WPA2 on 1220-B with MS IAS (2003 server)

All -
I have a Win2003 server running IAS. I have a 1220-B AP running 12.3(8)JA2.
I am trying to create two VLANs/SSIDs; one for guest mode - fully open without encryption, and one for secure mode WPA2.
The two segments will be firewalled using an ASA-5510.
I have followed the guidelines provided in the WPA2 sample configuration (though AES is not available to me in the encryption Cipher settings - only TKIP), and the using VLANs on wireless access points.
However - the clients (Intel Pro Set 3945 ABG running 10.1.0.3 client) are not able to associate to the secured segment as expected - even when using the AP's local radius server (to eliminate IAS as a source of problems).
Anyone have any suggestions - or known working configs they would care to share?

Scott -
The radio units for use in production include the G radio module. The test environment does not (my bad!). I'll have to see about taking one of the upgraded units out of production to further test WPA2. This concerns me though because we have a cache of 350 PCMCIA adapters - and this suggests that they will never be able to do WPA2 because they cannot associate as G devices. I've got to come up with a workable solution for basic B devices (both Cisco and non) and our newer A/B/G devices.
I've used both the ProSet Utilities and WZC to attempt this on the test environment laptop.
Authentication will be testing/proven in two sequences.
The first sequence for authentication will be against the AP's local user database using LEAP.
The second sequence (and ultimately final) will require authentication against the Win2003 IAS AD domain due to multiple APs in the production environment, likely using PEAP.
If I can successfully go directly to the second sequence, that would be nice, but I'm concerned about the simplicity of troubleshooting - in the event something is wrong with the IAS configuration.
For the record, I'm a router/switch head - with only moderate skills with wireless, and virtually no experience with Win 2003 Server. I may need some hand-holding .

Similar Messages

IIS Conflict with in Windows 2003 Server

Hai all,
When I am trying to install VC 6.0 in Windows Server 2003,It is giving an error, asking me to get the latest version of IIS.The system is already having IIS 6.0 as a package coming with Windows Server 2003 CD.I am note able to degrade the Version of IIS 6.0 to IIS 5.0(as mentioned in Installation Guideline).
Anybody plz give me a solution for this.Is it possible to install IIS 5.0 in windows 2003 server.What else I can do ?

I believe the note is quite clear (https://notescsn.wdf.sap.corp/~form/handler?_APP=01100107900000000342&_EVENT=DISPL_TXT&_NNUM=0000804496). If you ahve any specific questions on it let me know.

Mac 7500 working with a Windows 2003 server?

Hi all and thanks in advance for any help
We have an ancient mac 7500 that is dedicated to running an old version of DNA sequence analysis software (MacVector 6).
It is networked in our LAN, and there is a common drive on the server, which is on a Dell running Windows 2003 (yes, I live in a PC world...)
So, we can see the server, but when we try to do anything to the disk, it shows that priviledges are only read (not read write)
Our net admin folks swear that they have opened priviledges, and I can certainly read/write from my G4 and my PwerBook running OS 10.
We upgraded the 7500 to run OS 9.2 to try to make it as compatible as possible, but no luck.
Any suggestions on how to "unlock" the server drive to read/write?
You can send email to [email protected]
Thanks!
Mac 7500 Mac OS 9.2.x Windows 2003 network server

Unless you have added some additional software, the two systems you mention do not appear to have a protocol in common -- the Windows machine wants to talk SMB protocol, the Mac wants to talk AFP.
Maybe this article will have more insights:
31318- Mac OS 8, Mac OS 9: Sharing Files With Windows-Based Computers

Pix 6.3 VPN auth to IAS 2003, Fails?

Hi
I've got a pix501 runing 6.3 software and an Windows Server 2003 running Active Directory and IAS for my RADIUS service. I've configured many Windows 2000/Pix RADIUS setups in the past and have had no real problems, yet I have yet to be able to get a working Server2003/Pix setup working. Is there something fundamentally different between IAS 2000 and IAS 2003? Here is my pix config;
aaa-server RADIUS (inside) host 192.168.102.7 105vankirkanx_ timeout 10
crypto ipsec transform-set myset esp-des esp-md5-hmac
crypto dynamic-map dynmap 10 set transform-set myset
crypto map mymap2 20 ipsec-isakmp dynamic dynmap
crypto map mymap2 client authentication RADIUS
crypto map mymap2 interface outside-internet
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption des
isakmp policy 10 hash md5
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
vpngroup butchervpn address-pool ippool
vpngroup butchervpn dns-server 200.1.0.2
vpngroup butchervpn wins-server 200.1.0.2
vpngroup butchervpn default-domain lauzon
vpngroup butchervpn split-tunnel 101
vpngroup butchervpn idle-time 86400
vpngroup butchervpn password ********
And for the IAS 2003 side of things, I've followed this guide;
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00800b6099.shtml
I know the VPN works because I can switch the auth to LOCAL and VPN in fine with local users. This is the same pix code/setup I've used on IAS 2000 servers and it has always worked fine. Can anyone provide any help with this? Thanks
Jason

I am not sure if this is related but I've run into an issue recently where I had a VPN solution working through an ASA 5510 w/RADIUS using an IAS 2003 server. The box IAS was running on was 2003 server SP1. As soon as the customer upgraded to SP2, the integration stopped working. From looking at the logs, the IAS service seems to be fine, it is logging successful authentications. However, the client software just times out after the user submits their active directory username and password.
I've got a TAC case open, and I hope to get some answers today.

Is WebI 2.7.5 compatible with Windows 2003 Server?

Currently have WebI 2.7.5 installed on a Windows 2000 Server and working fine.
Is WebI 2.7.5 compatible with a Windows 2003 Server?
Thank you.

Hi Craig,
- Not supported means that particular version of Operating System is officially not tested (Product Group has not tested any report with that version) i.e. it may or may not work at users end.
- If it woks at your end and you will get some issues (like error message or other server related issues) then BO support will not able to assist you as the version of OS which you are using is not officially tested at BOu2019s end.
Regards,
Deepti Bajpai

OSX 10.9 compatibility with Windows Small Business Server 2011?

Hi
I'm hoping someone here may be able to help me as our external server guys have been particularly unhelpful!
I'm the only Mac on a Windows server, which has recently been upgraded (??) to Windows Small Business Server 2011. I've recenty upgraded the work iMac to 10.9, but ever since the server change, I'm having intermittent dificulties saving files. Often, I get and error saying the file cannot be saved as I don't have permission to access the folder - which then worryingly REMOVES the file I'm trying to overwrite WITHOUT WARNING.
If I'm using Photoshop save for web, I get errors when clicking 'Save' to say that it can't, but does save the file, plus a second with a gibberish file name.
Most worryingly though, is that now on two occasions caused the iMac to crash and shutdown immediately, which is not good at all. Once was moving a file to overwrite another in the Finder, the second (today) was saving from Illustrator.
I'd noticed weird things with our old 2003 server before the switch and when I was still on 10.6 - mainly that my iMac was slow when connected (Adobe apps etc opened in a flash when unconnected, but took minutes when plugged in), but now I'm on 10.9 and the new server installed, these saving issues have arisen. (I ended up wiping the Mac and completely reinstalling everything to cure that slowness issue - never did find out what it was!).
The server guys are adamant that this has nothing to do with the server, and is all linked to my iMac - personally I'm not so sure, but I'm asking here to see if anyone else has had issues? It seems like some kind of permission problem? Do I need any special network settings for it to play nicely with the Windows server? My internet, email all goes through it, and I use it to store my work, but I'm not linked to any other server software in any way.
If anyone may have any clues to help I'd be really grateful!
Many thanks!
Ben

Thanks for the response - this is why I'm asking though- I can't see anything on the iMac which would be causing this, and saving files to a folder on a server is a pretty basic fuction, and I can't risk the crashes. I don't see how the iMac connection would be causing this, or for the files to 'vanish' but if it is the iMac settings I'll need to find a fix. Every one else is okay, but I'm the only one using this software and filetypes. Surely the Windows software would have some kind of instructions for connecting Macs?
I was hoping someone may have experience and if any additional network settings might be needed. I will check with Apple support also to see if they have any info, but thought I may get a good response here.
What I meant by the "server guys" is that's it's an external company we pay to look after it - so I'd hoped they might have at least looked into it for me, but it's a brick wall "We don't support Macs" response... which is why I think it's unhelpful - even though they supplied the software knowing it needs to have multiplatform support...
It's really frustrating.
And I hope nobody does insist I use Windows... please... I'd have to leave....
EDIT - "We"?? - Do you work for them!?

Need sap 4.7 ides installation guide on win 2000 and 2003 server. NO COPY..

Hi Gurus,
I am lookign for SAP 4.7 installtion guide with 2000 and 2003 server can any one help me to get the same please...
NO SAP COPY RIGHTED MATERIAL PLEASE ......
please email the same : [email protected]
with regards

Hi Hari,
Please can you send me the installation guide of IDES on Windows 2003 Server.
My email is [email protected]
Thanx
SALEH.

Windows 2003 Server Service Pack 2 for product version 4.0.1.0.03

Hi Experts,
A customer wants to know if there Are any known issues with applying Windows 2003 Server Service Pack 2 for product version 4.0.1.0.03 .
i gave him the answer that SP2 is not tested for that version hence it is not supprted. So he now asks me if Windows 2003 Server Service Pack 1 is supported for 4.0.1.0.03 , Any input would be of great help.

Hi,
Be careful when you say SP2 is not supported.
Hyperion s policy in terms of third party products was the following (I would imagine this should remain the same with Oracle, however you may want to check with your local support team):
Hyperion products are tested against the versions specified in the product matrices. They do not actively look for issues in maintenance releases or service pack upgrades from 3rd party vendors for obvious reasons (there would be far too many). They will investigate any maintenance release or service pack upgrades as long as the vendor confirms backward compatibility.
Therefore SP2 would be supported with 4.0.1 and Hyperion/Oracle should investigate any issues you may encounter.
However keep in mind that if a specific issue you have encountered in 4.0.1 is caused by SP2 but fixed in a later version then Oracle's recommendation will be to upgrade.
So its a catch 22 situation really.
Personally I would take this opportunity to recommend an upgrade to 9.3.1 ;-)
Hope this helps.
Seb

IAS 2003 and ASA5510

We are using ASA5510 as our VPN gateway and MS IAS 2003 for RADIUS & AAA. Using Cisco VPN client it is not able to authnticate. I get the following error in Event Viewer:
Policy-Name = Dialup Group
Authentication-Type = PAP
EAP-Type = <undetermined>
Reason-Code = 66
Reason = The user attempted to use an authentication method that is not enabled on the matching remote access policy.

I just dealt with this. Go into your IAS console and select properties for your remote access policy 'Dialup Group.' Click ;Edit Profile' and then the 'Authentication' tab. Enable 'PAP'. That should do it!

Authentication with Windows 2003 server

Hi there,
I am looking for achieve this task. I would like to know How I could authenticate users accesing by my wireless network? I mean in windows 2003 server. They must type their username and password. I want to restricted users which are not on the list to access by my wireless network. I know that in windows 2000 I could use radius server. Could I use it here?.
Also, I guess that I have to allow these "new users" in AD.
I am looking forward to read helpfull information here and of course I will give it a rate (points)
Any ideas are welcome.
Thanks
Wladimir

Same thing for 2003, it is called IAS (Internet Authentication Service).
http://www.microsoft.com/technet/network/ias/default.mspx
Basically you will set up IAS with a RADIUS Client which would be your wireless access point(s). Then you will set up a remote access policy which will define how connections are authorized or rejected (windows groups, protocols etc.). Don't forget to register IAS with active directory.

Windows 2008 R2 SP1 (64bit) shared folders no longer work with Windows 7 Pro but do work with WindowsXP & Windows 2003

As of last week, our Windows 7 Pro workstations can not map or browse the Windows 2008 Server shares. They can ping the Windows 2008 server. The Windows 7 Pro machines can still access the Windows 2003 Server Shares. The older workstations running Windows
XP can still map to the both the Windows 2003 & Windows 2008 Servers. All the servers can browse to each others shared folders (2 windows 2003 server & 1 windows 2008 server).

Ok, now you're down to network or permissions issues. An unedited ipconfig /all
of server and problem workstation may help. You could also try setting up some auditing.
https://technet.microsoft.com/en-us/library/dn311489.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Best Practices when replacing 2003 server R2 with a new domainname and server 2012 r2 on same lan network

I have a small office (10 computers with five users) that have a Windows 2003 server that has a corrupted AD. Their 2003 server R2 is essentially a file server and provides authentication. They purchased a new Dell 2012 R2 server.
It seems easier to me to just create a new domain (using their public domain name).
But I need as little office downtime. as possible . Therefore I would like to promote this server to its new domain on the same lan as the current domain server. I plan to manually replicate the users and folder permissions. Once done, I plan to
remove the old server from the network and join the office computers to the new domain.
They also they are also running a legacy application that will require some tweaking by another tech. I have been hoping to prep the new domain prior to new legacy tech arriving. That is why I would like both domain to co-exist temporarily. I have read
that the major issues involved in this kind of temporary configuration will then be related to setting up dns. They are using the firewall to provide dhcp.
Are there any best practices documents for this situation?
Or is there a better or simpler strategy?
Gary Metz

I followed below two links. I think it should be the same even though the links are 2008 R2 migration steps.
http://kpytko.pl/active-directory-domain-services/adding-first-windows-server-2008-r2-domain-controller-within-windows-2003-network/
http://blog.zwiegnet.com/windows-server/migrate-server-2003-to-2008r2-active-directory-and-fsmo-roles/
Hope this help!

Problem with execution of a forms in Intranet (IAS oracle Server)

Hi every body!!!!
I have a serious problem, that i could not resolve for more than a week, it's awfull!!!
my problem is that i have compiled certains forms V6 in IAS oracle server with using the command f60gen, when i call certain of my forms from a menu in intranet, they could not be executed, even if every things is compiled correctly!!!
Just a precision: the forms that i wanted to excute, calls another forms at the end of the trigger "when-New-Form-instance"
another thing: i have released that only the forms that call other forms, that could not be called from my menu, all other simple forms are accessed correctly!!
Can some help me please!!!!!!
thank you so much for your help,
Reda

Thank you for your answer, but i will explain much more my problem:
From my intranet, I have a menu in which a call my forms, and there are two possibilities:
The first: there is a direct call to a Form in this case it is okay.
The second case: there is a call to a Form A that will call a Form B.
in the form A: there are just some initialisations to global variables and at the end there is a call to A form B in the trigger 'when-new-instance'
I deployed theses forms in two machines, it worked in one machine, but didn't work in the second machine, so i compared the configuration of the two machines but i didn't find any difference!
Just a precision: I have deployed Forms version 6, because i have upgraded them from the version 3.5 to 6 and the old versions work fine in the two machines.
Thank you very much for any suggestions

SAP R/3 4.6C with Oracle 9.2 on Windows 2003-Server

Hi,
I need to find out whether it's possible to install SAP R/3 4.6C
with Oracle 9.2 on a Windows 2003 - Server.
Is is only possible to install this sap-system with Oracle 8.1.7 on a Windows 2000-Server? Or are there some other ways?
If no, please tell me the possibilities for the correct installation of the desired sap-system.
Awaiting for your feedback.
Kind Regards

->SAP R/3 4.6C with Oracle 9.2 on Windows 2003-Server
GreetZ, AH

How to install 11.5.10 on VMWare with Windows 2003 Server?

Need help on installing 11.5.10 on VMWare which runs Windows 2003 Server.
I've XP Pro laptop with 2GB RAM and 80GB HDD and external HD with 250GB. Gathered all required s/w for installation.
The Win 2003 Server VMWare is sitting on the external HD. I want to install pre-req s/w along with 11.5.10 on the VMWare.
(1) How do I make the laptop's CD drive and HD visible to the VMWare?
(2) Can I use the XP laptop HD as staging area and install on VMWare on external HD?
(3) What are the disadvantages/risks of using the external HD for both staging and actual installation?
Any help is appreciated.
FYI - we already have an Oralce 11.5.9 on VMWare. All services are up and running. Able to logon to SQL*Plus and EBS home page. The issue is, we are not able to connect to this Oralce VMWare image from other VMWare image(Siebel), ie, if we do a telnet to oracle vmware image connection establishes and closes immediately. No clue on why this is happening. But this is not happening when we did telnet from a vmware image(plain win 2003 server) that does not have Siebel. All vmware images work fine individually.
Any inputs?
Thx,
Jags

Need help on installing 11.5.10 on VMWare which runs Windows 2003 Server.
I've XP Pro laptop with 2GB RAM and 80GB HDD and external HD with 250GB. Gathered all required s/w for installation.
The Win 2003 Server VMWare is sitting on the external HD. I want to install pre-req s/w along with 11.5.10 on the VMWare.
(1) How do I make the laptop's CD drive and HD visible to the VMWare?
(2) Can I use the XP laptop HD as staging area and install on VMWare on external HD?
(3) What are the disadvantages/risks of using the external HD for both staging and actual installation?
Any help is appreciated.
FYI - we already have an Oralce 11.5.9 on VMWare. All services are up and running. Able to logon to SQL*Plus and EBS home page. The issue is, we are not able to connect to this Oralce VMWare image from other VMWare image(Siebel), ie, if we do a telnet to oracle vmware image connection establishes and closes immediately. No clue on why this is happening. But this is not happening when we did telnet from a vmware image(plain win 2003 server) that does not have Siebel. All vmware images work fine individually.
Any inputs?
Thx,
Jags

WPA2 on 1220-B with MS IAS (2003 server)

Similar Messages

Maybe you are looking for