Wrapper.createfile failed with error 3: The system can't find this path

Hi,
I have a problem of installing Java on my computer. I saw the error which is "wrapper.createfile failed with error 3: The system can't find this path specified."
I searched a lot of sites to solve it, but i havent found. How do I solve it ?
Thanks...

Hi,
Error code 0x80070003 = "The system cannot find the path specified."
Have you checked the log file smsAdminUI.log? Maybe it can give us some clues.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Flash CS 6 error: CreateWinProcess failed with error 2 - The system cannot find the file specified

Hi,
I'm getting the error "CreateWinProcess failed with error 2 - The system cannot find the file specified" whenever I try to test an Air app within the Flash IDE.
This error even comes up with a new and empty project .fla file. I already updated the Air runtime and Flash to the latest version.
How to fix this problem? Any ideas welcome!
Thank you.

I installed the update, but I'm sorry to say that it did not solve the problem
The error is still there as described by Master §ix and Daniel777
CreateWinProcess failed with error 2. The system cannot find the file specified.
It happens when trying to test, debug, or publish air applications (AIR 2.5 – AIR 3.4 , desktop, android, iOS)
In this case, I can't use the simulator to test the applications,
thanks

_Media creation failed with error message: 'The system cannot find the path specified.'

SCCM 2012 R2 CU2 all latest patches.
I attempted to create a task sequence media and I get the error in the screenshot below. I have deleted and recreated the operating system,boot image, driver pack and task sequence. The usb media is 16GB and the task sequence size is 3004MB.
I only see the error in CreateTSMedia.log as below. How do you fix this?
<![LOG[Beginning media generation]LOG]!><time="12:37:44.522+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:418">
<![LOG[Partition activated]LOG]!><time="12:37:47.720+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="diskvolume.cpp:849">
<![LOG[Finished formatting volume F:\]LOG]!><time="12:37:55.723+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="imagewriter.cpp:772">
<![LOG[Assigning staging directory to F:\]LOG]!><time="12:37:55.724+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="imagewriter.cpp:1122">
<![LOG[===========================================]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:476">
<![LOG[ Beginning pass to compute volume layout]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:479">
<![LOG[===========================================]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:487">
<![LOG[Setting up new volume]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:1297">
<![LOG[WriteVolumeId()]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:1038">
<![LOG[Failed to create media (0x80070003)]LOG]!><time="12:38:04.925+240" date="06-17-2014" component="CreateTsMedia" context="" type="3" thread="4668" file="createtsmedia.cpp:345">
<![LOG[CreateTsMedia failed with error 0x80070003, details='']LOG]!><time="12:38:04.925+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="createtsmedia.cpp:355">
<![LOG[MediaGenerator::~MediaGenerator()]LOG]!><time="12:38:04.925+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:396">
<![LOG[Media creation process that was started from Admin Console completed.
]LOG]!><time="12:38:05.182+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4772" file="createmedia.cpp:1065">
<![LOG[CreateMedia.exe finished with error code 80070003]LOG]!><time="12:38:05.182+240" date="06-17-2014" component="CreateTsMedia" context="" type="2" thread="4772" file="createmedia.cpp:1123">

Hi,
Error code 0x80070003 = "The system cannot find the path specified."
Have you checked the log file smsAdminUI.log? Maybe it can give us some clues.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

System call failed. Error 2 (The system cannot find the file specified. ) in execution of system call 'CreateProcessAsUser' with parameter ( , NULL, Program Files/sapinst_instdir/BS2011/ERP606/AS-ABAP/SYB/HA/DB, &StartupInfo, &ProcessInfo),

Dear All,
I am getting a below error while doing ehp6 installation on sybase (high availbility )
can any one help me on this..?
An error occurred while processing option SAP Business Suite 7i 2011 > Enhancement Package 6 for SAP ERP 6.0 > SAP Application Server ABAP > SAP ASE > High-Availability System > Database Instance( Last error reported by the step: System call failed. Error 2 (The system cannot find the file specified. ) in execution of system call 'CreateProcessAsUser' with parameter ( , NULL, Program Files/sapinst_instdir/BS2011/ERP606/AS-ABAP/SYB/HA/DB, &StartupInfo, &ProcessInfo), line (646) in file (d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp), stack trace: d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\ejscontroller.cpp: 181: EJSControllerImpl::executeScript() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\jsextension.hpp: 1059: CallFunctionBase::call() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\osmod\iaxxbprocess.cpp: 423: CIaOsProcess::start_impl() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp: 238: CSyChildApplicationImpl::start(false) d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp: 262: CSyChildApplicationImpl::doStart() .). You can no
Regards,
Letz..

Hello Mauricio.
Thanks
Two Thinks:
1.- This error appears precisely in the process of creating SAP users including you mention sidadm:
      A.- Execute sapinst
      B.- Installation option is chosen
            SAP NetWeaver CE Production Edition
                    Installation Options
                        High-Availability System
                              Central Service Instance (SCS)
       c.- System ID, Next and appear message error
2.- However, the user manually create sidadm, I gave the permissions you indicate, and the error message is the same
Thanks

Loadlibrary failed with error 126 the specified module could not be found

Hello i get this error message at random when am using oracle sql developer, sometimes it comes right after startup, and some times after 5 mins.
the error closes down the program
please help

Searching the web for "loadlibrary failed with error 126 java" seems to point to issues with OpenGL and certain video drivers and/or environments with multiple monitors. Here are several discussions...
https://netbeans.org/bugzilla/show_bug.cgi?id=243153
Error "LoadLibrary failed with error 126: The module could not - Microsoft Community
[SOLVED] Issue with Technic Launcher: Load Library failed with Error 126 - Technic Launcher - Technic Forums
So it seems this issue is not specific to SQL Developer. The last discussion includes a video link in its last post saying that ".dll" is searched for rather than "atioglxx.dll" on 32-bit systems or "atio6axx.dll" on 64-bit system (in the C:\Windows\system32 folder), so a workaround is to copy one of those to ".dll".

Backups failing with error 19: the backup disk could not be resolved, or there was a problem mounting it

Hello all,
Doubt this issue relates to a recent and ugly issue but sharing anyways (resolved thanks to a user here: LaPastenague)
Time Capsule won't backup if Modem (Motorola SB6121) attached
This was on Feb 10th resolved. Few days later I upgraded to Yosemite. Backups were working fine since.
Yesterday I happen to notice my last backup was 5 days ago. I looked in the console logs and saw:
2/25/15 3:55:06.127 PM com.apple.backupd[2777]: Attempting to mount network destination URL: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
2/25/15 3:55:17.778 PM com.apple.backupd[2777]: NAConnectToServerSync failed with error: 2 (No such file or directory) for url: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
2/25/15 3:55:17.792 PM com.apple.backupd[2777]: Backup failed with error 19: The backup disk could not be resolved, or there was a problem mounting it.
2/25/15 3:57:18.808 PM com.apple.prefs.backup.remoteservice[2021]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
I called Apple. Their front line was clueless. He suggested resetting the TC (latest "tower" model btw") which then a backup kicked off YEAH
But the next hour it failed
Called Apple again, this time to Sr Advisor. He suggested factory reset of the TC and set up again. Also first backup worked then rest failed
Third call to Apple useless also. He was asking questions I didn't feel relevant. He also was asking me to reset the TC which I told him was done 2 hours prior. He asked me to reboot which I could NOT at that time.
I begged him to collect data to submit to engineering, which will take days to get a reply.
So I thought I would throw this out to the community....
TC Is NEW (replaced from last issue). Mac is 8 months old (iMac 27"), Os is Yosemite, TC also new (latest model)
Thanks...

Yosemite is problematic on two fronts.. Networking and Time Machine.. so the combo of doing both with a Time Capsule is like bugs on bugs.
Here is my standard list.. but your problem maybe difficult to resolve.. and my suggestion is simple.. until Apple get their act together and fix TM.. buy Carbon Copy Cloner and use that for your backup. It is solid and reliable.. even better if you use USB drive plugged into the computer and do a bootable clone.. because then you have a backup that is able to be tested for full functionality 2min after the end of the backup.
This also starts from a factory reset.. but the reason for it is to change the configuration which is much more easily handled with factory reset to begin.. the instructions are there.. because this is my standard reply.. this is not uncommon!!
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the Mac itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. What I list here is good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

FF not connecting to web- This "Network Connections" message pops up: Error 623: The system could not find the phone book entry for this connection. Any ideas?

About a month ago I could no longer connect to the internet on our PC. Every time I clicked on the Firefox icon the Netscape sign-on window would pop up. I would try to close it but it would pop up over and over again. If I tried to close it a dozen or so times eventually Firefox would open up but it would never connect. Just today I moved my Netscape file to the recycle bin. No longer does the Netscape sign-on window pop up but following Network Connection error message pops up: "Error 623: The system could not find the phone book entry for this connection".. This error window behaves the same way the Netscape sign-on window used to behave. Every time I click to close it it pops open again. After numerous clicks Firefox opens up but it never connects.

Do you have this error message on a Mac computer or on a Windows computer?
I've only seen this error mentioned on a Windows computer.
*http://kb.mozillazine.org/Autoconnect

The system can't find support team when support message create

Dear experts,
The system can't find support team when support message create.
It show the error that
"The action definition SLFN0001_ADVANCED_SMDIAG has not been assigned a merging technology "
and "the action merging cannot be executed."
Did anyone know how to solve this problem?
Thanks in advance

Hey pavienee,
Let me inform you that the action defination SLFN0001_ADVANCED_FIND_PARTNER is responsible for finding the right support team, this is valid if you make relevant settings by assigning partners in ib52 ti the ibase component.
The action log SLFN0001_ADVANCED_SMDIAG has nothing to do with support team determination.... This action is meant for Solman diagnositics.
Please Reward points for usefull answer and revert for any clartifications.
Regards,
Anand..

My Firefox crashes frequently, but I the system can not find the reports to send for analysis.

My Firefox crashes frequently, The system goes to the grayed screen and sits there until I try to close it, then it says "Firefox not responding" and I close the program. When I go to "about:crashes" it says the report was submitted, but I never get any feedback and when I try to retrieve the report to look at it, the system can never find it. This happens at least twice daily. It keeps searching for a while, then displays the gratituous "Oh Noes. The report could not be located" message. I've included the latest crash report address.

Firefox 4 requires at least OS X 10.5. You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

I can't syncronize my ipod classic 80gb anymore. "the system can't find the disk", but it's always connected without touching it! Can anyone help me?!

"the system can't find the disk", but it's always connected without touching it! Can anyone help me?!
I tried to reset the ipod but I cannot syncronize the new music I added.
Could it be a problem of the songs or the ipod?

Assumng you have a PC, start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Creating Protection Group Fails with Error:360 The operation failed due to a virtual disk service error

Hello
I'm setting up a DPM server (2012 R2) at a remote site; everything goes well with no issues until a protection group is created, at which point I get the following error;
Create protection group: Protection Group 1 failed:
Error 360: The operation failed due to a virtual disk service error
Error details: The system cannot find the file specified
Recommended action: Retry the operation.
The environment is as follows;
- Virtual Machine Running Server 2008 R2 Fully updated
- Storage Pool is an iSCSI connection Thick Provisioned 1TB GPT and shows in Disk Management with no issues.
- Have connected to Session 0 (console)
- Error log shows The provider did not receive a Plug and Play service notification for the volume. volume=10 for the VDS Dynamic Provider
Can Anyone Help?
Thanks
.Adam Langdon

Hi,
Disk defrag is initiated when a volume shrink is attempted. See if there is any problem defragging a volume and correct any problems doing that.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

I have a cannon mg2100. When I scan the error message says it can't find a path to the file

My cannon mg1200 prints and scans but suddenly the scanned photo/doc can't find a path to any file. I just started having this problem yesterday.

Hi, trikerider47!
So that the Community can help you better, we will need to know exactly which operating system is running on your computer (Windows or Mac, and which version thereof). That, and any other details you'd like to give will help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

I need to download Adobe Macromedia Flash and Adobe won't let me download it until i get a 32 bit version of Firefox. Where on the website can I find this version?

I'm using Windows 7 and Firefox 3.6.6 as a browser. I need to dowload some Adobe software like Flash and i can't do it because this version of firefox is a 64 bit app. I need a 32 bit FF app/where on the website can i dowload this?
Thanks
Tim

You already have Shockwave Flash 10.2 r152 installed for Firefox on the PC you used to post here, see your ''More system details...'' next to your posting.
There are no 64-bit builds of Firefox made, only 32-bit currently. There are some 3rd party builds floating around out there, but Mozilla doesn't allow them to be named Firefox - they would be called Namoroka for 3.6 versions. Mozilla does have a Minefield 64-bit build for 4.0-pre versions, but it won't be available as Firefox until probably Firefox 5 is released.
If your situation is with a different PC than what you used to post here: 
1.Download the Flash setup file from here: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). 
See this: 
[http://vistasupport.mvps.org/run_as_administrator.htm]

Windows script host - Error :the system can't find the flie specified -code:80070002

hello i need help ...
i have windows 8.1
i tried to download this
which i found on youtube ....
https://www.youtube.com/watch?v=zQyHhyF09kg
http://yourgamesdownloads.com/download/?id=1030&name=Nintendo%203DS%20Emulator%20v2.9.4&name2=Install%20and%20open%20it,%20then%20follow%20video%20tutorial&image=i.imgur.com/BKhrC93.png
then my computer said it found a virus [ mcafee] on it and put i think one of the files away >.< .....
after that i have been getting this Error on start up
http://i58.tinypic.com/ofofh2.png
please help me remove this error

Hi,
It seems this is caused by the program file missing, reinstall the Adobe application would fix this issue.
Alex Zhao
TechNet Community Support

When i want download Firefox it won't find it. the system can not find a stock.

I did a few clean ups but now Firefox can not be installed on my laptop anymore. When i download it it wont find it anymore on my system.
Can you explain what it is.
With respect
Marien

Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test to see if that helps.
Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Wrapper.createfile failed with error 3: The system can't find this path

Similar Messages

Maybe you are looking for