but I didn't have access to my laptop, then I was busy with midterms. I successfully connected manually with wpa_supplicant with this config file:
[phil@pwned network.d]$ cat /etc/wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
eapol_version=1
ap_scan=1
fast_reauth=1
network={
ssid="uw-secure"
scan_ssid=1
key_mgmt=WPA-EAP
eap=PEAP
identity="rofl"
password="lolol"
phase1="peaplabel=0"
I then updated my uw-secure file so that it referenced the new wpa config file:
[phil@pwned network.d]$ cat uw-secure
CONNECTION="wireless"
DESCRIPTION="secure uw"
INTERFACE="wlan0"
IP="dhcp"
SECURITY="wpa-config"
SCAN="YES"
WPA_CONF="/etc/wpa_supplicant.conf"
I then tried to connect with netcfg, and I got this:
[phil@pwned network.d]$ sudo netcfg uw-secure
:: uw-secure up
wlan0 Interface doesn't support scanning : Device or resource busy
wlan0 Interface doesn't support scanning : Network is down
wlan0 Interface doesn't support scanning : Network is down
wlan0 Interface doesn't support scanning : Network is down
wlan0 Interface doesn't support scanning : Network is down
- Network not present.
any help would be appreciated.

WPA Enterprise Connectivity

Hi - I'm currently in Baton Rouge, LA and attend school at LSU. Our wireless network, lsusecure, is WPA Enterprise, which is supposed to be compatible with iPhone 2.0. The problem is, I can't seem to connect to the network. I enter my LSU username and password, which works for connecting on a computer, and it consistently says "connecting to lsusecure" but nothing ever happens. I was just wondering if I will have to enter in more information about the network rather than just using my regular login information. If anyone could help, I would greatly appreciate it, as Tech Services at LSU currently has no information on how to connect.

Guidedbyvoip, sorry your IT Dept is no help.
But, here at LSU, we are here to help! Hope these directions can work for you as well, instead of needing a 3rd party config util!
ccastl1, please follow the following directions to configure your iPhone to connect to our LSUSECURE wireless network.
Note: The device must be updated to firmware 2.0 in order to connect to lsusecure
1. Select "Settings"
2. Select "Wi-Fi"
3. Make sure Wi-Fi is turned on. If the device is connected to any other network other than lsusecure (it will usually connect to lsuwireless first) you must remove that network before connecting to lsusecure.
4. Select the network it is connected to by pressing on the blue arrow to the right of the name.
5. Select "Forget this Network"
6. Choose "Forget Network"
7. Select lsusecure
8. Enter your PAWS Username & Password and press "Join" at the bottom right of the keyboard.
9. Accept the certificate by pressing "Accept"
You are now connected to lsusecure!
Please contact us directly if you have any further questions or problems!
Thanks!
< Message was edited by: Host to remove email address>

Cannot switch between WPA2 and WPA Enterprise WiFi locations.

Hello Everyone,
I have two Wifi locations I use, a WPA2 and a WPA Enterprise. When I switch locations from one to the other it looks as if that the Airport express resets but does not let go of the active location. I have to manually turn airport off and then on again to have it kick in. Anyone experience this and have a work around?
Thanks in advance,
K.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

WPA Enterprise won't authenticate

Similar Messages

Maybe you are looking for