WPMessages.properties

Greetings,
I am using IdM 5.5 and just went hunting for the WPMessages.properties file and can not find it. I have unjared the idm.jar file and have not found it there. Does anyone know where to find this file in 5.5?
Thank you,
Jason Burt

WHen you make a change to it, there is no need to re-add it to the jar file. Just place it in IdM's config directory.

Similar Messages

Re-name "AccountID" Field

How can I rename the "AccountID" field in IDM ?
As we all know, the "AccountID" attribute is part of IDM's own attribute-schema.
Here is how the "accountID" field is in my user form :
*<FieldRef name='accountId'>*
*<Property name='identityContents' value='true'/>*
*<Property name='checkWavesetId' value='true'/>*
*</FieldRef>*
However, I want to give it another name. Instead of accountID, I want to re-name into something else; forexample *"mycompanyID"*, or even *"UserID"*, etc, etc
I don't want to change any of its properties. The properties should stay the same (of course). I simply want to change the name.
Where can I do this?
Thanks

Michael,
the file you need is : WPMessage.properties
In this file, you need to modify the "_FM_ACCOUNT_ID" attribute.
However, this is NOT a good way to do it. It's never a good idea to mess with "jar" files.
A better way is to modify the *"_FM_ACCOUNT_ID"* field, which is located in the *"Default User Library"*.
In fact, another even better way, is to use Custom Message Catalog, to modify the "accountId" attribute.

Where are the ID and Password fields in End User Login ?

Hi:
I need to modifiy the ID / Password labels of the end-user login. I searched it in the WPMessages.properties, but i only find the variable UI_PWD_LABEL, and if i change it, it saw in the Admin Login but not in the User Login.
Any idea?
Thanks,
MJ.

Please tell us your first name and update your forum profile with it to help us. Thanks.
The first process sets a convenience cookie with the value the user entered in the username field. This is a session cookie. The code is all there. It has nothing to do with the topic of your post.
The Login process calls the apex login API. This performs authentication and does session registration and sets another cookie for session management.
Where usernames and passwords are stored depends on the type of authentication you have chosen and this is recorded in the Authentication Function attribute of the authentication scheme. For Application Express authentication, the account information is in the table wwv_flow_fnd_user. You might also use your own tables for this, or LDAP, or SSO, ...
Scott

Urgent-styles-help.css

Hi,
In the help options of IDM
i am trying to get rid of "To browse or search for information, click here."
I modified WPMessages.properties and removed the description. But it doesnt work.
ANy ideas on what file i ahve to modify and how i can modify
Really appreciate any help
Thanks,

First, you are running a VERY VERY old image.
You should really consider going to a 6.10 image.
Them, we do not have your config.
So, it's hard to say what could be the issue.
Finally, when the problem occurs, you should maybe get a sniffer trace to see what is going on.
Only a good understanding of the problem can give a good solution.
Gilles.

Disable Pass-through

Hi
I imported a big update.xml with pass-through authentication configuration ... Now I can't log in web admin console as configurator. How can I disable the great pass-through?
Big Thanks
JXXE

Hey JXEE,
This is in case still you haven't solved the passthrough, configurator login problem.
I once faced a similar situation, where when one of our administrators configured passthrough login. What he did was, while creating the "passthrough login module group", he added the "resource Login Module" to the "passthrough login module group" but removed the "Default Lighthouse Login Module" from the group. After that the users can login to IDM using the resource login password but configurator could not login at all as the "Default Lighthouse Login Module" was removed from the Login Module Group.
After trying so many options the only thing that worked for me was, preserving the IDM repository, which in this case MySQL, to preserve already created users, roles, resources etc. and then preserving WPMessages.properties, styles.css and images folder to preserve the customization and then reinstalling Sun IDM. By making the new IDM installation to point to the preserved repository and overwriting the new WPMessages.properties, Styles.css and images folder with the preserved WPMessages.properties, Styles.css and images folder I managed to restore the IDM properly.
Looks like you too have similar problem. Hope this procedure would work for you. One reminder though, you may want to create the problem in a test environment and try this remedy before you try it on your production.
Hope this would help.
Thanks,
SunCrazy

Suppress IDM error messages

IDM Community,
Does anyone know how to prevent displaying the IDM error messages (listed in the WPMessages.properties file) to an end user?
You can see the error message from the Admin interface, if you open an account of a user that has a resource not provisioned correctly (missing a required attribute: e.g. �Missing user attribute �userou� used in identity template for resource �AD�). An end user sees the same error from one of the links in the user interface.
I know I can change the text of the message by modifying the entry in the WPMessages.properties file. But what I am trying to do is to display the error to the admin � so he can fix the account, but not to an end user.
Any ideas?
Thanks!
Luda

Look like you are looking for a mechanism to reset the contents from model
You may need to try adding <af:resetActionListener/> as a child of the button whose immediate=true .More details - http://jobinesh.blogspot.com/2009/10/reset-content-of-web-page.html

How do I add multiple scripts from search engines to my meta tag properties?

I currently have copied the goolge script for website varification and analytics, etc and pasted it into my meta tag properties dialog box. There is no problem as far as Google varifying the page. However, I would like to copy Bing's search engine script into my meta tag in addition to Googles script. How do I go about doing this? Do I hit the return on my keyboard under the ending of Googles script, then paste in the Bing script?
The the last part of the Google script ending in this:
</script>
(paste new script from Bing here?)
Will this cancel out each other and cause problems?
Can someone walk me through this process, because Bing's search engine will not varify my site through two of the three other methods.
Ben

Adding a script after the closure of previous script is the way to go i.e. right after the </script> tag.
So it should look something like below:
<script>
Google's script
</script>
<script>
Bing's script
</script>
Cannot comment on one interfering with the other since it really depends on what exact code is there in the scripts. Google and Bing help resources will be able to help more with this.
Thanks,
Vikas

Error while accessing secure store: File "SecStore.properties" does not exi

Hi ,
I have a java desktop application, and i am trying to get a connection from a datasource deployed on one SAP AS Java, I can get the datasource succsfullly but when i try to get a connection from the DS, it throughs this exception, I put the secstore..properties file in the classpath even after that it is not happy,
any solution/hint/light please!!!!
com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "SecStore.properties" does not exist although it should..
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:106)
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:145)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:226)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:197)
     at com.sap.customcode.ConflictingActionFixture.(ConflictingActionFixture.java:53)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at java.lang.Class.newInstance0(Unknown Source)
     at java.lang.Class.newInstance(Unknown Source)
     at fit.FixtureClass.newInstance(Unknown Source)
     at fit.FixtureLoader.instantiateFixture(Unknown Source)
     at fit.FixtureLoader.instantiateFirstValidFixtureClass(Unknown Source)
     at fit.FixtureLoader.disgraceThenLoad(Unknown Source)
     at fit.Fixture.loadFixture(Unknown Source)
     at fit.Fixture.getLinkedFixtureWithArgs(Unknown Source)
     at fit.Fixture.doTables(Unknown Source)
     at fit.FitServer.process(Unknown Source)
     at fit.FitServer.run(Unknown Source)
     at fit.FitServer.main(Unknown Source)
Caused by: com.sap.security.core.server.secstorefs.FileMissingException: File "SecStore.properties" does not exist although it should.
     at com.sap.security.core.server.secstorefs.StorageHandler.openExistingStore(StorageHandler.java:372)
     at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1946)
     at com.sap.sql.connect.OpenSQLConnectInfo.getStore(OpenSQLConnectInfo.java:802)
     at com.sap.sql.connect.OpenSQLConnectInfo.lookup(OpenSQLConnectInfo.java:783)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:209)
     ... 18 more
caused by

the SecStore.key file was not there, I changed the passwd and checked the 'Encryption' on, after that my sever instance is not starting.
Any idea?
-Puneet

In Photoshop CC (2014), Hue/Saturation adjustment layer properties disappear

I am running Photoshop CC (2014) under Windows 7 Professional. The program is up to date.
Today, while editing an 8-bit image, I added a Hue/Saturation adjustment layer. Then, in the properties panel for this layer, with the on-image adjustment tool selected, I clicked a color in the image to get a range of colors whose saturation I wanted to adjust. Next, using the saturation slider in the properties panel, I increased the saturation of this range of colors. Finally, I closed the properties panel by clicking on the double arrow in the upper right corner.
Later, I wanted to modify this adjustment layer. I double-clicked on the layer thumbnail to reopen the properties panel, and found that, although the previous increase in saturation was still operating, the saturation slider was back at its default position, and the range of colors that I had previously established was gone. Thus, I could not make further adjustments to this range of colors.
I then did some further experimentation: I deleted the first Hue/Saturation adjustment layer, and created a new Hue/Saturation adjustment layer. I then again established a range of colors as above, again increased the saturation of these colors, and then again closed the properties panel by clicking on the double arrow in the upper right corner. This time, however, when I wanted to try to modify this adjustment layer, instead of double-clicking on the layer thumbnail to reopen the properties panel, I right-clicked on the layer and then clicked on "Edit adjustment..." This opened the properties panel, which, this time, correctly showed my original adjustments -- the saturation slider showed the positive adjustment that I had previously made, and the range of colors established earlier was still shown. But then, on a hunch, I added a Curves adjustment layer above the Hue/Saturation adjustment layer. Now, when I again opened the properties panel of the Hue/Saturation adjustment layer (by right-clicking on the layer and then clicking on "Edit adjustment..."), my previous settings were gone -- the saturation slider was at its default position and the range of colors was gone! (But the increase in saturation was still operating.)
Thus, it appears that there is a bug in the functioning of the properties panel of the Hue/Saturation layer: In short, once you have added a further adjustment layer, you can't then go back and make changes to the properties of the Hue/Saturation layer. I would be interested to hear if others have noticed this. Also, is Adobe planning to address this?

OK, I am not entirely sure I have understood your post completely, but when you edit a colour range with a Hue/Sat layer, and click off and back on again, it will default to showing the RGB values, which you may not have made any adjustment to. If you pick the previous colour from the image, or a similar colour, it _will_ show you the adjustments. So long as your picked colour is contained within the range of the previous adjustment.
Ypu could also use the RGB drop down (actually they call it Master nowadays), and chose the colour that is closest to your previously picked colour. I expect you are away that you can edit the colour range being operated on by dragging the four sliders on the two colour bars at the bottom of the Properties panel.
Does that make sense, or am I going in the wrong direction?

Program error when opening layer properties

Hi! I have a really difficult problem in Photoshop. Whenever I try to open the layer properties I get the error message "Could not complete your request because of a program error." I tried to fix it but I really don't know what to do. I am working on a huge project and I need this fixed as soon as possible. Thanks!

Please read this and proceed accordingly:
http://forums.adobe.com/thread/419981?tstart=0
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

ADF Custom properties overlay

Hi all
I want to put another one data in the same row in view mode in priview link http://tinypic.com/r/10e22wn/6 can see that in Edit form are showing both (Code & Date fields), but on View Form are only date in Custom properties i tried to RoDisplay: IllnessDate ,Code but then in view form showed only Code
Maybe someone can give some tips about overlay or how i can put the Code into view form in the same row
Jdeveloper-11.1.1.6.0
ADF Business Components 11.1.1.61.92
Thanks ! !
ID
Edited by: 1D10T on Nov 7, 2012 4:47 AM

Sucess
<CustomProperties>
<Property
Name="ShowCodeInRO"
Value="true"/>
</CustomProperties>
Maybe somewhere are some list with all custom Properties ?

File Properties: Document Kind... Where Does it Come From?

In Bridge's metadata subsection "File Properties", what exactly
is "Document Kind"? Is it synonymous with the file's mime type?
I've read through Adobe's XMP specification document (http://partners.adobe.com/public/developer/xmp/sdk/index.html) and I've seen many of Adobe's XMP schemas and data elements defined there, but I can't find where "Document Kind" is defined.
The closest I come is page 39 where the XMP specification notes that the dublin core schema has a property called "format" with a value of "MIMEType". Is "dc:format" synonymous with "file properties: document kind"?
Thanks for any help.

dont mind but please tell me how do u communicate with computer ports...
u can mail any material at [email protected]
thanks

Error reading properties file upon deployment

hi. i'm still relatively new with regards to the Java programming language. in any case... i am developing a simple project wherein the application has to make a database connection to a server. the application is finished already however.. i am having problems deploying it.
my project has a "resources" package containing the file "config.properties" which contains various information (connection details among others). correct me if im doing something wrong, but in deploying in, i copied the "dist" folder of my compiled code and then tried to run the java exe independently which resulted in an error. i already tried copying the "config.properties" file to the dist folder and even creating a "resources\config.properties" file but it still results in an error. could you please help me figure out how to deploy the application with the properties file. the code i used in referencing my .properties file is as follows:
Properties configFile = new Properties();
            configFile.load(this.getClass().getClassLoader().getResourceAsStream("Resources\\config.properties"));
            String username = configFile.getProperty("username");
            String password = configFile.getProperty("password");
            String url = configFile.getProperty("url");
            String dbtype = configFile.getProperty("dbtype");
            Class.forName(dbtype);
            conn = DriverManager.getConnection(url, username, password); thanks in advance. ^^

thank for the help mangst. i guess the IO approach is also applicable ^^; i changed my code to:
configFile.load( new FileInputStream( ".\\resources\\config.properties" ) );but i had a little trouble in debugging it since it starts the file search from the main project directory. however it works fine upon deployment. ^^; thanks again.
Edited by: xnofate on Sep 23, 2008 6:21 PM

Error reading Properties file

I have a main method which i am using to call a servlet located in the same Development Component. Until recently i had the servlet location hard coded and it was working without issues. Now i decided to make the location configurable. For this i created an sap.application.global.properties file in the EAR DC which contains the WAR of this DC.
The contents of the above file are as follows:
SAP application properties
SERVLET.LOCATION=http://<server-name>/ControllerServlet/servlet/com.nike.xapps.eqptsp.swem.controller.ControllerServlet
The code i am using in the main method to call this properties file and access the property is as follows:
Context ctx = new InitialContext();
ApplicationConfigHandlerFactory cfgHdlr = (ApplicationConfigHandlerFactory)ctx.lookup("ApplicationConfiguration");
Properties props = cfgHdlr.getApplicationProperties();
String servlet = props.getProperty("SERVLET.LOCATION");
contained in a try...catch block.
On dubugging i get a NoInitialContextException repeatedly in the statement where the lookup is performed.
These are all the additions i have made for reading this properties file. Does anyone know if there is anything more that needs to be done for this to work.
Thanks,
Murtaza.

thank for the help mangst. i guess the IO approach is also applicable ^^; i changed my code to:
configFile.load( new FileInputStream( ".\\resources\\config.properties" ) );but i had a little trouble in debugging it since it starts the file search from the main project directory. however it works fine upon deployment. ^^; thanks again.
Edited by: xnofate on Sep 23, 2008 6:21 PM

KM Task Scheduler: How to create custom/editable properties?

Dear All,
I created a KM Scheduler Task using the NDWS Wizard.
The application was successfully deployed and the task runs fine. However, I would like to define some custom properties that could be edited by using the portal, like the standard ones such as Priority, CM Systems, etc.
Is that possible?
I already tried to add it in the portalapp.xml, and also in the auto generated files that are in data and meta folders (..co.xml), but the new properties have not appeared in the screen.
Thanks in advance,
Marco

Hi Romano,
Thanks for the input.
Do you know in which of the .co.xml files should be added? There is one in "data" and another in "meta" folders.
The one in "data" folder (actually in one of the subfolders of "data folder") has the following content:
<?xml version="1.0" encoding="UTF-8" ?>
<Configurable configclass="domain.task">
<property name="name" value="domain.task" />
<property name="active" value="true" />
<property name="description" value="Task Test" />
</Configurable>
I added in this file a new property but no result.
The one in meta folder (also in a subfolder of it) has the following:
<ConfigClass name="domain.task" extends="SchedulerTask">
<attribute name="class" type="class" constant="domain.task"/>
</ConfigClass>
In this one when I tried to add a new property the task simple does not show, maybe I am not using the correct syntax.
Do you know in which of these files I should put the custom property and using which syntax?
Thanks in advance,
Marco

WPMessages.properties

Similar Messages

Maybe you are looking for