WPC 7.0 Navigation node issue

Hi All - I am on WPC 7.0 and we did all the needed configuration for WPC 7.0, I have created a new website in WPC and publish it . I also created a Site Navigation and apply it to the Folder below my editor role.
Everything looks good but when I navigate to the Editor role I don't see the webpage under my WPC created website. This is the message I am getting "No content available for this navigation node"
Is there a known issue with WPC 7.0 which is causing this issue?
Thanks,
-Ash

We had similar issue. SAP replied to our OSS message and asked us to  patch WPC component.
Thanks,
Raj

Similar Messages

  • Expanding WPC detailed navigation nodes

    I'd very much like for our Web page composer navigation nodes in the detailed navigation to expand on load. Preferably I would like to have the option to expand all nodes.
    For me it doesn't even seem to work to use the new functionality of the detailed navigation iview where you can set the first node to expand on load. This works if the first node is a work set but not if it's a folder pointing to a WPC navigation structure.
    Any tips?
    Regards
    Henning Strand

    Jagadeesh,
    the detailed navigation (and everything that belongs to the framework page) is under responsibility of the Portal. The Web Page Composer tool is just managing the pages not how they are shown in the Portal environment. Therefore WPC  should not be blamed for lack of this specific functionality.
    What you want can be achieved by means of some custom code in the framework. You could create your own detailed navigation iview which following some logic determines which pages need navigation tree shown and which not. Writing such an iview is not trivial effort you may also try to insert some logic (iview) in the framework page which removes the detail navigation iview from the POM tree but I am not really sure if that will work or not.
    Hope this gives some more light.
    Best,
    --epexpert

  • No content available for this navigation node

    Hi,
    I am receiving the message "No content available for this navigation node" on clicking  System Administration in Portal. I receive the same messages for the other roles .
    Can somebody kindly help?
    Portal version: 7.01 SP7
    Best regards,
    Dharmi
    p.s,. For previous versions, no message is being generated.

    Hello Dharmi,
    It was a change in the default behavior, then when navigating to a folder/workset/role which has no default content to be displayed, the content area should render the default content component which is configured at property "DefaultContent" in the content area iView.
    The default value for this property is:
    "pcd:portal_content/com.sap.pct/every_user/general/com.sap.portal.noCont
    entMessage"
    which is the pcd location of SAP default content component.
    This property can also be configured with the pcd location of any component, It can also be set to an empty string if it desired to continue with the old behavior (empty page is displayed).
    Also in NW 7.01 SP8 it also have changed back to the old behavior - So in case you are upgrading your system to this version no changes are needed.
    I hope this info helps you to resolve your issue,
    If so please evaluate this answer,
    It will help SDN to keep growing,
    Best Regards,
    Edison Buttenbender

  • Use Navigation Node Title of Term Store in a Content Search webpart

    Hi,
    Do you have an idea on how to use the Navigation Node Title of a Term in Term Store to a Content Search webpart? I can now get the value of the Term itself, but I need is the Navigation Node Title of that term. I'm using managed properties. Thanks in advance. 
    Regards,
    Napster

    Take a look at this article that explains all the variables available while writitng search queries.  There is a whole section on managed metadata navigation terms.
    http://technet.microsoft.com/en-us/library/jj683123(v=office.15).aspx
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Help with Detail Navigation Node Landing Page

    Hi, When a user clicks on a Detail Navigation Node I have a landing page that says "Welcome to the <Text> Report Area>.  I have a different page for each DTN node so right now I'm maintaining quite a few landing pages.
    I'd like to have 1 dynamic page that says welcome to "Node Text".  Where the Node Text is the text of the detail navigation node they selected. 
    Does anyone know if this is possible to pull off?
    Thanks, Ken Murray

    Below is what your HTML should look like.
    <div id='welcomemessage'></div>
    <scripta>
    document.getElementById('welcomemessage') innerhtml = 'Welcome to'  + EPCM.getSAPTop().document.title;
    </scripta>
    Replace the scripta with script above, since if I put the script out there this forum throws some exception.
    Also add a . and remove the space before innerhtml because even doing so the forum is throwing error. SAP needs to get there act together at least on forum and not blindly filter certain characters.

  • Tooltip for the Navigation Node - language dependent / translation?

    Is it possible to provide language dependent Tooltip for the Navigation Node.
    I tried the Portal content translation, but there was no possibility to translate the tooltip.
    Talking about this:
    Property ID: com.sap.portal.navigation.Tooltip
    http://help.sap.com/saphelp_nw70ehp2/helpdata/en/49/32a70ee8c45aaae10000000a42189d/frameset.htm

    Hi Van Vi,
    when I get your question right, you are looking for a possibility to change the text of the navigation items, not the text inside a content page, correct?
    I am using MII 12.0.2. The workaround for me was to create different roles like "XMII User EN", "XMII User DE" which contain the navigation item in the according language. The content pages contain tags like Michael mentioned, e.g. {##LBL_KEYWORD} in an *.irpt page. Those tags are set using the language set for the user in the NetWeaver UME.
    Michael, is there a possibility to use this {} notation in the navigation in 12.1, so I do not have to create language based roles?
    Michael

  • Hide "No content available for this navigation node" message

    Hello everybody,
    we run EP7 SP022. We have a role with several BI reports / iViews. As long as the user selects no report the message "No content available for this navigation node" is shown. As far as I know this is standard behavoir but we'd like to hide this message.
    SAP note 1437667 says: "When navigating to a folder/workset/role which has no default content to be displayed, the content area should render the default content component which is configured at property "DefaultContent" in the content area iView. The default value for this property is:
    "pcd:portal_content/com.sap.pct/every_user/general/com.sap.portal.noContentMessage", which is the pcd location of SAP default content component."
    Does anybody know where the mentioned "content area iView" can be found, so that we could change the "DefaultContent" property ?
    Thank you in advance.
    Regards,
    Nikolaus

    Hi, hope this can help you
    In your portal navigation menu
    1.- Select the option content manage
    2.- Portal´s Content - select your node if you have it, if not select content avaliable for sap.
    3.- Content for final user
    4.- Portal standar users
    5.- Standar Framework Page . open this object
    5.1 .-Select internal area of desktop open it.
    5.2.- Select option content area and open it.
    5.3.- In property category on combo box, select show all by category.
    6 .- Search Default Content field and erase this content pcd:portal_content/com.sap.pct/every_user/general/com.sap.portal.noContentMessage
    Save the changes.

  • No Content available for this navigation node message after Portal Upgrade

    Hi,
    After Portal upgrade to 7.01 EHP1 SP7, when we are clicking on any role at the TLN, the Portal Content area is showing the message " No Content available for this navigation node". However before upgrade when we are clicking on any TLN role the content area used to show the first iview in the folder in the detailed navigation.
    Please help as we are in a very critical state.
    Best

    Ameya Pimpalgaonkar wrote:
    Hello Mahesh,
    >
    > Did  you happen to see this thread:
    >
    > Hide "No content available for this navigation node" message
    >
    > Ameya
    Hi Amiya,
    I already gone through this thread but iwe will get an empty page if we will change the value of default content to null in the Content Area iview. My requirement is to expand the folder in the detail navigation area and display the first iview in that folder in the content area whenever we click on any role in the TLN.
    Mahesh

  • Grey border of the detailed navigation node thickens

    Hi Experts,
    When an embedded or URL document library is used in a web page why is the grey border on the right hand side of the detailed navigation node thickened?
    Thanks in advance.

    Hi Vijay,
    you can created an url iview  and give the url property and also set the property to open in new window.
    Assign this a role. when u click the role it automatically open a new  window with the descried url iview.
    hope it helps you.
    Raghu

  • Mouse over of detailed navigation nodes?

    Hello EP Development Gurus,
    I am in need of displaying some text on the mouse over of the detailed navigation nodes. How can I achieve this? Where can i find the java script code relating to it?
    Helpful answers will definitely be rewarded. please help me.
    Thank you all in advance.
    best regds,
    Alagammai.

    Hi Harish,
    Thank you for your immediate reply.
    I think even if I create a full paged iView, the navigation panel will be there.
    I don't want the left side navigation inside the content area.
    In the existing default navigation panel, i need to display some mouse-over text.
    To be exact, I need the par file that contains the javascripting relating to the detailed navigation part. I checked in par files like <b>com.sap.portal.navigation.detailedtree</b> and <b>com.sap.portal.layouts.framework</b>. But no use. I am not able to find the relevant code there.
    If I am not clear, please get back to me.
    best regds,
    Alagammai.
    Message was edited by: Alagammai Arunachalam

  • How to count hits on external navigation nodes ?

    Hi there,
    our navigation is a mix of PCD generated navigation nodes and those generated by an external navigation connector.
    Now we can count hits on the PCD nodes (which are basically related to iviews) using "Portal activity report" .
    BUT how could we count the hits on the "external" nodes ? 
    Any ideas ?
    Greetings
    wawo

    Aliette, you can use the Portal-monitoring for this. See also this discussion
    "http://technet.oracle.com:89/ubb/Forum70/HTML/001350.html", because it's not 100% proof.

  • Permissions in Navigation nodes (WPC)

    Hi all!
    After that i set permissions for the pages in wpc i access the site and the page was showing like the permissions that was given.. But when i set the permission for node (in site navigation) the node still showing in TLN.
    Any idea?
    Regards,
    Leo

    No Sandeep...
    After that i  publish my site (in site navigation -> publish site navigation) i access my site with a user and password.. Then i want to set permission in a node in site navigation for when the user acess my site he don't see the node in TLN..
    For example: My Site Navigation contents..
    navigation.wpc
    My Area
    RH
    The permission of RH is: members_rh (group name) - FULL
    When the users who not be in group members_rh acess my site, they don't can view the link RH in TLN.
    Just setting the permission in node (RH) is not working..
    Regards,
    Leo

  • OHJ Navigation selection issue

    I am new to OHJ and am having a strange issue. After launching 'OHJ' help in a window, whenever I select one node in navigator tree the navigator tree selection goes to the node which was previously selected. But the topic is displayed correctly.
    I am having the same issue using 'HelpSet Previewer' also. Kindly help me in resolving this.

    We are using the 4.2.7 version of OHJ and 1.4.2 of JRE in a applet environment. I'll detail the issue and the work around which solved the problem.
    Environment
    We had a single html file with book marks in it. The TOC had links to the book marks. When first time context sensitive help was launched on a target which had the same link as one in TOC, the selection in navigator tree comes up correctly Afterwards any launch of navigator/context sensitive help will take the selection to the one that was selected first.
    Workaround
    Defined dummy TOC links so that context sensitive help is never launched on a target having same link as one in TOC.
    Another workaround is to split the single html to different html files.
    regards,
    Jay

  • Navigation list issue with dynamic variable

    Hi All,
    I'm a little bit stock with (maybe) a little issue. I'm looking for a way to put variable on a navigation list in the same page. E.X. there is where my navigation list is pointing : f?p=&APP_ID.:20:&SESSION.::&DEBUG.::P20_3,P20_1,P20_2:#État#,#Année Comptable#,#Période Comptable#: .
    I Need to inherit the value ( #État#,#Année Comptable#,#Période Comptable#:) from a sql query from the main region (list are in a subregion ).
    Could some one help me with that please ?
    Thanks in advance !!
    Eric

    Hmm.. on the last APEX SIG day in Belgium Oracle was very dark about that (as usual).
    They even were not sure what features would definitely be present in the new version.
    They did however expect it to be somewhere in october / november
    again. you can mimic by using a report-region looking like a list
    regards,
    Richard

  • Navigational attribute issue in query

    Hi gurus,
    Here is a very tricky issue that I am facing. If anyone could please help me with a workaround for the same.
    I have an infoObject called ZDIV_CUS which is basically 0CUSTOMER with 0DIVISION compounded to it. Hence, when I load data into ZDIV_CUS, I would have one record for a unique combination of customer and division. In functional words, I would have one customer maintained for multiple divisions. ZDIV_CUS also has other navigational attributes as 0SALES_OFF, 0SALES_DIST & 0SALES_GRP. Also, I have 0MATERIAL, which has 0DIVISION as a navigational attribute in my cube.
    Hence the master data for ZDIV_CUS looks as follows -
    0DIVISION    0CUSTOMER    0SALES_OFF    0SALES_GRP    0SALES_DIST
    01           100000       L001          L01           L010100
    02           100000       L005          L08           L020150
    01           100001       L001          L01           L050150
    03           100001       L005          L02           L052542
    The transactional data in my cube is as follows -
    0MATERIAL    0CUSTOMER    0DIVISION    0SALES_OFF   0NET_SALES   0MATERIAL_DIVISION (Material master div)
    102152          100000       01           L002         110000       02
    102545          100001       02           L002         12000000     02
    The above data is all transactional except for 0MATERIAL_DIVISION which comes from material division.
    My query is built in such a way that the division comes from 0MATERIAL (restricted to variable in the selection screen). ZDIV_CUS and its navigational attributes are being used in my query. The initial display is shown as per ZDIV_CUS_0SALES_OFF (i.e. sales office from ZDIV_CUS)
    The problem is that say for eg for the above mentioned scenario, the user executes the query for division 01 and the below mentioned output comes up -
    0MATERIAL_DIVISION     ZDIV_CUS    0MATERIAL    ZDIV_CUS_0SALES_OFF     0NET_SALES
    02                     100000      102152       L001                    110000
    If we take a closer look, we would know that ZDIV_CUS_0SALES_OFF should pick up value L005 and not L001 since the division for which the query is run is 0MATERIAL_DIVISION and not 0DIVISION.
    Request help to resolve the abovementioned issue.
    Thank you,
    Sree

    Can any one answer for Issue-2. Even I am also facing the same.
    Thanks in Advance.

Maybe you are looking for