WPUTAB: Idoc segments are missing at receiver system

Hi ABAP Experts!
At Sender System (POS DM) and Receiver System (ECC), Idoc is successfully generated with 144 Segments.
Both at sender and receiver, status is in green color, status 53.
Now in Receiver System ECC, at WPER transaction, documents processed with Billing Document Number and Accounting Document Number.
Now at Receiver system ECC, out of 144 segments, I can find only 48 segments inside Accounting Document Number.
Very few Idocs have this type of issues.
What about the rest of the segments, suggest me the solution.
PFA Below.
With Regards,
Sudhir.

Similar Messages

  • Some segments are missing in the idocs for master data zdebmas

    hi guru's,
    can any one hlep me here we facing the probelumm
    some segments are missing in the idocs for master data zdebmas
    , there is some issue on the generation of the Site Master IDoc (Message type: ZDEBMAS, Basic type: DEBMAS06).
    This is using the SAP standard program (RBDMIDOC) which reads the Site master change pointers.
    There is  some segments below is missing in the IDoc:
    how to chcek this probelumm...

    hi
    i got the function module. it is  triggerig whne i do changepointer running.
    what ever changes i made only that segments are onlycomming in to the idoc. but remaing segments are not comming.
    my req is to show all segments  even if i do changes in one segmet fields  dont change theay have send to the interfece all athe segments.i ahve to do some enhancemetns for that
    can u plse help me the login  or any function module which will fill the alla the segmetns .

  • Idoc not found in the receiving system

    Hi Experts,
    In the sending system idoc status is 03 (Data passed to port OK), but in the receiving system the idoc is not there. How to rectify this error?
    Thanks & Regards,
    Soumya.

    Hi Soumya,
               Check the RFC connections, becoz in the sending system once the IDOC is sent the status becomes 03 it does not check whether the IDOC has sent to the received system, if there are any errors before sending the IDOC it will not send and the status will be 01, so check the RFC connections at sending and receiving systems.......
    Reward points if this helps............
    Regards,
    Ravi G

  • MM DELFOR IDoc segments are all at same level - no sub-segments.

    Greetings.
    I am trying for the first time to set up outbound releases (830) and JIT's (862) for MM Scheduling Agreements.  I want to make it as standard as possible and only use User Exits if necessary, so I am using Output Types LPH1 and LPJ1.
    In WE20, if I use Message Type DELFOR for LPH1 with Process Code ME14, the resulting IDoc is "flat" - i.e., all the segments are there, but they are all at the same level (0), so SAP stops processing with a syntax error saying that the segments which should be under their parent segments are missing.  I tried both DELFOR01 and DELFOR02 for the Basic Type.
    I discovered that I can us DELINS and make this work, so this is not an emergency.  But can someone tell me how to make DELFOR work?
    Thank you in advance.

    Hello Vikrama, thank you for your response.
    DELFOR is also a Message Type, which allows DELFOR01 and DELFOR02 as choices for the Basic Type in the IDoc Type block of the first Outbound parameter window in WE20.
    The description for DELFOR is "Delivery schedule for component supplier", which seems more appropriate than "Delivery schedule/JIT schedule" which is the description for DELINS.
    I think it would be more clear if you could use DELFOR when all you want is forecast schedules, and both DELFOR and DELJIT if you want both forecasts and JIT's.
    Thanks again,
    Dave

  • IDOC, segment status missing in outbound IDOC

    Hi,
    how to generate an IDOC MATMAS with SAP with the segment status EDI_DS40?
    Indeed, we need to transfer this idoc from SAP (ECC 6 EHP4) to an EAI (Synchrony).
    The Idoc need to be fulfilled with the control segment, the data segment and the status segment to be parsed by the EAI.
    The MATMAS message is generate by the transaction BD10 and send via a Transactional RFC port. We use SAP JCO 2.1.8.
    The segment is missing for all type of Idoc.
    Can you help me?
    thanks
    Xavier

    Hi,
    The systeme Synchrony pass all test  in SM59 (connection and unicode).
    the segment that is need by Synchrony is EDIDS, not EDIDC.
    Segment that are mandatory for Synchrony to receive IDOC via RFC with SAP JCO connector:
    Segment  EDI_DC40 (receive -> so OK)
    Segment EDI_DS40 (not send by SAP -> so KO)
    thanks
    Edit: Solve with the last update of synchrony.
    thanks
    Edited by: Xavier BOUCHET on Feb 16, 2010 10:10 AM

  • File to multiple IDOCs scenario with the same receiver system

    Hi guys,
    I have to design and implement the following scenario:
    I will receive one file with many lines (Records) with data for materials, quantities, operations etc..
    Based on the values of some fields of each line, I will have to create an IDOC for each material.
    For example:
    if operation type = "INSERT", and Labor = 001 then create 3 Idocs of type MBGMCR with movement types=101, 261,311 that have to be posted one after the other to the same receiver system.
    else if operation type = "INSERT", and Labor <> 001 then create an Idoc MBGMCR with movement type=311 and plant = 1001.
    else if operation type = "Delete", and Labor = 001 the created 3 Idocs MBGMCR with movement type=312, 262 1002 and post them serially to the same receiver system.
    else if operation type = "Delete", and Labor <> 001 the created 1 Idoc MBGMCR with movement type=312.
    All IDOCS are posted to the same SAP R/3 system. We do not care about the sequence, except for the cases where 3 IDOCS are created.
    I am trying to think of a good design in performance terms.
    It is obvious that I will need BPM for sure.
    I am thinking of creating a mapping program that will produce 4 message types for the different cases from the initial file and then create a different message mapping for each case from the message type to the IDOC.
    I am asking you if I have to include everything (mappings) in BPM with a "fork" step?
    Or shall I produce only the 4 message types and then post them to R/3 and execute the mappings in R/3?
    Best Regards
    Evaggelos

    hi,
    >>I am thinking of creating a mapping program that will produce 4 message types for the different cases from the initial file and then create a different message mapping for each case from the message type to the IDOC.
    To me this seems to be the right solution.
    here u will create different message mappings and write them sequentially in interface determination. the multi mapping will then be utilised in transformation step in BPM.
    thus if this is the only requirement there is no need of using a fork step.
    [reward if helpful]
    regards,
    latika.

  • ECC 6.0 -- BC 4.7.: IDoc fields are missing

    Hello,
    again I have a strange problem with connection ECC 6.0 and BC 4.7.
    When I send an IDoc from SAP system to the Business Connector the IDoc arrives and is routed to the flow service. However some fields of the IDoc are missing and some are only filled with fewer characters then originally sent.
    In SM 58 and WE02 there are no errors. Maybe it is a problem with Unicode? Technically there is no error in the error log of BC either. I really do not know where what else to check.
    Do you have any idea? Thank you very much for your help!

    Each SAP listener in BC has a metadata repository assigned. This can (but need not) be the same SAP system as where the idocs come from.
    So, if the clearing of the DDIC cache does not help, then you can check if this metadata repository gives back the correct information for the idoc type.
    Also, press "test Connection" and "Unicode test" in the SM59 in the SAP system. Is it a Unicode-System ? Set the correct flag then in SM59. Otherwise you will get strange metadata errors.
    CSY

  • IDOC Segments for an External FI system

    Hi,
    Can someone please tell me the IDoc segments (need structure) that are used to bring data into SAP from an external FI system.
    Thanks
    Salim

    Hi,
    As for as i know EANs  are not relevant to unit conversion. This is a number which uniquely identifies a material for a particular UoM.
    And regarding the numerator and denominator, check whether any logic is added in the corresponding segment which overwrites the value

  • IDOC Segment is missing in the IDOC even though I have populated values

    Hi Experts,
       I face a problem in the IDOC processing.
       I have a custom IDoc type with 2 segments in the same Hierarchy.
       In the Z program I populate both the segments and send the internal table to the MASTER_IDOC_DISTRIBUTE Fun.Module.
       When the IDOC is generated, I see the IDOC with only one segment and the 2nd segment is missing.
       When I debugged the program, I see the 2nd Segment also getting populated.
       Can you give some info that can resolve my issues.
    Thanks,
    Micheal

    Check the below points,
    1. Check the internal table IDOC_DATA in MASTER_IDOC_DISTRIBUTE in debug mode whether the segement with values are populated.
    2. Are you populating the parent & hierarchy level in segment, if yes check whether the values are right one.
    3. There may be a possiblity the std SAP code would delete the custom segment if its any syntax error in segment defenition.
    Check this and if you still have the issue come back.

  • Where will be the IDOC  data saved when the receiving system is not ready

    where will be the idoc data  saved  data when the receiving system is not ready

    Hi karthik,
    If the receiving system is not ready ,
    the data is to be transferred and function modules to be invoked are temporarily stored in tables ARFCSSTATE and ARFCSDATA. once the receiving system is ready , the entried in these tables wiil be deleted.
    regards,
    Prasad kodi.

  • Infopackages are missing after an system copy from Prodution to Quality

    Hi SAP Gurus,
    After an DB copy, from BW Prodution to Quality, the infopackages are missing.
    Can anyone can tell me how to get the infopackages from PRD to QAS.
    Thanks,
    Pedro Martins

    Hi
    Casue for package missing
    In some cases infopackages will be missing because of the INIT Delta infopackage will be copied againg from  Production were duplicates are created for the same Init. so in such cases the package will be missing
    During DB copy if any infopackage are created in production at that point of time the system will not take that package into consideration
    inorder to get the package we can do reverse transport (from production to Quality)
    follow the steps as below
    Transporting from BWP TO BWQ : Reverse Transports
    Step1
    Create request in Source System (Eg: BWP) say A and  Collect required objects (infopackage)into request A
    Step2
    Goto TCode : SE09/SE10 --> create a transport of Copies request B (give the user name and tick on transport copies just below the workbentch request)
    Step3
    Check, check box for Transport of Copies and click Create , now the system will prompt one more screen
    Step4
    Now choose Transports of Copies and continue.
    Step5
    Enter required Target system(F4 help available) Eg: BWQ.
    Step6
    Unlock Objects(Tcode : SE03) from Request A and Move Objects to Request B(Tcode SE10).
    Step7
    Delete objects from Request A
    Step8
    Relase the request B (se09)
    Step9
    Now log on to the Target System(Eg: BWQ) import Queue and import request.
    Step10
    In BWQ queue go to menu Request >Forward> give BWD or
    you can directly provide BWD as Target System in Step 2
    Step11
    Go to BWD and import the request.
    santosh

  • "the following themes, used by this project, are missing on your system"

    I continually get this error message, even though the theme in question is in
    Users/Shared/iDVD/Favorites/
    and
    my home/Library/App Support/iDVD/Installed favorites/
    anyone have any ideas?
    thanks

    I've got exactly the same problem. The behavior is this: if I save the project and then reopen it in iDVD6, then I don't get the error message. If I save he project, quit iDVD6 and then click on the project to open it from Finder, I get the error message.
    Is this the way yours behaves, too? Did you ever get a satisfactory answer or solution?
    I've also got the buttons set to NOT to snap to the grid, and although it lets me position them freely, when I reopen after I've closed the file they're back where they were before.
    Thanks.

  • Missing document items in Sales Order in the receiving system

    Hello.
    We're doing passing of message type ORDERS (ORDERS05) from one system to another. Idocs were posted successfully but we can't find the document items in the receiving system if we view a particular sales order in VA03. Document items are present in the sending system.
    I checked segment E1EDP01 (document items segment) for the inbound idocs and found all items attached to the sales order but we can't see them in VA03 display.
    Appreciate help on how to proceed/check this issue.
    Thanks. =)

    If you have verified that the IDOC was complete in the receiving system, I would use WE19 to copy the IDOC in the receiving system (or copy to a development instance of that system) and run the process in debug....someone will have to watch the process, I think and see what is happening to the VBAP table during sales order build.

  • IDOC Segment missing when reaching to ECC

    Hi,
         This is file-to-IDOC scenario. When file is loaded XI is picking and creating IDOC with all segments as expected in XI, but when reached to ECC sytem main header and item segments are missing.
    Refreshed cache, reloaded metadata in XI, did full system cache refresh but no luck.
    Checked in ECC thru IDOC_INBOUND_ASYNCHRONOUS function module to create IDOC and it did create successfully with all segments.
    Segments are missing only when coming from XI.  We are in SAP ECC 6.0 & PI 7.0. IDOC I am using is DELVRY03

    Hi Sriram,
    Can you please check this note which disucss about the same issue:
    Note 1170918 - IDoc adapter: Missing fields and deleted metadata
    Regards,
    ---Satish

  • IDOC Segment Definition received instead of Segment type

    Hello Folks,
    When i send a Z Idoc Segment from A to B System, It is successfull from A System, but in B System sometimes its erroringout because in the inbound idoc Segment Definition is coming instead of Segment type.
    For Example
    From A System I have sent Z1P0002 segment
            B System I have received Z2P0002000(Which is the segment definition for Segment type Z1P0002)
    Any inputs to above problem?

    Hi,
    The problem may be due to system B using a older release version of the IDoc. In those scenarios, even though your IDoc type is recognized, it may not be possible for the reciever to determine the right segment version of the reciever.
    There are options in the WE20 partner profile configuration, Field Segment release in IDoc type and Segment Appl. rel. which enable the partner system preventing from erroring out.
    BR/Yogesh
    Edited by: Yogesh Surender on Jun 1, 2009 12:34 PM

Maybe you are looking for