WPA on R100 Wireless LAN

Hi,
I am a bit confused why there are 6 or 8 different WLAN drivers for the R100.
I am trying to access a WLAN which has WPA (not WEP) encryption. Is this possible? When I use the Win XP network settings, I can't access a WPA option.
Is this possible?
Thanks

Hello Andrew
Like you can see on the download page there are listed 8 different drivers but if you check company column you will see that there are drivers for a few different WLAN cards manufacturers.
Please check in device manager which one is listed under network adapters and download the latest driver listed on Toshiba download page. I am not 100 % sure but I believe that your unit doesnt support WPA encryption. The same problem is on my Tecra notebook.

Similar Messages

Annoying behaviour on WPA Enterprise wireless LAN

I have a PB 1.67 running OS X 10.3.9 (all patches installed)
When I connect it to our WPA Enterprise wireless LAN, I experience the following annoying behaviour.
Authentication may be slow (sometimes 10 to 15 minutes), but connection usually succeeds.
Then while I am actively web browsing or retrieving email, things are ok. However if I have to leave the computer for about 3 or more minutes, it seems to decide that it should no longer be on the network and I have to disconnect and then reconnect.
No send/rec errors show up in the info tab of network utility. IP address is there, status is active and the link is reported as 54Mb. It appears that my machine is not interested in participating on the network until it has been reconnected.
Does anybody have any ideas on how to track down what might be happening?
Thanks in advance.

A follow up:
I have observed that when I am this non-working state, my 802.1x authentication status shows idle.
Is there a way that I can trace what is happening at the 802.1x layer?

WPA issue on Intel(R) PRO/Wireless LAN 2100 3B

Hi,
I'm trying to use the WPA authentication using my Toshiba's Tecra S1 with an integrated Intel(R) PRO/Wireless LAN 2100 3B. I've read that this adapter supports WPA. I've installed the newest drivers under my Windows xp SP2, but the OS doesn't allows me to select WPA authentication in the wireless properties.
Any help is wellcome.
Thanks in advance.

Hi
The Wlan encryption standard you will find in the WLan properties.
You have to select you SSID and click on the properties.
If there you will not find any option for WPA so this WLan miniPCI card doesnt support this encryption option.
Note: This option depends on the hardware and not on the software. You cannot enable the encryption by updating any drivers or any SP.

HP Officejet 6500, Windows XP and 7, wireless LAN security code is not accepted

The security code of my wireless LAN is not accepted by the HP6500A. According to the diagnostic software of HP a code consisting of more than 50 characters is required (the total number of characters can not be identified because the code isgoing on out of the window). The security code of the route consists of 12 characters. Resetting the printer is not solving the problem.
This problem was identified after rinstalling the software after problems with printing: connection with the printer was identified; message: "busy with printing", but no printing result at all.

Security codes can be in ASCII or HEX. I'm guessing that the diagnostics is reporting HEX and the printer entry is in ASCII.
You can try running the diagnostics SW on the Windows 7 computer. It might return the key in ASCII.
A good option is to get the password from somewhere other than the diagnostics. Maybe you stored it somewhere or wrote it down? Once you get it try to enter from the front panel.
Can I get a little information from you?
What router brand model?
What security mode are you using (WEP, WPA, WPA2)?
Which model of the 6500 do you have (6500 or 6500a)?
Please mark the post that solves your problem as "Accepted Solution"
Sometimes it takes several posts back and forth to get to a solution - please be patient.
I am employed by HP

IOS 5 can't connect to WPA/WPA2 Enterprise Wireless Network

After upgrading multiple iPhone 4 (CDMA versions) to IOS 5.0, I have not been able to get them to connect to our WPA/WPA2 Enterprise wirless network. We use a Cisco Wireless LAN Controller. The wireless network is capable of doing WPA or WPA2 Enterprise with PEAP. These phones all connected to this network fine before the upgrade.
When connecteding to the network, it prompts me for the username and password and when I tap join it sits for about 10-15 seconds then says "Unable to join the network" with a Dismiss button.
It connects to non-Enterprise networks just fine. I have tested it on WPA Personal and WPA2 Personal networks and it has worked on several without issue.
I have tried "forget this network" with no success.
Is anyone else having this problem? I know of at least three Verizon iPhone 4's that have this exact same problem. I haven't seen one working with this configuration yet.

I have the same problem:
Cisco WLC's -> WPA2 Enterprise AES + EAP-PEAP 802.1x with CCKM
Pre 5.0 - all worked fine
Post 5.0 - it tries to connect and after few moments i get error - couldn't connect.
Info from controller:
10/17/2011 12:16:37 CEST           INFO           172.16.16.X           Sending EAP request to client from radius server. 6.f. ..l
10/17/2011 12:16:38 CEST           ERROR           172.16.16.X           Retransmitting EAP-ID request to client,retransmission timer expired. 5.y. ..l
10/17/2011 12:16:39 CEST           ERROR           172.16.16.X           Retransmitting EAP-ID request to client,retransmission timer expired. 5.y. ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           Authentication failed for client as EAP ID request from AP reached maxmium retransmissions. 5.yp ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           De-authentication sent to client. 5.oP ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           5.yp ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           EAPOL-key is invalid, scheduling client for deletion. 5.yp ..l
On the Radius server i don't see any activity regarding this device.
I had this network configured on my iPhone - after upgrade and restore it remembered it. Every time i was in vicinity of my Enterprise WLAN it tried to connect - resulting int express battery drain - 6-7 hrs and battery was empty from 100%

N82 V30.0.013 Bluetooth and Wireless LAN problems

I am using an N82, but it looks like there are similar problems with everything using similar firmware. I didn't have any of these problems with the V20 firmware that came with the phone or after the first V20 upgrade I used.
I find that my wireless LAN connections sometimes only let me browse a few pages before I get the "web connection timed out" message. If I change wireless LAN connection (I have two, mostly for testing purposes) I can continue browsing. Of course the same error may happen causing me to switch again. Sometimes it just works. Both have WPA set up and the passwords are clearly correct. If I use Real Player I can typically listen for as long as I like. Sometimes the connection to the server will drop for Real Player but reconnecting will work (don't have to change wireless LAN network). With the web browser it seems like the data connection is dead, not a server timing out - the message appears instantly. I think have seen the same problem once with my 3G connection, but I haven't recreated it. Could be my imagination!
I have never had any problems with IMAP email using either the Nokia client or Profimail on either the wireless LAN connection or 3G. It leads me to believe that there is nothing wrong with the wireless LAN side of things and it may be more to do with the web browser, or perhaps just that the email clients are only talking to one server helps (DNS problems?). Has anyone experienced similar problems with an alternative browser?
I have also found that when I get to work my bluetooth dongle doesn't connect to my phone. If I disable/enable bluetooth on my phone it will connect. I had this problem with my N80 with the first firmware I had on it and the problem went away after an upgrade.
So, it seems that both connections are fixed by turning them off and on again.

Having both routers the same IP address is a little bit confusing, but possible since each router creates it's own subnet and provides full PNAT support. Actiontec DSL modem has to have DHCP enabled since Linksys WAN (not LAN) port should be connected to one of 4 Actiontec LAN ports. Linksys should not have any configuration setup in regards of your WAN account. Just set it to dynamic address. In ohter words:
1. RJ-11 connect to Actiontec mode/router.
2. Actiontec modem should be configured to acquire an IP address from Verizon and to provide all authentication info to Verizon.
3. Actiontec modem should be configured to allow clients to acquire dynamic IP addresses -- DHCP enabled.
4. Linsys WAN (not LAN!) port should be connected to Actiontec LAN port.
5. Linksys should be configured to acquire dynamic IP address and no authentifacations.
6. Configure Linksys to be DHCP enabled or you can use static IP addresss if you want.
7. Wireless devices would be connected to Linksys and on the way to the Internet addresses would go through double NAT conversions. Any wired device connected to Linksys would have similar features. Any device connected to Linksys should be able to connect 192.168.1.1 assigned to Linksys, but not to Actiontec.
8. To be able to connect Linksys and Actiontec would no be able to communicate unless you split 192.168.1.0/24 into smaller subnets and set specific routes in the table. But even you do so you will not be able to access 192.168.1.1 accross subnets boundary.
Hope it helps.

Wireless LAN driver can't load after BIOS update NB550D

Hi
I have a new NB550D and have jst installed the recommended BIOS update. Now the Wireless LAN driver can't load (error code 31).
I tried installing the lestest driver off the Toshiba website but it still can't be loaded by Windows...
Everything was fine before this! Any ideas?

> In the Device Manager the Atheros Wireless is shown
This means that the Wlan driver was installed properly and the issue could be related to configuration between Wlan card and Wlan router.
You should check if the notebook can connect to Wlan router without the usage of any encryption settings.
Disable the WEP/WPA encryption and test the connectivity. Of course this should be done only for test attempts.
Are you sure that the Wlan is enabled? Enable this using FN + F8

Weird lost access to iMac's desktop via Airport Extreme wireless LAN

This is weird and complicated. I'll try to keep it simple.
1. Two computers on a wireless LAN via Airport Extreme: G4 Powerbook and 20" G5 iMac. The LAN has worked flawlessly and seamlessly for several years, and except for this ONE anomaly, still does.
2. When logged-in to the iMac from the Powerbook, all its files and contents show up normally in it's networked-drive window in Finder,
3. EXCEPT the desktop. And I mean the real desktop which is under my ID under USERS.
4. Searching the Powerbook from the iMac, however, works just fine and shows all of the Powerbook's contents.
Repairs of Permissions on both computers have accomplished nothing.
There is one other peculiar symptom: there was a .wmv movie file sent me by a friend, and I had a copy of it on the desktops of both computers. It sat there, showed up and ran just fine, until one day something curious happened:
The file would show up in the column-view Finder window of the iMac's desktop when I opened it from the Finder Window, but would, after about a second, disappear!
If I try to import, on the Powerbook, some random file into the iMac's Desktop folder, it appears for a brief second and then the folder once again displays as empty.
I have trashed that wmv file, and yet sometimes its name blinks up on the iMac's desktop list (that is, again, the column view display in the Finder window).
This is profoundly weird.
Oh, and there's nothing changed or weird about the SHARING settings. Personal File Sharing is enabled on both computers, as is Printer Sharing, and itunes music sharing is also enabled. All of these continue to work just fine. Firewall is enabled, but always has been.
Owen

Well, when in doubt try all the obvious things FIRST!
I rank Disk Utility from the install disk, did a disk repair, and, well, Bob's your uncle, and all is fine again. Apparently that ghost file screwed up the count of files (I'm not sure what that means, but it seems consistent with a file that would materialize and then disappear, and screw up display of a folder's contents - the folder it was lurking-in invisibly.
Very peculiar, none the less.
Owen
I'll leave this open for another day, if only to see if someone has an explanation for what may have happened, since that might be useful to others, besides satisfying my own curiosity.

Remote System Explorer on a Wireless LAN

On a wireless LAN when I use Remote System Explorer, it knocks our Fieldpoint network modules off-line. We are unable to ping them. Once we restart the units, they work fine until someone uses the Remote System Explorer again. Any ideas?

We have FP1600s and FP2015s. It only affects certain FP1600s. Firmware revision is 3.0 on the 1600s. Some older ones are not affected and some newer ones are. We configure them in the shop on a LAN, then move them to a field environment. The only firewall is point of entry onto the post.
When using Remote System Explorer (the latest and greatest version), one at a time is "knocked off line". Every time Remote System Explorer refreshes another 1600 is knocked off line. I see no relevance to a crossover cable. This occurs over a WLAN. If we don't use Remote System Explorer then they just chug along fine.
I have used the FP1600 Diagnostic Utility which was a mistake. Now the status LEDs blinks red 7 times.

Lenovo Yoga 13 Downgrade to Windows 7 Wireless Lan Driver & USB3.0 Driver

Hey guys,
I have purchased the Yoga 13 in U.A.E in last Feb. with AED4,999.00
But some programms does not work with Windows 8. So I am using Windows7 with multi-boot.
Guess you guys also have such problem.. eventually finding out the WIFI Driver & USB3.0 Driver.
Now, I have succeeded in installing both of them.
1. Wireless Lan Driver : Realtek RTL8723A Wireless LAN 802.11n USB 2.0 Network Adapter.
   The way I found this driver is... Download all the REALTEK driver in a designated folder.. of course uncompressed.
   And then using the contraol panel... updated the driver with the designated folder.
   Now it is working very well.
2. USB3.0 Driver
It was an easy game. I just have downloaded thee Intel USB3.0 Driver for Windows7... you could find it through google with easy.
And just installed it. It works very well.
=> You could download the file at http://me2.do/xKBVnWo3
      (just put password : 4321 )
If you guys have problem with above issues... or need the file let me know with my mail at xxxxxxxxxxx
Anyhow, there are still two drivers I couldn't find.
Jerry Bong
Moderator note; e-mail address removed to stop the spambots getting it

hi jerrybong,
Thank you for Sharing this,
This will really Help most of Yoga 13 users and Windows 7 fans,
Kudos for this!
Can you also let us know what are drivers you're still missing? Can you post the Hardware ID of those maybe we can help,
Thanks and Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Windows 8 and Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC

Hi!
I hava a Toshiba L650 - 107 PSKI JE and I am having a problem with the my wireless network adapter on windows 8.
My network adapter is Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC and works fine on windows 7. Two days ago I formatted my hard drive and install windows 8. The problem is that for much drivers I keep installing, The wireless keep turned off. There's no way I can move the slide from off to on.
I already tried a lot of drivers from toshiba and from realtek but doesn't work.
I went to see the Network Connections (Control Panel > Network and Internet > Network Connections) and the Ethernet is fine, I connect a cable and it is fine, but wi-fi says "Not connected".
How do I solve this problem?

Satellite L650-107 (PSK1JE-00P003EP)
Downloads here.
A computer from Portugal? (Specifications attached.)
This driver should work on Windows 8.
Realtek Wireless LAN Driver
But your problems may be more fundamental. Prior to loading Toshiba-specific programs, you probably need to install something like this.
Toshiba System Driver - Windows 8 beta
And for the function keys to work, you'll need still another Toshiba utility.
-Jerry
Attachments:
satellite_l650.pdf ‏3264 KB

Wireless LAN does not work after restart

Hey
My brand new laptop suddenly went blank earlier today and when I restarted it I noticed my wireless internet won't work. It is also asking me to install some new driver, the Network Controller? I am confused as everything was working fine and suddenly it's not. Anyone any ideas? :-/

Hi,
maybe you should try to install the driver for your wireless lan card. I mean, if some application damaged the driver or installed something which interferes with the wireless lan card then you should try to fix it with an reinstallation of the driver.
Heres a [LINK|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp] to the drivers download page from Toshiba. Pick your model and your operating system and download the driver which fits for your wireless lan card.
Greets

Warning page on Cisco Wireless Lan Controller for guest access

Hi,
We have an Cisco wireless LAN controller 4400 in our organization, and lots of guest using our Wi-Fi network.
I would like to configure a warning and terms and condition page when guest using first time our network.
Can you please let me know is that possible without adding external web server and how to configure.
Many Thanks in Advance
Amit Sharma

Hi Amit,
Hope you are doing great!!
the below link will help you in getting the issue resolved!!
http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00809bdb5f.shtml
Please dont forget to rate the usefull posts!!
Regards
Surendra

What are the following:1)Cisco 1600 Series IOS WIRELESS LAN RECOVERY. 2)Service Provider Option 60 for Vendor Class Idenfier

What are the following:1)Cisco 1600 Series IOS WIRELESS LAN RECOVERY. 2)Service Provider Option 60 for Vendor Class Idenfier
These items are listed with 1600 series AP but I'm unable to understand what are these things & the use of them

DHCP Option 60: Go HERE.

Issues after changing the AP Name on Wireless LAN Controller

I recently changed the AP Name of all the Wireless Access Points in my branch office (which are all associated to the branch office Wireless LAN Controller(s)). After that I noticed that all branch office employees are unable to connect to the employee SSID. The employee SSID uses web authentication and employees are authenticated using Head Office AD via Cisco ACS, both located at the Head Office.
There are other SSID's on the WLC which all work fine, but only employee SSID which uses AD authentication does not work. AD authenticaion is working fine because employee's in HO are successfully able to connect to the employee SSID at HO.
The branch office is connected to the HO via a tunnel link. We noticed that if we restart both the ASA at either ends of the tunnel. The employee SSID starts working again but only temporarily for a day or so... what could be the issue? Can renaming the AP's cause issues? How can I fix this problem?
Thanks in advance

Thanks Elliott,
I did the debug like you said and I am getting the following debug messages:
*apfMsConnTask_0: Jun 20 08:18:14.580: Deleting the client immediatly since WLAN is changed
and also
*apfReceiveTask: Jun 20 05:25:11.857: 00:1f:3c:86:af:15 Orphan Packet from 192.168.52.34
The logging on the WLC shows
*apfReceiveTask: Jun 18 17:56:41.788: %MM-1-ANCHOR_UNAVAILABLE: mm_mobile.c:2155
All export anchors are down. Cannot anchor the client.00:c0:a8:f3:cd:ae
The DHCP pool for the employee users are configured on a guest WLC which sits behind an ASA

WPA on R100 Wireless LAN

Similar Messages

Maybe you are looking for