WRE54G - Computer IP replaces Expander IP -- WPC - What Version?

I got a WRE54G V.3 last week and have been trying to connect it to a 2WIRE (2701HG-B) router since then. I thought I got it working the other night but have discovered a problem since then. When I try to use 2 computers at once with the range expander only one will work. After a little investigation, I noticed that the IP address for the expander that shows up on the 'device list' of the router is the IP address of the computer that is connected through the expander. The 'device list' says that the IP address for the computer is 'not set'. The router also does not see the name of the expander. Instead of showing the name I assigned it, it says 'unknown' followed by the expanders MAC address. I did uploaded the latest Firmware, so that’s not the problem. Its like the router doesn't know the expander is there and that the expander is acting like a high powered antenna connected to only one active computer. Does anyone have any idea how to fix this? Also, when I originally used the 'setup disk' for the WRE it messed up all of my connection configurations which made me have to reinstall both my wireless and Ethernet adapter drivers. I have a WPC54G wireless adapter for my laptop but it doesn't say specifically what version it is. The FCC ID is PKW-WPC54G-2 so I guessed that it is a version 2 and reinstalled the latest drivers offered for version 2. Was I correct in assuming that the card is a version 2? The new driver I installed came with a Linksys utility to find networks but its not working and I prefer to use the Windows wireless configuration utility. To use the windows utility I check the box on the properties page for the wireless connection but it will switch back to the Linksys utility and stop working by itself. Is there anyway to use the driver but use the Windows utility as your default? To summarize: 1. How do I fix the IP problems for the WRE54G? 2. Is my WPC54G version 2? 3. Can I set the 'Windows Wireless Network Configuration Utility' as my default utility with the new WPC54G Driver (6.0.0.18 8/26/2004), or do I have to use the Linksys utility?

Answer 1 : Really not quite sure about this ....
Answer 2 : turn the card upside down and check the model number .. the model number would be WPC54G and if there v2/v3/v4 after it it means that the card is version 1 ....
Answer 3: As you windows xp , go to start >> programs >> uninstall wireless notebook adapter.... insert the CD for the adapter ...take the card out and insert it back again.... follow the instructions on the found new hardware wizard ... this will install the drivers for the adapter and then you can use the windows wireless configuration utility to connect to the wireless network ....

Similar Messages

I had to uninstall firefox since it was causing so many problems with my computer. I was using the latest version 18. What is the problem?

I have had nothing but problems since I installed the latest version of Firefox version 18. It hangs up my computer no matter what I am doing. Even if I am not using the browser. I uninstalled it three times and the problems just seemed to be getting worse. I finally uninstalled it and did not reinstall it again. I am not going to use it again until the problems are fixed. I also don't know what funmoods is or whatever it is that replaced my google home page. I don't like software deciding what services I should use. I have been a firefox user for over 15 years. I have never had problems like this before. I have switched to Safari. It works without interfering with the other tasks I am doing on my computer. I don't know what version 18 did but the previous version of firefox I was using was perfectly fine. I had no problems whatsoever with it. It appears as if this version was not sufficiently tested. Also my daughter is having the same problems with her computer and they all started with the new version. So it isn't just me. At least give us the option of going back to the previous version and asking us if we want to upgrade when a new one comes out. However, I have never had these problems in the past with any version of firefox I installed. I like the features of firefox but cannot afford to keep rebooting my computer. It seems that firefox gets hung up and then hangs the computer up and I can't do anything else even if I am not using it. It seems to stay on in the background and hang everything up. Please fix this.

It most definitely is the browser that is causing most of the problems. I have used Firefox so long, I can't even remember. Maybe since its beginning. But today is a sad day. I gave up on it. I can't accomplish anything and end up spending hours troubleshooting. I see I am not alone. I am so sick of it "not responding." It's simply not worth it to spend so much time trying to make the thing work, so I can actually do something. Installed, removed, reinstalled numerous times, and I can't fix your software on my Win 7 Pro machine. No problems with IE or Chrome. So. as much as I hate Google Update, Chrome has won the test. Sad, sad day for me to lose Firefox, but it just does not work on the Win 7 machine. I don't have the same issues with the XP machine and have exactly all the same add-ons. Keep it up developers and you will have no Win 7 users at all.

I have a work Mac, an air book, a home Mac; husband has desktop and laptop. That makes 5. My work computer was replaced and I do not know what the company did with it. I am not allowed to deauthorize all. Any way around the year limit?

I have a work Mac, an air book, a home Mac; husband has desktop and laptop. That makes 5. My work computer was replaced and I do not know what the company did with it. I am not allowed to deauthorize all because I did this within the last year when I got my new airbook. Any way around the year limit? I don't know if I can find my old computer and I don't want to wait months to be able to play my ituens purchases on my new work computer.

If oyu already used up your "deauthorize all" option, you need to contact support so they can make an excemption:
http://www.apple.com/support/itunes/contact/

RE: Syncing to a "New" Computer or replacing a "crashed" Hard Drive by wjosten

I really appreciate the detail that wjosten provides on the User Tip entitled "Syncing to a New Computer or Replacing a crashed hard drive". I do have a follow up question though about my wife's iPhone 4 running iOS 5.1.1. All her calendar and contacts are on the Cloud - not running through anything like Outlook or Windows Address Book, as far as I can tell. In the past, we previously synched with a PC.
Since the calendar and contacts are on the Cloud, can we synch using the steps wjosten details on a new PC and not lose the calendar / contacts? If not, do you have any advise? Thanks.

If she doesn't want to sync her calendar and contacts with a supported program on her computer such as Outlook, just uncheck Sync Calendar and Sync Contacts on the Info tab of her iTunes sync setting before syncing (which I assume is what she was doing before). She can continue to sync these with iCloud if that what she prefers by going to Settings>iCloud and turning Contacts and Calendars to On).

Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?

Like the topic - "Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?"
I installed this OS, and it looks nice, but it's terrible to use. I randomly have the volume controls get disabled, and sometimes the volume menu in the system tray does nothing when adjusted which I've never seen in an OS before. The trash won't empty. When I try to drag and drop newer files over existing ones, nothing happens. The old ones just stay there. I have to delete the old ones and then move the new ones. And when I go into the protected files to manage audio plugins (I make music), the first thing I hit are error codes galore, and password prompts that either don't popup when they should, or don't execute the command after I provide my password.
What can I do now that I installed the flames of **** onto my computer?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

I uploded the new itunes software and now my ipod touch is not getting reconized in my itunes. I went through all the trouble shooting support from apple. But I do have a avast antivirus on my computer i wonder if that is what is holding it up

I uploded the new itunes software and now my ipod touch is not getting reconized in my itunes. I went through all the trouble shooting support from apple. But I do have a avast antivirus on my computer i wonder if that is what is holding it up

Could be since it (security software) is listed as #5 in the following:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

How do i move ipod nano content to a new Windows computer? My old computer died and when i try to sync to itunes on my new Windows computer, it says it will erase what's on the ipod. I can't seem to de-authorize the old computer (it's been recycled).

Hi, I'm an ipod newbie, and unsure of what product i have-i believe it's an ipod nano, but can't seem to find any info on itunes that will identify my product.
how do i move ipod nano music to a new Windows 7 computer? My old computer died and when i try to sync to itunes on my new Windows computer, it says it will erase what's on the ipod. I can't seem to de-authorize the old computer (it's been recycled). Does this mean I have to start all over and read in my CD's into itunes? seems very inflexible/inelegant...
thanks for your help, sorry if this question has already been answered before!

Is there no ANSWER TO THIS PROBLEM?

Not printing text-only graphics on Canon. Not printer problem-print ok on Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Not printing text only on Canon--grahics print ok. Not printer problem. Prints ok on a Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Without your printer model numbers, readers can only give you vague general directions.
System Preferences > Print&Fax > ...
... shows a list of all set-up printers.
If you are having serious problems, it makes sense to "Reset the Printing System" (which also removes all printer set-ups) and add back each printer. It only takes a few minutes.
Mac OS X 10.6 Help: Resetting the printing system

I updated my iTunes as it asked me to and restarted the computer but iTunes gives me a corruption error and it downloaded a PC speed maximizer on my computer. I have no idea what this new software is and I have no idea how to get iTunes to work.

I updated my iTunes as it asked me to and then restarted my computer but iTunes would not open as it said it was corrupted. In addition as I was downloading the new iTunes a PC speed maximizer was downloaded onto my computer and I have no idea what for.

Grappler1261 wrote:
I updated my iTunes as it asked me to and then restarted my computer but iTunes would not open as it said it was corrupted.
See Install & Update here > http://www.apple.com/support/itunes/install/
Also see Downloading Content in the same link.

My old computer had itunes and downloaded songs that I put on my ipod. My old computer got replaced years ago without saving hard drive info or passwords and my iPod burnt out and will not activate. How can I get access to my old songs on new computer.

My old computer had itunes and downloaded songs that I put on my ipod. Well, my old computer got replaced years ago without saving hard drive info or passwords and my iPod burnt out years ago and will not activate. I now have a new computer and iPod and I have an iTunes account on my iPhone5. How can I get access to my old songs on new computer? Are they lost for good? I have no info about my old computer and old account.

Downloading past purchases from the App Store ... - Support - Apple

I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple.

How do I transfer music from my ipod to my computer without replacing the music on my ipod with the music on my computer?

How do I transfer music from my ipod to my computer without replacing the music on my ipod with the music on my computer?

You can't do that with iTunes (except for songs you purchased from the iTunes Store). However, there are third-party methods and utilities that can transfer songs files from iPod to computer. If you do a Google search on something like "ipod transfer," you should get some links.
Once the songs files are on your computer, add them to your iTunes library. Then, you can sync your iPod to that iTunes library, as desired.

When i pluged in my ipod,computer start scanning,it says"your computer is no more authorized for app that are installed in"yadav ipod",would you like to authorizes this computer for item purchased from itune" what should i do to fix this problem,,,

when i pluged in my ipod,computer start scanning,without finishing scan,it says"your computer is no more authorized for app that are installed in"yadav ipod",would you like to authorizes this computer for item purchased from itune" what should i do to fix this problem,,,

What the message says. In iTunes g the the Store tab in ther upper part of the screen and then clink on Authorize this computer.

I downloaded eminems new album and two of the songs on the album wont play at all every time i try to play them itunes asks for me to autherize my computer when it already is autherized what do i do

I'm having trouble with eminems new album I downloaded it and two of the songs wont play at all every time i try to it asks me to athourize my computer again when it already is what do i do?

Delete and redownload them if doing so is free in your country.
(100771)

I bought a new computer, and iTunes doesn't have my music or anything on there. I want to get everything on my iPhone to my new computer/itunes. But no matter what i do, it won't let me. My desktop has everything, and I want all that on my laptop..

I bought a new computer, and downloaded iTunes, therefore the new itunes doesn't have my music or anything on there. I want to get everything on my iPhone to my new computer/itunes. But no matter what I do, it won't let me. My desktop has everything that my phone has on it, I just want it all moved to my laptop. Does that make sense? I could really use some help. I don't live with this desktop anymore so I need to be able to use my laptops itunes. Please help me. Thanks in advance!

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then seeRecover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

WRE54G - Computer IP replaces Expander IP -- WPC - What Version?

Similar Messages

Maybe you are looking for