WPSM54G won't reconnect after printer being shut off and back on.

I have a HP Deskjet 2510. It prints well untill I turn the printer off and got to use it the next time. When I turn it on the USB light on the router doesn't even light up. I have to unplug it and plug it back in then it works fine untill next time. The printer is hooked up thru an ethernet connection for 1 computer and wirelessly for another. Same problem with both computers. Any help?
Solved!
Go to Solution.

whetsel.m wrote:
Uninstalled and reinstalled software for both the new printer and printserver. Still same problem. Printserver won't automatically connect when printer is turned back on. Removed Ethernet cable from print server. Still same problem.
It might be firmware is already old. Make sure printserver’s firmware is updated. Reset and reconfigure.
Title: Upgrading the firmware of a WPSM54G Article ID: 17164http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=de1a87fe3d624ce780f2c804de247ac4_17164.xml&pid=80&...
Title: Setting-Up the PrintServer Article ID: 5032http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=59c0e1ff7adc408094106ce4f8688902_5032.xml&pid=80&r...

Similar Messages

TS2771 My ipod touch 4g doesn't work i didnt have charger at first and when my cousins came over i charged it with his it was full and the next minute it was empty. it gave me the warning sign. After tht it shut off and i ot my charger today and it wont t

My ipod touch 4g doesn't work i didnt have charger at first and when my cousins came over i charged it with his it was full and the next minute it was empty. it gave me the warning sign. After tht it shut off and i ot my charger today and it wont turn on it also gave me a blue light which was kinda like an electric shock. Someone help plz

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My iphone4 got wet and was working right after but I shut off and have in bowl of rice by dehumidifier. But now it only turns on when plugged in. If I take to an Apple store will they be able to tell me if it's salvageable ?

My iphone4 got wet and was working right after but I shut off and have in bowl of rice by dehumidifier. But now it only turns on when plugged in. If I take to an Apple store will they be able to tell me if it's salvageable ?

Apple will not attempt to salvage it. They will offer you a replacement iPhone 4 for $149.

Upgaded ios on 3gs to ios 6.0. Manual connect to wifi and works. Will not reconnect after the phone shuts off unless I do it manually. The old ios would. Suggestions??

Upgraded ios on iphone 3GS to ios 6.0. I manually connected to the wifi and it works. After the phone shuts off, it will not connect back to wifi when it turns on unless I reconnect manually again. I have the "Ask to join Networks" button turned on. Frustrating and could get expensive if I forget and start using ATT data. Suggestions??

Settings, Reset, Reset Network Settings. Then attempt to connect again. Passwords will be deleted when you do this, so it will ask for the password again. After that, see if it will connect.

While printing on my canon MX892 it shut off and will not come on even after checking plug ins.

While my canon MX892 was printing it shut down and will not turn back on. What could have happened to cause this problem?

Hi Painter6, Please follow these steps to resolve this issue: 1. Please confirm other devices plugged into the electrical outlet power on. At this time, please do not disconnect the printer at the electrical outlet. If there is an empty electrical slot, plug in a lamp to make sure the outlet is working. 2. Disconnect the power cord completely at the back of the printer. 3. Please push the power cord back into the receptacle ensuring that the cord is pushed in as far as it will go. 4. Pull the cord and see if it easily slips out from the connector or if it seems secure. 5. If the machine does not power on automatically, press the ON/OFF button. 6. If the machine does not power on after the power cord was pushed in all the way at the back of the printer and the ON/OFF button was pressed, please unplug the power cord from the machine and leave it unplugged for no less than 20 minutes. 7. Please then reconnect the power cord, ensuring that the cord is pushed in as far as it will go. 8. Press the ON/OFF button. If your PIXMA MX892 does not power on, it is recommended that you contact live technical support . There is NO charge for this call. Real time feedback of a live technical support call would be very beneficial in this case.
Please dial 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays). A Canon technical support representative will be able to resolve this issue faster.

After upgrading to mavericks my mac shut off and won't come back on

I upgraded to Mavericks and my 2013 macbook pro shut off and won't come back on. When I push the start button I can hear the chime and then my sleep light blinks really fast and then shuts off completely. All I get is a white screen with the loading circle just going around and around. I tried resetting the pram but that didn't work. Any ideas?

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

HT1339 After I disconnect from my PC, my iPod nano shuts off and won't come back on? How do I fix this?

When I disconnect from my PC, my nano shuts off and won't come back on. I have tried holding down both the On/Off and the Home buttons -- but nothing...

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Why does the EEvents message come up every time the computer is opened after being shut off?

Why does the EEvents message come up every time the computer is opened after being shut off?

You need to check the software you run.
Some officially supported and sold Mac versions of software use Wine for porting in some fashion or another. If some program you are running is spawning these Wine processes, its probably buggy and not shutting down correctly.
How to figure out which are Wine and which are not...?
Well if its a Cider ported game, you just see if there is a Cider logo on the game.
If its Wineskin ported, theres no super easy way to tell, depending on how much its been modified, but you can look inside the app (right click and "Show Package Contents") and go to Contents/MacOS and see if Wineskin executable is in there. Unless its a very old version of Wineskin it shouldn't be able to hang like that without major issues int he Windows software running in it, and I don't know any any company would release it if it was that buggy.
If its WineBottler Ported, you'll notice quickly because it launches X11 and runs the windows under X11... of course not all X11 apps are Wine, but if you have a program that launches and runs in X11.app then you can look inside it at Contents/MacOS to see if its Wine related.
It could also be Crossover, or a Crossover port of software... you'd have to dig around inside of its app too to see if it looked like one of those.

My IMac 21.5 mid 2010's HD is going bad on it, after upgrading to mavericks it slowed way down and after it shut off and now won't come back on, would Seagate Barracuda ST2000DM001 2TB Serial ATA Hard Drive - 7200RPM, 64MB, SATA 6Gb/s worked?

My IMac 21.5 mid 2010's HD is going bad on it, after upgrading to mavericks it slowed way down and after it shut off and now won't come back on, I call apple support and they told me to bring it in but the nearest store is about two hours away. They said I need it to erase my hard drive but I have too many family pics on it.
would Seagate Barracuda ST2000DM001 2TB Serial ATA Hard Drive - 7200RPM, 64MB, SATA 6Gb/s worked on it? I could replace the internal and get an enclosure for the original until I get the pics out of it?
Please advise, it's like five years of family pics I don't wanna loose them and I am worried.
Thanks
Al Florez

A Brody,
I really apprecate your very quick respond, Its too late to back up as of now, my hard drive wont load at all so I cannot follow your instruction to back it up. Learn a hard lesson but I will from now on following your link.
Also my hard drive it is not available to do the free exchange program.
I read the OWC instruction on how to replace the drive I was just wondering if the 2TB would work on it instead of the 1 TB they offer, I specifically asked for the Seage Barracuda because I had great experiences with it on PCs.
Again, Thank you

New (3mo) macbook air screen goes black and sometimes won't come back on after I unplug it from the power cord. Any ideas why it is doing this? Sometimes I have to hold power button for 10 seconds for it to shut off then back on.

New (3mo) macbook air screen goes black and sometimes won't come back on after I unplug it from the power cord. Any ideas why it is doing this? Sometimes I have to hold power button for 10 seconds for it to shut off then back on. Sometimes holding the power button for a second is enough for it to come back on.

I took it to the Genius Bar, and they identified it as a hardware issue. Just got it back today. Parts replaced were:
620-5629 Display Module — Symptom: Distored/blurred/focus video issue
605-3284 Top Case with Keyboard — Symptom: specific key(s) do not work
So far so good. I'd suggest taking it in and not trying to work around it — it's a rare hardware issue (given the number of threads about it) and should be replaced.

My ipod shuffle won't charge after not being charged for a month... did the battery officially died?

my ipod shuffle won't charge after not being charged for a month... did the battery officially die?

maybe you can control the room temperature.... i try to charge iPod shuffle beside the mini fan, so heat from shuffle can blown away... or maybe, you can charge the iPod in Air Conditioned room....
i think this device have a mechanism to cut off the charging process if device temperature too hot. such a safety system so this ipod won't burn out when overcharging.
i hope it can help you...
and trust me IT WORKS....

Iphone 5 randomly shut off and won't come back on

For the last few weeks my iphone 5 has been randomly shutting off. Usually when this happens I just hold down the power and home buttons and my phone reboots within a few seconds. However last night my phone shut off and will not turn back on no matter what I try. It doesn't respond at all when I plug it into the charger and the screen has been completely black the whole time. When I plug it into my computer Itunes starts up and a message pops up saying that Itunes has detected a phone in recovery mode and I must restore it before it can be used with Itunes. I tried to restore my phone earlier, but it got stuck on 'waiting for itunes' and my phone displayed the apple logo and status bar that would not load at all. My phone is now back to being completely black and unresponsive. PLEASE HELP this phone isn't even 6 months old. I am on vacation currently and really need to get my phone working as soon as possible. Thanks!

I followed the steps found here: Error 4005 fix for Windows 7
it actually brought my phone to life .. sort of .. I now actually see an Apple logo on the iPhone screen (before this it was just a black screen at all times, no matter what) and it has a progress bar under it. Only thing is nothing happens after this. It's just stationary.
My iTunes just says Waiting for iPhone while my iPhone is just stuck with an Apple logo and a loading bar below that doesn't progress.
Edit: After doing some Googling it seems like I have the exact same issue as this person https://discussions.apple.com/thread/6431899

I have an ipod touch that continues to have a black screen with the white apple on it. It won't shut off and is completely frozen. This happened when we tried to restore it last night. Help please!!

I have an ipod touch that continues to have a black screen with the white apple on it. It won't shut off and is completely frozen. This happened when we tried to restore it last night. Help please!!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Hi. yesterday my iphone 4 told me it was "updating" after i had accidentally clicked on something. i was trying to study for a test, and it just poped up and i accaditally clicked it without getting to read it. it then shut off and the screen showed th

^Hi. yesterday, after trying to study on my iphone 4, i accidentally clicked okay on something that poped up while flipping through notecards. it told me that it was "updating", i had my phone updated to ios7 but not 7.0.2.. i tried to shut if off to see if it would stop the update, because i didnt want it to do that. after a few minutes i turned it back on and it was still updating. it then shut off and a screen poped up telling me to plug my phone into iturnes. itunes recognized my phone and said it was in recovery mode and i would have to restore it. i have tried to restore it three times and nothing has happened. it will go all the way through the restore process, say it is finished, and then nothing will happen. my phone will not stay in DFU mode, i have tried for 20 minutes to get it to. i have even uninstalled and reinstalled itunes. i dont know what to do and i have been without a phone for alomost 24 hours. how do i get my phone back to normal? can i fix it or could at&t replace it? or do i have to take it to an apple store? Please help me.

Has your phone been jailbroken in the past? If yes, this could be a reason for not being able to finish the restore process.
If not, did you try to restore it on a different computer?
Also check these articles again:
iOS: Unable to update or restore
DFU Mode

IMac G5 shuts off and won't restart

Mac suddenly shuts off, and won't restart. Begins to boot, but shuts down again, sometimes after only a few seconds and before the chime, sometimes after 30 seconds, sometimes after several minutes. After many attempts, can sometimes get restarted. If I hold in the power button, I get a long tone, and then sometimes get a gray screen with Linux style text, and if I type mac-boot as prompted, it will usually reboot. Then its good for a day, or several days but eventually, will go off and I can't reliably get back to that gray screen with text.
Not a techie, or Linux fluent...just got there by accident.
Is there something I can do / reset / or replace to fix this? (Yes, I know the computer's old, but I'm not ready to go to the Intel chip and the expense of repurchasing all my software yet!!)
Thanks for any help.

I have the same 1.8 GHz iMAC G5, and had the same problem of the computer shutting off abruptly, and then not starting up - shutting down after the chime, or sometime during the start-up process (I don't know about the gray screen - never tried that). Eventually the computer just wouldn't turn on at all - now it's dead.
I found this Apple support article recently, which shows how to diagnose a dead iMac G5, to see whether the computer has a bad power supply or a bad logic board. It might be helpful - in my case, it points to a bad logic board. Maybe both are bad (?). The procedure is for a dead computer, but maybe it would show something in your case too.
http://support.apple.com/kb/HT2173
Good luck. I don't how much it would cost to put in a new logic board or power supply. I love the monitor on the G5 iMac (beautiful non-glossy), and I wish I knew of a way to use the monitor by itself.

WPSM54G won't reconnect after printer being shut off and back on.

Similar Messages

Maybe you are looking for