WPA security changeover from WEP

I would like to increase the security level on my wireless network(air port extreme). Presently I am using WEP. What is the best NEW security level suggested and how can I most cleanly move up to, say, WPA enterprise level?

See if this helps.
http://docs.info.apple.com/article.html?artnum=107795
http://docs.info.apple.com/article.html?artnum=166684
Don

Similar Messages

I changed my WRT54G security settings from WPA to WEP

I changed my WRT54G security settings from WPA to WEP and now one of my latops (Dell 5100) will not connect wirelessly. It is using a linksys wireless-B notebook adapter. I am at a loss at how to reconnect this to my wireless network.

Go to the setup page of the router on the wired computer and click on the Wireless tab,check the network name(SSID),change the Wireless Channel to 11-2.462 GHz,Keep the SSID broadcast enable and click on save settings...Click on the subtab Wireless Security and change the Security mode to WEP or WPA as per your requirement.If you are using WEP then,note down the KEY1 as the network key(case sensitive)...
Now,on the laptops,delete the preferred network and then,try to connect the Wireless Network.

Is it possible to change the network security on an older Ibook G3 from WEP to WPA? There is no WPA option on the drop down menu.

After several frustrating attempts to connect the IBook G3 10.4.11 OS (I have no idea if that is a Lion or a Seahorse or whatever) to my wi-fi network I realized that the problem is the security setting. The only security option is WEP but my router is WPA2. Is there a work around or would it be necessary to purchase a new(er) Airplay card (which I'm not willing to do)? I also have no inclination to alter the security settings on my router as I have several other devices already connected. It's either alter the software settings on the IBook G3 or forget it. I'm also assuming that I would be unsuccessful at connecting the G3 even if I used an ethernet cable. Please verify.
I don't mind if this question is hijacked to explain the options I've already ruled out, for those who may be willing to do so.
Thanks

The iBook's 802.11b - only AirPort card can use WPA but not WPA2. The card cannot be upgraded. USB wireless adapters may be an option worth considering though I have none to recommend.
I'm also assuming that I would be unsuccessful at connecting the G3 even if I used an ethernet cable.
That's not correct. All iBooks have Ethernet ports. Using it would obviate its need for wireless security. Other than the need for a cable, Ethernet beats wireless in all respects.

I have a netgear n300 router broadcasting my wpa secured wireless network and bought an airport express to extend the network. I did an Ethernet setup from a MacBook, got the green checkmark but no extension. help.

I have a net gear n300 router transmitting my WPA secured network, and I bought an airport express to use as a network extender. I configured it via an Ethernet cable from a MacBook using manual setup in airport utility. I got the green checkmark at the end, but it is not extending my signal. Can you help me?

Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of Wireless Distribution System (WDS)...so it very unlikely that your Netgear router can be extended wirelessly with the AirPort Express Base Station (AX).
The few non-AirPort routers that are known to work are:
Linksys WRT54G or WRT54GS (not v5)
Belkin F5D7230-4 and F5D7231
BT Voyager 2091
Netgear WGR614 v6
Buffalo WGR-G54

Photosmart B 209 no longer sees WIFI network since I've moved from WEP to WPA

My HP Photosmart was working well until my ISP has asked me to change the name of my WIFI network (now includes underscore symbols) and the protection type has changed from WEP to WPA....Paswword has not changed, it's just the type of protection
Since then, the printer doesn't see anymore the WIFI network. I've printed a Network report and it says I need to check that SSID network & printers are the same....
My old network SSID was : Freebox and it has moved to : FREEBOX_BRUNO_DH.
Where can this be changed on the printer ???
Thanks for your help
Regards
This question was solved.
View Solution.

Why is your ISP dictating what your SSID name will be??? This is not right. You can make the SSID name anything you want, but I would not use what your ISP has said. It's YOUR network, do what you want. Make the SSID and password for you.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Wireless-Card doesn't not work with WPA/WPA2 but with WEP [Solved]

Hello I have a MacBook (late 2007) with a wireless-card from Broadcam, the card works with WEP and the classic configuration over rc.conf very well. But I can't get the card running with WPA and the net network-profiles.
Here is the link to the driver - http://www.broadcom.com/support/802.11/linux_sta.php
eth2 = wireless-card
eth1 = firewireanything
eth0 = wired-card
rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="UTC"
USEDIRECTISA="no"
TIMEZONE="Europe/Berlin"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
#MODULES=(sky2 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="macbook"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
eth0="eth0 192.168.1.220 netmask 255.255.255.0 broadcast 192.168.1.255"
INTERFACES=(!eth0 !eth1 eth2)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.1.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
NETWORKS=(wireless)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network net-profiles netfs alsa crond portmap fam hal)
/etc/network.d/wireless
CONNECTION="wireless"
INTERFACE=eth2
HOSTNAME=macbook
IP="static"
IFOPTS="192.168.1.225 netmask 255.255.255.0 broadcast 192.168.1.255"
GATEWAY=192.168.1.1
DNS1=192.168.1.1
# Wireless Settings (optional)
ESSID=3Com
#KEY=
IWOPTS="mode managed essid $ESSID channel 11"
#WIFI_INTERFACE=wlan0 # use this if you have a special wireless interface
# that is linked to the real $INTERFACE
#WIFI_WAIT=5 # seconds to wait for the wireless card to
# associate before bringing the interface up
USEWPA="yes" # start wpa_supplicant with the profile
WPAOPTS="" # use "" for normal operation or specify additional
# options (eg, "-D ipw")
# see /etc/wpa_supplicant.conf for configuration
Can I set here the WPA/WPA2-Key also? Why here ESSID? Do I need still a configuration in wpa_supplicant.conf?
Thats very confusing and not explained.
WPAOPTS? Do I need to add something like "-D wext"?
/etc/wpa_supplicant.conf
# This is a network block that connects to any unsecured access point.
# We give it a low priority so any defined blocks are preferred.
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
network={
key_mgmt=NONE
priority=-9999999
network={
ssid="3Com"
proto=WPA
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk="topsecret"
priority=5
# WPA2
# proto=WPA RSN
I need help. Please
Last edited by hoschi (2009-01-04 20:21:58)

fwojciec wrote:If this info is not in the wiki it might be worth it to add it -- it's all detailed in /etc/network.d/examples/complete.example though.
Thats the reason why I was so confused.
My new and well working configuration:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="UTC"
USEDIRECTISA="no"
TIMEZONE="Europe/Berlin"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
#MODULES=(sky2 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="macbook"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
eth0="eth0 192.168.1.220 netmask 255.255.255.0 broadcast 192.168.1.255"
INTERFACES=(!eth0 !eth1 !eth2)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.1.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
NETWORKS=(3com)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network net-profiles netfs alsa crond portmap fam hal)
CONNECTION="wireless"
DESCRIPTION="Very verbose complete wireless example"
INTERFACE=eth2
HOSTNAME=macbook
# Interface Settings (use IP="dhcp" for DHCP)
IP="static"
IFOPTS="192.168.1.225 netmask 255.255.255.0 broadcast 192.168.1.255"
GATEWAY=192.168.1.1
# DNS Settings (optional)
DOMAIN=localdomain
DNS1=192.168.1.1
DNS2=
SEARCH=
# Standard Wireless Settings
ESSID=3Com
SECURITY=wpa-config # One of wep, wpa, wpa-config, none
KEY=""
# Scans to see if network is available before connecting (reccomended)
SCAN="YES"
# Time to wait to connect to a network. Default 15.
TIMEOUT=10
# Pass *custom* options to iwconfig. Usually not needed (optional)
IWOPTS="mode managed essid $ESSID channel 6 key restricted $KEY"
# Any extra arguments for wpa_supplicant
WPA_OPTS=
# For SECURITY='wpa-config' only - filename of a wpa-supplicant config
WPA_CONF=/etc/wpa_supplicant.conf
# This is a network block that connects to any unsecured access point.
# We give it a low priority so any defined blocks are preferred.
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
network={
key_mgmt=NONE
priority=-9999999
network={
ssid="Linksys"
proto=WPA RSN
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk="areulookingatmybreasts"
priority=5
network={
ssid="3Com"
proto=WPA
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk="nomam"
priority=5
# WPA2
# proto=WPA RSN
There are also profiles for the Linksys-Router and for wired cable.
Thanks for the help!
Last edited by hoschi (2009-01-04 20:21:23)

WPA Security w/ Non-Apple Wireless Base?

I'm upgrading from an original Airport BS and was curious to see if anyone has purchased a wireless "N" station from another compatible brand such as Netgear?
My question is about security. If I purchase a non-Apple router, how do I set up WAP security?
Thank you!
Rick...

Setting up WPA security (or WEP for that matter) on a non-AirPort device, is pretty much the same. Most non-AirPort routers, like Belkin, D-Link, or Linksys, use a web-based administration format. Most also include a CD with automated setup for Windows-based devices.
I suggest that you download a copy of the user's manual for the particular router you are interested in and take a look at how wireless security is established before you make a purchase.

WPA Security with the F5D7230-4

Hey,
I've successfully bridged my Airport Express from my Belkin F5D7230-4 with WEP Security enabled and it worked very well. Well, I should actually rephrase that; it worked well for all the Macs. The only PC on the wireless network couldn't establish a consistent connection, so I had to change the security to WPA and now everybody's computers work very well (WPA is actually desired). The only problem with WPA is that I can't get WDS to work with it, in other words, the Airport Express won't connect to the Belkin. After configuring the settings the same way as before (except changing the security) the Airport Express will first stay solid yellow, turn green for 2 or 3 seconds, and then flash yellow again. I have tried changing the wireless channel, and telling the Airport Express to just join (not WDS) while the Airport Express next to the Belkin, but still nothing worked.
Wireless bridging is infact enabled on the Belkin, and I've also tried allowing only certain access points to connect, but that didn't work either.
Is it possible that I'm not able to use WPA security with WDS on this Belkin router?
It's a F5D7230-4 Belkin Router with 4.05.03 firmware, and the latest firmware is on the Airport Express.
Thanks for any help in advance.

Do you mean to get into the network? I do have a password WPA password set, and that's why the Airport Express can't access it.
I need WPA set because a: the PC on the network needs it in order to connect, and b: it's much more secure.
I pretty much need to have the security because the Belkin has it on, and to my understanding, the Airport Express also needs to have it enabled to work.
Is there any update or anything available that could help my problem, or am I pretty much out of luck?

WPA security Types are missing after upgrading to Windows 8.1

After upgrading from Windows 8 Pro 64bit to Windows 8.1 Pro 64bit on my Sony Vaio Duoe 13, I could not find WPA security type while configuring Wireless network manually. (only WPA2 and 802.1X are available).
I have done a lot of troubleshootings like
1-Reinstall Wirless original driver
2-Updating the wireless driver to the latest
3-Uninstall and reinstall windows 8 then upgrading again to windows 8.1
But the same.
Is there any way to add WPA to the security type?

Yes! It works!
To recap : My laptop has an Atheros AR9002WB-1NG adapter, windows 8.1. Even when it had windows 8, it was unable to connect, but unlike now, I didn't look closely enough about the type of network. Originally I thought it was
this problem. But they confirmed that others with windows 8 had no issues with this. Then , when I tried configuring the network manually, I could not find the WPA-enterprise option at all, only the
WPA2-enterprise.
So here I was, and Greg Seth's answer gave me an idea.
In the following instructions, some commands are obvious, so I won't explain unless necessary. So here's what you do :
0) Go to command line, preferably Administrator (not tried without).
1) C:\Windows\System32> cd \Users\<User>\Documents
2) C:\Users\<User>\Documents> netsh
3) netsh> wlan
4) netsh wlan> show profiles
5) delete profile name=<yournetwork>
Enclose the name of network within quotes, this is to ensure that you can cleanly set up the right profile. Don't close the netsh, we'll need it some more. If you do, just reach there the same way as before.
6) Right click the connection icon in lower right corner > open Network and Sharing Center > Set up a new connection or network > Manually connect to a wireless network
7) Try to create a profile, and try to get as many details to correspond with your requirement. The rest we'll edit in command line, so let's make it as easy as possible.
8) Do the same at the next screen. Edit Network settings > change all the parameters that you can, to match the requirement. My university tech support has a detailed document listing the options to choose, usually for windows 7, or even windows 8. get
as many of them as possible.
9) Finish. Move back to your netsh terminal
10) netsh wlan> show profile <profilename>
without quotes this time. This should show your previous attempt at creating a profile in the GUI dialog boxes. In my case, it had WPA2 and AES. It has to become WPA and TKIP. I also set my authMode to userOnly, since I hadn't done it right in the dialog box
before.
11) netsh wlan> set profileparameter
displays a humongous list of parameters with detailed options, just carefully examine the syntax. It's all here.
12) netsh wlan> set profileparameter name=<profilename> authentication=wpa encryption=tkip authMode=userOnly
13) netsh wlan> set profileparameter
Don't exit this yet.
14) Now click the connection icon, and connect to the network. It will ask you the username and password in a different style, that was my clue something was different this time.
15) It should connect. In my case atleast, it did. Verify by browsing.
16) netsh wlan> export profile name=<profile name>
In order that you're not put through this ordeal again, export the profile safely to a file. Again, the profile name in quotes.
17) Wonder why microsoft makes things difficult for us!

I am trying to find out if I can upgrade my old airport express from WEP to WPA2? If so, how do I do that?

I am trying to find out if my old Airport Express can be upgraded from WEP to WPA2? If so, does anyone know how to do this? I have a new PC for work reasons and I cannot get online with my WEP password. I realize now this is why my family and friends who bring PC's into the house cannot connect - I need WPA2 for PC, and besides, I should upgrade anyway as this is more secure than WEP. Thanks for any help!

Clone your system.
Install the 10.6.8 Java update.
Clone back from your clone you made before installing the update when finished.

WPA Security, Crashing OS, Locked out of Web-Based Setup Page. AAAaaarrrrrrgggg!

I tried several times to enable WPA security on my WMP54GS router by using the "Secure Easy Setup" button in the Wireless Network Monitor Panel. I pressed the lighted Cisco logo on the router as directed, I clicked on the "next" button on screen, and Windows crashed. (That is, my system rebooted and Windows reported that it had recovered from a serious error.) I am running XP. I also tried to enable security using the router’s web-based setup page. I followed the instructions, and a new web screen appeared stating "error on page." I tried again to enable security using the web-based setup page, but now it won't let me in using the default password (admin). I tried resetting the router by pressing the reset button for 30 seconds, but I still cannot access the web-based setup page. Sooooooo, I'm out of ideas. Can anyone help?
Thanks.

Hi
When configuring your wireless settings, use a wired computer and not a wireless computer. Because it will not be able to apply the new settings. Its like trying to troubleshoot a automobile malfunction while you are driving the car itself.
Just helping out...
"Success usually comes to those who are too busy looking for it"

Orignal Airport card with WPA security

I have two machines as follows:
iMac G5, OS 10.4.6 with Airport Extreme
iMac G4, OS 10.3.9 with original Airport card.
Airport Express connected to cable modem (firmware v6.2)
WEP 128 security.
When I originally set up my wireless network, the G4 would not connect with other than WEP security. There was nothing in the documentation that indicated that this would be a problem. Even the Apple Care guy was not aware of it. I don't remember how long ago this was.
Everything works great, but I'd like WPA security. Rather than "break" something that's working, I thought I ask this forum for some wisdom.
Has something been updated, either on the Mac side or the Express side to eliminate this "problem"?
Thanks for the help,
Bob
Flat panel G4 iMac, G5 iMac Mac OS X (10.4.6)

As long as you are using AirPort software version 3.3 or better you shouldn't have a problem connecting to a WPA network. See AirPort Card: When You Can Join a WPA Network.

WPA Security

My iMac will not connect to a wireless network with WPA security enabled - message 'Network requires a WPA password appears' but it will not accept the password . If I take off the WPA security, then it connects. I have tried this at two separate locations using two different routers (one Netgear, one Huweai). My old mac mini connects with no problem with security on as do two Windows laptops.
I have tried WPA personal and WPA2 personal but nothing works - still will not accept the password
I used the Apple transfer facility to transfer the data from my old mac mini to the iMac
Apple support little help - just suggested that check my internet connection
Mac OSX ver 10.6.7

When using WPA2-PSK have you tried selecting the AES option.
I've got a Netgear router and have that option selected rather than the TKIP choice.
I wonder whether it would be worth experimenting on changing the channel on the router. I've seen on here that it's helped some people with flaky wifi performance.
On the Netgear it might be an idea to back-up the settings before fiddling so that you can restore them if needs be.

WPA security on 10.3?

I heard you can set up and use WPA security on 10.3; I have it running on my iMac with 10.4 but the menu choices are not there on 10.3 (on myiBook). The help viewer leads to a page that says Mac has it but that's it for help
Any ideas on how to use it? It asks for a password but that case only covers WEP.

I think you mean AirPort Extreme and the answer is no. Macs with the original AirPort card can use WPA.
But you need a Mac with an AirPort Extreme card to use WPA2.

Setting WPA security on an Airport Extreme Card

Hi all I’m a newbie to the wonderful world of MACs having just purchased a dual 2.3 G5 incorporating an Airport Extreme card.
Now, in my simplistic world I figured that I could use the G5 connected to the internet via an ethernet router to act as a base station and allow 2 PC laptops to have wireless internet access too. Also, it would be good to allow these laptops to share the printer connected to the G5 and, absolutely ideally, share files too.
The internet sharing part of this all this works fine up to a point – that point being until I try to secure the wireless network! I’ve tried using the WEP solution (in both 64 and 128 bit modes) but the laptops just won’t connect, even though they can both actually see the network. I also understand that WPA is more secure than WEP anyway so I thought I might try that instead. Trouble is, I can't find where I can set this up for the AE Card.
So basically – could anyone tell me, in simple terms, whether I can use just an Airport Extreme CARD (rather than a full Base Station) to give me WPA security in the setup that I’m trying to create?
It seems that the card itself DOES support WPA if it’s connecting to an already-enabled network, but all I can find in the configuration options for the card is the WEP security (which I can’t get to work AT ALL!) I tried using the Airport Admin Utility to set WPA-Personal mode (which I understand is equivalent to WPA-PSK mode?) but that only seems to be for the Base Station.
I have spent the last 2 days trawling through as much information as I can find (including on these discussion pages) and still cannot find an answer.
If anyone’s still reading this rather long post and could offer any help at all, I’d be very grateful indeed.
Many thanks in advance,
Andy
PS I LOVE the MAC!!!

I need to set the network id to 10.10.1.1 will a new airport extreme do this?
Sorry, but no.
The AirPort can only be set to 10.0.x.x, 192.168.x.x or 172.16.x.x

WPA security changeover from WEP

Similar Messages

Maybe you are looking for