WPA PSK doesn't work with MAC Authentication. AP1231G
Hi, yesterday I've installed an Aironet Access Point 1200 series AP1231G for the first time.
I'd like to use MAC Authentication with an WPA Pre-Shared Key. But it doesn't work. If I choose "Open Authentication with MAC Authentication", I can't type an WPA Pre-Shared Key. The system doesn't keep it.
It only works with "Open Authentication" without MAC-Filter.
Settings:
Encryption Manager: TKIP
SSID Manager
1. Client Authentication: Open Authentication with MAC Authentication
2. Key Managemnet: Mandatory WPA + WPA Pre-Shared-Key
If I type in a Pre-Shared-Key and click on "Apply", the Pre-Shared-Key get loss.
Tina,
In Cisco IOS releases 12.3(4)JA and later, you cannot enable both MAC-address authentication and WPA-PSK.
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_configuration_guide_chapter09186a00804e7d09.html#wp1034916
Similar Messages
-
iPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?
At least to 10.6.8. You must do this to upgrade to Mountain Lion.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps. -
Apple Keyboard with number pad doesn't work with Mac Pro?
I have a Mac Pro, and have used an Apple Keyboard with a number pad (not bluetooth) with it for quite a while, with no problems. But then my keyboard broke and I ordered a replacement Apple Keyboard with a number pad (not bluetooth). This keyboard doesn't work with my Mac Pro. I have it plugged in, but I can't get the Mac Pro to consistently recognize that there is a USB keyboard connected to it. What magical stuff do I have to do to get the keyboard to be fit for purpose?
It would not hurt to try an SMC Reset. (But if it does not help, it adds credence to lllaass assertion that the keyboard is not working.)
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support -
Lexmark scanner doesn't work with mac os x
I have a problem with my scanner lexmark p4330. For two weeks now it doesn't work with my imac. I have the imac os x 10.7.5.
When I try to scan, my printer displays "the all in one driver did not respond" and in Image Capture it displays "lexmark language error".
I updated my softwares, there's one for lexmark but I can't install it and I don't know why!
Can someone help me please?Mmm. Not sure what's going on. Has scanning ever worked with the OS you are currently running?
A couple of suggestions (my last two I think as I'm running out of ideas ). I realise that your problems are only with scanning, but sometimes resetting the printing system resloves printing problems. I wonder whether it will help with the scanning issue given that Print & Scan are lumped together in System Preferences. To do it go to:
System Preferences>Print & Scan, Control+Click or Right Click on the printer on the left and select 'reset printing system'. All printers will be deleted and need to be added again using the '+' button.
If that doesn't help my last suggestion is to download the paid for app VueScan (which you can run in demo mode for free) to see whether it works or not. VueScan is very good and driving numerous types of scanners:
http://www.hamrick.com -
Camera Raw 5.7 doesn't work with MAC Elements 6
RAW 5.7 doesn't work on Elements 6.
5.6 works fine, placing the plugin in the /PLUG-INS/CS3/FILE FORMATS and starting Elements 6 and trying to open a raw file says
Unable to use camera raw plugin
It is not compatible with this version of Photoshop Elements
I have read the 5.7 raw read-me and it definitely says that it is compatible with MAC Elements 6 could somebody confirm this?Thank you, another case of big corporations screwing over the little guy. You want the latest update - you have to upgrade your complete software package. Wouldn't it be nice if they made the plugin compatible with the products as stated in their documentation and then posted a note saying that further updates will not be compatible?
After all, windows users got a version 7, us poor MAC users didn't!
Anyway thanks for the answers. -
Hi,
I tried downloading the free Firefox. As soon as I clicked on it a message popped up and said it wasn't compatible with my Mac.
My Mac is 104.11 and I cannot afford to buy another computer right now. The screens say it is compatible with MAC 10.4.11...
Any suggestionsSadly, Firefox no longer includes support for MacOS 10.4, however you can still use browsers similar to Firefox. <br>
[http://www.tenfourfox.com/ TenFourFox] is an unofficial build of Firefox for older Macs, and so will work on your computer. However since you are using a really old computer, it doesn't have all the features Firefox has. <br>
[http://caminobrowser.org/ Camino] is a community project to make the best Gecko-based browser for Macs around. Unlike TenFourFox it doesn't try to be Firefox, but instead does its own thing. <br>
[http://www.seamonkey-project.org/ SeaMonkey] is another community effort and is a continuation of the original Mozilla Suite which shares a few similar properties with Firefox. SeaMonkey is great for people who like their browsing experience retro. -
Problem with Internet Key Onda Mt835Up: It doesn't work with mac os 10.6.6
Hi I have a problem with internet key Onda MT835UP. It doesn't work, because my imac is more new than internet key.
Can you help me? Can you send me the upgrade for this internet key?
ThanksI have called Onda, there isn't the driver for Mac OS X 10.6.7 and they don't know if it'll be released.
So if you have a Mac it's better to not buy Onda internet key,
instead it's better to choose other brands that update the drivers of their products. -
ITunes doesn't work with MAC OS X 10.7
Since I installed MAC OS X 10.7 I can't open iTunes. I already downloaded the final update. This is what it says:
Process: iTunes [1537]
Path: /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier: com.apple.iTunes
Version: 10.4 (10.4)
Build Info: iTunes-10408001~1
Code Type: X86-64 (Native)
Parent Process: launchd [129]
Date/Time: 2011-07-29 20:52:06.822 -0400
OS Version: Mac OS X 10.7 (11A390)
Report Version: 8
Sleep/Wake UUID: D756ECA5-4D18-4BE0-BF59-43BD0218E2F4
Interval Since Last Report: 12823 sec
Crashes Since Last Report: 13
Per-App Crashes Since Last Report: 12
Anonymous UUID: 61349C85-3637-4325-9671-CA8FB59A691C
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
@executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
Binary Images:
0x10c189000 - 0x10d0b9fe7 com.apple.iTunes (10.4 - 10.4) <73B152D5-6088-0047-3C63-0A466B55E7EF> /Applications/iTunes.app/Contents/MacOS/iTunes
0x7fff6bd89000 - 0x7fff6bdbe1ff dyld (195 - ???) <71093406-21CF-3DBE-A001-802259ED5300> /usr/lib/dyld
Model: MacBookPro7,1, BootROM MBP71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 5.100.198.11 )
Bluetooth: Version 2.5.0b13, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK2555GSXF, 250.06 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24600000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06610000 / 6
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x06300000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x06500000 / 2"Did you install Lion via the official MAS(Mac APP Store) . I'm curious about the OS version and build Number 11A390 in your initial report. That build # seems like a developer build number. That could be the reason the error message says "make sure iTunes works with this version of Mac OS X"."
"It's not iTunes. If you bought Lion from the MAS, I'm not sure what to do, but if you did not buy Lion from the MAS, you may want to post the same question in the Developer Forum" -
Magic Charger Mobee for Magic Mouse doesn't work with Mac OS X lion Mountain
The Magic Charger Mobee for Magic Mouse Apple
with Mac OS X lion Mountain
makes connections overflows and stops the system work.
What could I do, other that disconnect Magic Charger?When you say you cannot add the printer, with the Add Printer pane open, is the 6250 visible in the Default Add Printer view? If no then it could be the USB cable at fault and I suggest you try another cable.
If the printer is visible but the Mac fails to locate a driver when you select it then you may have to trash the contents of the BJPrinters folder (HD > Library > Printers > Canon) and then run the iX6250 driver installer again. -
Remote file access doesn't work with Mac and Q10
I'm running the latest BlackBerry Link (version 1.20, build 7) and Mac OS X (version 10.9) software on my Mac Mini computer.
I setup BlackBerry Link for remote file access.
On my Q10 in File Manager I see my Mac computer but for some reason I don't see any folders. It's just a black blank screen. My carrier is Telus.
In link I chose folders to access. It seems like everything is setup properly and I still see only a black blank screen on my Q10.
Any Mac users have this issue?Me too. None of the sync functions/remote file access/wifi sync using BB Link are working for me. I have a Mac (10.8.5) and a BB Z10 (10.2.0.429). I hope BB comes up with a solution soon.
-
HP 7310 scanner doesn't work with Mac Mountain Lion
I just tried to scan a photo on my 7310 Officejet All-in-one. It tells me I need to install software for this feature. I know I scanned a photo with this same setup before. However I upgraded to Mountain Lion and now it's not working. I tried to find a download but the HP site tells me all my printer downloads are installed. How do I get the scanner to work? If this is a common problem for people using Mountain Lion why not just create a download for all of us to run? Or a patch perhaps? Thanks for your help.
sc00ba,
I am sorry you are having the issue with your software.
1.) Did you uninstall the software before attempting to reinstall it?
2.) Have you looked at this document to assist in the installation?
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03378792&cc=us&dlc=en&lc=en&os=4142&product=391...
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
WebOS1.4 doesn't work with Mac OS 10.4
Can I revert to the older Pixi OS? I need to use my Pixi as a USB device, but the new software says you have to have OS 10.5
How old is your Mac? Or ehitch Mac do you have? Mac OS X 10.5 minimum requirements:
A Mac computer with an Intel, PowerPC G5, or Power PC G4 (867 MHz or faster) processor
512 MB memory or more
A DVD drive for installation
9 GB of available disk space or more
Try upgrade OS. -
HP Envy 5530 e-all-in-one Does Not Work With Mac
Just bought an HP Envy 5530 all-in-one. It does not print through Safari and possibly other Mac applications. Does not frame the page properly even with "print page" and prints slower than 1 page per minute, even with no background images. My old HP had no problem with Safari. Phone support tells me there is no driver or fix. So I will return the device. Seems crazy. I now see othr commenters saying it doesn't work with Mac. If HP's no longer works with major Mac applications, they will be returned in droves. Anyone know why or know of a fix?
I am having the same issue. Did you ever find a solution?
-
Trying to load a downloaded version of illustrator 6cs onto new mac and the old activation code for my illustrator cs doesn't work with it. Do I need a new code or am I missing something? Same goes for my Photoshop cs.
you need your serial number.
if you purchased from or registered with adobe check your account, https://www.adobe.com/account.html -
Trying to set up Apple TV with ATT Uverse. I get errors when trying to enter my WiFi password. One site says that Apple TV doesn't work with Uverse because it uses WPA for encryption. If true, does that mean Uverse subscribers cannot use Apple TV?
Spurs63 wrote:
does that mean Uverse subscribers cannot use Apple TV?
No, that's a rather silly conclusion.
There are two options:
stop using the crappy router provided by the ISP.
Physically connect the ATV to the router via Ethernet.
Maybe you are looking for
-
Hiya, I want to create classes dynamically. I know that this can be done by extending ClassLoader and defineClass method. My problem is i dont know what goes in byte[] coz my program needs to get the class name, attributes and methods from the user.
-
Duties are not flowing in ARE3
Hi All, I created the deemed Export Excise Invoice and also the licence. but while creating the ARE3 document duties are not flowing in ARE3. please guide me Please note that the duties are flowing correctly in the Excise Invoice. Regards
-
I recently ordered a television and I was told I'd get a phone call within 24 hours of delivery to let me know what time it would come. First, I emailed customer support, but the response was that I wouldn't hear anything back within 24 hours b/c of
-
Looking for recommenda​tions on 46" -52" TV
I recently bought an LCD Sony TV at costco and was very disappointed . I had adjusted all of the settings correctly but the latency in starting up and overall picture quality was fair at best when looking at fios regular TV. I am looking for recomm
-
when i use jpcap in the JpcapCaptor.java class in this method NetworkInterface[] getDeviceList(); my project stop and that is an error that wpcap.dll not found please help me