WPC News including Teaser on one step ?

Hi,
is there a way of creating a WPC News (i read already the howto minicarticle)  and also have the teaser in one step ? It should be the same way as the old XMLForms : 2 XSLT sheet and 1 XML .
Creating 2 elements per news is redundant work
I don't find any hints how this can be accomplished....
Any ideas ?
Regards,
Kai

Hi, wanted to know if you were able to accomplish this task.
We have a similar scenario and would appreciate your insight on this.
Thanks
Leela

Similar Messages

  • I'm trying to upload the new itunes version because The older one doesnt match with the iphone 5. At one step it is required one code to allow the installation but as It is not the itunes code which one is it ?

    I'm trying to upload the new itunes version because The older one doesnt match with the iphone 5. At one step it is required one code to allow the installation but as It is not the itunes code which one is it ?

    Hello, GwladysPa. 
    Thank you for visiting Apple Support Communities. 
    I believe that the iTunes update is requesting your computer's administrator password to update the application.  Here is the article that explains this process. 
    Mac OS X: Software installations require administrator password
    http://support.apple.com/kb/HT2558
    Cheers,
    Jason H. 

  • I am a photographer looking to purchase a new iMac.  Which one should I buy and what should I include in the package?, I am a photographer looking to purchase a new iMac.  Which one should I buy and what should I include in the package?

    I am a photographer looking to purchase a new iMac.  Which one should I buy and what should I include in the package?, I am a photographer looking to purchase a new iMac.  Which one should I buy and what should I include in the package?

    In general most macs you buy are the same. If you will be doing quite a lot of editing of photos and videos, then the big things to look for are:
    Processor - 2.8ish GHz Intel i7 4-core - is about the best I have head of thus far.
    RAM - fairly easy to upgrade yourself, but 16GB is typically more than you will need for the next 5 years at least.
    iLife is reasonably good software for editing media, but as a photographer, you may have your own prefered software
    The good thing about Apple is that they don't sell ****** computers in general. They offer little in the way of customization of hardware which is both their strength and weakness.

  • One-Step iDVD

    I have several tapes I recorded on my new Canon HV20 dvd camcorder. I connected it with the accompanying firewire to the iMac and set it to VCR mode as directed by the One-Step tutorial. When I click onto "OK", it does nothing. Am I supposed to load the Digital Video Software disc that came with the camcorder first. I restarted the computer and repeated the process and I received a message stating "You inserted a blank DVD. Choose an action from the pop-up menu or click ignore." The pop-up options include OPEN Finder, OPEN iDVD, OPEN iTune, OPEN Disc Utility. When I select the OPEN iDVD option, it takes me back to the beginning, telling me to connect the camcorder to the computer with the firewire, insert an blank DVD and select "OK"......and, again, nothing happens!

    .....and, again, nothing happens!
    That's because iDVD One-Step doesn't support HD content. Sorry.
    From http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6757.html ; If your camera records video in the high definition HDV format, you can’t use the iDVD OneStep feature to transfer the footage to a disc. Instead, you must use iMovie HD to capture all the footage from your camera. Then, within iDVD, you can add the movie to a project, just as you do with all standard iDVD projects (projects that are not OneStep DVDs or Magic DVDs).
    F Shippey

  • One Step DVD quality

    I have been reading the posts about using IMOVIE09 and then using IDVD. I understand the quality is not great because of IMOVIE09 and the way it does the import.
    IS the quality better if I skip IMOVIE and use the One Step DVD option in IDVD directly? I am importing Mini-DV tapes.
    Thanks

    Hi
    IS the quality better if I skip IMOVIE and use the One Step DVD option in IDVD directly? I am importing Mini-DV tapes.
    YES !
    else on Quality and iDVD - my notes
    DVD quality 
    1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
    • Professional Quality
    (movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
    • Best Performances
    (movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
    • High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
    (movies + menus up to 120 min.) - slightly lower quality than above
    Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
    About double on DL DVDs.
    2. Video from
    • FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
    • iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
    when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
    • iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
    3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09  this can also be set)
    This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
    4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
    use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
    5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
    6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
    7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
    (I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
    8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
    iDVD quality also depends on.
    • DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
    deliver anything better that this.
    HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
    These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
    Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
    _ Roxio Toast™ 10 Pro incl. BD-component
    _ BD disks and burner if full length movies are to be stored
    _ BD-Player or PlayStation3 - to be able to playback
    The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
    Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
    • HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
    less than 5Gb and Your result will most probably not play.
    • How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
    • Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
    • Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
    iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
    • What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
    other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
    Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
    strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
    Convert to .aiff first and use this in movie project
    • What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
    (If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
    (Dropping a PAL movie into a NTSC iDVD project
    (US) NTSC DVDs most often are playable in EU
    (EU) PAL DVDs most often needs to be converted to play in US
    UNLESS. They are play-backed by a Mac - then You need not to care
    • What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
    • How You encode and burn it. Two settings prior iDVD’08 or 09
    Pro Quality (only in iDVD 08 & 09)
    Best / High Quality (not always - most often not)
    Best / High Performances (most often my choice before Pro Quality)
    1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
    (x4 by some and may be even better)
    2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
    Region codes.
    iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
    DVD Studio pro can set Region codes.
    1 = US
    2 = EU
    unclemano wrote
    What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
    I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
    I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
    For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
    to get this to work I
    • Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
    • Use Verbatim DVD-R (absolutely no +/-RW)
    • Set down burn speed to x4 - less burn errors = plays on more devices
    • No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
    • and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
    • and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start  a brand new iDVD project
    • Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
    • Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
    Try to break the process up into two stages
    • Save as a DiskImage (calculating part)
    • Burn from this .img file (burning stage)
    To isolate where the problem starts.
    Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
    • Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
    • Use Verbatim DVD-R (absolutely no +/-RW)
    • Set down burn speed to x4 - less burn errors = plays on more devices
    • No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
    • and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
    • and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start  a brand new iDVD project
    • Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
    • Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
    TO GET IT TO WORK SLIGHTLY FASTER
    • Minimum of 25Gb free space on Start-Up hard disk
    • No other programs running in BackGround e.g. Energy-Saver
    • Don’t let HD spin down or be turned off (in Energy-Save)
    • Move hard disks that are not to be used to Trash - To be disconnected/turned off
    • Goto Spotlight and set the rest of them under Integrity (not to be scanned)
    • Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
    pointer to this - turns on screen saver - to show that it has nothing to show
    • No File Vault on - Important
    • NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
    • Lot's of icons on DeaskTop/Finder also slows down the Mac noticeably
    • Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
    • And let Mac run on Mains - not just on battery
    Yours Bengt W

  • How to retrieve the user input in One Step Screenflow

    Hello all,
    I am new in KM. I would like to ask in One Step Screenflow, I have add a inputfield into the ConfirmComponent. How can I retrieve the user input?
    public IRenderingEvent execute(IScreenflowData sfd) throws WcmException
              inp.setLabel(new Label("Delegation:"));
              ConfirmComponent cc = new  ConfirmComponent(ConfirmComponent.OK_CANCEL,this.context.getLocale(),inp);
              String sRid = (String)this.values.get(0);
              RID rid = RID.getRID(sRid, null);
              OneStepScreenflow oscf = new OneStepScreenflow(sfd,this.getAlias(),rid,cc);
              return oscf.execute();
    In the IRenderingEvent , How to retrieve the user input?
    public IRenderingEvent execute(IResource res, Event event ) throws WcmException
              if (event instanceof ConfirmEvent)
                        ConfirmEvent cce = (ConfirmEvent)event;
                        if (ConfirmEvent.CHOICE_YES.equals(cce.getChoice()))
                                  return new InfoEvent(Status.OK, "Done !");
                        else if (ConfirmEvent.CHOICE_NO.equals(cce.getChoice()))
                                  return ConfirmComponent.onNo(event, res.getContext().getLocale());
                        else if (ConfirmEvent.CHOICE_CANCEL.equals(cce.getChoice()))
                                  return ConfirmComponent.onCancel(event, res.getContext().getLocale());
              return new InfoEvent(Status.ABORT, "Aborted.");
    Many Thanks,
    Sunny

    Hello yoga,
    Many Many thanks for your reply again.
    I have just try the class in the thread link.
    There is a error
    "The project was not built since its classpath is incomplete. Cannot find the class file for javax.servlet.http.HttpServletRequest. Fix the classpath then try rebuilding this project."
    The errors occurs because of "extends OneStepComponent"
    public final class NewConfirmInputComponent extends OneStepComponent
    Where can find javax.servlet.http.HttpServletRequest to include it in my classpath?
    Thanks
    Sunny

  • One step Option for HDV

    iDVD won't do a one-step video from HDV, so I'm looking for the next quickest way to get a DVD burned from a tape. Sometimes this will be done in the car ride back from the game I just taped.
    A second, related question: is the disk image created by iDVD usable by other software, including Windows? I need to create a half dozen copies between friday night and Saturday morning on a High School football budget (i.e., no multi-disk duplicators in our near future...)
    Thanks for your help.

    Hi Mish:
    Thanks for this.
    Don't care about including photos or videos in these
    menus, and even with no content added, processing the
    menus can take 10s of minutes. I don't know why you
    would forego creating a simple menu with a nice picture
    and a title saying "The Game". It looks much better than an
    autoplay and certainly doesn't take more than 5 min. to encode.
    I have been playing with some of the old simple (static) themes and the have much faster encoding times, so I could create a template with a standard picture and text and place the new video in that. But it’s of near zero value since these DVDs will only be used to review the game with the players, and going through the menu to see the nice picture will be more of an annoyance than an appreciated graphic feature. Hadn’t thought of doing an autoplay, which actually makes a lot of sense.
    Would the disk image be compatible with any
    standard Windows utility? No. You'll need to
    convert the .img file to ISO in order to burn it on a PC. Here's how:
    http://homepage.mac.com/geerlingguy/macsupport/mache lp/pages/0015-burnidvd-faq/idvd_hackfaq.html#3
    Thanks!
    On the other hand, you'll probably need to burn
    the file onto a DVD for transferring to the PC, meaning
    you could simply opt for burning the (video) DVD
    then make copies on any other machine.
    .... burn slow and use quality media
    hope this helps
    Yes, definitely. Thanks
    Chuck
    iMAC4,1 2GHz Intel Core Duo, 1.5 GB RAM   Mac OS X (10.4.9)  

  • One step DVD unable to capture video

    I have made many movies using one step dvd in the past. For some reason, now I get a message "Nothing Captured" "No video has been captured" when I try to create a new dvd from my video camera. I used the same camera and connection cords on another apple and it worked fine. It worked fine on this computer in the past. Any ideas?
    Thanks

    Bengt;
    Good ideas but I have checked each of those items. My camera is set to play, the tape works and I am using my firewire cable. The strange thing is I did everything exactly the same on a different apple computer and it copied the tape to the DVD with no problem.
    Thank you for thinking about my problem.

  • HT1473 I have always imported my cds into iTunes using one step called 'joining cd tracks' which is done under the "Advanced" drop down menu. I then went on with the process. Half way through the process today the "join tracks' choice greyed out. Not avai

    I have always imported my cds (including books) into iTunes using one step called "join cd tracks" which is under the "Advanced" menu. Never a problem. But today I was importing a 10 disc book and on the 7th disc all of a sudden the choice to join cd tracks was greyed out. I have tried it with other discs. No luck. How can I get to this option again. I was not doing anything different so don't know what took away this choice. Can anyone help me?

    Thought it had worked but soon found out it had not.
    after further days of trying finally, solved it for me Yesterday.
    turned off notifications when locked, and bingo, wow.
    i have not turned off iCloud but location services are also off.
    best thing to do I found was keep checking your usage, settings, general, usage, and flip down to bottom, if the standby and usage are similar there is a problem, if there is a big difference then all is ok. Just keep turning things off and on until the difference is very apparent.
    something on my phone was keeping the phone alive even when turned off, and I think this was the phone repeatedly trying to update continually.
    to me this is definitely down to the iOS, my wife has exactly same phone and iOS but hers doesn't have any problem and the battery lasts for days.
    the guy at the Genius Bar told me to restore the phone via iTunes, not iCloud. This is because iCloud remembers the exact info from your phone and simply reinstates it when you restore, and this includes the iOS too.
    when I get home from holidays that's what I'll do, or wait for iOS 8 in few weeks. But I'm so pleased I finally made it work, I was beginning to think ditch the phone and buy Samsung.
    anyway anyone out there please try my final solution and let me know if it works for you?

  • How to sync deleted app same on iTunes same on device in one step ?

    Using XP 32bit with iTunes 11.1.3.8 and ios 7.0.4 on ipad 3, when deleting an app and syncing using the usb cord,
    I have to do twice, so once in itunes library the other time in device app tab., this to have "aligned" same pc same ipad.
    If I do only one of the two steps the deleted app remains still or on device or on iTunes library.
    So how to delete and sync the device only with one step (with iTunes 10.6.3 this was possible) ?
    If it is called sync it has to do sync or not ?
    Thanks

    You can also *Transfer purchases from device* to copy all your purchased content into the new library. If you've got media on the phone that wasn't backed up from the old machine then you should probably take a look at this post from Zevoneer for options on moving your data back to a computer.
    http://discussions.apple.com/message.jspa?messageID=11657508#11657508
    tt2

  • How can I convert a large batch of NEFs to JPGs in one step or action?

    How can I convert a large batch of NEFs to JPGs in one step or action?  I'm very new to Lightroom and know almost nothing about it, so I need to know step-by-step.  I've seen online advise about exporting but I don't know what that means - export from where to where?  Can anyone help me?  Thanks!

    I suggest you take a little time to watch some tutorials. If you are that new to Lightroom that you don't understand what export means then it would probably be a good idea for you to get some other information as well. If you don't I think you'll find Lightroom can be very confusing. You haven't indicated what version of Lightroom you are using. The link I'm providing you is a series of getting started videos for Lightroom 5. And just about everything in this series will apply to other versions. You will note that there is one video devoted exclusively to exporting images. But I think you really need to watch the whole series.
    Getting Started with Adobe Photoshop Lightroom 5 | Adobe TV

  • I recently had to get a new windows computer, old one crashed. My tech guy got all my itunes library over to the new one, and all my songs are there. However, some won't play and ask me for the password for the apple id they were purchased under. 2 of the

    I recently had to get a new windows computer, old one crashed. My tech guy got all my itunes library over to the new one, and all my songs are there. However, some won't play and ask me for the password for the apple id they were purchased under. 2 of these ids are obsolete and I have no access to those accts. The songs all played on my old computer without prompting me for a password.
    Any ideas how I can get around this hassle and get them all to play? We're talking about 800 songs that are being obstinate. The new computer is authorized under my "new" Apple id, which I have used for years.

    Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later.  Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid.  Apple notes it is your responsibility to back up your purchases.
    Select the store on the left side of iTunes.
    Click on Purchased on the right side under Quick Links.
    You can re-download your available previous purchases.

  • How do I get an old library to a new computer? Old one crashed

    How do I get my library of music to a new computer? I authorized the new computer but nothing is going to the new computer Please help

    your library won't magically appear on the new machine.
    this is one option:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    however, the music feature is currently available in the US only.
    if you have your library on an iPod, check out this post by Zevoneer.
    you can also remove the HDD from the crashed computer, put it in an external enclosure, and try to retrieve your library from it.
    of course, the easiest way would be to restore from your latest backup. if you don't have one, start backing up once you're up and running. get an external HD and copy the entire iTunes folder (not just the iTunes music or media folder) to it. use e.g. SyncToy to keep both folders in sync.
    SyncToy
    SyncToy 2.1 is a free application that synchronizes files and folders between locations. Typical uses include sharing files, such as photos, with other computers and creating backup copies of files and folders.

  • Check/uncheck record results on more than one step at a time

    I have one hundred plus sequence files and several thousand steps total. Checking and un-checking record results one step at a time takes a long time. I'd like to be able to select several steps at a time then check or un check the "Record Results" option for all those steps at once. How do I do this? I'm using TestStand 2.0

    Hi Kevin,
    Thanks for contacting National Instruments.
    Do you want to disable result recording for ALL sequences on this station? If so, you can turn on this option in the TestStand sequence editor (Configure >> Station Options, turn ON checkbox "Disable result recording for all sequences").
    However, if you only want to do this for selected sequence files, then Ray is correct - you would need to write an external routine that will automate this for you. Attached is a zipfile containing a VBScript that will iterate through one sequence file ("c:\test.seq") and change all steps (all sequences, including Main/Setup/Cleanup) to turn off "Record Results". It first saves a backup copy of the sequence file, makes the changes, then save
    s the modified sequence file. You can enhance this script to work for more than one sequence file by using Microsoft's FileSystemObject.
    The VBScript uses a DLL I created, which exposes the TestStand 2.0 Engine object as an ActiveX DLL. Before you can run the VBScript, you will need to register this DLL:
    regsvr32 TSEngine.dll
    Then, the VBScript can be executed just by double-clicking it. Hopefully this helps get you started toward creating an automated way of solving this problem!
    David Mc.
    National Instruments
    Attachments:
    ts2seqfiles.zip ‏4 KB

  • How do I scan & save a PDF in just ONE step?

    How do I scan & save a PDF in just ONE step? I can easily scan a document to an OCR'd PDF, but it does not seem to save it until I manually select "save". Seems there should be a way to set up scans to a particular folder destination, with a naming convention & auto numbering, such as YYYYmmDD-0001, YYYYmmDD-0002, etc. I've looked thru the Create>PDF form scanner>configure presets, and no such item seems to exist. There IS a "add to existing document", but that's not what I want to do. I just want to select "scan", and have it create an OCR'd PDF file in a folder.

    Hi,
    You can achieve this via Action wizard. Auto Numbering is not possible however you can combine Scan and Save As in one action.
    Click Tool>Action Wizard
    Create New Action
    See screenshot and set the options that i have highlighted in blue
    Let me know if that helps.
    ~Pranav

Maybe you are looking for