Wre54g v1 can not detect the wireless card

when I start the setup it shows me this error and I cannot continue the setup...I have win 7....I have tried to configure it manually but I have failed...how can I do to solve this error?

You can follow this link and it will help you configuring your expander manually, without the setup disk.

Similar Messages

Dv9810us after recovery windows will not detect the wireless card that is bulit into the computer.

After running the recovery (Vista 32) from the recovery partition my computer no longer sees the Wifi card installed.
There is nothing in device manager, the hp wireless wizard doesn't detect anything. I went to HP's site and download the 3 different wifi drivers that it would be and installed them. I can not rememeber what the adapter was.,. thats a problem.
This system was a refurbed unit when I bought it, if the salesman was correct it was recalled because of a faulty Wireless card. I wonder if they replaced the card with one that the restore partition installation could not detect.
Any ideas?

first make sure the wifi is turned on either by a switch located on the front of keyboard or a soft touch icon near the display.. if you have the soft touch make sure it's blue in color if its orange its turned off

N9 Can Not Detect the Sim Card

Hi Guys,
I have N9 which was dead due to some reasons, I just gave to Nokia Care and they have reinstalled the software and returned to me.
I insereted my microsim and it didn't detected, they Nokia people used their sim card and that worked. I just bought another new sim card and put it in, it worked let's say 2 hours but now again showing the icon of "No Sim Card". I tried restarting, removing sim and inserting again etc...but till now no Luck.
I am extremely angry as I paid a huge some for this device and it didn't work for me. I just bought it 2 weeks back.
Any Idea what could be the problem, I am going to sue the mfs if they are not going to give me a new device or money back.
Thanks.

If it stops recognizing the sim card after a while it could be due to wear and tear, but since it's new and you have tried a new sim card I would say it's obvious that there is a hardware fault with the device. Could be the contacts reading the sim card.
Get it replaced or take it back for repair. They should be helpful fixing this.
Hope you get it sorted and you become a happy camper as I am - so far

DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h Unknown
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 0000A800h
System IRQ 5, INT# A
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
Vendor 02h Creative Labs
Device 0002h EMU0K Audio Chipset (SB Li've!)
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 04h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 002002h CT4850 SBLi've! Value
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00009000h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 7002h PCI Gameport Joystick
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 0h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Input, type Other
Subsystem ID 002002h PCI Gameport Joystick
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008800h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008400h
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
(Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
Cheers,
Russ.

Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

Vista can not detect my graphic card ATI HD2600 on Satellite A210-128

Hallo,
Can someone help me with this issue?
I have a Toshiba Satellite A210-128 laptop with vista separately on DVD, but it seems that the dvd is damaged and I can not use it any more.
I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
What to do????
It is something special with the DVD that i have from Toshiba ?????
Thank you very much.

Hi
> I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
The whole issue is really mysterious. In my opinion there are two options;
Either your have used and tried to install a wrong graphic driver or there is something wrong with your GPU chip.
Are you 100% that you tired an right graphic driver from the Toshiba European driver page?
If yes, then I recommend contacting the ASP in your country because this could be really an hardware issue.
Furthermore I found you second posting in other thread
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=142621#142621
and I think more and more that this must be an graphic card issue.

Can not access the media card files Blackberry 8310 - HELP

Can not access the media card files Blackberry 8310.
I had a battery drain problem. The unit would only last 16 hours before completely drained. Purchased a new battery with the same result. I figured that I should try a complete reset so I did a hard wipe. Once that was done and I loaded the unit back up and returned online, the battery drain problem was resolved but now I can not access the media card.
Here are the messages:
“A media card has been inserted that contains encrypted content which will be unaccessible by this device”
I can see the files. I have transferred them to my PC via the SD card but I can not open them. Here are the settings:
Media card support – ON
Encryption Mode: - Security Password & Device
Encrypt Media Files – YES
Mass Storage Mode Support – OFF
Please note – I can not change the encryption mode since it is set by policy
Security Options – General Settings – Content Protection – Disabled
The version of Desktop Manage I am using is 4.2.1.8. When I try to use the Media Manager to move the files, I get an error message and can’t move the file. If I access the file on the card and try to display it, I get:
Unable to display file /media card/ pictures/ing000000xx.jpg.rem
Here is what I have tried (from the advice on this board):
1)     Read the files directly off the media card – No good
2)     Create a “new” folder on the media card and move a file into it then try to read it – No good
3)     Email the file then read it – No good
4)     Reset Encryption mode to off then try – Can’t do it – IT Policy setting
5)     Be sure that the password was set the same as before the wipe (setting is password & device) – Can’t do it – The Blackberry prevents me from using an old password.
So I think I can’t read the files because I can’t replicate the encryption key. Could that be right? My problem is that I do not understand why this would be the case. It is still the same device and since it knows what the old password was (because it would prevent me from using it again), why would it not generate a key to access the files?
All I am trying to get off the card are pictures on my 6 year old … some are priceless. Can someone help me do this? One would think that this should not be this hard but from all the postings I have found, it seems that it is. And yes, shame on me for not moving the files before I did the reset (THAT will never happen again!) but this being unrecoverable is unconscionable given how many seem to find themselves in this situation.
Thanks for any help you can offer!

Not sure why you couldn't see them using mass storage mode. Did you have the pics stored on your media card? Try going to media-menu-explore-media card-blackberry-pictures See what the extension is on your pics. If any have the extension such as .jpg.rem they are encrypted.
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

WRT54GS Can not detect the router

We lost the internet connection a few days ago for a couple of hours and since then had to reset the modem and when I try to set up the router with the Easy Link Advisor I get can not detect the router. I am using the router to access the internet and it can't be detected???
I have powered it off enough times and then some and need to get this running to use the laptops.
I am running ver 7 firmware that it came with but I don't know what the exact version I am running or gor that matter where to find it.
Thanks

okay went through the firmware upgrade and installed it through 192.168.1.1 to admin tab and upgrade. it got to the reboot part and hung there for a bit, i hit continue or what ever it said and came back upwith a dns error and page unreachable. version installed is what i downloaded 7.50.5. i am still having the same problem, all the lights are lit that are suppossed to be lit, and i am on the internet and running through the router, and when i go into easylink advisor and start the setup process i have to go through the entire thing including selecting the router (which it should know what router it is) though removing the power cord and waiting and still told that it can not detect the router. i have no idea where to go from here. thanks!

Hello I would like to ask I have a problem with the Iphone 3gs 32 g I don install the ios 6.0 and now I can not activate the sim card .... I do not even know what's centenary advise me thank you

Hello
I would like to ask I have a problem with the Iphone 3gs 32 g
I don install the ios 6.0 and now I can not activate the sim card .... I do not even know what's centenary advise me thank you

Did you already try the suggestions from this article?
Symptoms
In certain situations, iPhone may present one of the following symptoms:
"Invalid SIM" or "No SIM Card installed" alert appears intermittently.
Status bar displays "No Service", "No SIM" or "Searching" in a location with good network coverage.
Resolution
If you encounter any of the above symptoms on your iPhone, try these steps to attempt to resolve the issue:
Update your iPhone to the latest version of iOS.
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
copied from iPhone: Troubleshooting No Service or No SIM

HELLO, I UNLOCKED MY 3GS PHONE THEN RESTORED IT TO FACTORY DEFAULTS THROUGH ITUNES THEN COULD NOT REACTIVATE THE IPHONE, I TRIED SEVERAL TIMES USING WIFI AND ITUNES, IT CAN NOT DETECT THE SIM, SOMEONE PLEASE HELP ME WITH FOLLOW UP, THANKS

HELLO, I UNLOCKED MY 3GS PHONE THEN RESTORED IT TO FACTORY DEFAULTS THROUGH ITUNES THEN COULD NOT REACTIVATE THE IPHONE, I TRIED SEVERAL TIMES USING WIFI AND ITUNES, IT CAN NOT DETECT THE SIM, SOMEONE PLEASE HELP ME WITH FOLLOW UP, THANKS

sir as ur reply i guess that my phone has locked again as i restored to factory defaults, now if i try with a att active sim then can i activate the iphone ? and i think i need to unlock again if i want to use sim other then att right ? pls reply me in details asap

Windows 7 will not detect the wireless adapter on my Dell D610 laptop

Windows 7 will not detect the wireless adapter on my Dell D610 laptop
Any workaround?

hey guys.... i believe i have some light for you all. I gave my daughter a D610 which came pre-installed with Linux (ubuntu). She did not like it so i loaded windows 7 and guess what? no wifi.
Unknown Device listed on device manager. to make the story short, after almost returning the laptop and spending 2 days looking for drivers everywhere I decided to reload Ubuntu because the wifi always worked. Then going a little deeper inside linux hardware
specs I listed all the hardware using the command lshw from linux shell and what shows up as wifi interface? Atheros AR5001x.
Problem was almost solved. The adventure now was find the driver for Atheros AR5001x that worked for windows 7. And now just to finish this story even faster, the diver is xp32-5.1.1.9.
Unfortunately after downloading the driver I did not save the website. I have the file with me if you need.
Just send me a message and i will be more than happy to email it to you.
Happy New Year for all!!!!

Credit card number change, your company can not charge , so , what can I do ?because I buy one year plan , but the plan stop already ,I can not change the credit card details.So, I need to buy one more year or can continous the paln with changing the cre

credit card number change, your company can not charge , so , what can I do ?because I buy one year plan ,
but the plan stop already ,I can not change the credit card details.
So, I need to buy one more year or can continous the paln with changing the credit number?

Hello pen pang,
if your Photoshop is a part of Creative Cloud you can use "Manage your membership and payments|Creative Cloud" at
http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html >>>
Payment & credit card >>> Help changing the credit card on your account >>> from there see what hints are listed.
On the other hand I'm sure that you can use the recommended procedure with a "normal" PS too.
If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use the chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.
If you need these explanations in another language, please use "Change" at the end/bottom of the website from above
Good luck!
Hans-Günter

TS1589 when I open airport utility it performs a scan and then say it can not detect a wireless device. The rest of the screen is blank; all menus are blanked out. What do I do?

I just replaced our wireless modem with a new one; our airport extreme is now flashing amber light. When I get into airport utility it attempts to scan for the device but can not detect it. The utility screen is blank - nothing to select or configure. The menus are also blank. What do I need to do?

I just replaced our wireless modem with a new one; our airport extreme is now flashing amber light. When I get into airport utility it attempts to scan for the device but can not detect it. The utility screen is blank - nothing to select or configure. The menus are also blank. What do I need to do?

The operating system can not detect my wireless device!

Hi all,
I am using windows server 2008 for the operating system and lenovo 3000 G430 for the laptop. but the operating system can not detect wireless device, on devices manager always show the drivers for this device are not installed! i tired for find and search the right driver. anyone have same problem with me and have solving this problem? or at least has same equation the operating system and the laptop series.

The problem is you have 2008 server on your laptop. The only thing you really can do is try all the wireless drivers here http://consumersupport.lenovo.com/ot/en/driversdownloads/drivers_list.aspx?categoryid=486030
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

I have an iphone 3GS. i updated it to the latest software but it can not read the sim card plse help me

i have an iphone 3gs that i updated thia evening to the latest software but the problem it could not read the sim card plse any help

Your iPhone was hacked to unlock it. Now that you have updated it has cleared that hack and is locked with the original cell provider. Call AppleCare and give them the model and serial number and they can tell you the cell provider it is locked with. Then contact that cell provider and see what their unlock policy is and if you qualify.

Can not installed the Sound card driver for Windows XP SP3?(CQ40 333TU)

my notebook model is CQ40 333TU, i downgraded from windows vista to windows xp sp3, but i can not installed the sound driver? and i can not found the xp driver in hp web, help me.

This might help>>>
http://h30434.www3.hp.com/psg/board/message?board.id=OS&thread.id=26
http://h30434.www3.hp.com/psg/board/message?board.id=OS&thread.id=230
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Wre54g v1 can not detect the wireless card

Similar Messages

Maybe you are looking for