WPC Problem after creation of new Site - no "Edit Page" Link available

Hello,
I have a problem with WebPageComposer (WPC) and Edit Page link.
We are currently on EP 7.01 SP6.
(I have the wpc_editor_role for my user)
I am doing the following:
1) I create a new site, (derived permissions for all folders is wpc_editor_role - Full Control),
2) I Create some article within its Site Content folder
3) I create a new web page in its Web Pages folder
4) assign the article to the web page and publish it
5) add web page within Site Navigation as a new node
6) I used Publish Site Navigation
After clicking on the web page within Web Pages folder it does a preview.
Our older WPC content does display the Edit Page link - the new one does not.
What step am I missing here?
Maybe it is an upgrade issue?
Best Regards, Thomas
P.S.: copying one of our older WPC pages into my new site + renaming it via KM + removing old content + assigning new one does display the correct link after publishing it! Any indeas?

Dear Thomas,
It sounds like your are doing all the right actions, I don't think that your missing any step in the process, but please consider the following.
Are you using a custom WPC layout template? The reason I ask is that I have developed a number of WPC custom templates and in some circumstances I have needed to remove/hide the "pageheader" section of the template. This action removed the links from displaying at the top of the page. Try creating and publishing a web page using a SAP standard WPC layout and see if the edit link appears once the page is published.
The editing and preview page views do not display the "edit" link, they only display the other page header links that can be assigned to a page. The edit link is only visible when viewing the page via the portal, not in edit mode. Another question, was the deployment of KMCWPC successful and without error? I have experienced issues where the deployment did not fully complete, causing some subtle issues regarding publishing of WPC content and redeploying KMCWPC fixed the issue. I hope this helps.
Best Regards,
Chris

Similar Messages

Php web site problem - after loding the web site blank white page

Hi Guys
i've set up Mac server with 10.6.2 its running 3 web sites . the problem is when i upload the web files in to my Mac server and start to browsing from my laptop via internet, web site is not loading. So i upload the sample web page just as a simple html file. its working fine , But when i upload this php web site problem agin . problem : site is loading from loading bar, But i can not see anything from browser just white page , no page source nothing ......
any suggestions ?

This is the Error from Server Admin
ing: date(): It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Berlin' for 'CEST/2.0/DST' instead in /Library/WebServer/Documents/kortxpress/libraries/joomla/utilities/date.php on line 184
[Mon Apr 12 14:51:38 2010] [error] [client 91.127.146.71] PHP Notice: A session had already been started - ignoring session_start() in /Library/WebServer/Documents/discard/config.php on line 2
[Mon Apr 12 14:51:38 2010] [error] [client 91.127.146.71] PHP Warning: require_once(/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php ): failed to open stream: No such file or directory in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:51:38 2010] [error] [client 91.127.146.71] PHP Fatal error: require_once(): Failed opening required '/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php' (include_path='.:/usr/lib/php') in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:51:41 2010] [error] [client 91.127.146.71] PHP Notice: A session had already been started - ignoring session_start() in /Library/WebServer/Documents/discard/config.php on line 2
[Mon Apr 12 14:51:41 2010] [error] [client 91.127.146.71] PHP Warning: require_once(/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php ): failed to open stream: No such file or directory in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:51:41 2010] [error] [client 91.127.146.71] PHP Fatal error: require_once(): Failed opening required '/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php' (include_path='.:/usr/lib/php') in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:51:42 2010] [error] [client 91.127.146.71] PHP Notice: A session had already been started - ignoring session_start() in /Library/WebServer/Documents/discard/config.php on line 2
[Mon Apr 12 14:51:42 2010] [error] [client 91.127.146.71] PHP Warning: require_once(/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php ): failed to open stream: No such file or directory in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:51:42 2010] [error] [client 91.127.146.71] PHP Fatal error: require_once(): Failed opening required '/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php' (include_path='.:/usr/lib/php') in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Assigning the return value of new by reference is deprecated in /Library/WebServer/Documents/kortxpress/administrator/components/com_joomfish/c lasses/JoomfishManager.class.php on line 184
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Assigning the return value of new by reference is deprecated in /Library/WebServer/Documents/kortxpress/administrator/components/com_joomfish/c lasses/JoomfishManager.class.php on line 193
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Assigning the return value of new by reference is deprecated in /Library/WebServer/Documents/kortxpress/administrator/components/com_joomfish/c lasses/JoomfishManager.class.php on line 217
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Assigning the return value of new by reference is deprecated in /Library/WebServer/Documents/kortxpress/administrator/components/com_joomfish/c lasses/JoomfishManager.class.php on line 226
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function eregi() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 188
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 189
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: strtotime(): It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Berlin' for 'CEST/2.0/DST' instead in /Library/WebServer/Documents/kortxpress/libraries/joomla/utilities/date.php on line 56
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: date(): It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Berlin' for 'CEST/2.0/DST' instead in /Library/WebServer/Documents/kortxpress/libraries/joomla/utilities/date.php on line 198
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: date(): It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Berlin' for 'CEST/2.0/DST' instead in /Library/WebServer/Documents/kortxpress/libraries/joomla/utilities/date.php on line 198
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: copy(/Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/livechat-onl ine.jpg): failed to open stream: No such file or directory in /Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/helper.php on line 47
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: copy(/Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/livechat-off line.jpg): failed to open stream: No such file or directory in /Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/helper.php on line 52
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: copy(/Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/livechat-lar ge-online.jpg): failed to open stream: No such file or directory in /Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/helper.php on line 57
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: copy(/Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/livechat-lar ge-offline.jpg): failed to open stream: No such file or directory in /Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/helper.php on line 62
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:57:23 2010] [notice] caught SIGTERM, shutting down
[Mon Apr 12 14:57:56 2010] [warn] module php5_module is already loaded, skipping
[Mon Apr 12 14:57:57 2010] [notice] Apache/2.2.13 (Unix) PHP/5.3.0 configured -- resuming normal operations
[Mon Apr 12 14:58:46 2010] [error] [client 91.127.146.71] PHP Notice: A session had already been started - ignoring session_start() in /Library/WebServer/Documents/discard/config.php on line 2
[Mon Apr 12 14:58:46 2010] [error] [client 91.127.146.71] PHP Warning: require_once(/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php ): failed to open stream: No such file or directory in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:58:46 2010] [error] [client 91.127.146.71] PHP Fatal error: require_once(): Failed opening required '/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php' (include_path='.:/usr/lib/php') in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:58:48 2010] [error] [client 91.127.146.71] PHP Notice: A session had already been started - ignoring session_start() in /Library/WebServer/Documents/discard/config.php on line 2
[Mon Apr 12 14:58:48 2010] [error] [client 91.127.146.71] PHP Warning: require_once(/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php ): failed to open stream: No such file or directory in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:58:48 2010] [error] [client 91.127.146.71] PHP Fatal error: require_once(): Failed opening required '/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php' (include_path='.:/usr/lib/php') in /Library/WebServer/Documents/discard/index.php on line 5

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

HT4942 After Creating a new document or editing an old document in Pages on my iPad I no longer see the changes in Pages on my iPhone. iCloud services are on with both devices.

After Creating a new document or editing an old document in Pages on my iPad I no longer see the changes in Pages on my iPhone. iCloud services are on with both devices.

Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV).

Creation of new site failed with error

We are using SAP ME 5.2.4.3.
Today I have tried to create a new site via
Site *
User ADMIN
Password *****
using the following values:
Site: 1301
Description: ODS Training
Type: Production
Site is Local: Checked
Tiime Zone: Europe/Vienna
I also set a password for the admin on the new site.
After saving the site I got the following error message:
Error while processing XML message <?xml version="1.0" encoding="UTF-8"?> <DX_RESPONSE> <CONCLUSION success='no'/> <IMPORT_RESPONSE> <TOTALS failed='1' total='1' invalid='0' succeeded='0'/> <LOG> 1 records skipped; update is not allowed 1 records skipped; update is not allowed APPLICATION_SETTING_BO failed (SETTING:transaction.log.enable) Exception occurred: Can't find resource for bundle java.util.PropertyResourceBundle, key SYSTEM_SETUP.transaction.log.enable.desc Database rollback occurred Database commit occurred </LOG> </IMPORT_RESPONSE> </DX_RESPONSE> (Message 12943)
And the site was not created correctly. (Site "1301" invalid (Message 12930) )
Any idea what could be the problem?
Best regards
Dieter

Hi Dieter,
Looks like the error happened during the initial data load for your site, exactly APPLICATION_SETTING_BO object. Make sure that APPLICATION_SETTING table exists in the DB and it matches your version of ME 5.2.4.3 (all the fields are correct).
Also you can match the table with the corresponding ApplicationSettingBO.idat
Hope it helps
Ivan

Configuration steps involved after creation of new personnel subarea in sap hr module

Dear Friends,
Let me know what all config to be done after creation of a new personnel sub area in SAP HR module?
So that all infotypes including IT0007 & IT0008 are captured for hiring an employee & running the payroll ?
Reg,
TD

Hi Tanuja,
Normal customization only you have to do for every PA & PSA. if you don't have the steps i will give you the steps.

Issue with Check in of template or creation of new site connection issue...

Hi all, when ever i am trying to check in a new template through Dynamic converter or else, try to create a new site connection through site designer, i am getting the below error message, can anyone please let me know whats needs to be done to get this issue resolved.....
Content Server Request Failed
Unable to execute service DC_CHECKIN_NEW and function Imeta.
(System Error: Unable to execute query 'Imeta(insert into DocMeta (dID, xComments, xCpdIsTemplateEnabled, xCpdIsLocked, xReadOnly, xHidden, xCollectionID, xInhibitUpdate, xTrashDeleter, xTrashDeleteLoc, xTrashDeleteName, xTrashDeleteDate, xForceFolderSecurity, xDiscussionCount, xDiscussionType, xPartitionId, xWebFlag, xStorageRule, xWebsiteObjectType, xTemplateType, xWebsites, xDontShowInListsForWebsites, xWebsiteSection) values(13, '', 0, 0, 'FALSE', 'FALSE', 0, 'FALSE', '', 0, '', null, 'FALSE', 0, 'N/A', '', '', '', '', 'GUI Template', '', '', ''))'. ORA-29861: domain index is marked LOADING/FAILED/UNUSABLE)
Thanks & Regards,
Prashant.

Found this on metalink: NOTE:737470.1
Cause:
"This is caused by zone indexed fields that were created outside of the Content Server interface. Dropping and recreating the zoned index fields should resolve the issue."
To implement the solution, please execute the following steps:
Log in to the Content Server through the browser as sysadmin.
Navigate to Administration -> Zone Fields Configuration.
On this page, change the value of the search engine in the dropdown list to DatabaseFullText if database full text indexing is being used. Leave it set to Database if database metadata only indexing is being used.
If there are fields listed in the left-hand box (Zone Text Fields):
Make a note of all the fields listed in the left-hand box (Zone Text Fields), or take a screenshot of this page.
Remove all of the fields from the Zone Text Fields box by highlighting each field and clicking the right arrow.
Click the Update button.
Run the following query directly against the database to see if any zoned fields are still present. The zoned fields can be identified by the ZFT suffix, for example, DDOCTITLE_REVISIONS_ZFT:
Select index_name from user_indexes where table_name = 'REVISIONS';
If any indexes with the ZFT suffix are returned in the results as an index, drop that index from the Revisions table in the database.
Verify that the error no longer appears.
Re-add any desired zoned field indexes through the Administration -> Zone Fields Configuration page.

Do not see image and content folders after creating a new site

Why didn't I see the image folder, content folder......aftter I create a new site?

DW does not create any folders for you, except those used by DW code (Templates and SpryAssets for example).
It's up to you to organize your site the way that makes the most sense to you by adding in folders like images, content, pages, etc.
Just don't move files out of any of the automatically generated folders that DW does give you, that can break things (especially Template .dwt files).

Significant problem when importing a new site

Ok, let me first mention that I'm using DW MX, not a newer iteration. What can I say? I like this version, it works great for my needs, and I don't like the newer ones.
So, I have all the properly categorized files for my website on my hard drive, and I was going to manually import the site into DW. I've done this before and it worked fine. However, once everything was brought in as a new site and I opened an HTML file to edit some photos/text, I saw that alll my images are broken, all the backgrounds are missing, as well as my image bars, and in some places the text formatting is gone (like a centered heading in bold is now aligned left with </center> next to it (Why am I seeing HTML? I'm in design view!)
I noticed when I right-clicked on an image and selected "Source File", it's referencing the HTML folders, not the Image folders. I re-linked one image on one of my HTML pages for testing and saved the change, and I then checked the background images on some other HTML pages, and now they all reference that image folder of the page I saved instead of my Backgrounds folder.
I'm not sure why the images suddenly decided to link to HTML pages. At some point with moving, my transition to different computers, and different versions of DW, my site disappeared from my list of sites in this DW MX. I re-imported it from my C drive and got this. I'm going to have a LOT of work re-linking all my images, bars, backgrounds, and correcting text layout on all my pages if I can't get this fixed. At least the website currently online is unaffected. I'm wondering if I should just download the website that on the remote server somehow into DW. I know it's all properly linked online.
Anyone have any suggestions?

When you say "download the intact site first," do you mean from the server? I'm not sure where you're talking about. The intact site exists only on my hard drive, accessed through Windows Explorer. I imported this as a new site into DW. However, I had evidently not linked the images, backgrounds, bars, etc, on the HTML pages. Everything on the server is in one folder - no organization there at all, which is the way it used to be.
I'm puzzled, however - it's been months since I messed with this site, and I've forgotten a lot of what I did. I must have started on my HD, created and organized all the folders and files to my liking, and saved it. This would have invalidated all my links which I had in place when all the HTML pages were in one huge folder. This is probably why everything is so broken within DW, but why everything still works online - I haven't fooled with anything on the remote server (yet). Even though this isn't the biggest site in the world, considering how much time I have in my schedule, it's still going to take me about two weeks worth of work to fix this.

FaceTime Problem After An Upgrade/New Number?

Hi
Someone I know has upgraded their iPhone and had temporary number while their PAC code was used to change that temporary number back to their old one that they had had on their old phone.
They can be texted and called in the traditional manner on their original number now their temporary one has been updated, but their iMessage and FaceTime has stuck with their temporary number that they only had for 36 hours and now that the main phone number has been re-instated they can not be reached on FaceTime on that number, only on their temporary number that they no longer have.
How can they transfer their FaceTime number from the temporary one that they had just very briefly after getting the new handset. to their main number that they had before and have now?
Thanks

Try logging out of the existing Apple ID with iMessage and FaceTime on the iPhone followed by logging back in with the Apple ID which should register the old phone number that has now been re-activated with the iPhone.

FDF problem after 8.2.2 MSP upgrade (blank page)

Hi all,
in our enterprise environment we use FDF to dinamically populate PDF files on our site and we also distribute Adobe Reader via GPO to our Active Directory computers. We had no problems with 8.2.1 (and of course previous versions too) so we know how to follow the MSI / MSP / MST procedure.
With the latest 8.2.2 we have done the same old procedure but we finally had computers that, after installing the new version, couldnt open this PDF (FDF populated) on their browsers: users received a blank page tryin to opening the document, while they had no problems opening in the browser PDF documents that were not FDF-generated (we have other documents that are static or crystal reports based and they all work).
We then started troubleshooting in order to identify if the problem was related to 8.2.2 version or to something in the MSI deployment procedure.
This is what we found:
1) a clean 8.2.0 (or 8.2.1) installation, updated to 8.2.2 via the Adobe Updater worked correctly, so the problem was not generally related to 8.2.2 but to the MSI deployment procedure
2) we noticed that we have wrongly applied 8.2.2 msp to 8.21 patched msi and that this was not correct, so we recreated the MSI package applying 8.2.2 msp patch to 8.2.0 original msi -> nothing changed, blank page
3) we tried to install it without using a MST customization file -> still no luck, blank page
4) we tried to install 8.2.0 and 8.2.2 by running separately the 8.2.0 MSI and the 8.2.2 MSP -> it worked
So, it seems that the problem is when you create the new 8.2.2 MSI starting from 8.2.0 MSI + 8.2.2 MSP (if you run this kind of MSI without using a GPO the result is FDF not working, so it's not specifically related to GPO)
Has anyone experienced this kind of problem in his/her enterprise environment? Can somebody from Adobe verify this and give us some advice about how to proceed in order to deploy 8.2.2 to our enterprise base? We've temporarily reverted to previous version but of course we need to find a solution.
We're also thinking about moving to 9.x release but we're not sure that the problem is not present in that version too.
thanks in advance

I applied the 8.2.2 reader patch to an 8.2.0 ITA Reader AIP created via command mentioned by you (i.e. with the /qb switch) and installed it on my machine.
Could not reproduce the issue you have mentioned and I am able to view FDF files without any problem (they are not blank).
There's something else that's causing this problem. It would be helpful if you could provide the MSI log of the installation.
To enable MSI logging on your system set the registry key:
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Installer\]
"Logging"="voicewarmupx"

Search Service Application problems after upgrading from Foundation to Enterprise edition of SharePoint 2013

Hi all. I have been searching for days for a solution to a problem I am having with SP2013 Enterprise edition.
We recently upgraded from SP2013 Foundation to SP2013 Enterprise. After the upgrade, the search services are no longer working and we are receiving many application log entries indicating the following:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Technical Support Details:
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
as well as:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
I have tried to remove the search service application and recreate it, and even though the SharePoint Central Administration states that it was created successfully, I am still getting the same errors in the log. If I go to the Search Service Application
Search Administration page, the "System Status" shows the following message:
The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '0359af35-0982-4ede-8838-b1d390e915bf' in search application 'Search Service Application' is in a good state and
try again
Additionally, under the "Search Application Topology" section, it states "Unable to retrieve topology component health states. This may be because the admin component is not up and running" which I assume is normal if the admin is not
running.
Does anyone know how I can resolve this problem?
Thanks!

Hi Joaquin,
According to your description, the error occurred when you re-created the Search Service Application.
Based on the error message, I recommend to verify the things below:
   1. Check if the association between the Search Service Application proxy and the web application is configured.
Please go to Central Administration > Application Management > Configured service application associations > Click Default to see if the Search Service application is checked.
   2. Change the app pool for the Search Service Application to SharePoint Web Services Default in the properties of the Search Service Application.
Please go to Central Administration > Application Management > Manage service applications > Highlight the Search Service Application > Click Properties in the ribbon > Change
the two app pool to SharePoint Web Services Default: App Pool For Search Admin Web Service and Application Pool for Search Query and Site Settings Web Service.
    3. Run PS command to check if the search admin timer job is enabled: Get-SPTimerJob
job-application-server-admin-service | fl. If it is not enabled, use PS command to enabled it and then reset Internet Information Services: Enable-SPTimerJob job-application-server-admin-service.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Create new site collection but page cannot be dislayed

Hi all,
im pretty new when it comes to Sharepoint.So far installation was successfull and i can access central administration page.
I then changed Alternate access mapping from http://intra01/ (intra01 was probably addes,since computer has this name during setup) to http://intra
When i click the link,i only get this page cannot be displayed.
When i created two new site collections,it is shown as http://intra/sites/main (where main was the name i gave for first site collection).
When i click the link,i only get this page cannot be displayed.Same is for 2nd site i created.
When i change Alternate access mapping for Central administration,this also fails and gives me page cannot be displayed.If i instead enter intra01,then i can access central administration.This does not work for the 2 site collection i created.
What have i missed?
thanks!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

Hi
let me split the issue
<<I then changed Alternate access mapping from http://intra01/ (intra01 was probably addes,since
computer has this name during setup) to http://intra>>
you are accessing your CA with http://intra1?
and next you are trying to access it using http://intra?
Did you installed CA on port 80?
Anyway, please check if you can resolve the new name used in AAM , intra.
If you can't please check your DNS configuration
Come back with results and details. thanks
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

Problems After Upgrading to New IOS (12.2.7a) With Passwords

Essentially, the title tells it all. After upgrading from 12.0.8 to 12.2.7a, our passwords wouldn't work. Is this because of a different encryption algorithm? We are using the service password-encryption command, and would like to keep it on during our installations.

We use TACACS, then local, but only after a site is in production.....but in this case, as this was a new turnup, we didn't apply TACACS yet.

Refresh table after creation of new Toplink BO

Hi,
i have the following Problem and i hope someone can help me. I use ADF11g/Taskflows with TopLink-mapped BOs (no ADF BC).
Consider following Taskflow(s):
main activity is a jsff-page (view) showing a table of BOs. From this view there are two action-outcomes defined called "edit" and "create". The edit-action calls another Taskflow constisting of one pageFragment showing the detailForm of the given BO. This Taskflow has one input and one output parameter (the BO to edit) and has two exists called "save" and "cancel". The add-Action calls a Method called "createNewBO" first and then calls the mentioned Taskflow also. Every Taskflow has ist own managed Bean in the pageFlowScope working as a Controller and DataControl for the TaskFlow and directly included views.
The edit-action works fine. The add action also except that the table from the default activity of the first taskflow does not refresh after return from the second Taskflow. I tried to set the Refresh-Property in the PageDef to all possible values in combination with the RefreshCondition but no combination works. I can make a manual refresh or change the sorting then the new BO is shown in the table.
Is there a possibility to call a refresh of a jsff from a taskflow or can i force the refresh on entering the jsff?
I'm really stuck and appreciate any help ;)
Friedrich

You can try this:
- on your taskflow diagram select the page that contains the table you want to refresh, and add a Page Parameter (from #{true} to #{viewScope.refresh})
- in pageDef for that page add one invokeAction in executables and point it to methodAction that fills the iterator you want to refresh
- for newly created invokeAction, set Refresh to ifNeeded and Refresh condition to #{viewScope.refresh}
This should refresh the iterator each time the page (fragment) is loaded.
Hope this helps!
Pedja

WPC Problem after creation of new Site - no "Edit Page" Link available

Similar Messages

Maybe you are looking for