WRE54G -v2 --- Changing password

Hi,
Other than a few issues the setup is working fine, however when I change the default admin password I can no longer log into the RE from my browser. I change the password then click on Save settings I am prompted immediately for the passord. I type it in and it just kicks back the login prompt. Yes I am typing the new password correctly. I have reset the RE three times and it does it everytime.
Any thoughts?

what firmware are you currently running on the WRE ? suggest you upgrade the same

Similar Messages

If someone has wiped my ipad and changed passwords on icloud how do i get my data back

if someone has wiped my ipad and changed passwords on icloud how do i get my data back? please could someone help me out thanks

How did they wipe it? By using Find My iPad and performing a wipe? If so, that means they have your icloud ID and password, not a good thing.
You could try connecting it to iTunes and performing a restore from iCloud. But if they changed password, then you are out of the loop. How did they get your password in order to change it?

How to Enforce User Change Password First Time User in Release 2?

Hi...
We discovered in Oracle Directory Manager(in unix is oidadmin), there actualy
column to expiry date.(the default is 60).
We follow this notes in metalink..
Note:176470.1 Subject: How To Pre-Expire Portal Passwords
Even though the note is for Portal30(release1), we just wangt to try it in our Release 2...
Extract from the note
"3. Set the value of the column LAST_PASSWD_CHANGE_TIME in the table WWSEC_PERSON$ in SSO schema to a value older than the password expiration period (default is 90 days) before the current time (e.g. sysdate - 100) for the appropriate user(s)
4. For example, if you have created a user called TEST
you would issue a command such as:
update wwsec_person$
set LAST_PASSWD_CHANGE_TIME =sysdate-70
where USER_NAME='TEST';
commit; "
But, when we try to login again in the portal, we can still login...
So, is the function still exist in Release 2?..
If not, why Oracle Portal throw that function away?
Why there still columns in WWSEC_PERSON$ that maybe linked to the password problem?
can anybody help/explain?
Thanks....

Rather than rehash what has already been thoroughly discussed, check this thread. This should answer your question.
Can a user change his own password after admin has set it
The english version of Jose Troya's blog: http://obiee101.blogspot.com/2008/08/obiee-change-password.html
Edited by: LC143 on Aug 27, 2008 1:36 PM

In Portal Anonymous mode - Change password option not coming- login fails

Hi Experts,
We are having some application which requires login in anonymous mode. When we click the application and give the user id password, it loggs in properly, there is no problem in that.
But if the password is reset by administrator, then when entering the reset password given by admin it should ask to change the password. This is happening in normal scenario(/irj/portal), but when try the same in anonymous mode(irj/portal/anonymous) where the prompt is from the login required application, then it says login failed instead of giving the change password and confirm password screen.
Appreciate your help in solving this issue. I hope many would have faced similar situation.
Thanks
Yusuf

Hi Yusuf.
Do you use a standard or custom login module for your application?
More likely the used login module does not have a logic that handles such scenario as a change of user's password.
In this case you need to implement a custom module with a required functionality.
Best regards,
Aliaksandr Zhukau

User cannot change password option is automatically getting unchecked while giving domain admin rights

user cannot change password option is automatically getting unchecked while giving domain admin rights

Greetings!
"Domain Admins" falls into the category of protected groups and it is included in ADminSDHolder process. It is normal and was designed in order to prevent the modification to these privileged groups. More information on the link below:
AdminSDHolder, Protected Groups and SDPROP
Regards.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

Unable to change password while first logon on windows server 2008 R2 SP1 system

Hi Team,
Ad team has created new account for me with change password on first logon setting
When I logged in on Windows Server 2008 r2 SP1 system with my new credentials I get a error message stating that
"You must change your password before logging on the first time. For assistance, conatct your system administrator or technical support"
Concern:
I do not get password change screen on first logon on the server. How should I change my password on first logon?

Hi,
I got resolution for above issue
Run ==> type "tsconfig.msc" ==> double click "RDP-TCP" ==> change security layer to
RDP Security layer ==> Apply ==> OK

HT1933 I have old email address's I used for iTune music purchases and cannot change password on several old accounts. Now some of the music I purchased I can not download and authorize it on my device. What can I do password security does not match my bi

I have old email address's I used for iTune music purchases and cannot change password on several old accounts. Now some of the music I purchased I can not download and authorize it on my device. What can I do password security does not match my birthdate on two of the accounts. Apple can not send me email with a password authorization on several current accounts that I have with them. How can I contact Apple with this annoying problem I can not fix.

settings - app/iTunes store - sign out and sign back in with your new id.
Note - if your older apps needs an update it will use your old apple id and password, as Apps are tied to the apple id that was used to purchase it.
You can't merge apple id.

How to trigger and change password for AD user after form based login

Hello,
We are authenticating against Active Directory with Weblogic 10.3 using FORM based security. Everything is working. I need to now change a password for an authenticated user. For example, I have set a user to have their password expire on next logon from the AD side. The user logs in but somehow I need to trap some info from Active Directory (or an LDAP conversation) to figure out if I need to force the user to change password.
Do I need to start looking at custom code with LDAP Java SDK's or can I use a canned MBean from Weblogic Server.
I am looking at http://www.mozilla.org/directory/ for LDAP.
Can I set/reset an AD user's password with an MBean like the following link?
http://download.oracle.com/docs/cd/E13222_01/wls/docs92/javadocs/index.html?weblogic/management/security/authentication/UserPasswordEditorMBean.html
If anyone has any experience with this or can point me in the right direction let me know.
If anyone else is interested please add to the tread and I'll be sure to keep the found solution(s) updated here.
Thanks...........
JJ Everett

Hello JJ
Please see document ID 403484.1 in http://metalink.oracle.com. This may help to understand what you are aiming to do. Cheers
-- Nathan

How to allow users to change password

I have enabled users to change their passwords in the Server.app for the Default Site with SSL, and who can access is a group of individuals.
When I load up the Server site, I am presented with
a Login to which I then add my username and password and I am then presented with
Welcome to OS X Server
OS X Server makes it easier than ever for the people in your organization to collaborate, communicate, and share information.
I Choose My Settings and the site is redirected to /changepassword of which a page comes
Forbidden
You don't have permission to access /auth/ on this server.
The Directory /Library/Server/Web/Data/Sites/Default/auth/ exists with the corret permissions. This is an empty directoy tho
Apache Logs:
Directory index forbidden by Options directive: /Library/Server/Web/Data/Sites/Default/auth/
I cannot get this to work. WIki's are turned on but that doesnt work either.
If I Launch /wiki, I am prompted to login, to with I do, and i just get a blank web page
Apache logs:
File does not exist: /Library/Server/Web/Data/Sites/Default/__collabd
This is on a new install of OSX server
Any Suggestions?

Hi,
On the landing page at the bottom it should say "change password".
That brings you to a forbidden page?
On my server I do not have the /auth/ folder in my default site, but my changepassword page does work.
Can you check if going to https://127.0.0.1/changepassword does work? It will give an SSL error.
Then it might be DNS related conflicting with another router/server in your network
Or... charge $ 5 per user to change his or her password personally
Goodluck!
Jeffrey
StarPine Support

My itunes account was disabled for some reason. I changed password in iforgot and still didn't work. I could log in but not make purchases from the store so I set up a new login/account . Is there any way to move my music to the new account?

My itunes account was disabled for some reason. I changed password in iforgot and still didn't work. I could log in and see my music but not make purchases from the store or even redeem an itunes gift card so I set up a new login/account with another email account of mine. On the new account I can redeem my gift card and download items onto my ipad2. Is there any way to move my music to the new account?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Dear support @Apple, I have tried to log in App Store with my Apple ID 3 times but never possible. I have tried to change password 2 times. It was successful.But soon after change of my password, I could not log in App store. It says always incorrect u

Dear support @Apple,
I have tried to log in App Store with my Apple ID 3 times but never possible.
I have tried to change password 2 times.
It was successful.But soon after change of my password, I could not log in App store.
It says always incorrect user name or password. But I input correct ! Because just I successfully changed my password through secret question.
Third time when I tried to change password, the page did not open!
So I checked my connection by netstat , and I trace the IP address ; 17.154.66.17 this is apple IP, but when I trace , it did not show the route. I will copy
Traceroute has started…
traceroute to 17.154.66.17 (17.154.66.17), 64 hops max, 72 byte packets
1 220.224.141.129 (220.224.141.129) 490.517 ms 64.527 ms 94.524 ms
2 115.255.239.97 (115.255.239.97) 65.157 ms 89.128 ms 89.806 ms
3 124.124.251.241 (124.124.251.241) 104.972 ms 79.051 ms 96.948 ms
4 * * *
5 62.216.147.137 (62.216.147.137) 102.266 ms 85.581 ms 88.352 ms
6 xe-0-0-0.0.pjr04.ldn001.flagtel.com (85.95.25.186) 221.939 ms 225.223 ms 236.605 ms
7 xe-11-0-0.edge5.london1.level3.net (212.187.138.53) 231.629 ms 232.045 ms 233.673 ms
8 ae-52-52.csw2.london1.level3.net (4.69.139.120) 373.798 ms 390.412 ms 383.277 ms
9 ae-57-222.ebr2.london1.level3.net (4.69.153.133) 382.653 ms 382.558 ms 376.740 ms
10 ae-43-43.ebr1.newyork1.level3.net (4.69.137.74) 405.088 ms 377.679 ms 386.527 ms
11 ae-91-91.csw4.newyork1.level3.net (4.69.134.78) 378.499 ms 389.733 ms 396.375 ms
12 ae-92-92.ebr2.newyork1.level3.net (4.69.148.45) 391.706 ms 389.605 ms
ae-82-82.ebr2.newyork1.level3.net (4.69.148.41) 381.615 ms
13 4.69.135.185 (4.69.135.185) 380.183 ms 414.398 ms 387.054 ms
14 ae-91-91.csw4.sanjose1.level3.net (4.69.153.14) 384.980 ms 381.375 ms 386.453 ms
15 ae-4-90.edge2.sanjose3.level3.net (4.69.152.209) 377.304 ms 365.457 ms 373.281 ms
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * * *
22 * * *
23 * * *
24 * * *
25 * * *
26 * * *
27 * * *
28 * * *
29 * * *
30 * * *
31 * * *
32 * * *
33 * * *
34 * * *
35 * * *
36 * * *
37 * * *
38 * * *
39 * * *
40 * * *
41 * * *
42 * * *
43 * * *
44 * * *
45 * * *
46 * * *
47 * * *
48 * * *
49 * * *
50 * * *
51 * * *
52 * * *
53 * * *
54 * * *
55 * * *
56 * * *
57 * * *
58 * * *
59 * * *
60 * * *
61 * * *
62 * * *
63 * * *
64 * * *
What it means??
Please help !!
To post this question, I tried thierd time to change password, and before I tried to log in to App store, I logged in this community, and I could !
Then I could finally log in App store also.
But still I feel something is wrong with my connection.
Why the trace route does not show to the apple site ?

This is a user to user forum. Apple is not here. Apple does not answer questions here.
iTunes Support -
http://www.apple.com/support/itunes/
Mac App Store Support -
http://www.apple.com/support/mac/app-store/

ITunes is updated and works fine and I am able to log onto my account. When I go to purchase a song, I get the error message "Your Apple ID has been disabled". I've tried different methods: changing passwords, making a new account with another email addre

iTunes is updated and works fine and I am able to log onto my account. When I go to purchase a song, I get the error message "Your Apple ID has been disabled". I've tried different methods: changing passwords, making a new account with another email address, and emailing itunes tech support. I am curious as to how many others have been experiencing the same issue. When I googled the error, it seemed like it was happening extremely often with many people.
We all love their products, but they always come with a lot of issues and horrible customer support.
My apple Id is [email protected]

My Iphone 4 is telling me the same thing and I believe I figured out what the problem is. I had some fraudulent charges on my itunes account, so I call my bank and disputed the charges. Right after I did that, I started getting the message "Your apple ID has been disabled." I just realized today that the charges are not fraudulent, they are "in app purchases." One of my daughters downloaded the game Top Girl which is FREE, but in the game Top Girl you use money in the game to purchase things. It just so happens that the money you use to purchase things is real money MY Money!!!. My daughter thought she was using play money in the game and had no idea she was using real money. She spent $106.00 buying stuff. Now I have to call the bank and tell them to release the hold and pay Itunes. I'm hoping this solves the problem. Here is the link to learn how to disable "in app purchase" on your iphone or ipad.
http://www.ikidapps.com/2010/12/parents-avoid-accidental-app-purchases-how-to-tu rn-off-in-app-purchasing.html

Change Password in OBIEE 11.1.1.6.2

Hi All,
We are giving facility to the end users to change the respective password by logging into BI Publisher 11.1.1.6.2 where the Password Change Mechanism has been provided.So when the user change the password in Publisher then the same change will be reflected in OBIEE also.
Now we have defined some rules for setting the password on Web-logic Console.SO when you try to change the password that rules should be applied while changing the password.
Issue is that when you try to change the password in BI Publisher the rules are not getting applied.
any help in this regard.

Hi,
I suggesting you better to go with LDAP athunthication. password changes everthing will be taking care by u r domain ctlr. no more option user to change password in obiee11g. the workaround i too tried it but its required couldn't completed its required webservices and j2ee/.net apexternal application code need to check it u r application code development team.drop me your email i can send my code.after getting this code u need to convert webservices and need to get discriptor jar/war file then need to deployit wia weblogic console.after theat JMX java bean need to run it
In obiee11g users/roles are taking care by FMW.
for the LDAP confuguration steps
http://obieedue.blogspot.com/2012/01/obiee11g-integration-with-ldap-and.html
Thanks
Deva

While trying to change password getting ora-00600 [4842] - Plz help

while trying to change password getting ora-00600 [4842] - Plz help
database : 9.2.0.4
o/s : Linux

Hi,
when getting an ORA-600 you always should contact Oracle support please ;-)
To diagnose an ORA-600 the stack trace will be necessary - see the trace file mentioned in the alert.log when the ORA-600 did happen.
But FIRST OF ALL you should definitely apply patch set 9.2.0.8 and see if this error happens again (metalink.oracle.com ==> PATCHES ==> Quick Links ==> <your platform>). Support will ask you to do the same before they start diagnosing anything in this case.
And please keep in mind that 9.2.0 has reached end of Premier Support more than 1 year ago.
Kind regards
Mike

I am getting a Changing Password Failed error when I try to join an active directory

I had a working AD configuration under Snow Leopard. When I upgraded to Mountain Lion, my account was no longer in sync with the domain. I got the red dot on the login screen and my domain password was out of sync. I unhooked from the domain at that point. This was several months ago.
However, over the last few weeks, I keep finding myself locked out of the domain. I suspect it's something on my Mac that is trying to use my old credentials. I was hoping to rejoin the domain and see if I could get my account back in sync. When I get a domain admin to enter his password on the Directory Utility join screen, it first notes that the computer account already exists in the domain. I tell it to continue, but I can't get past this point:
2013-06-24 14:21:20.729935 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - Computer account either already exists or DC is already Read/Write
2013-06-24 14:21:20.732774 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - existing record found 'CN=MYMACHINE,OU=Default,OU=Workstations,OU=MyCity,OU=North America,DC=GLOBAL,DC=OURCORP,DC=NET'
2013-06-24 14:21:20.732822 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - switching to cache 'MEMORY:0x7faef36ed770'
2013-06-24 14:21:20.733141 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm GLOBAL.OURCORP.NET flags 2
2013-06-24 14:21:20.734196 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to 12
2013-06-24 14:21:20.734221 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: tcp 10.22.94.212:kerberos (1.2.3.4)
2013-06-24 14:21:20.741380 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: tcp 10.22.94.212:kerberos (1.2.3.4)
2013-06-24 14:21:20.741416 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context done: 0
2013-06-24 14:21:20.741619 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - trying to set password
2013-06-24 14:21:20.741637 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - trying to set password using: MS set password in realm GLOBAL.OURCORP.NET
2013-06-24 14:21:20.741648 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - using TCP since the ticket is large: 1560
2013-06-24 14:21:20.741665 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service change_password for realm GLOBAL.OURCORP.NET flags 2
2013-06-24 14:21:20.742867 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to 12
2013-06-24 14:21:20.742908 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: tcp 10.22.94.212:kpasswd (1.2.3.4)
2013-06-24 14:21:20.745231 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: tcp 10.22.94.212:kpasswd (1.2.3.4)
2013-06-24 14:21:20.745250 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context done: 0
2013-06-24 14:21:20.745398 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - set password using MS set password returned: 0 result_code 3
2013-06-24 14:21:20.745417 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Changing password failed for '[email protected]' with error '' (3)
2013-06-24 14:21:20.745426 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - setting Computer Password FAILED for existing record - 5103
2013-06-24 14:21:20.745818 EDT - 4934.65016, Node: /Active Directory, Module: ActiveDirectory - ODNodeCustomCall failed with error 'Credential operation failed' (5103)

Reggierror,
Had the same issue and discovered that I made my AD object name too long (16 instead of 15 character which is the limit) You might want to try making the computer object name shorter if you can.

WRE54G -v2 --- Changing password

Similar Messages

Maybe you are looking for