WRE54G after reset only 1 blue light, no activity light

I have spent a lot of frustrating hours trying to setup my newly bought expander WRE54G.
Issues:
1. I could not find my expander by typing 192.168.1.240
2. So, I tried one of the reset tips I found here, by holding the reset button for 30 seconds, unplug it while pressing down reset, wait 15 secs, while holding reset and turn on power again, and then wait further 10 seconds.
3. After having tried this, when I turn it on, there is only one blue light on the link button, no light on the activity, and I could not see my expander at all on the wifi network. (A normal reset would give me a red light on the link & a blue flashing light on the activity, and I was able to see my expander on the network)
Is there any way to undo what I did with the reset tip? I really want to restore it to factory defaults.
My WRE54G does not say whether it is V1 or V2, so I guess it is V1?
Anyone please help!!!

Did you ever get this issue resolved? I am having the same issue.
(Edited post for guideline compliance. Thanks!)
Message Edited by JOHNDOE_06 on 09-18-2007 10:43 AM

Similar Messages

CAN'T SEE DESKTOP AFTER LOGON, ONLY BLUE BACKGROUND AFTER PROMOTE A DOMAIN CONTROLER

Hi, my name is Omar
I promoted two domain controllers yesterday with Windows Server 2008 R2. Both work fine as a domain controllers role but when I logon, I can't see desktop, I only see a blue background, I 'cant see any desktop Icon. We have already had that problem and i
remember that we change a value on a registry key but i can't remeber what was exactly.
Thanks for your assistance
ovazquez

Hi,
Thank you for posting in Windows Server Forum.
Firstly please update the driver and in addition you can try below registry workaround.
To do this, change the value of the following registry subkeys to 3 (Manual) or 4 (Disabled)：
•HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\cdrom
Name: Start
Type : REG_DWORD
Data: 3 or 4
•HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\parport
Name: Start
Type : REG_DWORD
Data: 3 or 4
Note: If the above registry is changed to 4 (Disabled), the related device is not usable because a driver used in the device is not loaded. Therefore, if the device will be used in the future, the above registry should be set as 3 (Manual).
More information.
1.KB 933757
2. Event ID 7026 — Basic Service Control Manager Operations
Hope it helps!
Thanks.
Dharmesh Solanki

Only link light is lit blue; activity light unlit

A blue light appears only on the "Link" LED and the Activity light is unlit. The strength of connection is extremely low and sometimes nonexistent. What do I do. Also, when the range extender has been unplugged to reset in the past, it takes several attempts when plugged in to get it to light any lights. Don't know if this is related - perhaps defective range extender?

You need to reset the Range Expander to factory settings and then re-configure it...Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your Range Expander, wait for 30 seconds and re-connect the power cable...
To re-configure the Range Expander you may follow this link
Make sure you have identical Wireless Settings on your Range Expander and your Wireless Router...Also your Range Expander should be set to Static IP Address that mathces your router subnet...Do not forget to power cycle both the devices once configured...

HT201263 my ipod touch 4th gen isnt work after a long time with 0 percent battery power.Then its not working. computer doesnt respond to my ipod .only black screen is appearing it even not wake up after reset it what can i do please help me

my ipod touch 4th gen isnt work after a long time with 0 percent battery power.Then its not working. computer doesnt respond to my ipod .only black screen is appearing it even not wake up after reset it what can i do please help me

After being connected to a charging source overnight try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Reset after some predefined time of no activity.

Hi, we are setting up Firefox as a Kiosk application.
CU is asking the session would be reset (=firefox restart) after a predefined time of no activity by the user, so whatever page the browser is left, after some amount of inactivity it returns to its home page.
One way to do that could be to add some extensions to Firefox (https://addons.mozilla.org/it/firefox/addon/616), but I am guessing if there is any timeout value I can set on Sun Ray Server and which is the recommended way to do that.
MTIA

Thanks for your answers.
I've been tracing the execution and I've found out that I don't get that exception (sorry, when I said I got it, it was due to a different matter). In fact I don't get any exception at all, but it doesn't work out.
I've been checking my code and don't close the socket myself at any point and the other end doesn't close it, either. I have no clue about what the reason of the problem is: it just stop answering.
I'm working on sending PING messages to the client so it isn't inactive so long. Perhaps this will solve the problem, but I still wonder what the cause is.
Can you give any advice?

After updating to 1.2 then restarted, I have seen only blue screen

I have seen only blue screen after Apple logo startup, and now it is stuck like that. Nothing happen anymore. What a bad luck I am with this new iMac, I have to hand in my assignments in 2 days and I cannot even go to finder. If i can do that at least I will copy them to my old Powerbook. What the @#$%^&*( is happening with new iMac. I also have a bad experience with freezing problem many times a day, and I have made my mind to live with it until now. I cannot do anything unless typing a problem on my old lovely powerbook. Please help me, I need those assignments to submit to my professors.

From the number of posts regarding the same issue with 1.2 and any ipod with a color display (both my ipod nano and video ipod crapped out), there is obviously a serious bug with this "upgrade."
I agree we should give them a chance, but I find it unacceptable that after this amount of time that the Applecare support technicians, up to TIER 3, have never even heard of this issue. They wanted me to return my ipod(s) in for factory service even after I numerously reminded them that they both work perfectly once downgrading to 1.1.1!
I am a long-time apple-geek, but this issue upsets me because it is so uncharacteristic of the standards of excellence Apple has always provided, and smacks of the pervasive frustration we all deal with when using Microsoft products.
......and it is especially frustrating that all of the purchases I excitedly bought once videos are now provided at 640x480 resolution are not playable with version 1.1.
But with version 1.2, the higher resoultion videos are transferable to the ipod, but no videos are playable due to this firmware incompatibilty.
Apple: do you read these discussion forums??

After resetting ipad, unable to get to home screen. Only displays request to attach to Itunes, which I did. What next?

after resetting ipad and removing all programs, cannot get to home screen. Only get request to plug in to itumes,which I did, and it still goes back to that, and the apple logo.

The message means that you need to restore the iPad using iTunes. When you connect the iPad to your computer and launch iTunes, if you cannot see the iPad under the devices heading in the sidebar of iTunes, you wll have to restore using recovery mode. If you see the iPad under the devices heading, click on it and then click on the summary tab on the right and click on restore.
If that doesn't work, this is how to restore with recovery mode.
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.
If you are running iTunes 11 - and you can't see the sidebar - to to View>Show Sidebar from the iTunes menu at the top of the screen.

My mac mini only shows a steady power light and fan noise when powered up. No video or sound and no commumication with wired keyboard or optical mouse. Tried replacing internal battery and resetting PMU/SMC but nothing seemed to happen. Any suggestions?

My mac mini only shows a steady power light and fan noise when powered up. No video or sound and no commumication with wired keyboard or optical mouse. Tried replacing internal battery and resetting PMU/SMC but nothing seemed to happen. Any suggestions? Many thanks! Richard

You've already done the two things I would have suggested.
If your Mini has an internal battery then I assume it's a G4. That means you've gotten a lot of good years of service from it, and it's old enough that it's certainly not covered by AppleCare anymore, and it's probably not worth spending money trying to repair it.
You should be able to tear it apart using instructions from ifixit.com to get the hard drive out, and then put the hard drive into a nice USB or FireWire enclosure (I like the ones from Other World Computing, macsales.com) so you can transfer your data to a replacement Mac.
I hope someone has another suggestion for you.

I forgot my apple id after resetting my ipad i only know the id which was linked to it

i forgot my apple id after resetting my ipad and i entered wrong id and passcode several times so my id is now locked i only know the id which was licked to it. please help me in starting my ipad...

Follow the instructions > iOS: Forgotten passcode or device disabled after entering wrong passcode

5545 'Active' light is on for 1 HA unit only..is that normal?

We have 2 Cisco 5545s in an HA/failover configuration. One has an ‘Active’ light on, the other does not...is this normal? Does it mean the one with the light on is currently 'Active' member of HA pair?

Hey Andre, tx for the fast response. :)
Yes, this is an Active/Standby install...you have confirmed my suspicion's..tx!
I'm remote from these devices(which resides in data center). The client wrote back stating that it was the orange/red 'Alarm' light that was on only on the current Standby unit that they were concerned with. But everything looks fine from what I can tell.
What does the Alarm light on typically signal? Thinking maybe HDD errors? , physically memory fault?
Thoughts?
Cheers

Cannot get wifi or blue tooth on 4s even after resetting network settingse

Cannot get wifi or blue tooth on iPhone 4s even after resetting network settings.

iOS: Troubleshooting Wi-Fi networks and connections

HT4262 After resetting our Airport Express, only one of our wider network is able to login to the network. Please offer solutions to return to multiple logins?

After resetting our Airport Express, only one of our wider network is able to login to the network. Please offer solutions to return to multiple logins?
In mean time, I'll attempt the Utility Software.
Cheers,
Tony Harewood

Issue has been solved - no action required.

Activation problem of iphone5 after reset

after reseting my iphone 5 i tried to activate it but its telling me repeatedly to try again server not availabdle

Hi,
There is a posibility of form not being generated if the form is very big or system is very slow.
If the form takes more time to generate and if the session expires the form won't be generated in foreground.
So, try to generate the from in the backgound. Run and Submit the program SF_BATCH_GENERATE giving the form name.
Regards,
Satish.

Two questions, does resetting the Mac Book Pro late 2008 speed up after reset? Also, do i need to remove my WLAN router and get only a plain MODEM when setting up my AIR PORT time machine?

Two questions, does resetting my Mac Book Pro late 2008 speed up after resetting? Also, do i need to get rid of my WLAN router to make my AIR PORT time capsule work?
Am grateful for any answers...its a 15,4"...
Will soon buy a new one, is battery better on 13 than 15 "?
Have a great day...

If you mean restoring OS X, that won't necessarily have any effect on speed.
Not enough free space on the startup disk can slow your Mac down.
Click your Apple menu  top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space.
More tips here > Mac troubleshooting: What to do when your computer is too slow | Macworld
No need for the WLAN router with AirPort Time Capsule.

Intel Xserve No Activity Lights

Hey I'm trying to find out what could be wrong with our new Intel Xserve. It's fresh out of the box and set up on it's rack. We try to turn it on and it looks as if everything is well but the blue activity lights don't come on. We tried changing the startup method, and that doesn't work either. Anyone have any ideas?
BTW, this is my first post. Glad to be here!
Intel Xserve

Hey there,
Welcome to the board..
Had exactly the same problem 3 weeks ago. I pulled the thing completely apart and rebuilt and reset all the hard reset buttons inside. Still no joy. Had a spare's kit so replaced the logic board and away it went perfectly. Spoke to Apple techincal and they replaced the logic board from my spare's kit. They offered to swap the entire machine but time was not on my side so this was the quicked way to solve the issue. I did spend 1 hour on the phone to them to check and they agreed with my prognosis. Interested to know if you get any further with yours than I did - fingers crossed for you. Guessing there was a dud batch or similar.
Oli

WRE54G after reset only 1 blue light, no activity light

Similar Messages

Maybe you are looking for