WR01_SAVESITEDATA used in retail site

hi
trying to use WR01 to create a site for the first time. Input selection is rather large, when I created a site and tried to view in wb02 I got the following message: "you are using a retail transaction. You selected a site not a retail site."
has anyone got experience how to enter the site data using this transaction or have an input template?
Or can this be used in retail? or is there is another retail transaction to use?

Hi Lynn,
it is definitely possible so please check the below note for more information;
1865903 - WR01_SAVESITEDATA module for site creation
There is also this very useful SCN post related to mass data maintenance in IS Retail.
Hope this helps!
Cheers,
Tomas

Similar Messages

I have lost track of the number of websites that do not work properly on the iPad without Adobe Flash player which is unsupported. I cannot use retail sites, billing sites and most important of all job application sites. All are missing tabs, links, info

I have lost track of the number of websites which do not work properly on my iPad. They include retail sites, billing sites and most important of all job application sites. They all seem to require Adobe Flash Player which cannot be downloaded onto an iPad. Skyfire does not solve the problem. They all load without vital parts of the site such as tabs, links and correct formatting. Any suggestions?

Most such brower/service combinations have a difficult time working with Flash-based apps and often fail completely. Flash videos are usually the most successful content these browers can handle. You can try the others apps - Puffin, iSwifter, etc - but you may find that none of them work, in which case you will not be able to use your iPad with these sites other than by using one of the various remote control solutions to take over a computer running the full Flash Player.
IMHO, any developer that built a Flash application for a billing or job application site was an idiot, but I know that's out of the control of anyone but the relevant company.
Regards.

IS-Retail: Site Creation Best Practice

Hi !
I have 3 basic questions on this topic:
1. In IS-Retail is a Site considered 'config' or 'master data'?
2. Do all sites need to exist in the golden config client, or is it sufficient to have only the DCs (and not the Stores) in it?
3. After go-live, is it ok to create new stores directly in production? (I hope the answer to this q is yes!)
Thanks,
Anisha.

Hi my answers for your qestions as follows
1) In IS Retail Site is a master data, but to create Site/DC/stores need to do some config in SPRO, Like...
Number ranges for Sites, Account groups, create DC and site profiles and assign account groups to them.
then you Create DC or site using WB01, now site master data will consider.
2) yes you should have all Sites in golden client ( i am not clear this questn)
3) After golive better need to create new stores on devleopment in then export (using WBTI/WBTE) to prodcution, in case any future changes requires to do something on stores like assign/delete merch category etc... you can do its easliy to aviod data mismatch in the production.
regards
satish

Retail Site and LSMW(BAPI or IDOC)

Hello,
I'm trying to upload retail site through LSMW but I can't find a method to do so. Online we use TCode WB01 to create a retail site and I don't want to create a BDC for it since it uses multiple screens. Does anyone know a method to do so? Thanks in advance!
Arash

if you know lsmw mwthod then you can upload site data.
but the question is why do u want upload site with lsmw.
site is a very imp master data in retail. so it will be good if you enter all these by using t-code wb01 manually.
regards
santosh jaiswal

HT201210 Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is do

Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
Thanks
Roger

Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
Thanks
Roger
[email protected]

I use a web site called ACRIS- up until yesterday I could access all parts of the site, including calling up images of deeds. Now I can no longer get the images via firefox, but can them via windows explorer. Why? How do I fix this?

I use a web site called ACRIS- it allows me to access NYC Finance dept records- specifically images of deeds. Up until yesterday I had no problem. Then without any apparent reason I could access all parts of the site, but could not access the deed images. First I thought it was a problem on their end, which sometimes happens, but after waiting 24 hours I was still having the problem. Then I tried windows explorer and it worked without any problem. How do I fix this?

Hi jeffbeal,
First question I would ask is what has changed recently? Did you add any new extensions or add-ons?
I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
Hopefully this helps!

I want to put windows 7 on my iMac. Do I use Windows 7, 64 bit System Builder or do I use a "retail copy" of the Windows 7, 64 bit ? Microsoft says I should use the System Builder copy. A technical support individual from Apple said use the "retail copy"

A Microsoft technical advisor said that the "retail copy" of Windows 7, 64 bit Home Premium would not work with Boot Camp to put the Windows operating system on the IMac. She said that I would have to use the System Builder copy of Windows 7 to put it on my iMac. An Apple technical advisor told me that I had to use the "retail copy" of Window 7 because that was the one used by Apple when they developed the Boot Camp program. I have also seen some articles from Apple that suggests that both copies of Windows 7 would work OK. Does anyone have any experience that shows which one or both I should purchase to put on my computer?

Welcome to ASC!
I used the 64-bit System Builder Edition when I bootcamped my 2010 iMac a couple of years ago. Worked perfectly--installed a very lean system. Without all the extra cr@pware that comes preinstalled on name-brand Win computers, the SBE OS actually works darned well.
However, that was under Mac OS 10.6.8 which remains on that computer for compatibilty reasons not related to Windows. Haven't BCed any newer Mac OS, so your mileage may vary.

Can In-Browser Editing be used on a site exported as html?

can In-Browser Editing be used on a site exported as html? (Local Intranet)
Thanks

Since In-Browser Editing is not able to connect to servers that are within local/private networks, the FTP host must be publicly available. Also, it will only work when published via "Upload to FTP Host..." which saves additional details needed for In-Browser Editing to function that "Export as HTML..." does not.

How can I see how often and where an image is used in the site?

Just realized the post appeared twice as at first sending I
got an error page (contains no data...).
So, please do all answer to the other post, so that all
replies get collected at one post only.
Hello,
please excuse my maybe dumb question but converting from
GoLive I am still trying to find several practical effective
workflow features in DW ...
1. where in the sitewindow/assets or files panel can I see an
indication at each image if and how often it is used in a site?
2. and where can I see/check on which pages it is used?
Thanks in advance for guiding me there ...
bye,
Beate

> How do DW users know how often and where an image is
used on the site
> then?
I'm not sure what the benefit is of knowing how often an
image is used, but
a search for the image by filename would do the trick.
And just so you'll know, this is a peer forum, not an
official communication
vehicle to Adobe. We are all just users here, not Adobe
employees.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"beatrice" <[email protected]> wrote in
message
news:[email protected]...
> OK. I sent the below feature request.
> How do DW users know how often and where an image is
used on the site
> then?
> always doing a find/search?
> in GoLive there was an simple window where all the files
a page consisted
> of
> were listed plus all the files that were pointing to
that page. such,
> without
> having to open a page links and image and componentes
etc. could be
> changed via
> point&shoot.
>
> Couldn't you all think of this a being great and helpful
and making site
> management easy? Then send in a feature request as well,
please.
>
> ...............
> How can one know by the assets or files list if an image
is used at all on
> the
> site?
> and how many times? and on which pages?
> This is very useful to know especially in larger sites.
> e.g. an image should get changed on one page, now it
would be very good to
> see
> if when it was used on other pages as well if it would
make still sense
> there
> when changed.
> as DW can update files (when e.g. an image name gets
changed) there is a
> way
> this is already recorded. why not take this records and
send this back
> into a
> list/column in the files panel to indicated that the
image is used and
> how
> many times.
> plus to have another window that can display all the
pages the image is
> used
> in.
> so one could click through all those pages and open them
to check the
> image
> there.
> in GoLive that feature was called 'In and Out links' and
one could see a
> page
> in the middle and left and right from it many
branches/lines at which ends
> the
> filenames were visible used in that page.
> so one e.g. could also point and shoot from this list
and change a file or
> image or component simply by point and shooting to the
files panel without
> having to open the pages.
> These features were so practical for an effective daily
workflow that I
> don't
> understand why they haven't been put into cool DW yet.
Please, please do
> so in
> the next release. I can test it thoroughly if you need
testers for it.
> bye,
> beate
>

SDN blog used by SCAM site

Hello SDN,
I wanted to share some interesting discovery I made recently. I was goggling for how to implement EDIFACT interface in SAP PI (Process Integrator). And found following site:
http://www.xmlconverters.com/customers/sap-review.html
I read it and found it quite useful, as it described almost full solution to what I need. Still there was one thing that confused me. They were offering to buy some sort of software for one thousand euros, that I sort of need. Still I could not see in solution how is this software exactly used.
Then i looked in SDN for solution and found this excellent blog:
/people/ricardoandres.maienza/blog/2007/04/06/edifact-to-xml--stylus-studio-solution
Guess what? That SCAM site has copied SDN blog and replaced:
In detail the objective of this web log is to describe how to process an EDIFACT message inside XI, using Stylus Studio solution.
with
In summary, the objective of this blog posting is to describe how to process an EDIFACT message inside SAP XI, using the DataDirect XML Converters solution.
to trick people buying their crap-ware.
So guys be careful !!!
Regards,
Reinis

Re: SDN blog on PI used by SCAM site
Posted: Apr 1, 2011 9:20 PM in response to: Farooq Farooqui
Edit Reply
http://www.truthlite.com/guest-post-debt-settlement-scams/trackback/
Hubert Devon and Alex Jensen are the guys on Bryce 'scam site here..
THERE COPY PASTE!

Due to the presence of characters known to be used in Cross Site Scripting

I am getting following error when I try to send single quote as part of URL. I tried javascript escape to encode the URL. But still getting same error. Does anybody know workaround for the issue. Thanks
Due to the presence of characters known to be used in Cross Site Scripting attacks, access is forbidden. This web site does not allow Urls which might include embedded HTML tags.
403: Access Forbidden
Your client is not allowed to access the requested object

FYI. We are using IIS Webserver and Weblogic Appserver.
When the page is accessed through Weblogic , cross site script does not occur. It happens when the page is rendered via IIS.

Why can't I seem to subscribe to Export PDF from outside N America? I'm using the Uk site...

Why can't I seem to subscribe to Export PDF from outside N America? I'm using the Uk site...

Hi Steve,
ExportPDF is definitely available in the United Kingdom. However, it's necessary that you have an Adobe ID, and credit card and billing address from the same country in which you're trying to purchase a subscription.
If you are using an email address (Adobe ID), and credit card/billing address from the United Kingdom, and are still unable to subscribe, please let us know and we'll take it from there. (And, if you're receiving an error message when you try to subscribe, let us know. That will help us figure out what's going wrong.)
Best,
Sara

How to use a web site for a camera

Is it possible to use a web site for a web cam so someone could watch me while we talk. What is the best software to sue for a web cam? I have the Ceative Web Cam NX.
Thanks

I would turn on the "show java console" and the "log output" options in the java console. You should then be able to see the reason the application will not start.
rykk

I cant get ECWID to work on my mobile devices, it only seems to use the desktop site rather that the Tablet or iPhone

I cant get ECWID to work on my mobile devices, it only seems to use the desktop site rather that the Tablet or iPhone? Can anyone help me?

Hi Jim,
We’ll be glad to help you.
Ecwid supports responsive layout, which means that the store pages can adapt to the visitor's screen width on the fly and keep the layout clean and nice. Your products and categories lists will be fit for any window's size, as Ecwid will calculate the most suitable number of products or categories in row automatically. In other words, Ecwid looks great on any mobile devices. You can check how your Ecwid store may look on smartphones and tablets, if you see your Starter Site (what it is).
However, if you want Ecwid reveals itself in all its glory, you should embed your Ecwid store into website, which also support responsive layout, because if the site doesn’t adapt to size screen, Ecwid is not able to determine how it should be changed since it’s just a part of the site.
We’ve checked your site and found that you used Adobe Muse for building your site. Using Adobe Muse, you can create alternate site layouts for web content to be displayed on desktop, smartphones, and tablets. Nonetheless, your site has a layout for desktops only, that’s why it looks the same on all devices. You can learn how to create those alternate layouts in Adobe Muse, by reading “Creating a Website for Mobile Devices” article.
I hope this helps! But if there are any questions, don’t hesitate to reach us out on Ecwid forums.

Can I use my retail CD to repair OEM version Win 7x64 HP

I want to repair (or reinstall if necessary) Windows 7 x64 Home Prem but it's oem
and I don't know how/etc that works, and I'm running out of time.
I have a retail CD I bought - same version Win 7 HP x64.
Any reason I can't use the retail CD to repair the oem ver?
Second, I don't have SP1, it was never offered by Windows Update (compatibility?).
Installing SP1 might achieve the same goal.
Should I avoid installing SP1 if it wasn't offered?

If its Windows 7 Home Premium RTM 64 bit, you won't be able to repair upgrade a Windows 7 Home Premium with SP1 installed. You should download an updated copy then attempt the repair upgrade:
Download the corresponding edition of Windows 7 you have a license for from the following link.
• Windows 7 Home Premium (x64)
- 64 bit
ImgBurn - In addtion to supporting the creation of CD's from .ISO files,
it supports a wide range of other image file formats, and it's free.
(BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
http://www.imgburn.com/
http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
Note: Always use the slowest burn speed (4x or 2x) if offered a choice.
How to do the repair upgrade:
http://notebooks.com/2011/08/30/how-to-do-a-windows-7-repair-upgrade/
Teching It Easy: With Windows |ActiveWin |
Notebooks |
Microsoft MVP

WR01_SAVESITEDATA used in retail site

Similar Messages

Maybe you are looking for