WPA with mac and pc

I just got the buffalo WHR-HP-G54 router, amd it is great, easy to install and set up plus works much better than my old Linksys with a stronger signal.
Is this normal..I set it up using Buffalo's client manager, encrypted with WPA, the desktop loads pages much faster than before but my iBook takes forever. Did I set up WPA incorrectly to cause this? Without any security it loads very quick.
Thanks,
Wendy

Yes, that seems to work OK. Time Warner is actually sending a tech out to check their modem this week, so I'll have them verify the equipment (& also ask him/her why the SB5100 shows up as a WAP). Could it simply be a failure of the WRT54GL's wireless transmission hardware? How could I tell if that were the case? Thanks for your feedback.

Similar Messages

Airport express with mac and windows

No problems at all with mac and airport express but I have a vaio with window xp sp2 and a pc with vista home premium and even if they connect to the wireless network they cannot receive an ip address. How can I solve this problem? ( As always, we have to waste a lot of time when we work with microsoft operating systems... ;-)) )
Thanks

Thank you for providing me with the exact model of your PowerBook. This model was available with either an optional or built-in AirPort Card. This card is only able to connect to 802.11b wireless networks with a maximum bandwidth of 11 Mbps. This card is also capable of connecting to wireless networks that use the TKIP encryption protocol. This protocol is used in either the WEP or WPA standard. The card is NOT capable of connecting to wireless networks that use the AES/CCMP encryption protocol that is part of the WPA2 standard.
However, some of the earliest versions of the AirPort Card did not work with WPA's TKIP implementation ... so it is possible that you may not be able to connect to an AirPort Express Base Station (AX) configured for "WPA/WPA2 Personal." It may also be problematic to connect to the same AX if it is configured to use one of the 802.11n modes that offer compatibility to 802.11b/g clients. This latter item does not sound like an issue as you are connecting, but wireless security does.
WEP introduces its own set of "problems." Not to mention, that is it completely un-secure. The following Apple Support article may be helpful in getting all of your wireless clients connected when using WEP: Joining an encrypted WEP or WPA Wi-Fi network

Since installing Mac Mavericks all my friends with Macs and I have problems with the cursor disappearing, only in Firefox, Safari is fine...

I have stopped using Firefox as nothing I have done has fixed this problem. I have tried shutting down Firefox and rebooting it, I cleared all my add-ons and then added adblock back (that's the only one) but it still doesn't work. I've deleted large files so that I have more space - I can't think of anything else that will work. I have spoken to four of my friends with Macs and they are all having the same problem with Firefox since Mavericks.

Hi thanks very much for your reply. I did a few things like delete my add-ons and I don't have the problem of the disappearing cursor (sounds like a Sherlock Holmes story) any more but it seems to have been a mac issue as there were many complaints on the Apple forums of the cursor disappearing since the Mavericks OS and not just in Firefox but in multiple programs. Looks like they've fixed it somehow!

Looking for an app that works with Mac and iPhone that will set calendar reminders of birthdays in contacts.

Looking for an app that works with Mac and iPhone that will set calendar reminders of birthdays in contacts.

Hi ron1098,
Try my application Dates to iCal. it runs on the Mac, but you can sync the calendar to your iOS device.
See more about Dates to iCal here. It is £4 shareware with a 2 week demo.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies. How do I reverse this?

Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies. How do I reverse this?

Paragraphs help the reader, just saying.
What are you actually trying to do? Why do you need "DVD size" folders if you're creatng an Archive on an external hard drive?
Also, I understand burning folders instead of individual photos or albums gives you more space on a DVD.
It makes no difference at all.
How can I keep the captions on my photos (not events) when I print or transfer to a new folder?
You can export while writing the metadata to the file in most cases.
Tne only way I know is to copy photos from the Windows to folders on my HD, then copy and paste photos or albums or events to HD, then create a new folder and fill it to the appropriate DVD size.
HD? Another HD? You use HD there in a way that makes no sense. What's the point of 'DVD size'?
I also thought I should download future photos to my Canon programming that comes with EOS cameras and edit and then decide which photos to save to iPhoto library and which to save only to my archival HD?
Does this have any relation to the previous questions? You know you can delete from iPhoto, right?
You're somewhat confused and you need to
1. Decide what exactly you want to do
2. Then go about it.
If I understand you correctly - and there's no guarantee that I do - the easiest thing is to bring all your Photos into iPhoto and do everything from there.
You can have an archive on an external disk, you can sort and select and edit with or via iPhoto
Regards
TD

External Hard Drive Compatible with Mac and Windows?

So my old laptop is a Dell Latitude and I bought a Western Digital external hard drive and put all my files/pics/music on it. The information the WD came with said its compatible with Mac and Windows, but when I plug it into my brand spankin new Macbook, it doesn't register with the computer and won't show up. What's going on?
Message was edited by: philliesphan

I recently ran into that problem. In order to have the hard drive compatible for both PC and Mac it must be in a FAT32 format. In order to do this though all your files will be deleted (in order to reformat). You can do this by plugging in the hard drive into you mac and going under disk utility and there you will find your hard drive and under erase change the format to FAT32 and then you press erase (all will be deleted off the external drive though)

How to format flash drive to be compatible with Mac and PC

Hey guys, I was stupid and formatted my 8G flash drive to a different format by accident. Not FAT32 which it was originally. It originally worked find with my Mac and PC. I can't get it back now. I went into Disk Utility and the only way I can format it back is to MS-DOS(FAT) and all the other Apple formats. When I erase it to MS-DOS(FAT) and plug it into my PC it comes up and wants to format it to a 200MB FAT32 patition?? How can I solve this? Thanks

Hi,
FAT32 (called MS-DOS in OSX Disk Utility) is the file system to use for compatibility with Mac and PC.
The "200MB partition" message you get also indicates that you changed the partition scheme on the flash drive to GPT (GUID Partition Table).
Use Disk Utility to verify this and if needed change the partition scheme back to MBR (Master Boot Record).
Regards
Stefan

Pls help me with Mac and had a trial serial number problems

Hi,
I downloaded first the trial version of Photoshop, after 30 days finished but the icon still remained.
Now, when purchased a creative suite 4 Designe premium, installed, all programs are fine, just the photoshop not working, asking for serial number but when I type the right numbers, doesn`t accept.
What can I do? any idea?
to uninstall the photoshop and install again?
but if I have the other programs working and installed?

Hi,thank you, that is fine, just not so quick but I resolved the problem alone.Thanks anyway you helped me.Eva
Date: Sat, 1 Aug 2009 11:53:58 -0600
From: [email protected]
To: [email protected]
Subject: Pls help me with Mac and had a trial serial number problems
Hello, Eva. For CS4 problems, you need to ask in the Photoshop forum (this is the Photoshop Elements forum). It's here:
http://forums.adobe.com/community/photoshop/photoshop_macintosh
Good luck!
>

How can I make an icon that links to a webpage that works with Mac and Windows??

Hi!
I burn CDs with my photos and send them to clients. Besides the photos folder, I would like to include a file (similar to the .webloc files on the Mac Desktop) that can be clicked and it will be linked to my website - it will open up a browser window and go to my website . Is it posssible to make one of these icons that works with both Macs and Windows machines? Thanks!

Now it works! Thanks, Denico!
The reason I saved to text: The first time I followed your instructions, it did not work. I tried to figure out what I did wrong and saw that you wrote to "save as plain text." I did not know what this means and there was no option available to save a plain text. So I looked around and saw "save as stationery" and I guessed that maybe that was what you meant. And after that, it worked! But the next thing you know, the icons started duplicating themselves.
I guess I had made a different mistake in the beginning and I fixed it without knowing what it is.
Thanks for clearing that up.
But just one question. WHY does saving as "stationery" make an icon duplicate itself?

External HDD to be shared with Mac and Windows XP

I wish to share an external HDD via firewire/USB between an ibook G4 on OSX 10.3.9 and Windows XP. Apart from using FAT32 and having partitions for each OS just in case can anyone share any risks considerations I need to be aware of? I intend on having a generic 320Gb Seagate drive installed into an aluminium box but for some reason Lacie seem to be particularly good with Mac's and I can't ascertain why.
ibook G4 Mac OS X (10.3.9) Acer Windows XP

There appears to be some misunderstanding about what systems can read or write what hard drives.
OS X can read and write HPS+ and FAT32 formatted drives, and can read, but not write to NTFS drives. Windows can read and write NTFS and FAT32 drives, and cannot read nor write HPS+ drives. Fresh out of the box the only read/write file sharing is via FAT32 drives.
There are reasonable methods for expanding this capability.
(1) Windows can be given the ability to read and write HPS+ drives by installing MacDrive 6 on the Windows machine. As far as I know there is no software available which gives OS X the ability to read and write NTFS drives - - maybe it exists or is under develpment somewhere.
(2) Both OSX and Windows can read/write files that are on a networked file server regardless of the file system used by that file server. The server hides its underlying file system from clients. Just connecting a network capable HDD to a router is NOT the same thing as having a file server on the network - - the same basic file limitations still exist.

Sharing Linksys Wireless Print Server with MAC and PC - How to do?

I have lost the capability to share a printer on my network by using the Linksys Wireless Print Server-model number WPS54G -V2. Prior to having to return my previous Print Server on an RMA, I was able to use the MAC and PCs on my network. I have a PowerGook G4 with MacOS X 10.4.10. I also have a Airport Extreme Base Station V5.6. The printer on the network that is being shared is an Epson Stylus Photo 820. Recently, when trying to reconfigure the network, I updated the software on the Airport Extreme...so I think after that, I am no longer able to share this printer using current network configuration. As information, I will share how I got the network to share the printer BEFORE I had to replace the previous Print Server and BEFORE I updated the Airport Extreme. Please see this link:
http://www.macosxhints.com/article.php?story=20050406151311940
Even though this was for a different type of Print Server, this worked for me.
When reconfiguring the new Print Server, I contacted Linksys...as had some difficulty until I found out how to assign a static IP to the new Print Server. When trying to talk to them about the Mac issue, and sharing the printer, they shared this link with me...which may be helpful to some, but I found that this does not work for me...
http://www.macosxhints.com/article.php?story=20060404021600193
I have been trying to work through the issue, but feel I may now have some compatibility issues between the Airport Extreme and the Epson printer.
Further details are that I use 10.0.1.78 for the assigned IP address for the Print server. My router (which is the Airport address) is 10.0.1.1. I have tried IPP printing option, LPD printing option...and IPP printing at least returns a status on the Print Server as "printing" as opposed to "idle". I have checked the Print status on the Mac, and I have received two (2) different error messages as to why the print job failed. They are:
"the process "picwpstops" stopped unexpectedly with status 1"
and
"the process "rastertoprinter" stopped unexpectedly with status 1"
The latter happens when I follow the instructions on the second link I attached on this topic...with the only change being that I select IPP printing as opposed to LPD printing.
Anyone that has any insight into HOW to configure the mysterious settings for Mac OS printing so that it can be compatible with a Wireless Print Server, please feel free to comment. In the meantime, I am thinking that the links above could help some people...just not me at this point given my current configuration and versions of software/firmware and perhaps the printer I am using.
Greatly appreciate your consideration, and any suggestions to anyone that might understand what these error messages mean when checking the printer status after sending a file for printing.
Thank you

1. No, you don't have to make a bootable clone.
2. If you use the drive for a bootable backup, then you cannot use the drive for other types of storage unless you partition the drive and make more than one volume.
3. No, it will not try to boot the computer. You must designate the startup volume using Startup Disk preferences.
If you wish to use the drive on both a Mac and a PC, then either you make two partitions - one for Mac and the other for the PC or you must format the entire drive using FAT32 so the drive can be used for read//write by both operating systems. If you do this then you cannot use the drive for a bootable backup nor can you use it with Time Machine.
FAT32 is slower for read/write on the Mac than using Mac formatting.
Optimally, I would suggest you partition the drive into two volumes. One volume formatted for the Mac and the other formatted FAT32.
You can send files from a PC to a Mac and vice-versa using File Sharing. Select Mac Help from the Finder's Help menu and search for "file sharing" or "sharing" to find help articles. Also see,
Mac OS X 10.5 Help- Setting up a Mac computer to share files with Windows users
Mac OS X 10.5 Help- Setting up a Windows computer to share files with Mac users
Mac OS X 10.5 Help- Sharing with Windows computers

How can I sync my Address Book and ICal with Mac and PC with Palm Desktop?

I now have the IPhone and I love it!!! But I have some issues and need help please. I have a PC at work and a Mac at home. In the PC I use the Palm Desktop Version 4.1.4 and I have there all my contacts (more than 1,100), all my date book (since 1998) and all my memos (about 600). I want to see what would be the best way get rid of my Palm Handheld and have only the IPhone, but I have encountered some problems and many steps. Everyday I have to sync the Palm Handheld at work, then sync the Palm Handheld at home with my Mac (using The Missing Sync, but it takes a long time every time), then sync the IPhone. Can you please help me??? How can I sync my data from my PC (Palm Desktop) with the IPhone? Another, thing; I do not want to use Outlook at work because the information that I want to sync (Palm) is my personal data and I want to keep using the Palm software for that.

aflores48,
Unfortunately, the iPhone is not designed to sync with Palm software. As stated in the minimum system requirements, the iPhone can sync with Outlook (2003, 2007 or Express) on a PC, or with iCal and Entourage on a Mac. If you do not want to use Outlook on the PC, you can sign up for a free Yahoo account and sync with Yahoo Address Book. Yahoo Address Book can be used to sync from PC or Mac. More information on the minimum system requirements for the iPhone can be found here:
http://docs.info.apple.com/article.html?artnum=305703
More information about syncing the iPhone with your computer (including Yahoo Address Book) can be found here:
http://docs.info.apple.com/article.html?artnum=305741
Hope this helps,
Jennifer B.
Message was edited by: Jennifer_B

Can anyone tell me if the Flip UltraHD Video Camera NEWEST MODEL is compatible with Macs and iMovie?

Does anyone know if the Cisco Flip UltraHD video camera can be used on a Mac and specifically with iMovie? I'm new to Mac and want to make certain before I purchase it or if there are any issues anyone has run into. Thanks!

http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
There are some Flip models on the supported list.

Can I use my Ipod 5th Genereration with Mac and XP at the same time?

I have a 5th generation. My home system is a Mac my work is an XP. I have all of my music on my home MAc. I want to bring those over and use in the XP environment. Does anyone know if that can be done? When I connected my ipod into the USB on my XP it asked for me to download the software. If I do that will it mess up my Mac interface?? Any help would be appreciated. Thanks!
ipod video (5th Generation) Mac OS X (10.4.6)

First, please understand that an iPod formatted on a PC (FAT32), will be able to be read by a PC and Mac. But not the other way round. You have 2 options to do it:-
1. Do a Restore of your iPod on your PC (you need to install the iTunes and iPod updates on your PC), (it will erase all data on your iPod). Once it has been completed, connect it with your Mac and do an update between the iTunes on your Mac with the iPod. After that please install the 3rd party software e.g. YamiPod on you PC, and use this software
http://discussions.apple.com/thread.jspa?threadID=464031&tstart=0
Copy all the music on your iPod to your iTunes on your PC
2. Download and install a 3rd party software xplay2
(which is not free)on your PC, then it will manage to read your Mac's iPod
http://www.mediafour.com/

Sync with Mac and Windows issue

I bought my wife an iPod (our first). I use a MacBook Pro and she uses a Windows desktop. I copied all of my iTunes music onto the new iPod for her from my Mac. I downloaded iTunes to her Windows machine and tried to sync with it, but it says the iPod must be reformatted for Windows and that will wipe out all of her music files. Is there a way that I can copy the music files to the Windows machine so that she doesn't have to use my computer to sync? These are not protected files. All were copied from our CDs.

OK first thing to know is that Windows machines can not (without $$$ software) read Mac formatted iPod. However Macs can read and use Windows formatted iPods just fine. So go ahead and format the iPod on the windows machine.
Next, you will want to transfer your library from the Mac to the Windows machine. If your library is smaller than the total capacity of the iPod, then you can plug the iPod into her Windows machine and then configure it (a checkbox) to enable disk mode. Eject the iPod and plug into the Mac. The iPod should show up in the Mac's iTunes, but also on the desk top as a disk drive.
At this point it is a simple matter to copy the iTunes folder from the Mac onto the iPod. Eject the iPod, then plug it back into the Windows machine, and copy the stuff off the iPod (as a disk drive) to the Windows hard drive.
Further help on the subject...
Migrate Your iTunes Library from Windows to Mac (and keep your ratings, play counts and date added)
http://www.tunequest.org/migrating-your-itunes-library-from-windows-to-mac/20061 105/
A Guide to Switching iTunes from Mac to Windows (or Vice Versa)
http://ipod.about.com/b/2007/03/11/a-guide-to-switching-itunes-from-mac-to-windo ws-or-vice-versa.htm
Geek to Live: How to move an iTunes library from a PC to Mac (and back)
http://lifehacker.com/software/itunes/geek-to-live--how-to-move-an-itunes-librar y-from-a-pc-to-mac-and-back-242468.php
HOWTO: Move your iTunes music while preserving library data (when you don’t let iTunes manage your music library)
http://hifiblog.com/past/2006/05/11/howto-move-your-itunes-music-while-preservin g-library-data-when-you-dont-let-itunes-manage-your-music-library/
Cheers,
Patrick

WPA with mac and pc

Similar Messages

Maybe you are looking for