WRE54G Network Monitor

I'm trying to trouble shoot some connection issues and want to upgrade my WRE54G Expander's firmware. I've downloaded the firmware file and the setup wizard, but steps provided by the support site say that I need to connect to my range expander via the Linksys Wireless Network Monitor. Unfortunately neither my product CD or the downloadable setup wizard provide this utility. How do I acquire it?
Thanks,

1. Connect your Expander to a computer, click on the Start button >>> Settings >>>Control Panel >>> Network Connections - Right click on the icon for Local area connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the following IP address'- Provide IP Address - 192.168.1.5, Subnet Mask - 255.255.255.0. Default Gateway - 192.168.1.240. Click on Ok button to Save and Click on "Close" on main Properties window. Click here for more information about assigning a Static IP Address on a Wired Computer.
2. Now open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.240. Leave the User name blank & in Password use admin in lower case. It should open your Expander set-up.
3. Once you get to the set-up page go to the Help tab. On that page you will find the option to upgrade the Firmware of the Range Expander. When you click on Firmware upgrade, it will open another pop up window. Browse the Firmware file that you have already downloaded from the Linksys website and click on upgrade.
4. After upgrading the Firmware of the range expander, it is recommended that you hould reset the range expander to the factory default settings. Then try to reconfigure the range expander.

Similar Messages

Error message when trying login to Network Monitor "oops something went wrong"

I am trying to get network monitor to work on my network. However, when installed I enter my credentials and get the error something went wrong. I am assuming we are blocking some traffic on the firewall or possibly even through a content filter. What I don't know is what url needs to be white-listed or which ports need to be opened for the application to work.
Firewall is off on the pc. I can authenticate when on a standard "outside link" But cannot when the same pc is on the LAN at work. Any suggestions would be greatly appreciated!
This topic first appeared in the Spiceworks Community

Please, run the DirectX diagnostics tool (32-bit version).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Spiceworks Network Monitor not working after upgrading to version 1.2

It's the same with my upgrade. Look like we need some oil and vinegar for the pepper ;)

Hello,
I received the email informing the availability of the new release of Network Monitor. After upgrading, the web console locks at below step:
The above issue persists whatever restarting the services or rebooting the computer hosting this service.
I also noticed that the size of this release is 682KB which is obviously small compare to old version:
Anyone else experiences the same issue?
Thanks
This topic first appeared in the Spiceworks Community

XFCE network monitor applet

XFCE has this nice network monitor applet, in which you can set the colors of the incoming and outgoing bar. The only problem is that they don't seem to have any effect. Mine stay blue. I'm guessing the global color scheme is interfering somehow... Any solution for this problem?

This is awesome, thank you for contributing this.

Performance of Network Monitoring in SCOM 2012 SP1

Hi all!
I´ve problems with performance of the network monitoring feature in SCOM 2012 SP1.
According to the
guide the following should be adeqate:
•1000 network devices (approximately 12,500 monitored ports) managed by a resource pool that has three or more management servers
•500 network devices (approximately 6,250 monitored ports) managed by a resource pool that has two or more gateway servers
We have 800 network devices with a total of 24000 ports,
BUT only 1500 of them are monitored. This is basically what happens automatically after discovery, since only ports between monitored devices are monitored by default.
For this setup I first used only one management server dedicated to the Network Pool,
based on my assumption that if two servers could monitor 6250 ports, one server would be more than enough for 1500. I found this configuration working very poorly so I added another server. I now have two servers
dedicated for the Network Resource Pool. (They are NOT members of the “All management servers resource pool”)
Still, I get constant alerts regarding Health Services Private Bytes on these servers. They vary between 1-2Gbytes. Furthermore, if one of the servers goes offline, the network devices that was monitored by that server becomes grey for
several hours. Even if the server only is rebooted it takes forever to get everything online and green again.
I don´t really know what I should do now. I had a plan to replace our current network monitoring system (SNMPc) which easily handles this load on only one server. They are of course completely different beasts, but still. SCOM seems to
require a massive back-end to produce equivalent real life results.
Any suggestions or reflections from the field are highly appreciated!
Regards
Peter

Hi,
Try to overide the monitor Health Services Private Bytes by the following steps.
◾Go Authoring space – Management Pack Objects – Monitors
◾Go to change scope – select clear all – look for Health Service – tick it and press OK.
◾Expand Health Service – expand Entity Health – expand Performance – expand Health Service Performance
◾Select the Health Health Service Private Bytes Threshold.
◾Right click the mouse and choose to overide the monitor for a group
◾Select the group called Management Server Computer Group and press OK
◾Select the Agent Performance Monitor Type – Threshold and change the value 104857600 to ex. 2610612736.
◾Select to store the overide in a management pack you have created and press OK
Juke Chou
TechNet Community Support

Is there a way to export Network Monitor information?

We have some users reporting intermediate latency issues that clear up before we can log into their systems. I was wondering if there was a way to export Network Monitor information to help troubleshoot the issue.

I've called the big guys to help you. Good luck.

How can i do this, Check to see if you have any network monitoring software that might be using your iCloud account

How can i do this, Check to see if you have any network monitoring software that might be using your iCloud account to automatically send messages, such as firewalls or internet security software configured to send an alert when a potential security issue

you can try:
*Wireshark: http://www.wireshark.org/download.html

SCOM 2012 Network Monitoring Does Not Show Servers

We are testing out the network monitoring piece in SCOM 2012 but for some reason it never does show the servers. We have a test switch with a monitored server connected directly to it but after the discovery completes it doesn't show the server as
being connected. The switch in question is a Juniper and if you look at the diagram view for the device it does show all of the ports under "not monitored" and the Processor and Memory under "Healthy." The following event sequence shows up in the
"Network Discovery Progress Events" view:
Full Discovery Started for 1 request(s)
Proceeding to discover all systems in repository
Probing <<IP Address 1>>
Probing <<IP Address 2>>
Probing completed for <<IP Address 2>>
PostProcessing started
Probing completed for <<IP Address 1>>
PostProcessing completed
Switch::<<IP Address 2>> discovered successfully
Switch::<<IP Address 1>> discovered successfully
Discovery Completed / Devices discovered: 2 / Windows computers filtered: 0 / Devices in pending list: 0 / Devices excluded: 0
No devices were found in filtered list after discovery
Start processing connections to computers
Finished processing connections to computers. Number of connections made: 0
I've been trying to find some documentation on any other settings that are required to get network monitoring to work as advertised but so far I have struck out. Help!

Sorry Matt - you did say that very clearly in your previous post. I'll try and do better this time ;-)
From here:
http://technet.microsoft.com/en-us/library/hh212935.aspx
From here:
http://blogs.technet.com/b/momteam/archive/2011/09/20/what-gets-monitored-with-system-center-operations-manager-2012-network-monitoring.aspx
"An agent computer that is directly connected to a device will have the connecting interface added to this group. For this to work the management group must have the Windows Operating System management pack for the agent’s operating system, the Windows
Client Network Discovery management pack and the Windows Server Network Discovery management pack. The full discovery of the agent’s operating system has to be completed including the discovery of the agent’s network adapters. Then when network discovery
runs for the device it should stitch the port on the device to the network adapter on the computer and add the port to this group."
So possibly:
- check the management packs specified are imported
- check the the agents network adapters have been discovered
From here -
http://technet.microsoft.com/en-us/library/hh212935.aspx - it is also possible to do this for non-scom monitored servers.
"Ports that are connected to a computer are not monitored; only ports that connect to other network devices are monitored. You can monitor a port that is connected to a computer that is not agent-managed in the same management group by adding the port to
the Critical Network Adapters Group."
Cheers
Graham
Regards Graham New System Center 2012 Blog! -
http://www.systemcentersolutions.co.uk
View OpsMgr tips and tricks at
http://systemcentersolutions.wordpress.com/

Basic Network Monitoring for Cisco Operation Manager 2012

Hello,
Please bear with me as i'm new the Operations Manager 2012 world. I've just installed operations manager 2012 in our environment and i've setup a network management point. I've discovered my networking gear which is primarily cisco equipment. The devices
are appearing as CERTIFIED. It appears that they are HEALTHY however in most cases i'm getting some arbitrary monitors. I have a 6509 switch where memory and processor appear to be being monitored out of the box. I'm receiving alerts and everything.
My question is how do I turn on monitoring for other discovered components. I seem to understand I can make SNMP monitors under the authoring pane if i know the OID. That sounds like it'd be tedious work for such a simple and basic monitor. However I was
under the impression I would be able to monitor a lot of these components with a simple click of a button. Is this not the case? I'm primarily interested in monitoring the state and performance of particular interfaces as well as the state of the power supplies
in our switches. Is there a guide that explains the basic principles of this. What are my options?
Thanks!
-Brandon

Hi,
You will need to edit the discovery and broaden the range. You may use recursive discovery.
Recursive discovery will try to discover any other network devices it knows about through its Address Routing Protocol (ARP) table, its IP address table, or the topology Management Information Block (MIB) to grow the network map and present all applicable
devices to you for monitoring.
You can also filter out devices that you don't want to be discovered by using properties such as the device type, name, and object identifier (OID). This is a handy option if you wanted to quickly discover all the network devices in your network except,
a small number or some with a specific criteria.
In really large networks with a lot of network devices, keep in mind that there is a default limit of 1500 network devices that can be discovered recursively. You can of course tweak this limit to suit your environment if you wish, but for most people, this
won't be needed.
More details, please go through the article below:
http://kevingreeneitblog.blogspot.com/2012/07/scom-2012-network-monitoring-explicit.html
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

OCEP for Network monitoring

Hello everyone,
I am trying to build a network monitor which tries to filter critical mails using OCEP. I am using wireshark which writes the file to a csv file dynamically. I have created a csvgen adapter for input in OCEP. Currently I am just trying to take source ip address to csvgen adapter (declared ipaddress as char of length 10). I am getting error when I am trying to deploy the jar. This is the log:
file:/C:/Oracle/Middleware/user_projects/domains/ocep_domain/defaultserver/applications/NetworkAnalyser/NetworkAnalyser.jar with version 1331525345563>
####<12 Mar, 2012 4:09:08 AM GMT> <Error> <Deployment> <> <myServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1331525348514> <BEA-2045010> <The application context "NetworkAnalyser" could not be started: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'loadgenAdapter': Cannot resolve reference to bean 'FilterNetworkPackets' while setting bean property 'listeners' with key [0]; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'FilterNetworkPackets': Initialization of bean failed; nested exception is org.springframework.beans.TypeMismatchException: Failed to convert property value of type [$Proxy386 implementing com.bea.wlevs.ede.api.Stage] to required type [com.bea.wlevs.ede.spi.EventManagerAccessor] for property 'source'; nested exception is java.lang.IllegalArgumentException: Cannot convert value of type [$Proxy386 implementing com.bea.wlevs.ede.api.Stage] to required type [com.bea.wlevs.ede.spi.EventManagerAccessor] for property 'source': no matching editors or conversion strategy found
org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'loadgenAdapter': Cannot resolve reference to bean 'FilterNetworkPackets' while setting bean property 'listeners' with key [0]; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'FilterNetworkPackets': Initialization of bean failed; nested exception is org.springframework.beans.TypeMismatchException: Failed to convert property value of type [$Proxy386 implementing com.bea.wlevs.ede.api.Stage] to required type [com.bea.wlevs.ede.spi.EventManagerAccessor] for property 'source'; nested exception is java.lang.IllegalArgumentException: Cannot convert value of type [$Proxy386 implementing com.bea.wlevs.ede.api.Stage] to required type [com.bea.wlevs.ede.spi.EventManagerAccessor] for property 'source': no matching editors or conversion strategy found
     at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:275)
     at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
     at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveManagedList(BeanDefinitionValueResolver.java:287)
     at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:126)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
     at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
     at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
     at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
     at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:423)
     at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:729)
     at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext.access$1600(AbstractDelegatedExecutionApplicationContext.java:69)
     at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext$4.run(AbstractDelegatedExecutionApplicationContext.java:355)
     at org.springframework.osgi.util.internal.PrivilegedUtils.executeWithCustomTCCL(PrivilegedUtils.java:85)
     at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext.completeRefresh(AbstractDelegatedExecutionApplicationContext.java:320)
     at org.springframework.osgi.extender.internal.dependencies.startup.DependencyWaiterApplicationContextExecutor$CompleteRefreshTask.run(DependencyWaiterApplicationContextExecutor.java:139)
     at org.springframework.scheduling.commonj.DelegatingWork.run(DelegatingWork.java:62)
     at weblogic.work.commonj.CommonjWorkManagerImpl$WorkWithListener.run(CommonjWorkManagerImpl.java:204)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'FilterNetworkPackets': Initialization of bean failed; nested exception is org.springframework.beans.TypeMismatchException: Failed to convert property value of type [$Proxy386 implementing com.bea.wlevs.ede.api.Stage] to required type [com.bea.wlevs.ede.spi.EventManagerAccessor] for property 'source'; nested exception is java.lang.IllegalArgumentException: Cannot convert value of type [$Proxy386 implementing com.bea.wlevs.ede.api.Stage] to required type [com.bea.wlevs.ede.spi.EventManagerAccessor] for property 'source': no matching editors or conversion strategy found
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:480)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
     at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
     at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
     at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
     at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
     at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
     at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveManagedList(BeanDefinitionValueResolver.java:287)
     at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:126)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1011)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
     at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
     at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
     at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
     at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:423)
     at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:729)
     at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext.access$1600(AbstractDelegatedExecutionApplicationContext.java:69)
     at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext$4.run(AbstractDelegatedExecutionApplicationContext.java:355)
     at org.springframework.osgi.util.internal.PrivilegedUtils.executeWithCustomTCCL(PrivilegedUtils.java:85)
     at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext.completeRefresh(AbstractDelegatedExecutionApplicationContext.java:320)
     at org.springframework.osgi.extender.internal.dependencies.startup.DependencyWaiterApplicationContextExecutor$CompleteRefreshTask.run(DependencyWaiterApplicationContextExecutor.java:139)
     at org.springframework.scheduling.commonj.DelegatingWork.run(DelegatingWork.java:62)
     at weblogic.work.commonj.CommonjWorkManagerImpl$WorkWithListener.run(CommonjWorkManagerImpl.java:204)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: org.springframework.beans.TypeMismatchException: Failed to convert property value of type [$Proxy386 implementing com.bea.wlevs.ede.api.Stage] to required type [com.bea.wlevs.ede.spi.EventManagerAccessor] for property 'source'; nested exception is java.lang.IllegalArgumentException: Cannot convert value of type [$Proxy386 implementing com.bea.wlevs.ede.api.Stage] to required type [com.bea.wlevs.ede.spi.EventManagerAccessor] for property 'source': no matching editors or conversion strategy found
     at org.springframework.beans.BeanWrapperImpl.convertForProperty(BeanWrapperImpl.java:391)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.convertForProperty(AbstractAutowireCapableBeanFactory.java:1289)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1250)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
     at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
     at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
     at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
     at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
     at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
     at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveManagedList(BeanDefinitionValueResolver.java:287)
     at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:126)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1011)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
     at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
     at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
     at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
     at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:423)
     at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:729)
     at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext.access$1600(AbstractDelegatedExecutionApplicationContext.java:69)
     at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext$4.run(AbstractDelegatedExecutionApplicationContext.java:355)
     at org.springframework.osgi.util.internal.PrivilegedUtils.executeWithCustomTCCL(PrivilegedUtils.java:85)
     at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext.completeRefresh(AbstractDelegatedExecutionApplicationContext.java:320)
     at org.springframework.osgi.extender.internal.dependencies.startup.DependencyWaiterApplicationContextExecutor$CompleteRefreshTask.run(DependencyWaiterApplicationContextExecutor.java:139)
     at org.springframework.scheduling.commonj.DelegatingWork.run(DelegatingWork.java:62)
     at weblogic.work.commonj.CommonjWorkManagerImpl$WorkWithListener.run(CommonjWorkManagerImpl.java:204)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: java.lang.IllegalArgumentException: Cannot convert value of type [$Proxy386 implementing com.bea.wlevs.ede.api.Stage] to required type [com.bea.wlevs.ede.spi.EventManagerAccessor] for property 'source': no matching editors or conversion strategy found
     at org.springframework.beans.TypeConverterDelegate.convertIfNecessary(TypeConverterDelegate.java:231)
     at org.springframework.beans.TypeConverterDelegate.convertIfNecessary(TypeConverterDelegate.java:138)
     at org.springframework.beans.BeanWrapperImpl.convertForProperty(BeanWrapperImpl.java:386)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.convertForProperty(AbstractAutowireCapableBeanFactory.java:1289)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1250)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1011)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
     at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
     at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
     at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
     at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
     at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
     at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveManagedList(BeanDefinitionValueResolver.java:287)
     at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:126)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1011)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
     at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
     at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
     at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
     at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:423)
     at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:729)
     at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext.access$1600(AbstractDelegatedExecutionApplicationContext.java:69)
     at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext$4.run(AbstractDelegatedExecutionApplicationContext.java:355)
     at org.springframework.osgi.util.internal.PrivilegedUtils.executeWithCustomTCCL(PrivilegedUtils.java:85)
     at org.springframework.osgi.context.support.AbstractDelegatedExecutionApplicationContext.completeRefresh(AbstractDelegatedExecutionApplicationContext.java:320)
     at org.springframework.osgi.extender.internal.dependencies.startup.DependencyWaiterApplicationContextExecutor$CompleteRefreshTask.run(DependencyWaiterApplicationContextExecutor.java:139)
     at org.springframework.scheduling.commonj.DelegatingWork.run(DelegatingWork.java:62)
     at weblogic.work.commonj.CommonjWorkManagerImpl$WorkWithListener.run(CommonjWorkManagerImpl.java:204)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
Is my approach wrong? I tried using loadgen for loading the file but there is error in that as well.
PerfStats
Name = com.bea.wlevs.adapter.packet.impl.marketsim.CSVFileDataStream
CurrentTime = 2012-03-12 04:11:30.526
CurrentTimeMillis = 1331525490526
DeltaTime = 2998.146831 ms
Count = 3
Count/Sec = 1.0006181048175622
PerfStats
Name = com.bea.wlevs.adapter.packet.impl.marketsim.CSVFileDataStream
CurrentTime = 2012-03-12 04:11:33.544
CurrentTimeMillis = 1331525493544
DeltaTime = 3016.857869 ms
Count = 3
Count/Sec = 0.9944121103041597
PerfStats
Name = com.bea.wlevs.adapter.packet.impl.marketsim.CSVFileDataStream
CurrentTime = 2012-03-12 04:11:36.528
CurrentTimeMillis = 1331525496528
DeltaTime = 2984.582608 ms
Count = 3
Count/Sec = 1.0051656777596556
PerfStats
Name = com.bea.wlevs.adapter.packet.impl.marketsim.CSVFileDataStream
CurrentTime = 2012-03-12 04:11:39.527
CurrentTimeMillis = 1331525499527
DeltaTime = 3000.06586 ms
Count = 3
Count/Sec = 0.9999780471486049
java.net.SocketException: socket write error: Connection aborted by peer
at jrockit.net.SocketNativeIO.writeBytesPinned(Native Method)
at jrockit.net.SocketNativeIO.socketWrite(SocketNativeIO.java:46)
at java.net.SocketOutputStream.socketWrite0(SocketOutputStream.java)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at com.bea.wlevs.adapter.packet.impl.PacketSender.run(PacketSender.java:
139)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:44
1)
at java.util.concurrent.FutureTask$Sync.innerRunAndReset(FutureTask.java
:317)
at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:150)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.
access$101(ScheduledThreadPoolExecutor.java:98)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.
runPeriodic(ScheduledThreadPoolExecutor.java:180)
at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.
run(ScheduledThreadPoolExecutor.java:204)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
utor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
.java:908)
at java.lang.Thread.run(Thread.java:662)
PerfStats
Name = com.bea.wlevs.adapter.packet.impl.marketsim.CSVFileDataStream
CurrentTime = 2012-03-12 04:11:40.642
CurrentTimeMillis = 1331525500642
DeltaTime = 1113.656833 ms
Count = 2
Count/Sec = 1.7958853578012393
Please point me to some documentation or approach to resolve the problems.
Thanks in advance

The best choice depends on several things:
your network size and complexity, esp multi-vendor management needs,
whether or not you want servers and applications as well to be be monitored,
your ability to customize and configure free (open source) vs. wanting a vendor-supported product with easy out-of-the-box setup,
etc.
SolarWinds certainly offers a strong product suite (NPM plus NTA for the functions you mentioned) although large setups can get pricey (I have seen some US$ 6 figures). For many small to medium enterprises it is a good solution and it offers nice integration pay as you grow.
On the open source side you can put together a solution based on several tools. For instance, Nagios + Cacti + ntop + RANCID all combined give you a lot of useful information. Cost of ownership may or may not be higher as you do all the integration work yourself.
Some people speak highly of What's Up Gold although it's a more basic product. Also, ManageEngine's tools are well-regarded.
Of course an all-Cisco shop is best served by Cisco's offerings.

Unable to disable Network Monitor in Flash Builder 4 Standard

For some reason the Network Monitor is enabled for my Flash Builder project. Perhaps it was enabled when I was running the FB4 Beta 2 version. Now I need to disable the Network Monitor, but of course, since I'm using FB4 Standard the Network Monitor view says I need to purchase FB4 Premium.
All my app traffic is redirecting to localhost:37813 so I know the network monitor is still enabled. Can anyone tell me how to disable Network Monitor in FB4 Standard?
Thanks,
David

Thierry,
I finally figured it out. In Flash Builder close your project. Then in the file system go and directly edit the .actionScriptProperties file. In the main <actionScriptProperties tag edit the includeNetmonSwc="true" flag to be includeNetmonSwc="false" instead. That will stop including the network monitor library in your code and should turn monitoring off.
That setting is controlled by the network monitor tab, but that tab is only visible with the premium version of Flash Builder so it seems once your trial version times out you can never disable it via the GUI, just via the .actionScriptProperties file.
Now reopen your project after saving the changes to .actionScriptProperties and you should be good to go.
David

HP Storage Management Pack Conflicts with Network Monitoring SNMP

The HP Storage management pack that I installed requires starting the Windows SNMP services, which creates a conflict with SNMP used for SCOM network monitoring. I am spinning up a second SCOM mangement server so I can split these functions. What would
you recommend to split these functions across the two management servers? Uninstall the HP Storage Management Pack, and install on the new server? Or move the network monitoring to the second server?
Thank you for your help!

Does the HP Storage pack support resource pools? What I've found with these 3rd party packs that implement connector services is they do not provide true HA via SCOM resource pools - they are standalone systems with a connector service. This is true for
the NetApp (DataONTAP) pack, and it's a huge disappointment.
Vendors do this because they have an API, and they think the only way to implement discovery and monitoring in SCOM is to create a service that accesses the API - and then the service is basically a collector in this case, and typically has a handful of
rules (sometimes just one rule) that scrape events on the management server and they are misinterpreted to be alerts coming from some instance.
I turn green when I run into this type of problem, because all this can be accomplished with native modules or managed code that are designed to work very well with SCOM.
I know this doesn't answer your question - it's more a way for me to express my distain for these type of packs.
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

Where is the Linksys Wireless Network Monitor icon?

I was trying to follow some instructions and it said to click on the Linksys Wireless Network Monitor icon on the bottom right of my screen. There are a bunch of icons but none of them are this one or any other Linksys icon. I also searched the harddrive and couldn't find anything. Help!!!

Try uninstalling it and reinstall it back again.
If you're using windows XP, plug in the adapter first and just install the drivers. No need to install the WLAN monitor.

WTK 2.5.1 Network Monitor a bit short

I'm trying to run a continuous test on an application that communicates a lot of data over the mobile network, and I found that the network monitor log only handles around 900 entries until AWT crashes. Based on the error there seems to be a fixed-size array.
Of course I turned the network monitor off for the remainder of the test, but then I can't see if there are problems in the communication.
A limitation in AWT?

What protocol are looking at? I tried HTTP (WTK 2.5.1) and it looks like it can handle a lot of messages......

Network monitor not working at all

Hey
Does anyone have any idea why suddenly monitoring data/services thru network monitor is not working at all?
I have tried to monitor services thru Chrome,FF and IE. Works only on IE but in Chrome and FF the services seem to wait for an answer that they will never get. But once i turn the network monitor off, all work fine in all browsers.
I did disable firewall and virusprotection while permforming these test but they did not had any affect on the matter.
Any help ?
Cheers
Lauri

Hi redstorm,
Let's get your Network Extender to an optimal working condition! Please ensure that your access settings are configured correctly, and make sure to add your phone as a contact. Keep us posted. http://vz.to/1cU4Gwx
AntonioC_VZW
Follow us on Twitter at www.twitter.com/VZWSupport

WRE54G Network Monitor

Similar Messages

Maybe you are looking for