Wrapping Crosstab using SAP Hierarchy in Crystal Reports

Hi Experts,
hope you are fine!
Need some advice and helpful hints achieving my goal.
Frontend Tool: Crystal Reports for Enterprise SP2 or even Crystal Reports 2008.
DataSource is BEx Query with Profit Center Hier. in columns and a cost type structure in Rows.
Using a Cross Tab and selecting the PC in columns, results in that Crystal is displaying the hierarchy as it is, which is actually good.
But not readable if you have more than 150 child nodes and more than 15 Levels.
I am looking for a optimized way to display such a scenario.
Whtin this lesson the mentor is explaining how to wrap columns within crosstabs.
Link: [http://www.crystalkeen.com/articles/crystalreports/crosstabwrapping.htm]
The formula @EachRegion is counting the rows and the formula @GroupRegions is than defining the number of regions to be displayed in the columns.
I was looking to replace the formula @EachRegion with the HierarchyLevel(GroupingLevel) function which is delivering the same result, but due to any reason I can not group on this formula.
My intention was grouping on the level number and  keep all nodes on the samel level together so the wrapping should happen level wise. The report finally should look like this using a cross tab:
Group 1                               level 0
            cost a                       50
            cost b                       20
Group 2                               level 1
           cost a
           cost b
Or do you have other option to have a better view on this, maybe using subreports or anything what Crystal is offering?
Apologize if this sounds a bit confusing, but your hints are much appreciated.
Thanks and bye

Hi Debi,
thanks for your reply.
The formula for grouping purposes is: HierarchyLevel(GroupingLevel({ZTEMP_Profit-Center\Profit-Center}))
The result is that for each node the level number is displayed.
I tried to put in the detail section or grouping section thinking that it should be used first in the report somewhere but wo success.
appreacite your response.
bye

Similar Messages

  • No SAP Datasources or SAP Toolbar in Crystal Reports 2008

    I cannot see the SAP toolbar or SAP datasources under "Create New Connection" in Crystal Reports 2008 SP1.
    After reading many threads on SDN and reistalling Crystal Reports 2008 SP1 and the BOBJ SAP Integration Kit many times I have not been able to get this to work. I have installed the following in order:
    - SAP GUI for Windows
    Release: 710
    Build: 1046700
    Patch Level: 12
    includes the BW 3.5 AddOn and BI 7 AddOn
    Crystall Reports 2008 SP1 which I installed all components except Legacy XML Export.
    Business Objects XI Integration Kit XI 3.1 for SAP which I installed all desktop components and all server components excluding web content and SDK. This was a local install on my PC.
    I have ensured that I have only one instance of SAPLOGON.ini on my PC.
    I have not applied the transports yet because I want to see the SAP datasources and SAP toolbar in Crystal Reports before I progress.
    We do not have Business Objects Enterprise and I'm not sure what "BOE 3.1 Client Tools" is referred to earlier in this thread. My understanding is that in addition to SAP and BW we just need Crystal Reports 2008 and the SAP integration kit.
    We are on ECC6 and BW 3.5.
    I hope someone can help.

    Hi Stratos,
    Thanks for your response. I finally got this working. My issue was that I originally used the Crystal Reports 2008 and BOBJ Int Kit downloads from the SAP support portal. I checked with another SDN user Steven Dierick - thanks Steven - for the version of Crystal Reports 2008 he was using (version 12.0.0.683).
    I downloaded Crystal Reports 2008 version 12.0.0.683 and the BOBJ Int Kit from the downloads section of sdn and it works!! SAP Toolbar, datasources and everything.
    Considering I'm using Crystal Reports 2008 SP0 are there any disadvantages of not using Crystal Reports 2008 SP1?
    If I'm better off using SP1 where should I download Crystal Reports 2008 SP1 and the appropriate BOBJ SAP Integration Kit?
    cheers,
    John

  • Error While connecting  to SAP R3 from crystal reports

    Hi Experts,
    I am trying to connect to a SAP R3 from crystal reports, it gives below mentioned error.
    Logon failed.
    Details: CMALLC: rc= 27 > Connect from SAP gateway to RFC server failed
    Connect_PM GWHOST=10.11.12.13, GWSERV=SAPGW12, SYSNR= 12
    Location SAP-gateway on host xyz/sapgw12
    Error timeout during allocate
    TIME Wed Nov 18..
    Release 700
    Component SAP Gateway
    Version 2
    RC 242
    Module gwr3cpic.c
    LINE 1872
    Detail no connect of TP sapdb12 from host 10.11.12.13 after 20 sec
    COUNTER 6
    Please help me to solve this error.
    Regards,
    Ganesh

    Hi
    please ask your network admins if there is a firewall between your CR Designer installation and your SAP R/3 system.
    I assume that you have imported the necessary trsansports in your SAP R/3 system.
    Which kind of driver do you use for the connection to SAP R/3?
    Regards,
    Stratos

  • How to use oracle functions in Crystal Reports XI using Oracle Server

    Hi all,
    Is it possible  to use oracle functions in Crystal Reports XI using Oracle Server as Data Source.
    If i try to use a procedure,i am getting error with message "Invalid Arguement Provided".
    Functions are not visible objects like tables,views and stored procedures.
    The  jdbs driver i m using is oracle.jdbc.driver.OracleDriver.

    I think it is not possible to add functions in crystal directly for any database. You need to use those functions in a stored procedure and add that storedprocedure as a datasource.
    [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233353335333833323333%7D.do]
    regards,
    Raghavendra

  • Using DB2 views in crystal reports with java

    Post Author: Shikha Tomar
    CA Forum: JAVA
    Hello,
    We have used DB2 views in Crystal Report 11.
    We are able to view the report through crystal report tool but while using this rpt file in java application,the DB2 view is not found.
    It gives an error: "table SCDC.View_report not found."
    SCDC.View_report=Name of the view used in rpt
    Code for calling rpt is as below:
    The line marked as red gives the error:
    private static void switch_tables(DatabaseController databaseController) throws ReportSDKException, IOException {
    final String URI = "!com.ibm.db2.jcc.DB2Driver!jdbc:db2://"SERVERNAME":"PORT"/"DATABASE_NAME"!"+"";
    final String DATABASE_DLL = "crdb_jdbc.dll";
    //Obtain collection of tables from this database controller.
    Tables tables = databaseController.getDatabase().getTables();
    CommandTable commandTable=new CommandTable();
    //Set the datasource for all main report tables.
    for (int i = 0; i < tables.size(); i++) {
    ITable table = tables.getTable(i);
    //Keep existing name and alias.
    table.setName(table.getName());
    table.setAlias(table.getAlias());
    //Change properties that are different from the original datasource.
    table.setQualifiedName(TABLE_NAME_QUALIFIER + table.getName());
    //Change connection information properties.
    IConnectionInfo connectionInfo = table.getConnectionInfo();
    //Set new table connection property attributes.
    PropertyBag propertyBag = new PropertyBag();
    //Overwrite any existing properties with updated values.
    propertyBag.put("Trusted_Connection", "false");
    propertyBag.put("Server Name", SERVERNAME); //Optional property.
    propertyBag.put("Connection String", CONNECTION_STRING);
    propertyBag.put("Database Name", DATABASE_NAME);
    propertyBag.put("Server Type", "JDBC (JNDI)");
    propertyBag.put("URI", URI);
    propertyBag.put("Use JDBC", "true");
    propertyBag.put("Database DLL", DATABASE_DLL);
    connectionInfo.setAttributes(propertyBag);
    //Set database username and pasword.
    //NOTE: Even if these the username and password properties don't change when switching databases, the
    //database password is not saved in the report and must be set at runtime if the database is secured.
    connectionInfo.setUserName(DBUSERNAME);
    connectionInfo.setPassword(DBPASSWORD);
    connectionInfo.setKind(ConnectionInfoKind.SQL);
    //connectionInfo
    table.setConnectionInfo(connectionInfo);
    //Update old table in the report with the new table.
    databaseController.setTableLocation(table, tables.getTable(i));
    Regards,
    Shikha

    Hi,
    Fo business views please reffer to [Business Views Administrator's Guide|http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_bv_admin_en.pdf]
    Yes, Crystal Reports 2008 can consume business views.
    Regards,
    Ramu.

  • Using HTML script in Crystal Reports??

    Can anyone let me know how to use HTML scripts in Crystal Reports?
    I just need to develop report using HTML so that the output of the report will be in RIch text fomat

    Hi,
    You can't design a report using HTML script.  I'm not exactly clear on what you want to do but if you have an HTML app, you have to design the report in Crystal and from your application, call the viewer.  This will allow you to have the report appear in your program. 
    If you are talking about formatting the report, you can set each object as a class in your CSS and call it from your program. 
    I guess a little more information on what you are trying to accomplish may help answer your question more directly.
    Thanks,
    Brian

  • SAP BW and Crystal Reports XI R2 Parameter list problem??

    Hello Experts,
    I facing a problem.
    I have a crystal report based on a BW Query. It has one parameter called Country.
    Eg:
    Until now, in BW query country variable has the following values.
    USA
    JAPAN
    GERMANY
    Now, from this fiscal year we have the following values for country variable
    USA
    JAPAN
    INDIA
    GERMANY
    UK
    I am trying to edit the list of values for the country variable in crystal reports. It is not getting reflected in SAP BW. I also tried refreshing it several times.
    THE VARIABLE IS A HIERARCHY VARIABLE.
    Can any one Please help.!!
    Regards
    NMU
    Edited by: Mohammad Usama on Oct 20, 2008 4:26 PM

    You said that you are using version XI R2 SP2 (for BO Enterprise)  - do you have any FixPacks on this codeline? (FP2.x)
    Question: If YES to above, have you made use of the equivalent FixPack for Integration Kit?  (known as "Partners Fix Pack 2.x ")
    There are a few fixes in this area, I was thinking like:
    ADAPT00716808 -  When scheduling a report from SAP Business Information Warehouse (BW) that contains parameters from a hierarchy or a hierarchy node variable, the default values fail to be displayed from InfoView. >>
    ADAPT00894127 -  When users enter date parameters in the Calendar dialog box in SAP InfoView, the dates entered fail to appear in the corresponding field.
    Good luck,
    Henry

  • SAP 8.8 Crystal Report Layout problem in client workstation

    Hi Experts,
    We have import crystal report to SAP Business One as Form Layout or AP Invoice. We have already created the token DocKey@ so it would automatically be printed and will not ask for the document number. The layout works fine using the server workstation but in the client workstation we cannot proceed with the printing because when we click on the preview button, a login window appears with this details:
    Database Login
    Server Name : gray out or not active
    Database: gray out or not active
    Login ID: active
    Password: active
    We tried to enter the SQL login but fails.
    Is there any components that we need to install in the workstation before it could function the same way as PLD?
    Thanks,
    Janice

    You can try creating the ODBC connection, which is the same as on the server.
    Assuming this is the scenario:
    1. You write the invoice using crystal report on the server
    2. On the server, Control Panel--> ODBC, you have created an ODBC link eg; SAPB1.
    3. The report is connecting to ODBC link and pointing to database OECUS
    On the client workstation, you need to create:
    1. Control Panel--> ODBC, you need to create an ODBC link as on the server.

  • SAP tab in Crystal Reports 2013 issue

    We are using SAP Crystal Reports 2013 SP3 to build reports on BEX queries (BW 7.2). Creating a report via 'File' --> New connection --> BW MDX driver works fine, I can select bex queries & cubes and see the data. However SAP provided tab 'SAP' does not work as expected. When adding a new bex query using SAP--> Create new report from a query, I can see the list of queries and select one but it does not open and throws the following error -
    "An error occurred while generating a new report templete.
    No error"
    Using the "File" option any change to the .rpt file forces BO admin to update "DB logon" information in CMC (currently i cannot save .rpt file directly on enterprise from Crystal client due to some issue)  and we want to avoid this kind of maintainence using SAP authentication provided by using SAP tab, also the Crysal report prompts when run from BI launch pad request for prompt values twice (once for the report and once to pull list of values for each prompt) which can be avoided using SAP tab. I thought access to dev BW server is fine since the "File" tab works fine. Our BASIS team confirmed BOBJ dev servers have access to BW gateway. Am I missing something here, please help me with your experience and ideas to troubleshoot this as the only solution i could google was from a 2012 SAP recommended article to fix reginfo configuration files on SAP server
    I reinstalled Crystal Reports client twice to make sure intallation was not the issue.
    Thanks
    GORO.

    Hi Abhilash,
    Thanks for your response.
    Yes reports are working in CR 2013 designer.
    Getting Alignment and long spaces between the paragraphs issues even though report has properly designed on designer.
    After exporting to pdf getting above errors...
    -Srinivas

  • SAP NetWeaver Portal Crystal Reports PDF Export Problem

    Hallo all,
    We are working with BO Edge XI 3.1 with integration on SAP Netweaver Portal. The problem is that integrated in SAP Portal CR reports cannot be exported to PDF or printed out.
    I am using an URL iview with the parameter sOutputFormat=P to run the report.
    When I want to print out the report I get the warning message from Internet Explorer "The download of files from this page is for security reasons blocked. Click here..." --> Download the file. By clicking on the u201CDownload this fileu201D the report starts to run again. PDF export doesnu2019t happen.
    Did somebody have the same problem?
    Thanks a lot in advance!

    Hello Ingo,
    thanks a lot for Your help. I have already talked to my IT department and they are looking for the solution of this problem, too.
    Is there a documentation  about necessary settings in the browser to work with SAP NetWeaver Portal and Crystal reports?
    The problem is that on some clients the PDF export is working and on another clients not. The settings of IE seem to be equal.
    Regards,
    Katharina

  • Using stored procedures within Crystal Reports

    Hello all,
    Background Information:
    I am trying to teach myself how to execute a stored procedure within Crystal Reports.  This is an aspect of Crystal that my work group has not utilized before and we're trying to gather information on the subject.  We use Oracle to create and execute functions and procedures all the time, but I've never tried this within Crystal.
    I use the "Add Command" functionality within Crystal on most of my reports so that I can taylor the sql to the report.  I find this easier to do versus using the ODBC connection to the tables and writing the code through the Crystal Reports wizard.  I also frequently use functions within these sql statements that are inserted in the Add Command.
    What I'm trying to achieve:
    I have a report that needs to run as a "trial", and then later as a committed "run".  This is for a monthly billing system.  Essentially, the user will run the report as the "trial", preview the data, make any necessay corrections, and then later, run the actual billing run.  Within my application, the bills are not actually marked as "billed" until they are actually "billed', if that makes sense.  As a result, the "trial" report will need to mark the bills as "billed", generate the report, and then rollback the data (so that the bills are not "billed".  Once the actual billing reports are ran, the same report will run, but with a "commit" at the end of the report so that the bills are now "billed".
    I'm trying simple tests and failing (i.e. taking baby steps to learn what capabilities Crystal has):
    I created as simple of a procedure as I can envision.  This procedure inserts the word "test" in one of my fields for a provided account number.  When I try to run this procedure via Crystal (via New Report ->History->My ODBC Database link->Stored Procedures), Crystal asks for the account number parameter, as it should.  But I then receive the error message:
    Database Connector Error: '42000:[Microsoft][ODBC driver for Oracle]Syntax error or access violation'
    The existing ODBC connection has work great for years and years to retrieve data from tables, but this is the first time I've tried to utilize procedures.  Can anybody help?  And can anybody explain what the Stored Procedures link is supposed to do?  Am I going down the right path?
    thanks,
    Noel

    Hello,
    Make sure the Oracle client install path is in the PATH statement. And also make sure you are using an IN/OUT cursor. CR only reads the last SELECT statement. Search the Documents area on how to create a Stored Procedure.
    Also, if you are using CR XI ( 11.0 ) then upgrade to CR XI R2 and apply all service packs ( SP 6 ). Go to this link: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
    Direct link to the Trial version: http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
    It may fix your issue also.
    Thanks again
    Don

  • Problems using Dynamic parameters with Crystal Reports and SBO 8.8

    Has anyone been able to successfully use a dynamic parameter in Crystal Reports with 8.8 using the Business One connector? When we try we get an additional logon to the database that pops up and the logon fails.
    We need this because we want to return live lists of PO documents from the server for selection. We are also trying to use nested dynamic parameters, because we want to first return the PO document based on the PO number, and then chose specific rows based on a field value in POR1.
    It works if we don't use the Business One connector, but then the report doesn't function properly inside of SAP.
    Any ideas would be appreciated.

    I have tried using tokens but they are too simple. I need something like a subselect where you first select one value and then another that is a subset of those values. Apparently the tokens can't even use a "where" clause.
    SAP dances around Dynamic parameters, but won't come out and say that they can't be used with the B1 connector. If that is the case then they should just say so and stop wasting our time. Apparently Crystal is not truely interfaced with B1, just sort of hanging out with it.
    I don't really care other than I have to do this select, subselect. If someone has a way to do that with tokens I would love to hear it.
    Thanks,
    Roy

  • SAP username in Crystal Report

    Hey,
    i want to display the sap username in a crystal report. I'am using SAP BI 7.0, Crystal Reports 2008 and the Integration Kit. It's possible?
    Greetz
    Tim

    Post your question to the Business Object Integration Kits forum

  • Problem Change SAP Query in Crystal Reports

    Hi,
    i have a problem with changing a SAP Query in an Crystal Reports.
    I build a Report with a Query(1) and Design the Report complet everything works fine.
    I make a new Query(2) and if i make a new Crystal Report with this new Query everything works fine.
    Now my problem is i would like to use the design of the first report. Therefore i open the first report and save it under a new name. Delete all Database fields and delete the database connection.
    Now i gave in the new database connection to the new query(2) and in the Database fields i see a lot of Fields but not the right ones. Its completly wrong. Is there anybody how know this problem?????

    Hi i solved my problem by myself.
    I have to set Query as external available and have to use the MDX Query.
    Its strange because if i build a new report the query dont have to be set as external available.

  • Localization of CrossTab row and column label Crystal Report RPT file

    Dear all,
    Does anyone know how to support multiple locale texts (English and French) in CrossTab Row and Column Header labels and grand total labels? Is there a way to parameterize text objects CrossTab in one single Crystal Report RPT file to use some sort of locale resource file containing text string for different languages based on the users of RPT at runtime? The idea is to use one single RPT file to generate report for different locale text for CrossTab Row and Column abels and grand total labels  instead of creating RPT files per locale?

    Hi,
    Does the database have a column that identifies the language? If it does, then you could create two separate cross-tabs and place them in different sections and conditionally suppress the section depending on the language from the database.
    That's the only thing that can be done in my opinion.
    -Abhilash

Maybe you are looking for

  • How can I transfer my music from an external hard drive to my Time Capsule and can I play it through apple TV?

    All my music is currently stored on an external hard drive, but I would like to transfer everything onto my Time Capsule, so that everything is backed up, what is the best way to do this? Is there a way I can then play all the content stored on the T

  • Why does my Itunes no longer recognize my Iphone 4s?

    Just recently my Iphone (when plugged in to my Windows PC) does not show up on my Itunes. An "IPHONE" tab used to appear in the corner next to the "Itunes store" tab after i connected it, but now not any more. It does still charge my Iphone and when

  • Help with replicating/updating vendor master data

    Hi, Currently, we run the bbp_vendor_sync program to do the replication. It does the job of both bbpgetvd (new vendor creation) and bbpupdvd (update existing vendor). But the problem is, we have two number ranges for vendors. One is Numeric and other

  • DEQUEUE_MSGID column in a queue table

    There are three msgid-related columns in a queue table: MSGID, CORRID, DEQUEUE_MSGID I know the meaning of the columns MSGID and CORRID. But what is the column DEQUEUE_MSGID for?

  • Advice for poker odds calculator

    Hi, Im about to start building an application that will keep track on what hand has best odds to win in texas holdem. For every card I get I push a button, for ex AK spades I push two buttons. One for the A and one for the K, and then the final two b