WPSM54G drivers won't install on Windows 7

I've just migrated to Windows 7 (Home Premium) and found that my WPSM54G driver(s) won't install. The installer error message is essentially: Windows 7 is not supported. Is there any way to override this behavior? My guess is that the driver(s) will work just fine, if they could only be installed. Alternatively, when is Linksys likely to fix the problem?
Solved!
Go to Solution.

This problem IS NOT solved by the above. Sure you can print with this option, but what about scanning and faxing? The WPSM54G is an ALL IN ONE sever and not just a print server. When is Linksys going to get updated software out? Why am I ALWAYS having issues with Linksys products that are software or firmware based.

Similar Messages

Multitouchpad drivers won't install with Windows XP and bootcamp

I just got a MacBook pro with the multitouch trackpad. I have repeatedly reinstalled the driver then told windows to rescan the system, it identifies the trackpad then says "a problem occurred during hardware installation" and the trackpad does nothing at all. I am using Windows XP Pro SP2 and the drivers on my Mac install disk for 10.6.4.

That would probably be what is wrong. All the drivers worked except the ethernet and touchpad. I guess I will be using the wireless and a mouse.

Boot Camp drivers won't install on Windows 7

I have a late 2011 MacBook Pro (10.10.2 Yosemite), and just installed Windows 7 (64-bit) via Boot Camp. It works fine but I am unable to install any of the drivers (version 5.1.5621). I put them on a flash drive but when I open Drivers/Apple/BootCamp, it says the program can not be run, check your bit version for compatibility (something like that)... I then try the troubleshoot way but this is what happens-
Thanks for the help.

Please verify that you have the correct drivers using System requirements to install Windows on your Mac via Boot Camp - Apple Support and install or repair using setup.exe in the BC folder.

Software and drivers won't install on windows 8.1!!

I have a new computer running windows 8.1. After downloading the printer software for my all in one C4580, the files extract but then nothing happens. I've run the scan doctor and the install wizard and the same thing happens with those downloads. Hence, I have no way to install the software. In task manager the setup.exe is running and using alot of CPU's and so I ended the task. Went through the download and all the "fixes" and still with no luck. I've tried connecting my printer with the USB cable to see if that might help. It didn't. Please, I need help!

Hello ithacagoddess
Welcome to the HP Forums!
I understand the software will not run once it extracts. I will do my best to assist you! I am going to provide numerous suggestions that could assist you.
Please complete all of your Windows Updates. Doing this could install, or repair, what is necessary to resolve the issue. Use these steps when installing your updates:
1. Open "Windows Update" in Control Panel.
2. Click "Settings", and then click "Install optional updates".
3. Next, click "Check for updates".
Next, I will have you install the latest redistributable package. This is the latest version and should be installed. This is very crucial towards the success of the installation. Please download and install if from this link: Visual C++ Redistributable Packages for Visual Studio 2013
There have been certain .dat files that have been known to cause this issue. They are HPOIN*.DAT and HPWINS*.DAT. Deleting whatever of these files exist could resolve the issue. To do this, go to the Charms Bar, then search and %WINDIR% and hit Enter. Once the %WINDIR% window is open, look for any files that state with HPOIN or HPWINS and delete them.
If you have McAfee Live Safe installed, this program might be causing the issue. This software directly interferes with our printer software. Disabling the entire program should be done. The Spyware Realtime Scanner is the particular function that causes these issues.
In addition to disabling that program, you can perform a clean boot to disable everything else that might cause an issue. Here are some instructions on how to do this: Performing a Clean Boot in Windows
At this point, I would try reinstalling the printer software. Please use the Printer Install Wizard when installing the software: HP Printer Install Wizard for Windows
Please respond to this post after you try everything! I do have additional troubleshooting to suggest if this fails. Thanks for choosing the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

The drivers won't install

The drivers won't install>Hi
I have a very old MP3 player which I recently started using again. It is around 5 or 6 years old and I think the model name is just Creative ZEN. The model number is DAP-HD005.
Following a hardware failure on my old PC a couple of months ago, I have recently got? a new PC, which runs on Windows 7 (64 bit). The old PC was about 5 years old and ran Windows XP. I have just tried to installm the software that came with the product on the installation disc but it won't load. I have also tried to find anything on theCreative site that will help, but nothing I have downloaded has so far solved the problem. I understand that the player is so old it is unlikely to be supported, but I wondered if there is some generic software that I have missed that I can install which will allow my PC to recognise the player.
Failing this, is gthere a way to make the player work with a Macbook? I tried to install the software on my wife's Macbook, but it wouldn't even try to run.
Any help greatly appreciated.
Thanks
Mark

You should be able to use compatabilty mode for XP to install this [url="http://support.creative.com/downloads/download.aspx?nDownloadId=00098">driver[/url]. It may freeze during the install & not progress but if it does & it lasts longer than 0mins exit it & reboot anyway. Then connect the player. Others have used this method & have been using their older players. I used this method on my Vista comp to install an older nomad player. Download the driver rightclick on the driver choose properties>compatabilty>Xp>then Ok. Then run the file & follow the instructions.

PC Suite 7.1.40.6 won't install on Windows 7 64-bi...

PC Suite 7.1.40.6 won't install on Windows 7 64-bit
Massage : Installation operation failed.
The Installation source for this product is not available. Verify that the source exists and that you can access it.

Please uninstall Pcsuite if you have already.
1. Uninstall PC Suite, PC Connectivity solution and Nokia Connectivity cable drivers from Add/remove
2. Run new PC Suite cleaner.
3. Install latest Pc Suite.
Download latest Pcsuite from website and try : http://europe.nokia.com/support/download-software/nokia-pc-suite
or you can try to install Nokia Ovisuite and continue your work. You can download from here: http://europe.nokia.com/support/download-software/ nokia-ovi-suite
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

HP OfficeJet J6410 won't install under Windows 8

Hello to you all,
Two days ago, I bought a new notebook for my daughter. She needs it for her study. It's the HP Pavilion TouchSmart 11-e000ed.
Again, just like the situation I wrote about before in this topic over here (link: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officet-J6410-won-t-install-under-Wind... the OfficeJet Printer J6410 won't install under Windows 8.
Now this is what I've done before the problem occured:
- I made a username and password for her,
- I activated Windows 8,
- I made a recovery-point,
- I took my external DVD writer, installed Office 2007 Home and Student for her (o.k, I know it's old, but it's very o.k - and legal copy -. for her study, used it myself as well and still do, and never any complaints about that one), and activated it,
After that and restarting the notebook;
- the notebeek activated USB 2.0 (it does that automatically at first use),
- installed XPS2OneNote (to use for Office OneNote 2007),
- installed SaveAsPDF&XPS,
- removed Norton Internet Security (I never use it, I use something else for that purpose, but was - and still am - planning to install that on a later moment),
- I made sure the notebook can access the server we have here at home, and made a share for her.
After that I used the OJ_AIO_J6400_Full_Win_WW_140_408.exe file (Dutch, but I'll translate the text in English).
From this point on I will describe as precisely as possible what happened
- - the program extracts some files, no problems there,
- - when the first screen appears, I pressed 'Install',
- - a bar appears, and after that another pop-up that says tha you must allow all HP processes. I pressed 'Next',
- - system is controlled, and after that one must agree with the licence agreements. I checked the box, and pressed 'Next',
- - the system is prepared for installation and - yes! - there it comes... an error message.
The error message says:
C:\users\<username of my daughter.\AppData\Local\Temp\7zS0FF0\Setup\de..
Please not that this is a different message than the one I got before, as I described in my posting before, (link again: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officet-J6410-won-t-install-under-Wind...
Nonehteless, I assumed that, as before, the problem was with the C+++, just like before. That is why I made the following steps:
- I used the OJ_AIO_J6400_140_408_Scrubber program, run L4 4 times.
- I looked for the KB2565063 update, but it isn't there anymore. So, instead, I ran all updates there are until the system said that there are no updates to be found,
- After that I took the old installation disk that came with the OfficeJet J6410 printer, and (tried to) ran hpsetup.exe. It doesn't do a thing! Literally!!
- after that I tried to run the the OJ_AIO_J6400_Full_Win_WW_140_408.exe file again. No success. I got the same error as before (see above, the ..\7zS0FF0\Setup\de.. thing again.
So, what to do now?
Anyone got some helpfull tips for me? I would really appreciate your feedback / help.
Thank you in advance,

Hi again,
No, it didn't work. And, the solution you offered neither.
This is what I've done.
After downloading the OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file, I tried to install it.
It failed. I got an error message similar to the one before.
'C:\users\<username of my daughter.\AppData\Local\Temp\7zS57DB\Setup\de.'
I tried to ran the scrubber again, and the CCCUninstaller and tried again.
Same error message occured.
After that I tried to look for the KB2565063 file again. Found it this time and ran the vcredist_x64 file.
I rebooted the system, tried to run the OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file again.
Same error message ocuured.
So, after that, I followed the steps you proposed.
Step 2 - searching for hpoins*.dat --> no results found.
Step 3 - searching for hpwins*.dat --> no results found.
Step 4 - I ran the Run Dialog box and typed MSIEXEC /REGSERVER (with AND without the extra space between ('MSIEXEC /REGSERVER') in the Dialog Box and pressed Ok.
Got an error message in Dutch:
'Kan het bestand MSIEXEC /REGSERVER niet vinden. Controleer of u de naam juist hebt ingevoerd en probeer het daarna opnieuw.
Translation: 'Can't find the file MSIEXEC /REGSERVER. Check if you typed the name correctly and try again'.
Step 5 - I ran the Run Dialog box and typed MSIEXEC /UNREGISTER (with AND without the extra space between ('MSIEXEC /UNREGISTER') in the Dialog Box and pressed Ok.
Got an error message in Dutch:
'Kan het bestand MSIEXEC /UNREGISTER niet vinden. Controleer of u de naam juist hebt ingevoerd en probeer het daarna opnieuw.
Translation: 'Can't find the file MSIEXEC /UNREGISTER. Check if you typed the name correctly and try again'.
So... conclusion: NOTHING worked.
My ideas for a possible solution didn't work, and neither did your ideas for a possible solution.
Reason why I want it to work is because of the HP Solution Center. If I can not install it with the software from the original installation disk, or the software that one can download from the HP site (the OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file that is), than I have no HP Solution Center. That would be a pity, for I am sure my daughter would really love the use and ease of the program, and would really use it a lot for her study.
What's next? What else can I try to solve the problem?
Got any more idea's or helpful hints?
Thanks in advance,

Indesign CS6 won't install on Windows 7 64bit via GPO

Good afternoon,
I created a installation of Indesign CS6 with application manager enterprise 3 to deploy to computers via the active directory.
It installs correctly without issue to Windows XP x86 machines however won't install to Windows 7 x64 machines.
When the computers starts it trys to install but fails and proceeds to the login screen. The following information is left in the Windows event log.
Has anyone else had this problem and more importantly know how to solve it?
Log Name:      System
Source:        Microsoft-Windows-GroupPolicy
Date:          13/08/2013 9:44:23 AM
Event ID:      1085
Task Category: None
Level:         Warning
Keywords:
User:          SYSTEM
Computer:      WIN7TEST
Description:
Windows failed to apply the Software Installation settings. Software Installation settings might have its own log file. Please click on the "More information" link.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" />
    <EventID>1085</EventID>
    <Version>0</Version>
    <Level>3</Level>
    <Task>0</Task>
    <Opcode>1</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2013-08-12T23:44:23.375831000Z" />
    <EventRecordID>9482</EventRecordID>
    <Correlation ActivityID="{B74A3709-81F6-4B73-AA1F-9B610874B7EA}" />
    <Execution ProcessID="384" ThreadID="1324" />
    <Channel>System</Channel>
    <Computer>WIN7TEST</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="SupportInfo1">1</Data>
    <Data Name="SupportInfo2">3961</Data>
    <Data Name="ProcessingMode">1</Data>
    <Data Name="ProcessingTimeInMilliseconds">41590</Data>
    <Data Name="ErrorCode">1603</Data>
    <Data Name="ErrorDescription">Fatal error during installation. </Data>
    <Data Name="DCName">\\AYR.burdekin.qld.gov.au</Data>
    <Data Name="ExtensionName">Software Installation</Data>
    <Data Name="ExtensionId">{c6dc5466-785a-11d2-84d0-00c04fb169f7}</Data>
</EventData>
</Event>
Log Name:      System
Source:        Application Management Group Policy
Date:          13/08/2013 9:44:23 AM
Event ID:      108
Task Category: None
Level:         Error
Keywords:      Classic
User:          SYSTEM
Computer:      WIN7TEST
Description:
Failed to apply changes to software installation settings. Software changes could not be applied. A previous log entry with details should exist. The error was : %%1603
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Management Group Policy" />
    <EventID Qualifiers="0">108</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-08-12T23:44:23.000000000Z" />
    <EventRecordID>9481</EventRecordID>
    <Channel>System</Channel>
    <Computer>WIN7TEST</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data>Software changes could not be applied. A previous log entry with details should exist.</Data>
    <Data>1603</Data>
</EventData>
</Event>
Log Name:      System
Source:        Application Management Group Policy
Date:          13/08/2013 9:44:23 AM
Event ID:      102
Task Category: None
Level:         Error
Keywords:      Classic
User:          SYSTEM
Computer:      WIN7TEST
Description:
The install of application Adobe InDesign CS6 from policy Global-Application-Adobe InDesign failed. The error was : %%1603
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Management Group Policy" />
    <EventID Qualifiers="0">102</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-08-12T23:44:23.000000000Z" />
    <EventRecordID>9479</EventRecordID>
    <Channel>System</Channel>
    <Computer>WIN7TEST</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data>Adobe InDesign CS6</Data>
    <Data>Global-Application-Adobe InDesign</Data>
    <Data>1603</Data>
</EventData>
</Event>

Hi Abhijit,
I am able to install InDesign CS6 manually on the machines from the CD/DVD however when trying to install it via GPO or running the msi using the msi exec commands it doesn't install and leaves the above errors in the event log.
The installation was made using the same CD/DVD and the installation works on the Windows XP clients and software other than InDesign CS6 will install to the Win 7 64-bit machines via GPO.
Cheers,

RSAT won't install on Windows 8.1 Pro - "The system cannot find the file specified."

Please help. RSAT won't install on Windows 8.1 Pro. Every time I try, I get the same error - "The system cannot find the file specified.". I really don't want to have to refresh the PC to get it working! I've installed the update successfully on
a fresh win 8.1 enterprise install on a Hyper-V VM.
I am in uk, so have installed the en-US language pack first. I did have a windows component store corruption but I've managed to fix that.
event log says:
Windows update "Update for Windows (KB2693643)" could not be installed because of error 2147942402 "The system cannot find the file specified." (Command line: ""C:\Windows\system32\wusa.exe"
"C:\RSAT Windows8.1-KB2693643-x64.msu" ")
CBS log (C:\Windows\Logs\CBS\CBS.log): http://1drv.ms/19CAv14

As Roger Lu reported, the log indicates that there is corruption in the update files that you downloaded. The log actually reports “file not found”, so you may also want to check permissions on the extracted files in C:\Windows\SoftwareDistribution\Download\76ecaa86ec6712300c2d71cbcdad378c\.
You can also re-try downloading the files to see if your original download was just corrupt.
Bruce Wooding Windows Outreach Team- IT Pro Windows for IT Pros on TechNet
It was a permissions issue! Thanks so much Bruce!
I checked the permissions for the folder mentioned above and TrustedInstaller only had List Folder Contents and Special Permissions. So I granted granted Read & Execute to TrustedInstaller and tried installing again...
1) double clicked the installer.
2) once it said Initialisation was complete, I checked the permissions again and it had re-set them to as before, so I granted Read & Execute to TrustedInstaller again
3) Installation was successful.
Not really sure why this happened as it doesn't make sense but it's working now :-)

Photosmart C4680 software won't install in Windows 8.1 64 bit

Photosmart C4680 software won't install in Windows 8.1 64 bit. The installer starts, then never does anything. I see it in Task Manager consuming resources forever:
Here is the version I am trying to run:

Hey!
Sorry for the drop-off from the thread, I must have missed your response, I apologize.
When it comes down to the actual installation and issues revolving around that; it is no longer an HP printer issue. It is an MSI (Microsoft Installer) issue.
For MSI support, I recommend for you to call Microsoft Technical Support at 1-800-642-7676.
Best of luck and let me know the outcome if you think of it. Have a great day!
I worked for HP.

Flash player won't install in windows 7

Flash player won't install in windows 7
This is what I get when trying to use "FLASH PLAYER HELP", as you can see, my flash player and OS are NOT listed and when asked on left side of screen if "THIS WAS HELPFUL", I clicked NO and could not complete my response.
HOW DO I FIX THIS??? THERE ARE SEVERAL ITEMS THAT REQUIRE FLASH PLAYER & I CANNOT GET IT TO WORK. AFTER DOWNLOADING (AT LEAST4 TIMES) IT SAYS EVERYTIME "INSTALLATION SUCCESSFUL"

Download the offline installer from http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header and save it to disk, then close all browser windows and run the downloaded installer.
If you still have problems, please post the contents of the FlashInstall.log file in
C:\Windows\system32\Macromed\Flash
C:\Windows\syswow64\Macromed\Flash
[topic moved to Flash Player forum]

CF 7.02 won't install ond Windows Server Enterprise 2003, Service Pack 1, IIS 6.0

CF 7.02 won't install on Windows Server Enterprise 2003,
Service Pack 1, IIS 6.0. When I run the Administrator the message
indicates that MX has been installed but when I open the page with
the web browser the message is Service Unavailable.

I get the message when I open try to load ColdFusion
Administrator page or the index page on the cold fusion web site
that I am installing.

Windows Boot camp drivers won't install

So I'm trying to put windows on my mac again, for the fifth time since windows won't let me activate it anymore. Everything goes fine and it installs and I put the Mac os x install disc 1 in to install the drivers. It loads up and goes through the process of installing the drivers. Once its down it asks me to restart the computer which I do. Once I get in however, none of the drivers are installed like nothing ever happened. I can tell because I can't get internet and the trackpad won't work properly. The boot camp faq shows up and another window to update something shows up but it need the internet to work. I go and try to repair the drivers and it runs its course, restarts and still nothing! No drivers. I've tried deleting the drivers and reinstalling them, removing the partition and reinstalling but nothing is working. I've gotten the drivers just fine before but now they just won't install. I've updated my mac from 10.6.4 to 10.6.7 so can that be the problem? Its the only thing I did different.

I'm at my office at the moment and I don't have the disc to view. Tell me, have you found the drivers folder? You can select any driver and it should automatically open boot camp and install all "Apple Drivers" while in windows mode. Then after installing bootcamp, you can install Apple updater. I'm adding more than I should because I don't know how far along you are- if you look around the clock area in windows, you should see a boot camp icon; is it there?
Send me a screen shot with your disc open and I can maybe help you from there. [email protected] Otherwise, I will look at the direct path this evening and post the info here.

Pavilion dv9812us - Windows XP reinstall / nForce drivers won't install

I had a funky virus on my Pavilion so I decided I would format and reinstall XP (my computer came with Vista but I'm not really a fan). I see an nVidia splashscreen come and go and then the installshield wizard comes up and loads the installation files... and then disappears. As far as I can tell, the installer crashes every single time I load it. I also tried downloading the unified drivers from nVidia's website, and the same thing happened. So my question is, how can I get these drivers to work? I really need to get my computer working because it is an integral part of my job... so double thanks in advance to anyone willing to help me on this.
Here are the specs:
Product Number KN876UA#ABA
Microprocessor 2.00 GHz AMD Turion 64 X2 Dual-Core Mobile Technology TL-60
Microprocessor Cache 512KB+512KB L2 Cache
Memory 3072 MB
Memory Max Up to 4GB DDR2 (Up to 1 GB may not be available due to 32-bit operating system resource requirements)
Video Graphics NVIDIA GeForce Go 7150M
Video Memory Up to 1071 MB
Hard Drive 250 GB (5400 rpm)
Multimedia Drive LightScribe Super Multi 8X DVD±R/RW with Double Layer Support
Display 17.0" WXGA+ High-Definition BrightView Widescreen Display (1440 x 900)
Fax/Modem High speed 56K modem
Network Card Integrated 10/100 Ethernet LAN
Wireless Connectivity Wireless LAN 802.11a/b/g/n
Sound Altec Lansing speakers
Keyboard 101-key compatible
Pointing Device Touch Pad with dedicated vertical and horizontal Scroll Up/Down pad
PC Card Slots
One ExpressCard/54 slot (also supports ExpressCard/34)
External Ports
5-in-1 integrated Digital Media Reader for Secure Digital cards, MultiMedia cards, Memory Stick, Memory Stick Pro, or xD Picture cards
4 Universal Serial Bus USB 2.0
1 VGA (15-pin)
1 RJ-11 (modem)
1 TV-Out (S-video)
1 RJ -45 (LAN)
2 headphone-out
1 microphone-in
1 notebook expansion port 3
1 IEEE 1394 Firewire (4-pin)
1 Consumer IR
Dimensions 15.16 (L) X 11.22" (W) X 1.65"(H)
Weight 7.7lbs
Security
Kensington MicroSaver lock slot
Power-on password
Accepts 3rd party security lock devices
Power
65 W AC Adapter
8-cell Lithium-Ion (Li-Ion)
What's In The Box
HP Pavilion WebCam with Integrated Microphone
Mobile Stereo Earbud Headphones (1 pair)
HP Mobile Remote Control

OK, I booted into safe mode, removed the old VIA drivers from the %systemroot%\system32\drivers folder, and then saw that the nForce2 drivers from a previous install were in Add & Remove Programs. I believe that to be my entire problem. So I uninstalled all NVIDIA drivers. Rebooted into Safe Mode. Installed all the 5.10 drivers with success, excluding the sound driver cuz I don't need it. Rebooted. Windows hangs during loading screen. Reset, then I hit F8 and choose Last Known Good Configuration. Remove all NVIDIA drivers again. Reboot into Safe Mode. Install one driver at a time and reboot inbetween. System hangs because of the IDE driver. So, choose Last Known Good Configuration again, uninstall all NVIDIA drivers, reboot to Safe Mode, reinstall all drivers but IDE, then boot Windows normally. Needed to install display driver, as I have a NVIDIA card. Did that, disabled nwiz and NvMcTray in msconfig as I always do. Reboot. My SYSTEM registry hive is corrupted. So after wiping Linux (which I never use anyway cuz my modem is not Linux compatible) off my other drive and installing Windows and the Internet on it, I found out how to take the registry from a previous Restore Point and copy it to the config folder. Did that, booted to that drive, had to uninstall and reinstall all NVIDIA drivers again, but it works now. I don't have tons of System devices like you Fredrik, but I do have 3 Motherboard resources, which is weird. Whatever. Thanks for all your help, guys

Bootcamp 2.1 won't install on Windows 7 64bit

I downloaded the 64bit Bootcamp and tried to install on Windows 7 64bit Retail Edition (RTM) and Bootcamp won't run. I tried compatability mode for Windows Vista 64 bit with and without SP2.
I need sound drivers. Everything else works on my Mac.
HELP

Install RealTek drivers for sound.
Maybe the 2.0.x Boot Camp drivers didn't get installed. You have to have those first.
Also.... 2.1 is OLD as the hills and was only for SP3 really, nothing there to improve on W7 or Vista SP1/2.

WPSM54G drivers won't install on Windows 7

Similar Messages

Maybe you are looking for