Wrapping text at Web Analysis Item

Hello,
Does anybody have a clue how we can wrap the text at the columns of web Analysis Item at WEB application Designer 7.x
At the previous version 3.x it was something done with table interface class.
Although SAP clames that all this fancionality is part of BEx Web Interfaces as part of Web Item
Analysis Modifications like Column Width Module, I cant find something about adjust the column width and also enable word wrapping.
Regards,
Theodore

Hi,
Please refer to the following link.
[http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm]
This explains how the columnwidth module can be used for setting the column width
Hope this helps.
Thanks,
Neethu

Similar Messages

Wrapping text with web dynpro ALV

Hi there,
I have got an web dynpro ALV and have set the SET_FIXED_TABLE_LAYOUT value to abap_true. This provides what i need apart from instead of not showing the text that can not be fit into the available column width I would like it to wrap the text, so it is all displayed. Is this possible?
Also is there a way to allow the user to change the width of the columns by clicking on them and dragging them bigger/smaller.
Thanks and Regards
Mart

Hi Mart,
Please refer this [thread|Wrap in ALV], it might help.
Also is there a way to allow the user to change the width of the columns by clicking on them and dragging them bigger/smaller.
Refer the reply of Thomas Jung in this [thread|Adjusting Column width on Web Dynpro ALV].
Regards
Arjun
Edited by: Arjun on Feb 23, 2009 10:48 AM

Have to click twice on a cell in a Web Analysis Item to enter a value

I've created a IP Web Application but it is a huge frustration to populate the table cells. On the web, the user have to click on a cell twice before a value can be entered. Does anyboby know if it is possible to change a setting or to apply any other solution to open a cell as soon as you click on it or tab to it
Will appreciate any recommendation
Pieter

Hi
please check note 1252317
Regards Matthias Nutt
SAP Consulting Switzerland

Execute planning function in Web template for selected row in analysis item

Hello all.
I have been trying several different solution for this issue I have, but could not ,make it work. Hopefully, any of you can give me some ideas.
Initially the scenario seems to be easy.
I have a Web template were I show a query analysis item with costcenter, plan/act type, user and entry date. I allow single record selection in this item.
I have a button that should execute a planning function from the plannig modeler.
The planning function should be executed only for the costcenter and plan/act type which are selected in the analysis item.
How do I have to link the two objects :analysis item and planning function, so that the planning function is executed with the correct filter? What should be the filter definition (if any expecific things to consider)?.
Thanks in advance for your help.
Best regards,
Alfonso.

Dear Deepti.
Thanks a lot for your answer, but it did not solve my issue.
The problem is that my query is not created over the same agregation level as the planning function is, and as per the link you have sent me it seems to be a prerequisite.
Is there any other way to do it?
More in detail, I am implementing a Lock/Unlock mechanissim for planning costcenters. I have a n ODS where I store my costcenetr status(lock or unlock) and I also have a cube where the planning values are stored.
My query(to select the costcenter to unlock) is done from the ODS, and my planning function is done in an aggreagation level of my cube (this is to lock the costcenter in cube, to avoid incorredct updates while it is unlocked/locked).
The issue that I have is that I can not find a way to send the selected information from the query to the planning function.
I hope you have more ideas.
Thanks a lot.

Referring to Dynamic Text Labels in Web Analysis

Hi,
How do we refer to Dynamic Text Labels as variables in SQL query in SQL Spreadsheet object or any other object in Web Analysis?
WA documentation gives the following formats to put in the Insert Text for Labels. But I would like to know if this is the same way or a different way we would refer to them as a variable in SQL query.
<<filter DataSourceName1,0>>
<<cell DataSourceName1,0,0>>
z

can you tell me what inherit permission you gave to make it work.
I have a folder having a view access only. whenever i make new reports as admin...i cant see my new reports untill i refresh the "apply permission to children" options gain.
But thats not what i m looking for...i want it come on its own when I create a report.

Web Application Designer - Analysis Item

Hi Experts,
We are using Analysis Iten property (Column From And Colum To) to display one few key figures from Query. This is because we are using same query for differnt Analysis items with differnt key figures.Now issue is we are having few key figure nodes collapsed in Quey designer. Analysis item is not considering the sub key figures of collapsed note. So whenever we expand a node a run time,the key figures at the end are not getting displayed. Please provide any solution for this issue.
Thanks in Advance,
Reshma M

It is because the column numbering changes when you expand a collapsed keyfigure.
Create a query view with the keyfigure(s) that you need for the analysis web item. Then use this query view for the analysis web item and remove the settings on Column From/To properties.
Regards
Francis

How to link web app item to different URL other than detail page

Hi, this is probably a bit of a stupid question but I can't find the answer anywhere. On my site, I have projects set up as web apps--I want the customer to be able to click on the title or image for the web app and for it to link to a PDF or blog page, NOT the detail view.
So I want the app title and image to link to a different URL, not detail view.
Here's the page in question, if that helps: http://sherrihaab.businesscatalyst.com/projects
Thanks in advance for any help.

{tag_name_nolink} - Will make the title with no link wrapped around it
{tag_yourimagefield_value} - Will give you the raw source of the file location
You can then form your own image html and links wrapping this and the web app item name text.
To form the link source to go to - create a text custom field and just type or copy and paste a url into that field.

How to set dynamic column width for analysis item

Dear Experts,
I have a query view which is added in the web template as an analysis item. The web item properties on width is not working - I tried entering a value in the width but when I execute the template, the query view's width still stays the same.
Module com.sap.ip.bi.rig.ColumnWidth don't seem correct because I don't want the column width to be static. As my number of columns may change, I wanted the overall width of my query view to stay the same.
Appreciate any ideas which can solve this issue
Thanks and Regards,
huimin
BW newbie

Hi Huimin,
I don't think it is possible to fix the width of the Analysis webitem since it dynamically adjusts its width based on the text maxlength within its cells. Unless you use com.sap.ip.bi.rig.ColumnWidth where the cols are static, you cannot achieve this.
Even if you do override the css settings using a cell padding or something, the portal settings would override the same. How about using a Report webitem to insert tables/charts & check if the width can be adjusted here - just a thought.
--Priya

Need Calendar Year as a Variable in the Caption of an Analysis Item WAD 7

I am using Web Application Designer 7.X for the first time.
I am modifying a template that has the following Analysis Item in it:
           <bi:ANALYSIS_ITEM name="TABLE_4" designheight="300" designwidth="966" >
                <bi:WIDTH value="966" />
                <bi:WITH_TRAY value="X" type="CHOICE" text="" >
                    <bi:TRAY_SETTINGS type="COMPOSITE" >
                        <bi:CAPTION value="Employee Information" >
                            <bi:text localkey="1" />
                        </bi:CAPTION>
                        <bi:CAPTION_VISIBLE value="X" />
                    </bi:TRAY_SETTINGS>
                </bi:WITH_TRAY>
                <bi:DATA_PROVIDER_REF value="DATAPROVIDER_5" />
                <bi:LINKED_DATA_PROVIDER_REF_LIST type="ORDEREDLIST" />
                <bi:ROW_HEADER_VISIBLE value="X" />
            </bi:ANALYSIS_ITEM>
The Caption of the table is currently set to "Employee Information". I need the Caption of the table to say "2007 Employee Information" where the year is the previous year. In other words, if the web application is executed in 2008, the title would say "2007 Employee Information". If the web application is executed in 2009, the tilte would say "2008 Employee Information".
I am very new to BW and WAD so a detailed explanation would be greatly appreciated.
Points will be awarded.

I am trying to change the caption of the Analysis Item using Javascript, but the caption is showing up blank. This is my first attempt at writing Javascript so a detailed answer would be greatly appreciated.
I would like the caption to read "HR Data 2007" if the function is called in 2008. I would like the caption to read "HR Data 2008" if the function is called in 2009. So always use the previous year in the caption.
I took the following steps:
1. In Web Application Designer, I created a Script item in my Web template.
2. I created the function executeJS_SET_ITEM_PARAMTERS_R using the Script Editing Wizard.
3. I made modifications to the function to add the year into the caption.
4. I modified the XHTML by adding the function to the body onload. I am not sure if I need to do this part or if my syntax is correct here. I can't post how I formatted the body onload because this causes 500 errors when I try to post the message.
Here is the part of the function that I modified using the Script Editing Wizard.
                // Create parameter CAPTION
                var d = new Date();
                d.getFullYear();
                var newCaption = "HR Data " + d;
     var paramCAPTION = new sapbi_Parameter( "CAPTION", newCaption );
     paramListTRAY_SETTINGS.addParameter( paramCAPTION );
     // End parameter CAPTION!
Here is the XHTML for the Analysis Item showing that the caption is set to be visible.:
           <bi:ANALYSIS_ITEM name="TABLE_4" designheight="300" designwidth="966" >
                <bi:WIDTH value="966" />
                <bi:WITH_TRAY value="X" type="CHOICE" text="" >
                    <bi:TRAY_SETTINGS type="COMPOSITE" >
                        <bi:CAPTION />
                        <bi:CAPTION_VISIBLE value="X" />
                    </bi:TRAY_SETTINGS>
                </bi:WITH_TRAY>
                <bi:DATA_PROVIDER_REF value="DATAPROVIDER_5" />
            </bi:ANALYSIS_ITEM>
Here is the XHTML for the Script Item:
            <bi:SCRIPT_ITEM name="SCRIPT_ITEM_1" designwidth="300" designheight="70" >
                <bi:SCRIPT_CONTENT_TYPE_LIST value="JAVASCRIPT" />
                <bi:SCRIPT value="biLargeData:9CG1G0CWFS76DYKR0YY9GYHEM" />
            </bi:SCRIPT_ITEM>
Edited by: Karen Thompson on Apr 10, 2008 5:34 PM
Edited by: Karen Thompson on Apr 11, 2008 6:21 PM

Performance of a report in Web Analysis??

Hi Guys,
•How do u improve the performance of report ?
•In a general store 10 products are there, In that only 8 products are sold. I need a report for the products which are not sold(for 2 not sold). How can u do that report?(apart from Product normal dimension are there,we have a data warehouse for all)
Thanks

Hi, I agree with Gerd - there's not much tuning you can do in Web Analysis (as compared to FR).
In looking at the query see if you can:
- move single hierarchy members into the POV
- have children and parent in the same row
- arrange dimensions in inverse outline order (faster for essbase retrieves)
- remove excessive formatting/suppression (or conditional formatting/suppression)
- push report calculations back to the data source
We have also found that using lots of dynamically calculated members also slows down reports, so try and limit the number of these.
Maybe build your report up from the basic report to see which dimensions are causing the issue. Or alternatively start with your report and remove columns ;-)
With regard to wishing to show only 2 items, you could add advanced conditional suppression to suppress rows with values.

Problem with Web Analysis

Hi,
With the help from some of the experts in this forum, I have finished installing and configuring the following 3 Hyperion 9.3.1 products (in this order) on our Windows 2003 development server.
V11229-01.zip (Hyperion Shared Services)
V11207-01.zip (Hyperion Reporting and Analysis - Services Release)
V11223-01.zip (Hyperion Reporting and Analysis - UI Services Release)
The backend is an Oracle 10g database.
I can successfully log into
(1) Shared Services @ http://localhost:58080/interop as admin/<default password>
(2) Web Analysis @ http://localhost:16000/WebAnalysis/WebAnalysis.jsp with the same userid/password (that I used to log into Shared Services)
(3) Workspace @ http://localhost:45000/workspace/index.jsp with the same userid/password (that I used to log into Shared Services)
This tells me I probably configured these componently correctly.
However, it seems that I cannot do something basic in Web Analysis Studio. For Example, if I try to do
File->New->Document Wizard, most of the menu options under "File" are grayed out.
To be precise, the following options under "File" are grayed out.
New, Open, Edit, Close, Close All, Save, SAve As, SAve as HTML, Properties, IMport, Export, Email As LInk, Print
so, I could not even do File->New.
In fact, the "Edit", "View" and "Display" menu items in the menu bar are grayed out as well.
As you can see, I can do very little in the Web Analysis Studio (I am logged in as admin user, which is the only user now).
Is this a permission issue? or did I fail to install some necessary components?
Also, in this forum, how do I post a screen capture (saved as an image)?
thanks in advance for your help.
ST

Hi,
pls. try to give admin user more rights (Provision to "Report Designer" or "BIPlus Administrator" - I dont know exactly which roles are available concerning BI Plus suite).
Kind regards
André

Output from Web Analysis Related Content will not Export to Excel

I have Web Analysis reports, data in which is sourced from an EIS database. I have drill thru reports that are accessible from "Related Content". The resulting report is created fine, but cannot be exported into Excel. Specifically, I'm prompted for the location of Excel on my pc. Once I browse to it, it will open in Excel.
I have upgraded from Office 10 to Office 12, although I cannot say for certain that is when this problem started occurring.
Secondly, there are no other BI+ issues with export to Excel. For example, FR and WA export fine. The ExcelPath in the webanalysis.properties file takes care of that. I'm hoping there is something similar to update for this problem.
Thanks for reading, hopefully someone else has encountered this and successfully resolved. BI+ version is 9.3.1.

Have you tried the print button in the web analyzer it does export the input filter parameters as part of the exported PDF document.
You can include any additional text elements and use a custom export template if required.

Hyperion Planning - Link a web analysis report in a data form

Hi all,
is actually possible to link a web analysis report in a planning data form? I tried from a custom menu but discovered that isn't possible. Any other way?
I'm working with Planning 11.1.2.1
Thanks

Hi Raffounz
Indeed, it is possible to link a web analysis report in a planning custom menu.
Follow this procedure :
- From the explorer :
-> Go to the folder where your web analysis report is stored
-> Right click on the document and left click on "properties"
-> Copy the "smartCut" link
- From your planning application :
-> Edit the menu where you want to link your webanalysis report :
-> Create a URL item and past the link in the input field
Cheers

Error while operating Web analysis report in Workspace

I have created a web analysis report in which i have provided buttons, on the click event of button it must open a link provided.This button is working fine when opened using Web Analysis studio but on running this report in workspace, when i press the button i get this error "This Service is not supported by the HTML client".
Please help.

Have you tried checking the "Design for HTML" from the Edit toolbar to see if you get any error when saving?
Do you have any advanced items on the report, as there are 4 types of differences between Studio and HTML:
- font differences, Workspace (DHTML) uses the WA Server fonts whereas WA Studio client machine fonts.
- Service Buttons are very restricted using Workspace
- Display: Tab selection, Splitter panels, Slider selection do not render in Workspace
- Cannot restrict WA Tools menu in Workspace at all, where you can in the Studio.
For exact details check out the Hyperion Web Analysis Studio User’s Guide from the Doc Library:
http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_4.htm

Web Analysis Report performance

Hi All,
We are performing a drill to bottom level action by double click the account dimension in Web Analysis and SmartView. It will returns 9000+ rows records. In WA, it takes 160 seconds but SmartView only takes 20 seconds. We tried to increase the Java Heap Size from the WA Application Server and Java Plug-In Client but doesn't help much. Any idea why their is a big difference in performance? From the application log file in Essbase, we can see WA and SmartView are talking to Essbase in two different syntax.
Thanks,
Manoj

Hi, I agree with Gerd - there's not much tuning you can do in Web Analysis (as compared to FR).
In looking at the query see if you can:
- move single hierarchy members into the POV
- have children and parent in the same row
- arrange dimensions in inverse outline order (faster for essbase retrieves)
- remove excessive formatting/suppression (or conditional formatting/suppression)
- push report calculations back to the data source
We have also found that using lots of dynamically calculated members also slows down reports, so try and limit the number of these.
Maybe build your report up from the basic report to see which dimensions are causing the issue. Or alternatively start with your report and remove columns ;-)
With regard to wishing to show only 2 items, you could add advanced conditional suppression to suppress rows with values.

Wrapping text at Web Analysis Item

Similar Messages

Maybe you are looking for