Wrap text options, are they really limited?

I was curious if there was a way to dial in precise NONuniform wrapping options.
I have a place holder box that I want the text to wrap around and give a 5pt space on all but the right side... I want that 20pts.
In the wrap text options it's all uniform.

You’ll have to edit the path to add 15 points to the right side. One simple way would be to copy it with a +15 point horizontal offset then merge the two paths with Pathfinder.

Similar Messages

Highlighting Tools for Text: Where Are They?

How do you highlight a text in pages like you do in word? In Word it's on the toolbar. You can use yellow, but have the option to use other colors as well. How do I activate this feature?
Thanks in advance!

Hello
Welcome to the club.
It seems that you missed something:
Pages is NOT Word so it is quite normal that some features are different and even than some available in W are missing in Pages as some missing in W are available in Pages.
About your question, you may search for the keyword "highlight" in the help or in the PDF User's guide as I did.
I got the responce but it's not too late to learn how to search by yourself
Yvan KOENIG (from FRANCE samedi 29 décembre 2007 19:38:43)

Imessages showing as delivered. Are they really being received

I am just curious as to if the person I am sending the message too, and they don't have the "read notification" turned on, if my messages are really going thru even though they say delivered? Does that make sense?

"Delivered" tells you that they were delivered to that Apple ID/phone number. It tells you nothing else. I have never had any reason to doubt the accuracy of "Delivered". If the person you're messaging doesn't want to turn read norification on, that's as much information as you're going to get.

Can't contact Adobe... Are they really that unprofessional?

I'm a Camtesia Studio User and I am looking at
converting over to Captivate. The software continually crashes on
me. It is a trial version that I have just downloaded. I understand
that things like this happen and I am not so upset about that. I am
however rather frustrated that I cannot seem to even send Adobe an
email about how to fix the problem.
Here is the problem...
The software crashes sometimes upon opening a new project.
The software crashes everytime upon ending a recording. In my
search I found another person with the same problem. One user
responded with suggestions. I followed those suggestions to no
avail. I have uninstalled the software... cleaned up my system and
reinstalled to no avail.
So I would think that my next course of action is to contact
Adobe and ask.... "How can I get your software to work?".
45 minutes of searching Adobe.com and I can't find anyway of
contacting them to ask such a basic question.
Am I missing something? Is Adobe really that
unprofessional?

The contact method has been supplied though I agree they
could make it
easier - one thing Adobe said they looked forward to with the
Macromedia
integration was the community relations Macromedia brought to
the table.
It seems that aspect of the integration hasn't been all that
successful
so far...
Anyway, Captivate crashes as you describe I would suspect
being a result
of video card issues. Try adjusting the Troubleshooting
slider (assuming
XP; Display Properties > Settings > Advanced >
Troubleshoot). Bringing
that down a notch or many may help the stability...though may
also
effect the quality of the captures.
HTH
Erik
westonweb wrote:
>
I'm a Camtesia Studio User and I am looking at
converting over to
> Captivate. The software continually crashes on me.
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware

Why is Keynote, Pages, Numbers, and iPhoto all under the free category in the app store but say they cost money? Are they really free? Should I download them?

HELP! I need these softwares for educational purposes ASAP! I'm not sure whether or not I should purchase any of them, due to the fact they are under the free category, yet if I click each app they all say to "buy now" for a certain price. This is questionable to me, and I am unsure what the real cost of them are before I attempt to make any purchases or not. If anyone could let me know soon please, that'd be great. Or if there are any other trust worthy sites for a free download that would be great too if you could just list the process THANK YOU! (:

All Apple computer come with the iLife suite of App totally free and they are installed on your Mac by the factory when it was built and shipped.
Those iLife apps are iPhoto, iMovie and GarageBand on Mac computers that came with any of the Download Only version of OS X, Lion Mt Lion and Mavericks and also include iDVD and iWeb on older Mac computers that came with OS X Snow Leopard or previous version of OS X.
If they are not already on your Mac then you can reinstall them from either the Mac App Store, for Mac's that came with Lion, Mt Lion or Mavericks, or from the Original System Reinstall DVD discs on older Mac that came with Snow Leopard or previous version of OS X.
You need to post what model year Mac you are using and whether or not you bought it new from Apple or an Autherised Apple reseller.
As for the iWork set of applications, Pages, Numbers and Keynote, those you need to buy from the Mac App Store unless you purchase your Mac New from Apple or an Authorized Apple reseller on or after October 21 2013.
So what model year Mac do you have and did you buy it new.

JDeveloper 3.1 and JDK1.2.2: are they REALLY compliant?

Hi,
I've already been developing in JDev 3.0 using Java 1.1.8 for a few months and have a number of EJB's deployed in an Oracle8i 8.1.5 database. These are accessed by a servlet which is called from a C++ application in order to populate the db tables. I'm using Java Webserver 2.0 and everything works fine.
I've been upgrading to Java 2 with JDev 3.1, Oracle 8i R2, and JDK1.2.2. Everything again works fine when I am testing and debugging in the JDev 3.1 IDE but when I deploy to the Web server, my context lookup for the EJB published name freezes, returns an error status to the C++ app but does not display any error/exception msgs in the server console/log files.
On investigating I found that the java.exe bundled with JDev 3.1 as the JDK1.2.2 version is actually NOT the java.exe that has been dispatched with the release version of JDK1.2.2! There are however two files in the bin directory of the JDK1.2.2 called oldjava.exe and oldjavaw.exe which correspond to the ones bundled with JDev 3.1?
Could someone please explain what is going on? As it stands at the moment the version of java.exe with JDK1.2.2 does not work for my EJB's but if I replace it with the oldjava.exe, it works fine. Does this mean that JDev 3.1 is NOT actually JDK1.2.2 compliant or have I done something wrong?
This is potentially a major problem for our projects so if anyone at Oracle has any info it would be greatly appreciated.
Cheers
Dave

David,
I changed Sun Java 1.2.2 VM to JDeveloper 3.0 1.1.8 VM and now I get this:
[Root exception is java.lang.ClassNotFoundException: EJBBibles.BibleSearchHomeHelper]javax.naming.Na
mingException: Unknown reasons
at oracle.aurora.jndi.sess_iiop.SessionCtx._activate(SessionCtx.java:82)
at oracle.aurora.jndi.sess_iiop.SessionCtx.activate(SessionCtx.java:276)
at oracle.aurora.jndi.sess_iiop.ServiceCtx.lookup(ServiceCtx.java:320)
at oracle.aurora.jndi.sess_iiop.sess_iiopURLContext.lookup(sess_iiopURLContext.java:215)
at oracle.aurora.jndi.sess_iiop.sess_iiopURLContext.lookup(sess_iiopURLContext.java:201)
at javax.naming.InitialContext.lookup(InitialContext.java:288)
at EJBBiblesServlet.Servlet1.init(Servlet1.java:36)
at org.apache.tomcat.core.ServletWrapper.initServlet(ServletWrapper.java:315)
at org.apache.tomcat.core.ServletWrapper.handleRequest(ServletWrapper.java:445)
at org.apache.tomcat.core.ServletWrapper.handleRequest(ServletWrapper.java:597)
at org.apache.tomcat.servlets.InvokerServlet.service(InvokerServlet.java:257)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.tomcat.core.ServletWrapper.handleRequest(ServletWrapper.java:503)
at org.apache.tomcat.core.ContextManager.service(ContextManager.java:559)
at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHand
ler.java:160)
at org.apache.tomcat.service.TcpConnectionThread.run(SimpleTcpEndpoint.java:338)
at java.lang.Thread.run(Thread.java:466)
If I use JDev 1.2 VM, I get this:
javax.naming.NotContextException: fumaca:2481:eatg/test/BibleSearchRemote
java.lang.Object oracle.aurora.jndi.sess_iiop.sess_iiopURLContext.lookup(javax.naming.Name)
java.lang.Object oracle.aurora.jndi.sess_iiop.sess_iiopURLContext.lookup(java.lang.String)
java.lang.Object javax.naming.InitialContext.lookup(java.lang.String)
void EJBBiblesServlet.Servlet1.init(javax.servlet.ServletConfig)
void org.apache.tomcat.core.ServletWrapper.initServlet()
void org.apache.tomcat.core.ServletWrapper.handleRequest(org.apache.tomcat.core.Request, org
.apache.tomcat.core.Response)
void org.apache.tomcat.core.ServletWrapper.handleRequest(org.apache.tomcat.core.HttpServletR
equestFacade, org.apache.tomcat.core.HttpServletResponseFacade)
void org.apache.tomcat.servlets.InvokerServlet.service(javax.servlet.http.HttpServletRequest
, javax.servlet.http.HttpServletResponse)
void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.Serv
letResponse)
void org.apache.tomcat.core.ServletWrapper.handleRequest(org.apache.tomcat.core.Request, org
.apache.tomcat.core.Response)
void org.apache.tomcat.core.ContextManager.service(org.apache.tomcat.core.Request, org.apach
e.tomcat.core.Response)
void org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(org.apache.tomca
t.service.TcpConnection, java.lang.Object[])
void org.apache.tomcat.service.TcpConnectionThread.run()
void java.lang.Thread.run()
Which means that there is a difference relative to the VM version.
All the names are correct on 8i deployment. And all necessary files are on classpath, (including the EJB source and generated jars, that are also in the /lib on the context dochome).
Any thoughts?
Thanks,
Eduardo
null

Does iPad support many medical texts? Are they easy to read on iPad?

Does iPad support many basic medical texts? Do you get eye strain reading them?

It's a much better idea to purchase the
- Apple TV 3. Via AirPlay, even 1080p protected movies can be played back at their original quality - as opposed to the very low quality of the composite / component connections. (Closed captions, if any, aren't shown on the Apple TV over AirPlay, though.)
- as the ATV3 already uses HDMI (so you MUST have a monitor with HDMI input), you can also purchase the HDMI adapter (referred to as "Apple AV Adapter" by Apple) as it allows for HD playback of protected media (see the section "HDCP requirements" at http://support.apple.com/kb/HT4108 ). It'll, however, will be a wired connection as opposed to AirPlay - but, at least, CC's will also be shown - and a lot more.

Management port in Cisco Switches (are they really physical port)

Hi all,
I have been taught to console into my cisco switch for configurations through console cable + putty (serial terminal).
Then I have been taught to configure a management ip and gateway on the cisco switch.
Switch# conf t
Switch(config)# interface vlan 1
Switch(config-if)# ip address 192.168.1.11 255.255.255.0
Switch(config-if)# no shut
Switch(config-if)# exit
Switch(config)# ip default-gateway 192.168.1.1
All the while, i thought this is the way to remote in to the switch via putty/telnet through the network to configure the switch, until i saw the picture below (cisco catalyst 2960)
=======================================
There is a physical port call ethernet management port. What is it ? What is the difference between this port and the earlier example of setting a management ip in VLAN 1 ?
If i set an IP on this particular interface and I ssh in, will i see the same screen/display/console from the earlier example in which i set a management ip in VLAN1 and I ssh in ?
Regards,
Noob

Hi Leo,
Sorry if you find it hard to explain to me.
I have understood to think of the ethernet management port as a separate entity from the original switch.
Maybe with the help of the diagram below, can you let me know if i have understood correctly ?
*please assume connected port is a management port separated from the normal switch ports
q1) does the ethernet management port need to be connected to another switch ?
I have thought of it as a device on the network and it is mentioned by you previously that it will be connected to a switch
"he traffic goes up the cable connected to the Management port and up a switch. Now that switch holds all the information because it is a switch. "
q2) In the current setup then, terminal B will be able to access the management port - am i right ?
q3) you mentioned that the management port is not able to set any gateway, (which is the router fe0/5 - 192.168.0.3 in my illustration), in that case do you mean that terminal A will not be able to access the management port remotely and it can only be accessible locally ?
Please do correct me if my understanding is wrong.
Thank you so much for your advices.
Regards,
Noob

Bridge Groups, are they required?

Hi All
I'm currently a tad confused about Bridge Groups and ASA/FWSM in transparent more. Are they really required or not?
Here one sample: http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/interface_complete_transparent.html
It's written:
At least one bridge group is required per context or in single mode.
So that really sounds like yes you need one.
Where as this config sample here: http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008089f467.shtml or many others I found online, never have a bridge group configured.
Could somebody please enlighten me about what is correct?
And does it matter if it's an active/standby configuration?
Thanks a lot
pato

Pato,
It depends. On the newer ASA and FWSM you need the BVI. It is just to configure the management IP. This is required.
The old link (the second one that you listed) has the management IP (not under the int BVI) but on the newer ASA code you can see it is configured under the int BVI as you can see here:
http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/interface_complete_transparent.html#wp1382356
-Kureli

Please help! I defragged my hard drive and now Illustrator CS6 is trying to open all of my complex Illustrator files with a "Text Import Options" box as if they are text files, and they are not opening!

Please help! Illustrator CS6 started trying to open all of my complex.ai files with a "Text Import Options" box as if they were text files, and they are not opening! Help!

Hi Monika,
I have spent the last two or three days trying to do what you suggested. I uninstalled Adobe 6 from Windows. Some files that CS6 placed on my system during installation remained, including fonts and .dll files.
I had to abandon the Cleaner Tool you suggested because in one screen it allowed me to specify removing CS6 only, but on the following screen it only gave on option to remove ALL Adobe programs. I could not do that because I didn't have the serial number handy for CS3 in case I want to reinstall it at some point.
I tried to get technical help with the Cleaner Tool problem but no definitive help was available, so I reinstalled CS6 again without having the benefit of the Cleaner Tool. I tried to get the serial number for CS3 so I could use the Cleaner Tool but spent 2 wasted hours in chat. Even though I had a customer number, order number, order date, place of purchase, the email address used AND 16 digits of the serial number, in two hours the agent couldn't give me the serial number. After two hours I had nothing but instructions to wait another 20 minutes for a case number.
Illustrator CS6 is still trying to open some backups as Text and otherNone of the problems have been fixed. I have tried to open/use the .ai files in CS6 installed on another system and am getting the same result, so I don't think the software was damaged by the cleaner. The hard drive cleaner is well-known and I've run it many times without any problem to previous versions of Illustrator or any other programs.
When I ordered, the sale rep promised good technical support and gave me an 800 number, but after I paid the $2000, I learned that the 800 number she gave me doesn't support CS6 and hangs up on me. Adobe doesn't call it a current product even though they just sold it to me about 3 weeks ago.
Would appreciate any help you experts can offer. If I can't solve this, the last backup I can use was from June and I will have lost HUNDREDS of hours of work and assets that I cannot replace.
Exhausted and still desperately in need of help...

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't use. This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages. I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time. Lots of charges.....But I'm am getting no help. Not even an offer of a payment plan to help me out. I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!! Does anybody have any suggestions on how to deal with them? We are not wealthy....or I would just pay this and walk away......

There is a big misconception in what customers believe a cell carrier is obligated to do.
You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
Good Luck

Shortcuts within applications. How limited are they?

I'm looking for shortcuts within applications e.g. to navigate through toolbars. Do they exist?
I'm used to using the keyboard without a mouse. How can I get to insert bullet points into a Word document, for example, without having to mouse through menus. The same with Excel, how can I insert or delete rows, for example without stopping what I'm doing and picking up the mouse.
I know there are some shortcuts, but these seem to be really limited compared to the functions I'm used to being able able to access without changing tools for keyboard to mouse. I don't even have a mouse, just a trackpad. I haven't used a mouse for years, and I've learnt to shortcut nearly everywhere in Windows, just using the trackpad occasionally. Shortcuts are really much quicker and do not interrupt your workflow like using a mouse.
Another example would be using the alt key to jump to the file menus, or highlight the shortcut keys available on any given window or information dialogue.
Are Apple really behind in implementing this kind of convenience, or is there something I'm missing?
Thanks in advance

The only way I know to do what you describe, that can work in all applications, is to get a third-party macro-creating utility. I know of two that work on Mac computers. One (whose name I don't recall right now) is free of charge but hard to use, and not very powerful; it cannot override a shortcut put in the application by the software company, for example making the F1 key do something other than open a "Help" screen. The other is called QuicKeys. You can download it at no charge and use it for 30 days while you decide whether to buy it. After that, it becomes essentially useless unless you buy an activation key (for about $60 U.S.). I could barely work without it, because I—like you—use keyboard shortcuts to do all sorts of things (hundreds of times in a typical day).
I'm assuming that you have already tried System Preferences--> Keyboard & Mouse --> Keyboard Shortcuts tab, which can do some of the things you describe. It is part of the Mac operating system. It is a bit tricky to figure out, but can be helpful if you don't want to buy (and learn how to use) a third-party utility for this purpose.

Some contacts have disappeared from my phone contacts. They are still in the phone because if someone calls me their name appears and if i search in text for contacts they are still there - but if i search in phone contacts they are not there, Help

Some contacts have disappeared from my phone. Not all just random ones. They are still in the phone because if someone (who has disappeared from my phone contacts calls me their name appears and if i search in text messages for contacts they are still there - but if i search in phone contacts they are not there, Help!

But once again, I do not want to lose my other texts, app progress, and photos. I could sync the photos but i would still lose the app progress and texts. I would only restore if it was the only option left, but the other space, as already stated, isnt the main concern. The main concern is those 'deleted' texts. If they go, then a good size chunk of the other space goes. I know you CAN delete texts for good. It worked fine before. All i want to know is why its not working for me now, and how to fix it.
I also know that when you delete texts on your iphone, they get marked for deletion, however they stay on your device (thats why they show up when you search for them.) then when you sync your device with itunes, the texts marked for deletion should disappear. When i synced they didnt disappear. Thats what i need an explanation/solution for. Why the texts marked for deletion didnt get fully deleted after the sync.

Hi all, Since I updated to Mavericks I am having trouble with Safari showing all the buttons/clickable options, but they are gray and will not work. Specifically, the Trash Can/Delete and the "Move to" folder button simply do not work. Any ideas?

Hi all, Since I updated to Mavericks I am having trouble with Safari showing all the buttons/clickable options, but they are gray and will not work. Specifically, the Trash Can/Delete and the "Move to" folder button simply do not work. Any ideas?

Please post a screenshot that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

I deleted a contact, but they still show up in my text options to send. I would like to delete the contact from my texts too.

I deleted a contact, but they still show up in my text options to send. I would like to delete the contact from my texts too.

No don't restore your iphone. I've done that several times & it has never worked. -I still have deleted contacts in my iphone texts. *However if you do restore it you will not lose all your data, pics, text messages etc if you backup in iCloud. It restores back to original phone. Very nice :). Anyhowwww....
I JUST figured it out!! :))). Remove the contact from recents.
Start a text. You should see the deleted contact. All the way to the right of the name is a symbol. The symbol is a circle with "i" in the middle. Click that symbol then in red lettering click "remove from recents".

Wrap text options, are they really limited?

Similar Messages

Maybe you are looking for