WPAD file using DHCP

We would like to push out the proxy setting using DHCP and a wpad.dat file.
I have created a wpad.dat file that is hosted on a web server in the main office. If I setup option 252 on the dhcp server and point it to the webserver
http://test/wpad.dat the head office can connect to the internet using that file. If I setup my branch offices dhcp server to use that same file that is hosted at the main office it says page cannot be displayed. Everything
is the wpad.dat file is correct to say if your in this ip range and trying to go to the internet sites use proxy server.
On all branch office systems, if I open up IE and go to
http://test/wpad.dat they are able to download the file. What would be causing the branch office to not be able to get on the internet using the wpad.dat file? THe IE automatic detect setting Is checked off in all IE browsers so that is not the issue.
Also when using the wpad.dat file using dhcp from any system, does it copy the wpad.dat file to the local pc or does it send each request where the file is hosted and then that server pushes request to the proxy server?

Hi,
It almost sounds like the branch office clients are getting the file, but they are not allowed to use the proxy server in the file? If you configure the client manually to use the Proxy in the wpad file, does it work then?
I am also guessing that you mean that the IE automatic detect setting is checked and not off. :)
The WPAD settings is cached in ie as you can see in this article.
http://support.microsoft.com/kb/271361/sv
/Johan
Microsoft Certified Trainer
MCSE: Desktop, Server, Private Cloud, Messaging
Blog: http://365lab.net

Similar Messages

  • Lync Phone Edition and wpad.dat - using proxy for firmware updates

    Our Lync Phone Edition devices seem determined to use our proxy server for firmware updates, even though the server is directly accessible.
    Has anyone else experienced this?  Is there a workaround?  
    The phones are learning of the wpad.dat file via DHCP 252.  The wpad file has several rules that should be causing a bypass but none is taking effect.   The proxy is dropping the traffic because it doesn't match a rule.
    0:59:53.632.540 : [CPU 0] Raw data 208 (wchar), UCD_LOG_INFO: 08/04/2014|10:17:13 UCDAPI: PerformImageUpdateThread started with lpThreadParm(0x1938c00)
    0:59:53.688.396 : [CPU 0] Raw data 1246 (wchar), UCD_LOG_INFO: 08/04/2014|10:17:13 UCDAPI: XMLRequest To OCS = <Request><DeviceType>UCPhone</DeviceType><MacAddress>00-04-F2-9E-8F-F4</MacAddress><SerialNumber>0004f29e8ff4</SerialNumber><IP>10.124.1.41</IP><UserID>[email protected]</UserID><NumOf 0:59:53.688.638 : [CPU 0] Raw data 174 (wchar), UCD_LOG_VERBOSE: 08/04/2014|10:17:13 UCDAPI: UCDHTTPTransport::CloseConnections called
    0:59:53.731.587 : [CPU 0] Raw data 444 (wchar), UCD_LOG_INFO: 08/04/2014|10:17:13 UCDAPI: UCDAutoproxyGetProxyInfo: https://xyz-lyncfe-02.xyz.net/RequestHandler/ucdevice.upx can be reached through one of these proxies: 192.168.127.201:8080 192.168.127.202:8080
    --:--:--.---.--- : [CPU 0] ====================== Data loss counter: 0 bytes lost ======================
    0:59:53.983.597 : [CPU 0] Raw data 174 (wchar), UCD_LOG_VERBOSE: 08/04/2014|10:17:13 UCDAPI: UCDHTTPTransport::CloseConnections called
    0:59:53.985.010 : [CPU 0] Raw data 1494 (wchar), UCD_LOG_INFO: 08/04/2014|10:17:13 UCDAPI: OCS Response = <?xml version="1.0" ?><Response><NumOfFiles>1</NumOfFiles><CurrentTime>2014-08-04T13:17:13</CurrentTime><Update><FileName>CPE.nbt</FileName>
    <SignatureFileName>CPE.cat</SignatureFileName>
    <DescriptFi 0:59:53.991.169 : [CPU 0] Raw data 170 (wchar), UCD_LOG_INFO: 08/04/2014|10:17:13 UCDAPI: SetLanguageList called with langlist (ENU)
    0:59:53.996.727 : [CPU 0] Raw data 1394 (wchar), UCD_LOG_INFO: 08/04/2014|10:17:13 UCDAPI: Selected download string =
    FileName = CPE.nbt
    SigFile = CPE.cat
    BaseURL = http://xyz-lyncfe-02.xyz.net/RequestHandler/Files/UCPhone/POLYCOM/CX600/Rev-5/ENU/4.0.7577.4444/CPE
    RelURL = /RequestHandler/Fil 0:59:54.002.158 : [CPU 0] Raw data 146 (wchar), UCD_LOG_INFO: 08/04/2014|10:17:13 UCDAPI: CallDiskCleanUpCallback called
    0:59:54.002.460 : [CPU 0] Raw data 137 (char), UCD_LOG_VERBOSE: 08/04/2014|10:17:13 Aries: 08/04/2014|10:17:13.685 5540002:4390672 TRACE :: CImageUpdate::UpdateStartedCallback: Enter

    I do not have those options set in DHCP because we do not use these as PIN-authenticated phones.  The phone is registering fine and is learning the correct URL:
    BaseURL = http://xyz-lyncfe-02.xyz.net/RequestHandler/Files/UCPhone/POLYCOM/CX600/Rev-5/ENU/4.0.7577.4444/CPE
    Are you saying that the phone will bypass the proxy if it learns the server name via DHCP but it will use the proxy (and ignore the local names list in wpad.dat) if it learns the name via DNS-based discovery and SIP registration?

  • Use dhcp to point to tfpt server

    Is anyone using the OS X server dhcp to point to a tftp server. I have been using the osx DHCP and it is working ok for the 'normal' computer network. I am adding IP telephony and I want to continue using the OS X DHCP if possible. From what I understand, when the IP phone connect to the DHCP server, they can be given the address information to the tftp server to download configuration files.
    So the question is as stated... has anyone done this? or does anyone have a recommendation.
    Ted

    It is possible to do - you need to add the specific option numbers that the phone needs.
    You have to get under the hood to do this, though - you can't do it through the GUI.
    You need to edit /etc/bootpd.plist to add the options.
    As man bootpd states:
    DHCP options may also be specified using the naming convention:
    dhcpoption_optioncode
    replacing option_code with a numeric value in the range of 1 through 254. For example, to
    specify option code 128, specify a property named dhcpoption128.
    So, for example, if your phones use DHCP Option 150 for the TFTP server address, you'd add something like:
    <pre class=command><key>dhcpoption150</key>
    <string>192.168.2.3</string></pre>
    Which adds DHCP Option 150 (tftp server) to the DHCP configuration that hands out the address 192.168.2.3.

  • [Solved] Although I'm using DHCP I want fixed DNS

    I'm using a wired internet connection (eth0) configured as dhcp and this works fine.
    However, I don't want dhcp to choose my DNS servers.
    In other distros, I can get around this by adding my preferred DNS addresses as prepends in the /etc/dhcp3/dhclient.conf file (or it may be /etc/dhclient.conf).
    However, I can't find anything equivalent here in ArchLinux.
    Can somebody please advise me how to do this.
    Thanks
    Paul
    Last edited by paulfxh (2008-03-13 20:20:44)

    If you use DHCP and you don't want your DNS servers to change every time you start your network, add the "-R" option to DHCPCD_ARGS in /etc/conf.d/dhcpcd (used by /etc/rc.d/network). This prevents DHCP from rewriting your /etc/resolv.conf every time:
    DHCPCD_ARGS="-R -t 30 -h $HOSTNAME"
    From http://wiki.archlinux.org/index.php/Configuring_network

  • Attaching text file using SO_NEW_DOCUMENT_ATT_SEND_API1

    hello guys, i'm a newbie here.
    I'm having trouble attaching an existing text file using function 'SO_NEW_DOCUMENT_ATT_SEND_API1'. It seems i can't find the right combination of parameters that are being passed to this function.
    first, i'm using WS_UPLOAD to upload the text file to an internal table then i'm creating all the neccessary internal tables that will be use by this function..
    By the way, i'm trying to send mail w/ attachments to external mail and SAPids. Below is my code.
    REPORT ZHR_TESTEMAIL .
    TABLES: USR02, PA0105, SOSU, SOUC, RLGRAP, IBIPPARMS, DYNPREAD, RSCSEL.
    DATA: FOLD_YR(2) TYPE C,
          FOLD_TYPE(3) TYPE C,
          G_HEADER LIKE SOOD2,
          G_FOLMAM LIKE SOFM2,
          METHOD1 LIKE SY-UCOMM,
          G_DOCUMENT LIKE SOOD4,
          G_USER LIKE SOUDNAMEI1,
          FOLD_NUMBER(12) TYPE C,
          G_NEW_PARENT LIKE SOODK,
          G_OWNER LIKE SOUD-USRNAM,
          G_REF_DOCUMENT LIKE SOOD4,
          G_USER_DATA LIKE SOUDATAI1,
          G_AUTHORITY LIKE SOFA-USRACC,
          G_OBJCNT LIKE SOLI OCCURS 0 WITH HEADER LINE,
          G_OBJHEAD LIKE SOLI OCCURS 0 WITH HEADER LINE,
          G_OBJPARA LIKE SELC OCCURS 0 WITH HEADER LINE,
          G_OBJPARB LIKE SOOP1 OCCURS 0 WITH HEADER LINE,
          G_RECIPIENTS LIKE SOOS1 OCCURS 0 WITH HEADER LINE,
          G_REFERENCES LIKE SOXRL OCCURS 0 WITH HEADER LINE,
          G_ATTACHMENTS LIKE SOOD5 OCCURS 0 WITH HEADER LINE.
    DATA: BEGIN OF G_FILES OCCURS 10 ,
          TEXT(4096) TYPE C,
          END OF G_FILES.
    DATA: BEGIN OF IT_WS_FILE OCCURS 0,
          WS_FILE LIKE RLGRAP-FILENAME,
          END OF IT_WS_FILE.
    DATA: BEGIN OF IT_SAPID OCCURS 0,
          SAPID LIKE USR02-BNAME,
          END OF IT_SAPID.
    DATA: BEGIN OF IT_EMAIL OCCURS 0,
          EMAILADD LIKE PA0105-USRID_LONG,
          END OF IT_EMAIL.
    DATA: BEGIN OF IT_TSP01 OCCURS 0.
            INCLUDE STRUCTURE TSP01.
    DATA: END OF IT_TSP01.
    DATA: BEGIN OF TAB2 OCCURS 50,
          TEXT(200) TYPE C,
          END OF TAB2.
    DATA: V_DOCDATA TYPE SODOCCHGI1,
          V_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
          V_OBJHEAD LIKE SOLISTI1   OCCURS 0 WITH HEADER LINE,
          V_OBJTXT  LIKE SOLISTI1   OCCURS 0 WITH HEADER LINE,
          V_OBJBIN  LIKE SOLISTI1   OCCURS 0 WITH HEADER LINE,
          V_OBJHEX  LIKE SOLIX      OCCURS 0 WITH HEADER LINE,
          IT_RECVRS TYPE SOMLRECI1  OCCURS 0 WITH HEADER LINE,
          IT_CONTNT TYPE SOLISTI1   OCCURS 0 WITH HEADER LINE,
          IT_BODY   LIKE SOLISTI1   OCCURS 10 WITH HEADER LINE,
          V_TLIN    TYPE I,
          V_LINE    TYPE I.
    DATA: BEGIN OF IT_TEXTLINE OCCURS 500,
          TEXTLINE(5000),
          END OF IT_TEXTLINE.
    DATA: FYL LIKE RLGRAP-FILENAME,
          GV_SUBNO LIKE SOSU-SUBNO,
          GV_EMAIL LIKE PA0105-USRID_LONG,
          GV_NEXTDAY LIKE SY-DATUM,
          YEAR(4) TYPE C,
          RECFLAG TYPE C.
    SELECTION-SCREEN BEGIN OF BLOCK PARAM WITH FRAME TITLE TEXT-001.
    PARAMETERS: SUBJ(254) TYPE C OBLIGATORY,            "Subject
                DESC(254) TYPE C.                       "Message
    SELECT-OPTIONS: SAPID FOR USR02-BNAME NO INTERVALS. "Recipient's SAP ID
    SELECT-OPTIONS: EMAILADD FOR PA0105-USRID_LONG NO INTERVALS.
    SELECTION-SCREEN END OF BLOCK PARAM.
    SELECTION-SCREEN BEGIN OF BLOCK PARAM2 WITH FRAME TITLE TEXT-002.
    SELECT-OPTIONS: WS_FILE FOR DYNPREAD-FIELDNAME NO INTERVALS.
    SELECTION-SCREEN END OF BLOCK PARAM2.
    SELECTION-SCREEN BEGIN OF BLOCK PARAM3 WITH FRAME TITLE TEXT-003.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS: RBUT1 RADIOBUTTON GROUP A USER-COMMAND BUT. "Local PC
    SELECTION-SCREEN COMMENT 5(20) FOR FIELD RBUT1.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS: RBUT2 RADIOBUTTON GROUP A.                  "Server
    SELECTION-SCREEN COMMENT 5(20) FOR FIELD RBUT2.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS: RBUT3 RADIOBUTTON GROUP A.                  "Spool
    SELECTION-SCREEN COMMENT 5(20) FOR FIELD RBUT3.
    PARAMETERS: SPOOLNUM LIKE RSPOTYPE-RQNUMBER.            "Spool Number
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK PARAM3.
    SELECTION-SCREEN BEGIN OF BLOCK PROC WITH FRAME TITLE TEXT-004.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETER: BPROC AS CHECKBOX USER-COMMAND BCK. "Background Processing
    SELECTION-SCREEN COMMENT 5(50) FOR FIELD BPROC.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK PROC.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR WS_FILE-LOW.
      DATA: WS_FILE_TEMP TYPE IBIPPARMS-PATH.
      CLEAR: WS_FILE_TEMP.
      CALL FUNCTION 'F4_FILENAME'
           EXPORTING
                PROGRAM_NAME  = SY-REPID
                DYNPRO_NUMBER = SY-DYNNR
                FIELD_NAME    = 'WS_FILE'
           IMPORTING
                FILE_NAME     = WS_FILE_TEMP.
      WS_FILE-LOW = WS_FILE_TEMP.
    AT SELECTION-SCREEN.
      SELECT SAPNAM FROM SOUC
          INTO TABLE IT_SAPID
          WHERE SAPNAM IN SAPID
            AND DELETED = ''.
      GV_NEXTDAY = SY-DATUM + 1.
      LOOP AT EMAILADD.
        IT_EMAIL-EMAILADD = EMAILADD-LOW.
        APPEND IT_EMAIL.
        CLEAR: IT_EMAIL.
      ENDLOOP.
      IF NOT BPROC IS INITIAL.
        CLEAR: RBUT1, RBUT3.
        RBUT2 = 'X'.
      ELSE.
        CLEAR: RBUT2.
      ENDIF.
      IF NOT RBUT3 IS INITIAL.
        REFRESH: WS_FILE.
      ENDIF.
      IF SAPID IS INITIAL AND EMAILADD IS INITIAL.
        MESSAGE E000(ZZ) WITH TEXT-201.
      ELSEIF NOT SAPID IS INITIAL AND EMAILADD IS INITIAL.
        CLEAR IT_SAPID.
        READ TABLE IT_SAPID.
        SELECT SINGLE SUBNO FROM SOSU
          INTO GV_SUBNO
          WHERE USRNO IN ( SELECT USRNO FROM SOUC
                             WHERE SAPNAM = IT_SAPID-SAPID ).
        IF SY-SUBRC NE 0.
          MESSAGE E000(ZZ) WITH TEXT-202.
        ENDIF.
        CLEAR: IT_SAPID.
      ELSEIF NOT SAPID IS INITIAL AND NOT EMAILADD IS INITIAL.
        CLEAR: IT_SAPID, IT_EMAIL.
        READ TABLE IT_SAPID.
        READ TABLE IT_EMAIL.
        SELECT SINGLE SUBNO FROM SOSU
          INTO GV_SUBNO
          WHERE USRNO IN ( SELECT USRNO FROM SOUC
                             WHERE SAPNAM = IT_SAPID-SAPID ).
        IF SY-SUBRC NE 0.
          SUBMIT RSSOADM0 WITH USRNAM EQ IT_SAPID-SAPID
                          WITH NEW_SUBS EQ IT_EMAIL-EMAILADD
                          WITH SUB_ESC EQ 'U'
                          WITH EDAT EQ SY-DATUM
                          WITH BDAT EQ SY-DATUM
                         WITH BDAT EQ GV_NEXTDAY
                         WITH EDAT EQ '99991231'
                          WITH BTIM EQ SY-UZEIT
                          WITH ETIM EQ '240000'
                          WITH FORW_ALL EQ 'X'
                          WITH PSTHR2 EQ ''
                          AND RETURN.
        ENDIF.
        CLEAR: IT_SAPID.
      ELSEIF NOT EMAILADD IS INITIAL AND SAPID IS INITIAL.
        RECFLAG = 'X'.
      ENDIF.
    START-OF-SELECTION.
        PERFORM B_SENDMAIL.
    FORM B_SENDMAIL.
      YEAR = SY-DATUM+0(4).
      LOOP AT WS_FILE.
        CLEAR: FYL.
        FYL = WS_FILE-LOW.
        REFRESH: TAB2.
        CALL FUNCTION 'WS_UPLOAD'
             EXPORTING
                  FILENAME = FYL
                  FILETYPE = 'BIN'
             TABLES
                  DATA_TAB = TAB2.
        IT_TEXTLINE[] = TAB2[].
    DOCUMENT_DATA (SUBJECT OF MAIL)
        V_DOCDATA-OBJ_NAME   = DESC.
        V_DOCDATA-OBJ_DESCR  = SUBJ.
        V_DOCDATA-OBJ_LANGU  = SY-LANGU.
        V_DOCDATA-SENSITIVTY = 'C'.
        V_DOCDATA-OBJ_PRIO   = '1'.
    BODY OF MAIL
        IT_BODY-LINE = 'Collection Report'.
        APPEND IT_BODY.
    CONTENTS_TXT (Attachments)
        IT_CONTNT[] = IT_TEXTLINE[].
        DESCRIBE TABLE IT_CONTNT LINES V_LINE.
        READ TABLE IT_CONTNT INDEX V_LINE.
    PACKING_LIST
        V_OBJPACK-DOC_SIZE = ( V_LINE - 1 ) * 255 + STRLEN( IT_CONTNT ).
        V_OBJPACK-TRANSF_BIN = 'X'.
        V_OBJPACK-HEAD_START = 1.
        V_OBJPACK-HEAD_NUM   = 0.
        V_OBJPACK-BODY_START = 1.
        V_OBJPACK-BODY_NUM   = V_LINE.
        V_OBJPACK-DOC_TYPE   = 'TXT'.
        V_OBJPACK-OBJ_NAME   = 'ATTACHMENT'.
        V_OBJPACK-OBJ_DESCR  = 'Attached Document'.
        APPEND V_OBJPACK.
        CLEAR  V_OBJPACK.
    RECEIVERS of mail
        IF RECFLAG IS INITIAL.
          LOOP AT IT_SAPID.
            IT_RECVRS-RECEIVER   = IT_SAPID-SAPID.
            IT_RECVRS-REC_TYPE   = 'B'.
            IT_RECVRS-COM_TYPE   = ''.
            IT_RECVRS-EXPRESS    = 'X'.
            IT_RECVRS-NO_FORWARD = ''.
            IT_RECVRS-NO_PRINT   = ''.
            APPEND IT_RECVRS.
            CLEAR IT_RECVRS.
          ENDLOOP.
        ELSE.
          LOOP AT EMAILADD.
            IT_RECVRS-RECEIVER   = EMAILADD-LOW.
            IT_RECVRS-REC_TYPE   = 'U'.
            IT_RECVRS-COM_TYPE   = 'INT'.
            IT_RECVRS-EXPRESS    = 'X'.
            APPEND IT_RECVRS.
            CLEAR IT_RECVRS.
          ENDLOOP.
        ENDIF.
    OBJECT_HEADER (Filename)
        CONCATENATE 'Collection Report' '_'
                     SY-DATUM+4(4) YEAR '.TXT'
                     INTO V_OBJHEAD-LINE.
       V_OBJHEAD-LINE = FYL+16(25).
        APPEND V_OBJHEAD.
        CLEAR V_OBJHEAD.
    Function Module For Sending Mail with Attachment
        CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
             EXPORTING
                  DOCUMENT_DATA              = V_DOCDATA
             TABLES
                  PACKING_LIST               = V_OBJPACK
                  OBJECT_HEADER              = V_OBJHEAD
                  CONTENTS_HEX               = IT_CONTNT
                  CONTENTS_TXT               = IT_BODY
                  RECEIVERS                  = IT_RECVRS
             EXCEPTIONS
                  TOO_MANY_RECEIVERS         = 1
                  DOCUMENT_NOT_SENT          = 2
                  DOCUMENT_TYPE_NOT_EXIST    = 3
                  OPERATION_NO_AUTHORIZATION = 4
                  PARAMETER_ERROR            = 5
                  X_ERROR                    = 6
                  ENQUEUE_ERROR              = 7
                  OTHERS                     = 8.
        IF SY-SUBRC = 0.
          MESSAGE S000(ZZ) WITH TEXT-005.
        ELSE.
          MESSAGE S000(ZZ) WITH TEXT-006.
        ENDIF.
      ENDLOOP.
    end of my code *
    please help me guys... when i run this program,    DOCUMENT_NOT_SENT is what i always get.. 
    waiting for ur reply... thank you vey much and godbless.

    Hi,
    Try this sample code.
    FORM SEND_TO_EMAIL USING zFName.
      DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
      DATA: OBJHEAD LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
      DATA: OBJBIN LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
      DATA: OBJTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
      DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
      DATA: DOC_CHNG LIKE SODOCCHGI1.
      DATA: TAB_LINES LIKE SY-TABIX.
      DATA: ctmp(50) TYPE C.
    Creation of the document to be sent
      DOC_CHNG-OBJ_NAME = 'JOURNAL'.
      CONCATENATE 'SAP Payroll Journal file Period' pybegda INTO ctmp
                  SEPARATED BY SPACE.
      DOC_CHNG-OBJ_DESCR = cTmp.
      OBJTXT = 'SAP Payroll Journal'.
      APPEND OBJTXT.
      CONCATENATE 'For Period' pybegda INTO ctmp
                  SEPARATED BY SPACE.
      OBJTXT = ctmp.
      APPEND OBJTXT.
      CONCATENATE 'Attached File :' zFname INTO ctmp
                  SEPARATED BY SPACE.
      OBJTXT = ctmp.
      APPEND OBJTXT.
      OBJTXT = 'Please find the attachment.'.
      APPEND OBJTXT.
      DESCRIBE TABLE OBJTXT LINES TAB_LINES.
      READ TABLE OBJTXT INDEX TAB_LINES.
      DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
    Creation of the entry for the compressed document
      CLEAR OBJPACK-TRANSF_BIN.
      OBJPACK-HEAD_START = 1.
      OBJPACK-HEAD_NUM = 0.
      OBJPACK-BODY_START = 1.
      OBJPACK-BODY_NUM = TAB_LINES.
      OBJPACK-DOC_TYPE = 'RAW'.
      APPEND OBJPACK.
    Creation of the document attachment
      <b>LOOP AT xMail.
        CONDENSE xMail-aline.
        OBJBIN = xMail-aline.
        APPEND OBJBIN.
        CLEAR OBJBIN.
      ENDLOOP.</b>
      DESCRIBE TABLE OBJBIN LINES TAB_LINES.
      OBJHEAD = zFname. APPEND OBJHEAD.
    Creation of the entry for the compressed attachment
      OBJPACK-TRANSF_BIN = 'X'.
      OBJPACK-HEAD_START = 1.
      OBJPACK-HEAD_NUM = 1.
      OBJPACK-BODY_START = 1.
      OBJPACK-BODY_NUM = TAB_LINES.
      OBJPACK-DOC_TYPE = 'RAW'.
      OBJPACK-OBJ_NAME = 'DATA'.
      OBJPACK-OBJ_DESCR = 'SAP Payroll File'.
      OBJPACK-DOC_SIZE = TAB_LINES * 255.
      APPEND OBJPACK.
    Completing the recipient list
      LOOP AT PENERIMA.
        CONDENSE PENERIMA-PNRM.
        RECLIST-RECEIVER = PENERIMA-PNRM.
        RECLIST-REC_TYPE = 'U'.
        APPEND RECLIST.
      ENDLOOP.
    Sending the document
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
           EXPORTING
                DOCUMENT_DATA              = DOC_CHNG
                PUT_IN_OUTBOX              = ' '
           TABLES
                PACKING_LIST               = OBJPACK
                OBJECT_HEADER              = OBJHEAD
                CONTENTS_BIN               = OBJBIN
                CONTENTS_TXT               = OBJTXT
                RECEIVERS                  = RECLIST
           EXCEPTIONS
                TOO_MANY_RECEIVERS         = 1
                DOCUMENT_NOT_SENT          = 2
                OPERATION_NO_AUTHORIZATION = 4
                OTHERS                     = 99.
      CASE SY-SUBRC.
        WHEN 0.
          WRITE: / 'Result of the send process:'.
          LOOP AT RECLIST.
            WRITE: / RECLIST-RECEIVER(48), ':'.
            IF RECLIST-RETRN_CODE = 0.
              WRITE / 'The document was sent'.
            ELSE.
              WRITE / 'The document could not be sent'.
            ENDIF.
          ENDLOOP.
        WHEN 1.
          WRITE: / 'Too many receiver'.
        WHEN 2.
          WRITE: / 'Document could not be sent to any recipient'.
        WHEN 4.
          WRITE: / 'No send authorization'.
        WHEN OTHERS.
          WRITE: / 'Error occurred while sending'.
      ENDCASE.
    ENDFORM.

  • Opening PDF files using preview on some PDF file result in the content not displaying properly. The file I tried to look at has pictures and text. The pictures are displayed ok but the text is shown as pixalated boxes. The same file opens ok via a PC.

    Solutions please. Accessing PDF files online using preview normally works ok. However there are a clutch of files on the mothers union web site that although can be opened, present text as pixalated boxes. The pictures contained in the documents are however displayed OK. I experience the same problem on my Imac and my wifes laptop that runs Lion. The same site has other PDF files that can be opend OK. If I access the same problem files using a PC laptop running microsoft windows, they are opened OK with the text displayed as it should be. This is driving me mad....

    Raymondo1 wrote:
    The offending PDF files were created using word
    Yes. Word 2007. (You can see it in Preview if you do ⌘I or choose Tools > Show Inspector.) And it's the transparency issue. The three pics attached show the Jan 2012 newsletter (a) in Preview, (b) in Acrobat Pro, (c) again in Preview, after I saved it in Acrobat, flattening the transparency.
    For you, the solution is to use Adobe Reader -- with due note taken of
    <http://www.adobe.com/support/security/bulletins/apsb12-01.html>
    For them, I don't know. Presumably, they wish max compatibility for their newsletter, but I really don't know how Office 2007 generates PDF. Maybe they should check transparency settings and flatten before generating PDF? Or perhaps save as PDF v1.4 instead of PDF v1.5? I would use Distiller, but perhaps they can't afford it.

  • Can't create a file using fm 'File_Get_Name'

    hi gurus,
    Can you please help me with this issue. There's a program that have to create a file using the said fm. It was working before when it was set in OS NT. But when the settings and codes have been changed to UNIX, the program was able to generate the program. But the file doesn't exist. It seems it  doesn't create a file in that server.
    What else do I need to check?
    Points will be rewarded. Thanks
    Here's the code for your reference:
    CALL FUNCTION 'FILE_GET_NAME'
           EXPORTING
    *         CLIENT                  = SY-MANDT
                logical_filename        = 'Z_SYSBRIDGE' 
             OPERATING_SYSTEM        = SY-OPSYS
    *         PARAMETER_1             = ' '
    *         PARAMETER_2             = ' '
    *         USE_PRESENTATION_SERVER = ' '
    *         WITH_FILE_EXTENSION     = ' '
    *         USE_BUFFER              = ' '
           IMPORTING
    *         emergency_flag          =
    *         file_format             =
                file_name               = ltfile-out_path
           EXCEPTIONS
                file_not_found          = 1
                OTHERS                  = 2.

    Hi Maui,
    Did you check SM69, where the code that ties to this FM creates a file after it execute your FM...
    SM69 are os commands that does UNIX execution or other OS commands...
    or maybe you have missed another FM like FM 'SXPG_OS_COMMAND' or of some sort.
    Thanks
    William Wilstroth

  • Problem with Photoshop CS6. If I open a file using Camera RAW

    I have a new problem with Photoshop CS6.  If I open a file using Camera RAW, and process it as usual, CS6 doesn't want to save it the way it used to.  I don't know if I changed something by accident or not. 
    Here's what happens now: After opening from ACR to CS6 and completinhg all of my work, I choose "Save as..."  The save as window opens showing the file name and format.  The default format seems to be .PSD.  I use the drop down to select .jpg.  The file saves normally as a .jpg.  When I go to close the image from, I get a new prompt asking, "Save changes to Adobe Photoshop document DSC_xxxx.NEF before closing?
    I looked up at the file name in the bar above the work space and noticed that it does NOT change from "DSC_xxxx.NEF" to "DSC_xxxx.jpg" after I have saved the file as a .jpg,in my webesite  but it always used to do that.  This adds a few extra steps when closing a document and it really slows me down.
    In fact, I wouldn't swear to this, but I think it used to save to .jpg by default, without me specifying this.
    I don't see a setting in the preferences for what to use as the default file format for saving, so I don't know where to change it back.
    Any ideas?
    Thanks in advance

    You are in the wrong forum;  You actually need Photoshop forum at this link:
    <http://forums.adobe.com/community/photoshop?view=discussions>
    Hope you can repost your question at the correct link.

  • Trying to create a certificate file using keytool -help!

    Hi, I've followed a series of instructions using Terminal to create a certificate. Terminal produced a file and when i open it using Text Edit its about 20 lines long worth of code. I was hoping it would provide a certificate I could use. Maybe it has, I just don't know what I'm looking for!
    Im working in Viewer Builder and I'm in the Provisioning tab trying to enter the "Application ID"
    I'm totally stuck here. Please help!

    I'm using DPS pro. My app is for Android but won't be going as far as Google Play or Amazon. It's for internal use so I want to create an APK file to distribute via email. These are the set of instructions I'm following. I'm struggling to get this to work. What should I see when this has worked? Also what do I need to enter for the Application ID?
    Thanks or your help
    (Mac OS) Create a certificate file using Keytool
    Open Terminal, which is located in the Applications > Utilities folder.
    Type (or paste) the following line (replace “myname.key.p12” with the actual name of your certificate):
    1
    keytool -genkey -v -keystore myname.key.p12 -alias alias_name -keyalg RSA -keysize 2048 -storetype pkcs12 -validity 10000
    Specifying “10000” sets the expiration date after 22 October 2033.
    Enter and reenter a password. Until the Viewer Builder supports the creation of custom Android apps, it's necessary to share this password with Adobe. Create a password that you can share.
    Follow the prompts to specify the certificate information.
    When prompted to confirm choices, enter yes, and then press Return to use the same password.
    A certificate is created in your prompt location, such as your user name folder. Copy this certificate file to a known location. Write down the password as well.

  • How can I create an csv/excel file using pl/sql and then sending that file

    How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
    I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.

    968776 wrote:
    How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
    I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.You are trying to do it at a wrong place..
    Whay do you want database (pl/sql) code to do these things?
    Anyhow, you may be interested in :
    {message:id=9360007}
    {message:id=9984244}

  • Does anyone know how i can view PDF files using Galaxy Note 2?

    Does anyone know how i can view PDF files using Galaxy Note 2?
    This is what i have been doing;
    I click on the file i wish to view (via a portal)
    this file goes to notification widget (i drag down screen)
    notification/message says download complete
    i click on notification/message
    nows it says complete action using (here i only have 2 icon options 1= DB Text Editor 2 = HTML Viewer)
    I have installed Adobe Reader.

    Can you confirm if the downloaded file is a pdf file, that is it ends with .pdf?

  • How to extract text from a PDF file using php?

    How to extract text from a PDF file using php?
    thanks
    fabio

    > Do you know of any other way this can be done?
    There are many ways. But this out of scope of this forum. You can try this forum: http://forum.planetpdf.com/

  • Uploading files using FTP(Linlyn class)

    I'm currently learning java right now on my own, and I'm having some trouble.
    I'm trying to upload a txt file using the linlyn class. How do you create a file then upload it on an applet?

    I'm currently learning java right now on my own, and I'm having some trouble.
    I'm trying to upload a txt file using the linlyn class. How do you create a file then upload it
    from an applet?

  • Upload failed your changes were saved but could not be uploaded because of an error. you may be able to upload this file using server web page. save a copy

    Hi All,
    upload failed your changes were saved but could not be uploaded because of an error. you may be able to upload this file using server web page. save a copy button.
    This is the issue which I am facing while working with SharePoint 2010. In a sharePoint 2010 document library I am having an excel file and I am trying to open it from Windows 7 and is office 2010.
    I cam e across few suggestion as mentined below but unable to find the location where to do
    Go to Resource Policies > Web >
    Rewriting > Custom Headers > (if 'Custom Headers' is not visible, click
    Customize on the right top to enable the view).
    Create a new policy with the Resource as <fully qualified domain name of the SharePoint server:*/*> (for example https://sharepoint.juniper.net:*/* ).
    Create the action as Allow Custom Headers.
    Apply the settings to the required roles.
    Please suggest.

    Hi rkarteek
    All things you have to do is as follows:
    1. Open regedit.exe
    2. Naviagate to following key:
    [HKEY_CURRENT_USER\SOFTWARE\Microsoft\Office\14.0\Common\Internet]
    3. Click Edit Menu -> New -> DWORD with name of "FSSHTTPOff"
    (without quotes)
    4. Click on "FSSHTTPOff" and enter value of 1
    5.
    Close any Office Applications and browser sessions
    6. Try to reopen your document (no more read only or failure to upload)
    have a nice day!

  • How to get a list of file paths for all files used in a project

    I have a project in Premiere Pro CC which has a large number of bins.  A sequence in one of these bins uses files from other bins.  I am trying to find the locations of all each of the files used  in the project.
    1)  Obviously I can select each clip in the timeline and show in finder, but there a lot of clips
    2) The video usage associated with each file in the project would help.  However
               1.  I haven't found a way to display only clips that have video useage if all of the bins have not been expanded.
              2.  Video usage  shows usage for all sequences, so one would have to manually check the pull down for each file to see if it is used in the sequence in question.
    3) I tried exporting the project to final cut pro xml.  The path url gives me the information that I need.  For some reason, however, when I do the export only one clip's information is there, not the information for all of the other clips in the project.
    4) I tired an export for speedgrade and all of the file names are there.  However the paths are not. 
    Basically I want to find all of the files in the project and relocate them to a specific folder for that project.  There's got to be a way to do this but I'm not seeing it ....

    Thanks for the suggestion concerning the file path.  And certainly it would have been nice to have done this before beginning.  However this is a project that has been around for quite a while, and the files have been moved into different bins.  And now the project sequence is being revised.
    So the problem is, worded slightly differently, how can I search all of the bins for the files that are used just by this sequence, ignoring the files which are used by other sequences?  Or, how can I get a list of the file paths of the files that are used in the sequence?

Maybe you are looking for