WRE54G V3.0 Install Issue

Am unable to successfully set up WRE54G V3 to WRT54GS.  My network is WEP enabled. Followed instructions in box about cabling to access point and site survey fails.  Ran setup from wireless box and message is unable to find an extender at end of setup.  I was able at one point to get to WRE54G web setup but have since not been able to get to setup.  I have reset the box numerous times. Any help would be appreciated. 

The instructions in the box didn't work for me either. Here's how I got it working finally:
1. Use the Ethernet cable to connect the WRE directly to an Ethernet port on your router.
2. Using a PC attached to your router (wired or wireless), start up your browser and go to 192.168.1.240
3. Enter the password "admin"
4. The WRE setup screen should come up
5. Enter the correct SSID for your Router. Save settings, the WRE may reboot, if so, go back into the WRE setup. Go into the "Edit Security Settings" tab. Enter your WEP info directly. If you have a Linksys router and used a passphrase to generate your Keys, you can enter the same passphrase in the WRE, but the case ***must*** be the same as you used in the router. Check to make sure the generated hexadecimal Keys are the same in both the router and the WEP.
6. Confirm everything else matches your router settings (SSID, WEP settings)
7. Save your settings to the WRE again
8. The WRE will reboot, wait for the screen to reappear. Now exit your browser, wait a few minutes.
9. Restart your browser, go back to the WRE (192.168.1.240), enter the password, on the setup screen confirm everything is correct (SSID, etc), go back into the Security Settings and make sure the Key Hex digits match your routers. If everything matches, Bob's your Uncle!. In my case, I had to enter the data twice before everything "took", probably becase I did not save my SSID settings before going into the "Edit Security Settings" tab.
Good luck!

Similar Messages

  • SP2010 Foundation Post Install issues on development workstation - Database and Services

    Just recently installed SP2010 Foundation for a development workstation.  Platform isWin7 X64 pro, SQL 2008 (Developer edition)
    (1) Looks like search has some configuration issues.  This is in the Windows event log
    The Execute method of job definition Microsoft.SharePoint.Search.Administration.SPSearchJobDefinition (ID 38eefca2-d092-47f4-a833-23f8280c5f63) threw an exception. More information is included below.
    The device is not ready.  
    (2) In Central Admin > Servers in Farm
    Status - "Upgrade Available", 
    (3) In Central Admin > Manage Database Upgrade Status
    Sveral of the Datbase(s) mention that upgrade is recommended, but one in particular mentions that the DB is too old?
    WSS_Search_GHHTY
    SPSearchDatabase
    Database is too old and upgrade is required
    Huh?  
    (4) Looking at my local SQL 2008 instance that SP2010 created, I see several DB's with "Config" in the name along with a guid on the end of the name.  Is the result of re-running the configuration wizard several times while
    I was correcting install issues?

    here is question, i am assuming its fresh install not upgrade...
    when you run the config wizard( you mentioned many times), which option you select from 2nd try to on ward....cannot disconnect this server from farm?
    are you using any script to install ?
    I would say run the config wizard without disconnecting and this server will host CA option.
    from the central admin > manager server in farm...on top you will see farm version and config database name. note it
    from the Manage database Upgrade status page note all the db names
    now match it on sql and keep those and all other should gone now as a clean process.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Mac OSX: Flash CS3 Font Install Issues

    Hi,
    I have a Mac Powerbook G4 with OS X installed and Adobe CS3.
    I've installed a font. The font works in Photoshop and Illustrator
    but not in Flash CS3. Why? I've put the font in the Library/Fonts
    folder and the User/Fonts folder and it still doesn't show up in
    Flash. Apparently this is a problem for a number of people see
    another forum here:
    MAC
    OSX: Flash CS3 Font Install Issues Forum
    Please let me know what to do to fix this. I need to be able
    to work with the font in all three applications Flash, Photoshop
    and Illustrator.

    Hi davidd61713525,
    Sorry for not getting back to you sooner.
    Unfortunately, it looks like something is wrong with the file system and the installer can't see the root drive to install to.  A Google search returns numerous results affecting various products and the recurring theme is that something is wrong with the disk.  There are many recommendations from various sources, but nothing definitive.
    Here's a similar thread over on the Apple forums:
    Broken Installer Permissions | Apple Support Communities
    And a similar older one:
    http://forums.macrumors.com/showthread.php?t=1203509
    I would try the following options:
    Try using the PKG installer. This is used Mac SysAdmins to install Flash Player within their organization and uses a slightly different installer path, which may or may not work.
    Some people have had success with disk and permissions repair some have not.  You can try running a disk and permissions repair.  After the disk and permissions repair is complete, reboot the system and try to install again using either the online installer (get.adobe.com/flashplayer) or the offline installer, posted at the bottom of the Installation problems | Flash Player | Mac page in the ‘Still having problems’ section.
    If these options do not work, I'd reach out to Apple support to see if they have a suggestion.  If you do find a resolution to this, please let me know.  I'll be happy to share it with people that encounter the problem in the future.
    Maria

  • Re-Installing Issue

    Hi,
    I have a G5 I had to re install and erase my HD cause I had issues, now that i am rebuilding the system it won't let me install FCS, I get to the DVDP disc and it says Installation failed.... I tried it a few time and I get the same error. Can anyone shed some light on this please?
    thanks
    P

    Welcome to the forum!
    Made sure the disks are clean? I'd call Apple on an install issue if it's new or if you suspect a damaged disk and you're the registered user.
    Which OS are your running? QuickTime Version?
    Jerry

  • Webutil install issue

    Hello,
    I have a strange WebUtil install issue on 10gIAS 10.1.2.0.2. I downloaded the 1.0.6 WU version and put it into a webutil directory under forms (which the pre-configuration of AS seem to assume) and when I call the forms servlet with ?config=webutil the "RegisterWebUtil - Loading WebUtil Version 1.0.6" shows but the main applet doesn't load. The webutil HTML template is found and looks OK in View Source but no applet. The config section has a archive_jini but it behaves as if the main jar can't be found(?) Nothing extra in the jinit-console, even at log level 5. webutil.cfg is copied to forms/server and frmwebutil.jar to forms/java.
    Suggestions appreciated,
    Nik

    Hi,
    Can you check Vitual Path of WebUtil in the config file ..\forms\server\forms.conf?
    I would like to see your files
    ..\forms\server\default.env
    ..\forms\server\forms.conf
    BACH

  • I was trying to activate my CS3 and got help from chat until he said it was an installing issue. The application opens and then closes unexpectedly.

    I just got a new mac and I'm trying to download my Adobe CS3 onto it. I was able to download and then I tried to activate it. I entered the CS3 serial number and then asked for the serial number of the older version. I originally bought CS2 on disc and downloaded it onto my old mac and from there bought an upgrade to CS3. I no longer have the discs or box for CS2 and so I do not have the CS2 serial number. I contacted chat support who helped until I reached the point where I could open the application but then it would quit immediately and say "Adobe Update quit unexpectedly." Then he said it was an installing issue and turned me to the forums. Help, please?

    JohnEden I would recommend running all available uninstallers to remove the current installation.  The uninstallers are located in the Applications/Utilities/Adobe Installers folder.  Once you have ran the uninstallers then please also utilize the CC Cleaner Tool for a complete removal.  You can find details on how to utilize the CC Cleaner Tool at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

  • Error when installing issue in Content Viewer

    Hi,
    I have a strange error in my Content Viewer.
    When downloading it stalls and a message says "Could not install issue, relaunch app and download your purchase again" (my translation from swedish).
    It sometimes stalls when downloading and sometimes when installing issue.
    Anyone got a solution or having the same problem?
    Br
    Henrik

    Henrik, this can be either or. The internal Acrobat.com servers seem to have download issues once a week or so.
    The best way I think you can determine this is if the download is failing at the same point during the download. If it is, it's a problem with the folio. If it's not, then it's a temporary problems with the servers.
    If it is a problem with the folio, there's no straightforward answer -- but if you were able to download that folio recently, delete or update the articles you've added since.
    If you have no idea what's causing it, you can either start deleting articles, or try updating them first.

  • CS5 install issue? only appears to be a frame instead of filling the scree on Mac osx

    CS5 install issue? only appears to be a frame instead of filling the screen on Mac osx
    When I click on the middle it takes me back to the desktop

    Hi,
    I would recommend posting this query in the Adobe Photoshop forum.
    You will get a specific response relevant to this question.
    Thanks

  • Itune 64 install issues

      I'm having a lot of install issues appear when I try to install latest version of iTunes 64.  Error message "signatures is old or not valid".  Any suggestions?

    I have seen this work for the issue you described
    Remove iTunes and it's parts
    http://support.apple.com/kb/HT204275
    iTunes 12.1.1 for Windows
    https://support.apple.com/kb/DL1784?locale=en_US

  • Can' t read disk label, install issues

    can' t read disk label, install issues
    i am trying to install solaris 8 on a sparc5 (256mb, 4.2gb,110mhz). i initially installed using the installation disk and it seemed successful as i was able to load the rest of the cds. something went wrong though b/c the system is stuck in a rebooting loop after it finished the last cd. so i went searching and found that i could only have a root partition of no bigger than 1gb. since i used the installation disk, i was not given an option to specify slice sizes. so now, i am trying to redo the install starting from the first disk (1 of 2) and skipping the installation disk. when i do a "boot cdrom" with the 1 of 2 disk, i get the cant read disk label or something about short entry and it will not boot. i am using actual Solaris 8 cds and not downloads. what can i do to get it to boot up from the first disk, or fix the partitioning on the disk?

    I am using the offical Solaris 8 Installation 2/02 for SPARC Platform Edition for Sun Computer Systems February 2002, Revision A
    Output from the probe-ide command follows:
    device 0 (Primary Master)
    ATA Model: ST3160023A
    device 1 (Primary Slave)
    Removable ATAPI Model: LTN4865
    device 2 (Secondary Master)
    ATA Model: ST340016A
    device 3 (Secondary Slave)
    not present
    device 0 is the new hard disk that I just installed
    device 1 is the CDR drive
    device 2 is the original hard disk. I can boot this but now get some magic disk errors or something like that
    device 3 is not present
    I have all devices set to cable select according to the manual.
    Thanks for your help...
    Tom

  • Windows xp itunes install issue

    I am attempting to install Itunes using Windows XP at Service Pack 3 with all the security updates installed. The instal begins and during the final process of setup, I receive the following error message and the Itunes instal backs out and stops.
    Error message, " These is a problem with this Windows Installer package. Aprogram run as part of the setup did not finish as expected. Contact your support personnel or package vendor".
    I am looking for some advice after working on the Apple and Microsoft website's trying to find a solution.

    Thank You B Noir for the helping hand in reapiring my problem in loading Itunes.
    I ended up working with an Apple Service Tech who had me delete all the programs associated with the Apples Itune install. Quicktime, Apple Application Support, Apple Modile Device Support, Bonjour and Apple Software Update.
    Each of the programs were un-installed with no issues until we started the uninstall of Apple Software Update, which your note indicated could be a cause for the install issue.
    Using the Windows program "Fixit" downloaded off the Microsoft website, we determined that the registry keys for this program had become corrupted. We used Fixit filtering down to an install repair module inside if Fixit to remove the damaged program from my PC's registry then Fixit uninstalled the Apple Software Update program.
    Once this was done, we were able to successfully instal Itunes using the latest Itunes install packaged found on the Apple website.
    Thanks Again for your advice.

  • Instal issues with WRE54G

    I have problems when trying to install the Expander. I am running the CD ROM thru my laptop which is located right next to my router (Netgear Rangemax WPN824) The Wizard finds my wireless network and I confirm it. Though when it searches for the Expander my connection to my wireless network is cut off and thus it can't find the Expander. It is only when the Wizard searches for the WRE54G that this happens. By searching for the Expander it somehow is interfering with my wireless connection and halting the process. I have tried resetting the Expander but I seem to be getting no where.
    I then connected the RE to my Router and pressed the Auto config button and it seems to work. Does that seem right?
    Message Edited by JLow on 02-16-2008 05:05 AM
    Message Edited by JLow on 02-16-2008 05:06 AM

    As you are using Range Extender .... few things you need to do ....
    Make sure that the wireless security on the router is turned off.
    Disable all firewall & antivirus on the computer .....
    Connect the computer to the Range Extender .... assign static Ip to the computer .... access range extender setup page ....
    Configure the wireless settings same as in the router .... power cycle the network ....
    Try to ping the address from the wired computer of the router ....
    Hope it works for you ....

  • Client Install Issue - SCCM 2012 R2 - Manual Deploy Installed ok

    Hello, I have sccm 2012 configured with 2,000 machine approx. It is been used mainly as a Software Deployment tool for now. On checking a recent IE10 upgrade, I noticed that there is a number of machines that do not have the client installed (and thus did
    not upgrade IE). I picked 1 machine, searched in SCCM - had no client. I checked all relevant settings:
    Boundary for Client in question - ok
    Local Client Settings (ip,dns,no firewall, ping sccm ok and vice versa etc).
    Once i right clicked to deploy the client, it installed no problem. I checked the ccmsetup log file and the only info it had was from the time that the client was manually deployed (I will attach the log below anyway). I am really puzzled as to why the client
    did not install and if this is the issue why IE is not upgrading (it is hard to pinpoint as there are 250 sites approx). The automatic install task works no problem on other machines once the machine goes online.
    Any help, would be great. Here is the log (I am fairly new to SCCM btw):
    SCCM 2012 R2 - Windows 7 SP1 32 Bit
    ==========[ ccmsetup started in process 7196 ]==========    ccmsetup    05/02/2015 16:28:39    4100 (0x1004)
    Running on platform X86    ccmsetup    05/02/2015 16:28:39    4100 (0x1004)
    Launch from folder C:\Windows\ccmsetup\    ccmsetup    05/02/2015 16:28:39    4100 (0x1004)
    CcmSetup version: 5.0.7958.1401    ccmsetup    05/02/2015 16:28:39    4100 (0x1004)
    In ServiceMain    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Running on 'Microsoft Windows 7 Enterprise ' (6.1.7601). Service Pack (1.0). SuiteMask = 272. Product Type = 18    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /ForceInstall /config:MobileClient.tcf    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Command line parameters for ccmsetup have been specified.  No registry lookup for command line parameters is required.    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /ForceInstall /config:MobileClient.tcf    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    SslState value: 224    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    CCMHTTPPORT:    80    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    CCMHTTPSPORT:    443    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    CCMHTTPSSTATE:    224    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    CCMHTTPSCERTNAME:        ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    FSP:    COLSCCM01.LC-UK.ORG    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    CCMFIRSTCERT:    1    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Config file:      C:\Windows\ccmsetup\MobileClientUnicode.tcf    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Retry time:       10 minute(s)    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    MSI log file:     C:\Windows\ccmsetup\Logs\client.msi.log    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    MSI properties:    INSTALL="ALL" SMSSITECODE="COL" FSP="COLSCCM01.LC-UK.ORG" SMSCACHESIZE="10240" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"  
     ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Source List:    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
                      \\COLSCCM01.lc-uk.org\SMSClient    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
                      \\COLSCCM01.LC-UK.ORG\SMSClient    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    MPs:    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
                      COLSCCM01.lc-uk.org    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    No version of the client is currently detected.    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Folder 'Microsoft\Configuration Manager' not found. Task does not exist.    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Updated security on object C:\Windows\ccmsetup\.    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Sending Fallback Status Point message to 'COLSCCM01.LC-UK.ORG', STATEID='100'.    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Failed to get client version for sending messages to FSP. Error 0x8004100e    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    Params to send FSP message '5.0.7958.1401 Deployment '    ccmsetup    05/02/2015 16:28:39    500 (0x01F4)
    State message with TopicType 800 and TopicId {19607F6A-0C46-488C-B28D-36640FB0DF94} has been sent to the FSP    FSPStateMessage    05/02/2015 16:28:40    500 (0x01F4)
    Running as user "SYSTEM"    ccmsetup    05/02/2015 16:28:40    500 (0x01F4)
    Detected 434753 MB free disk space on system drive.    ccmsetup    05/02/2015 16:28:40    500 (0x01F4)
    Checking Write Filter Status.    ccmsetup    05/02/2015 16:28:40    500 (0x01F4)
    This is not a supported write filter device. We are not in a write filter maintenance mode.    ccmsetup    05/02/2015 16:28:40    500 (0x01F4)
    Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=COL))'    ccmsetup    05/02/2015 16:28:40    500 (0x01F4)
    OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>224</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers></CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>COL</RootSiteCode><CCM>
    <CommandLine>SMSSITECODE=COL FSP=colsccm01.lc-uk.org SMSCACHESIZE=10240</CommandLine> </CCM><FSP> <FSPServer>COLSCCM01.lc-uk.org</FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState"
    Value="0" /></Capabilities><Domain Value="lc-uk.org" /><Forest Value="lc-uk.org" /></ClientOperationalSettings>'    ccmsetup    05/02/2015 16:28:41    500
    (0x01F4)
    Unable to open Registry key Software\Microsoft\CCM. Return Code [80070002]. Client HTTPS state is Unknown.    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    The MP name retrieved is 'COLSCCM01.lc-uk.org' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>'    ccmsetup  
     05/02/2015 16:28:41    500 (0x01F4)
    MP 'COLSCCM01.lc-uk.org' is compatible    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    Retrieved 1 MP records from AD for site 'COL'    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    Retrived site version '5.00.7958.1000' from AD for site 'COL'    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    SiteCode:         COL    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    SiteVersion:      5.00.7958.1000    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    Only one MP COLSCCM01.lc-uk.org is specified. Use it.    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    Searching for DP locations from MP(s)...    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    Current AD site of machine is Millbank    LocationServices    05/02/2015 16:28:41    500 (0x01F4)
    Local Machine is joined to an AD domain    LocationServices    05/02/2015 16:28:41    500 (0x01F4)
    Current AD forest name is lc-uk.org, domain name is lc-uk.org    LocationServices    05/02/2015 16:28:41    500 (0x01F4)
    DhcpGetOriginalSubnetMask entry point is supported.    LocationServices    05/02/2015 16:28:41    500 (0x01F4)
    Begin checking Alternate Network Configuration    LocationServices    05/02/2015 16:28:41    500 (0x01F4)
    Finished checking Alternate Network Configuration    LocationServices    05/02/2015 16:28:41    500 (0x01F4)
    Adapter {743579BD-D66A-4BF9-B487-2AAC075B9473} is DHCP enabled. Checking quarantine status.    LocationServices    05/02/2015 16:28:41    500 (0x01F4)
    Adapter {8F25ACE0-AE8A-45DD-BF3D-F1315E2B9974} is DHCP enabled. Checking quarantine status.    LocationServices    05/02/2015 16:28:41    500 (0x01F4)
    Adapter {8AE4D673-90E8-4FCF-AE50-79474ADC6190} is DHCP enabled. Checking quarantine status.    LocationServices    05/02/2015 16:28:41    500 (0x01F4)
    Adapter {9AA2CA9C-0C0A-48E3-B67E-F9E574AE9DB2} is DHCP enabled. Checking quarantine status.    LocationServices    05/02/2015 16:28:41    500 (0x01F4)
    Sending message body '<ContentLocationRequest SchemaVersion="1.00">
      <AssignedSite SiteCode="COL"/>
      <ClientPackage/>
      <ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
    UseInternetDP="0">
        <ADSite Name="Millbank"/>
        <Forest Name="lc-uk.org"/>
        <Domain Name="lc-uk.org"/>
        <IPAddresses>
    <IPAddress SubnetAddress="10.103.38.0" Address="10.103.38.10"/>
        </IPAddresses>
      </ClientLocationInfo>
    </ContentLocationRequest>
    '    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    Sending message header '<Msg SchemaVersion="1.1"><ID>{57972056-54D4-461F-B818-D3420A0B5C51}</ID><SourceHost>LCD14572</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:LCD14572:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>COLSCCM01.lc-uk.org</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2015-02-05T16:28:41Z</SentTime><Body
    Type="ByteRange" Offset="0" Length="1084"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>'    ccmsetup    05/02/2015
    16:28:41    500 (0x01F4)
    CCM_POST 'HTTP://COLSCCM01.lc-uk.org/ccm_system/request'    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    Content boundary is '--aAbBcCdDv1234567890VxXyYzZ'    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    Received header '<Msg SchemaVersion="1.1">
        <ID>{48D22538-0FEA-44E6-AAD2-1829DDED2223}</ID>
        <SourceID>GUID:A5143C3E-EA22-4B93-BFF5-B8B859F869F5</SourceID>
        <SourceHost>COLSCCM01</SourceHost>
        <TargetAddress>direct:LCD14572:LS_ReplyLocations</TargetAddress>
        <ReplyTo>MP_LocationManager</ReplyTo>
        <CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
        <Priority>3</Priority>
        <Timeout>600</Timeout>
        <TargetHost>LCD14572</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2015-02-05T16:28:39Z</SentTime><Body
    Type="ByteRange" Offset="0" Length="2378"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
    Name="AuthSenderMachine">COLSCCM01;COLSCCM01.lc-uk.org;</Property><Property Name="MPSiteCode">COL</Property></Hook></Hooks><Payload Type="inline"/></Msg>'    ccmsetup  
     05/02/2015 16:28:41    500 (0x01F4)
    Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="COL" MasterSiteCode="COL"
    SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002" Signature="http://COLSCCM01.lc-uk.org/SMS_DP_SMSSIG$/COL00002"/><ADSite
    Name="Millbank"/><IPSubnets><IPSubnet Address="10.20.0.0"/><IPSubnet Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property
    Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>COLSCCM01.lc-uk.org</ServerRemoteName><DPType>SERVER</DPType><Windows Trust="1"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage
    FullPackageID="COL00002" FullPackageVersion="2" FullPackageHash="DB3D5D115FC93F6275817FB9791864D98D4AF6897339B9D4AB1C0DE456C240A8" MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false"
    LastModifiedTime="30376953;932870912" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'    ccmsetup    05/02/2015
    16:28:41    500 (0x01F4)
    Found local location 'http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002'    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    Discovered 1 local DP locations.    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    PROPFIND 'http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002'    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    Got 401 challenge Retrying with Windows Auth...    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    PROPFIND 'http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002'    ccmsetup    05/02/2015 16:28:41    500 (0x01F4)
    Using DP location http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    GET 'http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002/ccmsetup.cab'    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Got 401 challenge Retrying with Windows Auth...    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    GET 'http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002/ccmsetup.cab'    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from manifest    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000'    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Site version '5.00.7958.1000' is compatible. Client deployment will continue.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Location 'http://COLSCCM01.lc-uk.org/SMS_DP_SMSPKG$/COL00002' passed site version check.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Successfully loaded ccmsetup manifest file.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1401'    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Running from temp downloaded folder or manifest is not newer than ccmsetup.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'i386/vcredist_x86.exe' is applicable. Add to the list.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'x64/vcredist_x64.exe' is not applicable.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'i386/vc50727_x86.exe' is applicable. Add to the list.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'x64/vc50727_x64.exe' is not applicable.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'i386/WindowsUpdateAgent30-x86.exe' is applicable. Add to the list.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'x64/WindowsUpdateAgent30-x64.exe' is not applicable.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'i386/msxml6.msi' is applicable. Add to the list.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'x64/msxml6_x64.msi' is not applicable.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'i386/msrdcoob_x86.exe' is not applicable.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'x64/msrdcoob_amd64.exe' is not applicable.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'pkgmgr.exe' is not applicable.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'dism.exe' is applicable. Add to the list.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'wimgapi.msi' is not applicable.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'i386/MicrosoftPolicyPlatformSetup.msi' is applicable. Add to the list.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'x64/MicrosoftPolicyPlatformSetup.msi' is not applicable.    ccmsetup    05/02/2015 16:28:42    500 (0x01F4)
    Item 'i386/WindowsFirewallConfigurationProvider.msi' is applicable. Add to the list.    ccmsetup    05/02/2015 1

    Hi, Yes i had a look at the log yesterday. there are errors initially, but then the install completes. I can copy the whole log here, the machine in question is LCD14572. If you could take a look would be great. Still doesnt explain why i had to manually
    push the client though:
    Execute query exec [sp_CP_GetPushRequestMachineResource] 2097154539    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:05:58    3648 (0x0E40)
    Execute query exec [sp_CP_GetPushMachineName] 2097154539    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:05:58    3648 (0x0E40)
    Received request: "2097154539" for machine name: "LCD15000" on queue: "Retry".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:05:58    3648 (0x0E40)
    Stored request "2097154539", machine name "LCD15000", in queue "Processing".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:05:58    3648 (0x0E40)
    Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097154539, 1    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:05:58    3648 (0x0E40)
    ----- Started a new CCR processing thread. Thread ID is 0x12d8. There are now 1 processing threads    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    Submitted request successfully    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    Getting a new request from queue "Retry" after 100 millisecond delay.    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    Found CCR "2097154540.ccr" in queue "Retry".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    ======>Begin Processing request: "2097154539", machine name: "LCD15000"    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    4824 (0x12D8)
    Execute query exec [sp_IsMPAvailable] N'COL'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    4824 (0x12D8)
    ---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    4824 (0x12D8)
    ---> Attempting to connect to administrative share '\\LCD15000\admin$' using account 'LC-UK\VAdmin'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    4824 (0x12D8)
    Execute query exec [sp_CP_GetPushRequestMachine] 2097154540    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    Successfully retrieved information for machine LCD14589 from DB    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    Execute query exec [sp_CP_GetPushRequestMachineIP] 2097154540    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    Execute query exec [sp_CP_GetPushRequestMachineResource] 2097154540    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    Execute query exec [sp_CP_GetPushMachineName] 2097154540    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    Received request: "2097154540" for machine name: "LCD14589" on queue: "Retry".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    Stored request "2097154540", machine name "LCD14589", in queue "Processing".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097154540, 1    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:00    3648 (0x0E40)
    ----- Started a new CCR processing thread. Thread ID is 0x1d10. There are now 2 processing threads    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    Submitted request successfully    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    Getting a new request from queue "Retry" after 100 millisecond delay.    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    Found CCR "2097154542.ccr" in queue "Retry".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    ======>Begin Processing request: "2097154540", machine name: "LCD14589"    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    7440 (0x1D10)
    Execute query exec [sp_IsMPAvailable] N'COL'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    7440 (0x1D10)
    ---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    7440 (0x1D10)
    ---> Attempting to connect to administrative share '\\LCD14589\admin$' using account 'LC-UK\VAdmin'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    7440 (0x1D10)
    Execute query exec [sp_CP_GetPushRequestMachine] 2097154542    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    Successfully retrieved information for machine LCD14571 from DB    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    Execute query exec [sp_CP_GetPushRequestMachineIP] 2097154542    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    Execute query exec [sp_CP_GetPushRequestMachineResource] 2097154542    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    Execute query exec [sp_CP_GetPushMachineName] 2097154542    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    Received request: "2097154542" for machine name: "LCD14571" on queue: "Retry".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    Stored request "2097154542", machine name "LCD14571", in queue "Processing".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097154542, 1    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:02    3648 (0x0E40)
    ----- Started a new CCR processing thread. Thread ID is 0x1768. There are now 3 processing threads    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:04    3648 (0x0E40)
    Submitted request successfully    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:04    3648 (0x0E40)
    Getting a new request from queue "Retry" after 100 millisecond delay.    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:04    3648 (0x0E40)
    Sleeping for 60 minutes for queue "Retry".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:04    3648 (0x0E40)
    ======>Begin Processing request: "2097154542", machine name: "LCD14571"    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:04    5992 (0x1768)
    Execute query exec [sp_IsMPAvailable] N'COL'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:05    5992 (0x1768)
    ---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:05    5992 (0x1768)
    ---> Attempting to connect to administrative share '\\LCD14571\admin$' using account 'LC-UK\VAdmin'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:05    5992 (0x1768)
    ---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:21    4824 (0x12D8)
    ---> The device LCD15000 does not exist on the network. Giving up    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:21    4824 (0x12D8)
    ---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:21    4824 (0x12D8)
    ---> Attempting to connect to administrative share '\\LCD15000.lc-uk.org\admin$' using account 'LC-UK\VAdmin'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:21    4824 (0x12D8)
    ---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:23    7440 (0x1D10)
    ---> The device LCD14589 does not exist on the network. Giving up    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:23    7440 (0x1D10)
    ---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:23    7440 (0x1D10)
    ---> Attempting to connect to administrative share '\\LCD14589.lc-uk.org\admin$' using account 'LC-UK\VAdmin'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:23    7440 (0x1D10)
    ---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:26    5992 (0x1768)
    ---> The device LCD14571 does not exist on the network. Giving up    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:26    5992 (0x1768)
    ---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:26    5992 (0x1768)
    ---> Attempting to connect to administrative share '\\LCD14571.lc-uk.org\admin$' using account 'LC-UK\VAdmin'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:26    5992 (0x1768)
    ---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47    4824 (0x12D8)
    ---> The device LCD15000.lc-uk.org does not exist on the network. Giving up    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47    4824 (0x12D8)
    ---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47    4824 (0x12D8)
    ---> Attempting to connect to administrative share '\\LCD15000\admin$' using account 'LC-UK\VAdmin'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47    4824 (0x12D8)
    ---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47    4824 (0x12D8)
    ---> The device LCD15000 does not exist on the network. Giving up    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47    4824 (0x12D8)
    ---> ERROR: Unable to access target machine for request: "2097154539", machine name: "LCD15000",  access denied or invalid network path.    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47  
     4824 (0x12D8)
    Execute query exec [sp_CP_SetLastErrorCode] 2097154539, 53    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47    4824 (0x12D8)
    Stored request "2097154539", machine name "LCD15000", in queue "Retry".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47    4824 (0x12D8)
    Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097154539, 2    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47    4824 (0x12D8)
    Execute query exec [sp_CP_SetLatest] 2097154539, N'02/05/2015 16:06:47', 2    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47    4824 (0x12D8)
    <======End request: "2097154539", machine name: "LCD15000".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:47    4824 (0x12D8)
    ---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51    7440 (0x1D10)
    ---> The device LCD14589.lc-uk.org does not exist on the network. Giving up    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51    7440 (0x1D10)
    ---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51    7440 (0x1D10)
    ---> Attempting to connect to administrative share '\\LCD14589\admin$' using account 'LC-UK\VAdmin'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51    7440 (0x1D10)
    ---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51    7440 (0x1D10)
    ---> The device LCD14589 does not exist on the network. Giving up    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51    7440 (0x1D10)
    ---> ERROR: Unable to access target machine for request: "2097154540", machine name: "LCD14589",  access denied or invalid network path.    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51  
     7440 (0x1D10)
    Execute query exec [sp_CP_SetLastErrorCode] 2097154540, 53    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51    7440 (0x1D10)
    Stored request "2097154540", machine name "LCD14589", in queue "Retry".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51    7440 (0x1D10)
    Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097154540, 2    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51    7440 (0x1D10)
    Execute query exec [sp_CP_SetLatest] 2097154540, N'02/05/2015 16:06:51', 2    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51    7440 (0x1D10)
    <======End request: "2097154540", machine name: "LCD14589".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:51    7440 (0x1D10)
    ---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55    5992 (0x1768)
    ---> The device LCD14571.lc-uk.org does not exist on the network. Giving up    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55    5992 (0x1768)
    ---> Trying the 'best-shot' account which worked for previous CCRs (index = 0x0)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55    5992 (0x1768)
    ---> Attempting to connect to administrative share '\\LCD14571\admin$' using account 'LC-UK\VAdmin'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55    5992 (0x1768)
    ---> WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account LC-UK\VAdmin (00000035)    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55    5992 (0x1768)
    ---> The device LCD14571 does not exist on the network. Giving up    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55    5992 (0x1768)
    ---> ERROR: Unable to access target machine for request: "2097154542", machine name: "LCD14571",  access denied or invalid network path.    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55  
     5992 (0x1768)
    Execute query exec [sp_CP_SetLastErrorCode] 2097154542, 53    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55    5992 (0x1768)
    Stored request "2097154542", machine name "LCD14571", in queue "Retry".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55    5992 (0x1768)
    Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097154542, 2    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55    5992 (0x1768)
    Execute query exec [sp_CP_SetLatest] 2097154542, N'02/05/2015 16:06:55', 2    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55    5992 (0x1768)
    <======End request: "2097154542", machine name: "LCD14571".    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:06:55    5992 (0x1768)
    CCR count in queue "Retry" is 3.    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:07:42    6564 (0x19A4)
    Sleeping for 634 seconds...    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:07:43    6564 (0x19A4)
    Thread has been inactive too long. Closing thread    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:16:47    4824 (0x12D8)
    --- This thread is terminating due to inactivity    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:16:47    4824 (0x12D8)
    ----- Terminated CCR processing thread. There are now 2 processing threads    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:16:47    4824 (0x12D8)
    Thread has been inactive too long. Closing thread    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:16:51    7440 (0x1D10)
    --- This thread is terminating due to inactivity    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:16:51    7440 (0x1D10)
    ----- Terminated CCR processing thread. There are now 1 processing threads    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:16:51    7440 (0x1D10)
    Thread has been inactive too long. Closing thread    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:16:55    5992 (0x1768)
    --- This thread is terminating due to inactivity    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:16:55    5992 (0x1768)
    ----- Terminated CCR processing thread. There are now 0 processing threads    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:16:55    5992 (0x1768)
    Sleeping for 1 seconds...    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:16    6564 (0x19A4)
    The Site Control File has not changed since the last parameter update.    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:17    6564 (0x19A4)
    Updating Site Parameters    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    MP Ports: 80    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    IISPreferedPort: 80    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    MP SSL Ports: 443    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    IISSSLPreferedPort: 443    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Default MP: COLSCCM01.lc-uk.org    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Default MP Type: 1    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Default MP: [None]    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Certificate Selection Criteria:    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Certificate Store:    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    SSL State: 224    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Select First Certificate: 1    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Certificate Issuers:    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Checking configuration information for server: COLSCCM01.LC-UK.ORG.    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Checking configuration information for server: COLSCCM01.LC-UK.ORG.    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Fallback Status Point: COLSCCM01.lc-uk.org    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Install on DC: False    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Option for installing using IP address: 0    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Sleeping for 1200 seconds...    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:18:18    6564 (0x19A4)
    Waiting for change in directory "D:\Program Files\Microsoft Configuration Manager\inboxes\ccr.box" for queue "Incoming", (30 minute backup timeout).    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:23:39  
     2876 (0x0B3C)
    Execute query exec [sp_CP_GetNewPushMachines] N'COL'    SMS_CLIENT_CONFIG_MANAGER    05/02/2015 16:28:09    2876 (0x0B3C)
    Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097154468, 1    SMS_CLIENT_CONF

  • APEX Listener 1.1.4 install issue with listener configuration

    Oracle XE 11gR2
    APEX 4.1.1
    APEX Listener 1.1.4
    Glassfish 3.0.1
    =============
    Installing APEX Listener 1.1.4 to replace APEX Listener 1.0.2. Deployed apex.war file but now:
    (1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images. Still I can enter data into fields. Wonder why the graphics/images are missing when page is rendered.
    (2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". I can connect via SQL Developer to APEX_PUBLIC_USER with same credentials. I was able to connect before with previous APEX Listener.
    Any ideas?

    Hi,
    (1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images.
    You either have to clean your browser cache or your browser is too old/not capable of rendering the css of APEX Listener correctly.
    (2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". "Permission denied" doesn't sound an issue with your database configuration. Do you have anything in your APEX Listeners log (probably within your GFs server.log) for that issue?
    But perhaps the error disappears as soon as you also get a proper configuration page.
    -Udo

  • (Solved) Install Issues

    I have been going through the install, installed base, updated and followed wiki for rest of install . However there are 2 issues stopping the finalisation of the install.
    1. Cannot get Xserver to work
    2. Cannot get Gdm to work
    I have tried many different configs for xorg.conf, I have I believe install all drivers(as per wiki) and been reading the xorg.0.log file and troubleshooting those errors but still no go. Here is my last log file which really doesn't seem to have any great error at all but still it wont work. Can I get a hand to get this thing going please.
    X Window System Version 7.2.0
    Release Date: 22 January 2007
    X Protocol Version 11, Revision 0, Release 7.2
    Build Operating System: UNKNOWN
    Current Operating System: Linux myhost 2.6.21-ARCH #1 SMP PREEMPT Mon Jun 11 23:47:51 CEST 2007 i686
    Build Date: 08 April 2007
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 19 14:28:57 2007
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "layout1"
    (**) |-->Screen "screen1" (0)
    (**) | |-->Monitor "monitor1"
    (**) | |-->Device "device1"
    (**) |-->Input Device "Keyboard1"
    (**) |-->Input Device "Mouse1"
    (**) FontPath set to:
    unix/:-1,
    /usr/share/fonts/misc:unscaled
    (==) RgbPath set to "/usr/share/X11/rgb"
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (**) Option "AllowMouseOpenFail"
    (**) Extension "Composite" is enabled
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x81c44a0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 1.1
    X.Org XInput driver : 0.7
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules//libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.1
    (--) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 8086,2570 card 1458,2570 rev 02 class 06,00,00 hdr 00
    (II) PCI: 00:01:0: chip 8086,2571 card 0000,0000 rev 02 class 06,04,00 hdr 01
    (II) PCI: 00:03:0: chip 8086,2573 card 0000,0000 rev 02 class 06,04,00 hdr 01
    (II) PCI: 00:1d:0: chip 8086,24d2 card 1458,24d2 rev 02 class 0c,03,00 hdr 80
    (II) PCI: 00:1d:1: chip 8086,24d4 card 1458,24d2 rev 02 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:2: chip 8086,24d7 card 1458,24d2 rev 02 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:3: chip 8086,24de card 1458,24d2 rev 02 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:7: chip 8086,24dd card 1458,5006 rev 02 class 0c,03,20 hdr 00
    (II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev c2 class 06,04,00 hdr 01
    (II) PCI: 00:1f:0: chip 8086,24d0 card 0000,0000 rev 02 class 06,01,00 hdr 80
    (II) PCI: 00:1f:1: chip 8086,24db card 1458,24d2 rev 02 class 01,01,8a hdr 00
    (II) PCI: 00:1f:2: chip 8086,24d1 card 1458,24d1 rev 02 class 01,01,8f hdr 00
    (II) PCI: 00:1f:3: chip 8086,24d3 card 1458,24d2 rev 02 class 0c,05,00 hdr 00
    (II) PCI: 00:1f:5: chip 8086,24d5 card 1458,a002 rev 02 class 04,01,00 hdr 00
    (II) PCI: 01:00:0: chip 10de,0314 card 1554,1145 rev a1 class 03,00,00 hdr 00
    (II) PCI: 02:01:0: chip 8086,1019 card 1458,1019 rev 00 class 02,00,00 hdr 00
    (II) PCI: 03:02:0: chip 1317,0985 card 1113,1216 rev 11 class 02,00,00 hdr 00
    (II) PCI: 03:03:0: chip 14f1,8800 card 107d,6611 rev 05 class 04,00,00 hdr 80
    (II) PCI: 03:05:0: chip 104c,8024 card 1458,1000 rev 00 class 0c,00,10 hdr 00
    (II) PCI: End of PCI scan
    (II) Intel Bridge workaround enabled
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
    (II) Bus 1 non-prefetchable memory range:
    [0] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[b]
    (II) Bus 1 prefetchable memory range:
    [0] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:3:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 2 I/O range:
    [0] -1 0 0x00009000 - 0x000090ff (0x100) IX[b]
    [1] -1 0 0x00009400 - 0x000094ff (0x100) IX[b]
    [2] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
    [3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b]
    (II) Bus 2 non-prefetchable memory range:
    [0] -1 0 0xfd000000 - 0xfd0fffff (0x100000) MX[b]
    (II) Subtractive PCI-to-PCI bridge:
    (II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 3 I/O range:
    [0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
    [1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
    [2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
    [3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[b]
    (II) Bus 3 non-prefetchable memory range:
    [0] -1 0 0xfa000000 - 0xfcffffff (0x3000000) MX[b]
    (II) Bus 3 prefetchable memory range:
    [0] -1 0 0x30000000 - 0x300fffff (0x100000) MX[b]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (--) PCI:*(1:0:0) nVidia Corporation NV31 [GeForce FX 5600XT] rev 161, Mem @ 0xf8000000/24, 0xe0000000/28
    (--) PCI: (3:3:0) unknown vendor (0x14f1) unknown chipset (0x8800) rev 5, Mem @ 0xfb000000/24
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) PCI Memory resource overlap reduced 0xf0000000 from 0xf7ffffff to 0xefffffff
    (II) Active PCI resource ranges:
    [0] -1 0 0xfc000000 - 0xfc003fff (0x4000) MX[b]
    [1] -1 0 0xfc004000 - 0xfc0047ff (0x800) MX[b]
    [2] -1 0 0xfc005000 - 0xfc0053ff (0x400) MX[b]
    [3] -1 0 0xfd000000 - 0xfd01ffff (0x20000) MX[b]
    [4] -1 0 0xfd102000 - 0xfd1020ff (0x100) MX[b]
    [5] -1 0 0xfd101000 - 0xfd1011ff (0x200) MX[b]
    [6] -1 0 0x30100000 - 0x301003ff (0x400) MX[b]
    [7] -1 0 0xfd100000 - 0xfd1003ff (0x400) MX[b]
    [8] -1 0 0xf0000000 - 0xefffffff (0x0) MX[b]O
    [9] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
    [10] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
    [11] -1 0 0xf8000000 - 0xf8ffffff (0x1000000) MX[b](B)
    [12] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
    [13] -1 0 0x00009000 - 0x0000901f (0x20) IX[b]
    [14] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[b]
    [15] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
    [16] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
    [17] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
    [18] -1 0 0x0000cc00 - 0x0000cc03 (0x4) IX[b]
    [19] -1 0 0x0000c800 - 0x0000c807 (0x8) IX[b]
    [20] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
    [21] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
    [22] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
    [23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [27] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[b]
    [28] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[b]
    [29] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
    [30] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xfc000000 - 0xfc003fff (0x4000) MX[b]
    [1] -1 0 0xfc004000 - 0xfc0047ff (0x800) MX[b]
    [2] -1 0 0xfc005000 - 0xfc0053ff (0x400) MX[b]
    [3] -1 0 0xfd000000 - 0xfd01ffff (0x20000) MX[b]
    [4] -1 0 0xfd102000 - 0xfd1020ff (0x100) MX[b]
    [5] -1 0 0xfd101000 - 0xfd1011ff (0x200) MX[b]
    [6] -1 0 0x30100000 - 0x301003ff (0x400) MX[b]
    [7] -1 0 0xfd100000 - 0xfd1003ff (0x400) MX[b]
    [8] -1 0 0xf0000000 - 0xefffffff (0x0) MX[b]O
    [9] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
    [10] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
    [11] -1 0 0xf8000000 - 0xf8ffffff (0x1000000) MX[b](B)
    [12] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
    [13] -1 0 0x00009000 - 0x0000901f (0x20) IX[b]
    [14] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[b]
    [15] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
    [16] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
    [17] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
    [18] -1 0 0x0000cc00 - 0x0000cc03 (0x4) IX[b]
    [19] -1 0 0x0000c800 - 0x0000c807 (0x8) IX[b]
    [20] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
    [21] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
    [22] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
    [23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [27] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[b]
    [28] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[b]
    [29] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
    [30] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x300fffff (0x30000000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x300fffff (0x30000000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xfc000000 - 0xfc003fff (0x4000) MX[b]
    [5] -1 0 0xfc004000 - 0xfc0047ff (0x800) MX[b]
    [6] -1 0 0xfc005000 - 0xfc0053ff (0x400) MX[b]
    [7] -1 0 0xfd000000 - 0xfd01ffff (0x20000) MX[b]
    [8] -1 0 0xfd102000 - 0xfd1020ff (0x100) MX[b]
    [9] -1 0 0xfd101000 - 0xfd1011ff (0x200) MX[b]
    [10] -1 0 0x30100000 - 0x301003ff (0x400) MX[b]
    [11] -1 0 0xfd100000 - 0xfd1003ff (0x400) MX[b]
    [12] -1 0 0xf0000000 - 0xefffffff (0x0) MX[b]O
    [13] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
    [14] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
    [15] -1 0 0xf8000000 - 0xf8ffffff (0x1000000) MX[b](B)
    [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [18] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
    [19] -1 0 0x00009000 - 0x0000901f (0x20) IX[b]
    [20] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[b]
    [21] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
    [22] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
    [23] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
    [24] -1 0 0x0000cc00 - 0x0000cc03 (0x4) IX[b]
    [25] -1 0 0x0000c800 - 0x0000c807 (0x8) IX[b]
    [26] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
    [27] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
    [28] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
    [29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [31] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [32] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [33] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[b]
    [34] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[b]
    [35] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
    [36] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "v4l"
    (II) Loading /usr/lib/xorg/modules/drivers//v4l_drv.so
    (II) Module v4l: vendor="X.Org Foundation"
    compiled for 7.1.1, module version = 0.1.1
    ABI class: X.Org Video Driver, version 1.0
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "type1"
    (II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
    (II) Module type1: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.2
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font Type1
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 7.2.0, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "/usr/lib/xorg/modules/extensions/nvidia/libglx.so" (glx)
    (WW) LoadModule: given non-canonical module name "/usr/lib/xorg/modules/extensions/nvidia/libglx.so"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.9755
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.1
    (II) Loading extension GLX
    (II) LoadModule: "glx"
    (II) Reloading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Loading extension GLX
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.9755
    Module class: X.Org Video Driver
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.1.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.7
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.1.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.7
    (II) v4l driver for Video4Linux
    (II) NVIDIA dlloader X Driver 1.0-9755 Mon Feb 26 23:23:13 PST 2007
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 01:00:0
    (--) Assigning device section with no busID to primary device
    (--) Chipset NVIDIA GPU found
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "wfb"
    (II) LoadModule: "wfb"
    (II) Loading /usr/lib/xorg/modules//libwfb.so
    (II) Module wfb: vendor="NVIDIA Corporation"
    compiled for 7.1.99.2, module version = 1.0.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Loading /usr/lib/xorg/modules//libramdac.so
    (II) Module ramdac: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 1.1
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0x00100000 - 0x300fffff (0x30000000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xfc000000 - 0xfc003fff (0x4000) MX[b]
    [5] -1 0 0xfc004000 - 0xfc0047ff (0x800) MX[b]
    [6] -1 0 0xfc005000 - 0xfc0053ff (0x400) MX[b]
    [7] -1 0 0xfd000000 - 0xfd01ffff (0x20000) MX[b]
    [8] -1 0 0xfd102000 - 0xfd1020ff (0x100) MX[b]
    [9] -1 0 0xfd101000 - 0xfd1011ff (0x200) MX[b]
    [10] -1 0 0x30100000 - 0x301003ff (0x400) MX[b]
    [11] -1 0 0xfd100000 - 0xfd1003ff (0x400) MX[b]
    [12] -1 0 0xf0000000 - 0xefffffff (0x0) MX[b]O
    [13] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
    [14] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
    [15] -1 0 0xf8000000 - 0xf8ffffff (0x1000000) MX[b](B)
    [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [18] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
    [19] -1 0 0x00009000 - 0x0000901f (0x20) IX[b]
    [20] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[b]
    [21] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
    [22] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
    [23] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
    [24] -1 0 0x0000cc00 - 0x0000cc03 (0x4) IX[b]
    [25] -1 0 0x0000c800 - 0x0000c807 (0x8) IX[b]
    [26] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
    [27] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
    [28] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
    [29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [31] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [32] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [33] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[b]
    [34] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[b]
    [35] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
    [36] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0x00100000 - 0x300fffff (0x30000000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xfc000000 - 0xfc003fff (0x4000) MX[b]
    [5] -1 0 0xfc004000 - 0xfc0047ff (0x800) MX[b]
    [6] -1 0 0xfc005000 - 0xfc0053ff (0x400) MX[b]
    [7] -1 0 0xfd000000 - 0xfd01ffff (0x20000) MX[b]
    [8] -1 0 0xfd102000 - 0xfd1020ff (0x100) MX[b]
    [9] -1 0 0xfd101000 - 0xfd1011ff (0x200) MX[b]
    [10] -1 0 0x30100000 - 0x301003ff (0x400) MX[b]
    [11] -1 0 0xfd100000 - 0xfd1003ff (0x400) MX[b]
    [12] -1 0 0xf0000000 - 0xefffffff (0x0) MX[b]O
    [13] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
    [14] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
    [15] -1 0 0xf8000000 - 0xf8ffffff (0x1000000) MX[b](B)
    [16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [21] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
    [22] -1 0 0x00009000 - 0x0000901f (0x20) IX[b]
    [23] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[b]
    [24] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
    [25] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
    [26] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
    [27] -1 0 0x0000cc00 - 0x0000cc03 (0x4) IX[b]
    [28] -1 0 0x0000c800 - 0x0000c807 (0x8) IX[b]
    [29] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
    [30] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
    [31] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
    [32] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [33] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [34] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [35] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [36] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[b]
    [37] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[b]
    [38] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
    [39] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
    [40] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [41] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
    (**) NVIDIA(0): Enabling RENDER acceleration
    (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    (II) NVIDIA(0): enabled.
    (II) NVIDIA(0): NVIDIA GPU GeForce FX 5600XT at PCI:1:0:0 (GPU-0)
    (--) NVIDIA(0): Memory: 131072 kBytes
    (--) NVIDIA(0): VideoBIOS: 04.31.20.69.03
    (II) NVIDIA(0): Detected AGP rate: 8X
    (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    (--) NVIDIA(0): Connected display device(s) on GeForce FX 5600XT at
    (--) NVIDIA(0): PCI:1:0:0:
    (--) NVIDIA(0): Chuntex (CRT-0)
    (--) NVIDIA(0): Chuntex (CRT-0): 400.0 MHz maximum pixel clock
    (II) NVIDIA(0): Assigned Display Device: CRT-0
    (WW) NVIDIA(0): No valid modes for "480x360"; removing.
    (II) NVIDIA(0): Validated modes:
    (II) NVIDIA(0): "1600x1200"
    (II) NVIDIA(0): "1400x1050"
    (II) NVIDIA(0): "1280x1024"
    (II) NVIDIA(0): "1280x960"
    (II) NVIDIA(0): "1152x864"
    (II) NVIDIA(0): "1024x768"
    (II) NVIDIA(0): "832x624"
    (II) NVIDIA(0): "800x600"
    (II) NVIDIA(0): "640x480"
    (II) NVIDIA(0): "320x240"
    (II) NVIDIA(0): Virtual screen size determined to be 1600 x 1200
    (--) NVIDIA(0): DPI set to (123, 121); computed from "UseEdidDpi" X config
    (--) NVIDIA(0): option
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] 0 0 0xe0000000 - 0xefffffff (0x10000000) MX[b]
    [1] 0 0 0xf8000000 - 0xf8ffffff (0x1000000) MX[b]
    [2] -1 0 0x00100000 - 0x300fffff (0x30000000) MX[b]E(B)
    [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [6] -1 0 0xfc000000 - 0xfc003fff (0x4000) MX[b]
    [7] -1 0 0xfc004000 - 0xfc0047ff (0x800) MX[b]
    [8] -1 0 0xfc005000 - 0xfc0053ff (0x400) MX[b]
    [9] -1 0 0xfd000000 - 0xfd01ffff (0x20000) MX[b]
    [10] -1 0 0xfd102000 - 0xfd1020ff (0x100) MX[b]
    [11] -1 0 0xfd101000 - 0xfd1011ff (0x200) MX[b]
    [12] -1 0 0x30100000 - 0x301003ff (0x400) MX[b]
    [13] -1 0 0xfd100000 - 0xfd1003ff (0x400) MX[b]
    [14] -1 0 0xf0000000 - 0xefffffff (0x0) MX[b]O
    [15] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
    [16] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
    [17] -1 0 0xf8000000 - 0xf8ffffff (0x1000000) MX[b](B)
    [18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [22] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [23] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
    [24] -1 0 0x00009000 - 0x0000901f (0x20) IX[b]
    [25] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[b]
    [26] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
    [27] -1 0 0x00001400 - 0x0000141f (0x20) IX[b]
    [28] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
    [29] -1 0 0x0000cc00 - 0x0000cc03 (0x4) IX[b]
    [30] -1 0 0x0000c800 - 0x0000c807 (0x8) IX[b]
    [31] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[b]
    [32] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[b]
    [33] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
    [34] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [35] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [36] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
    [37] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [38] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[b]
    [39] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[b]
    [40] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[b]
    [41] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
    [42] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [43] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) NVIDIA(0): Setting mode "1600x1200"
    (II) Loading extension NV-GLX
    (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
    (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
    (==) NVIDIA(0): Backing store disabled
    (==) NVIDIA(0): Silken mouse enabled
    (**) Option "dpms"
    (**) NVIDIA(0): DPMS enabled
    (II) Loading extension NV-CONTROL
    (==) RandR enabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension XAccessControlExtension
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    (II) Initializing extension GLX
    (**) Option "CoreKeyboard"
    (**) Keyboard1: Core Keyboard
    (**) Option "Protocol" "standard"
    (**) Keyboard1: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard1: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard1: XkbModel: "pc105"
    (**) Option "XkbLayout" "us(alt-intl)"
    (**) Keyboard1: XkbLayout: "us(alt-intl)"
    (**) Option "XkbOptions" "compose:rwin"
    (**) Keyboard1: XkbOptions: "compose:rwin"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard1: CustomKeycodes disabled
    (**) Option "Protocol" "ExplorerPS/2"
    (**) Mouse1: Device: "/dev/input/mice"
    (**) Mouse1: Protocol: "ExplorerPS/2"
    (**) Option "CorePointer"
    (**) Mouse1: Core Pointer
    (**) Option "Device" "/dev/input/mice"
    (==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
    (**) Mouse1: ZAxisMapping: buttons 4 and 5
    (**) Mouse1: Buttons: 9
    (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
    (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
    (II) Mouse1: ps2EnableDataReporting: succeeded
    Could not init font path element unix/:-1, removing from list!
    FreeFontPath: FPE "/usr/share/fonts/misc:unscaled" refcount is 2, should be 1; fixing.
    And here is my Xorg.conf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 1.0 (buildmeister@builder3) Mon Feb 26 23:38:46 PST 2007
    # File generated by XFdrake (rev 57713)
    # Refer to the xorg.conf man page for details about the format of
    # this file.
    Section "ServerLayout"
    Identifier "layout1"
    Screen "screen1" 0 0
    InputDevice "Keyboard1" "CoreKeyboard"
    InputDevice "Mouse1" "CorePointer"
    EndSection
    Section "Files"
    # font server independent of the X server to render fonts.
    # minimal fonts to allow X to run without xfs
    FontPath "unix/:-1"
    FontPath "/usr/share/fonts/misc:unscaled"
    EndSection
    Section "Module"
    Load "dbe" # Double-Buffering Extension
    Load "v4l" # Video for Linux
    Load "extmod"
    Load "type1"
    Load "freetype"
    Load "/usr/lib/xorg/modules/extensions/nvidia/libglx.so" # 3D layer
    Load "glx"
    EndSection
    Section "ServerFlags"
    #DontZap # disable <Crtl><Alt><BS> (server abort)
    # allows the server to start up even if the mouse does not work
    #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
    Option "allowmouseopenfail"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us(alt-intl)"
    Option "XkbOptions" "compose:rwin"
    EndSection
    Section "InputDevice"
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "ExplorerPS/2"
    Option "Device" "/dev/input/mice"
    EndSection
    Section "Monitor"
    # TV fullscreen mode or DVD fullscreen output.
    # 768x576 @ 79 Hz, 50 kHz hsync
    Identifier "monitor1"
    VendorName "CTX"
    ModelName "CTX PR705F series"
    HorizSync 30.0 - 85.0
    VertRefresh 50.0 - 160.0
    ModeLine "768x576" 50.0 768 832 846 1000 576 590 595 630
    ModeLine "768x576" 63.1 768 800 960 1024 576 578 590 616
    EndSection
    Section "Device"
    Identifier "device1"
    Driver "nvidia"
    VendorName "NVIDIA Corp."
    BoardName "NVIDIA GeForce FX (generic)"
    EndSection
    Section "Screen"
    Identifier "screen1"
    Device "device1"
    Monitor "monitor1"
    DefaultDepth 24
    Option "AddARGBGLXVisuals" "True"
    Option "DPMS"
    SubSection "Display"
    Depth 8
    Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite"
    EndSection
    Last edited by flebber (2007-06-20 17:14:12)

    This is my .xinitrc file
    #!/bin/sh
    # ~/.xinitrc
    # Executed by startx (run your window manager from here)
    # exec wmaker
    # exec startkde
    # exec icewm
    # exec blackbox
    # exec fluxbox
    # exec gnome-session
    exec xterm
    I did the startx with xterm installed but still no go #!/bin/sh
    # ~/.xinitrc
    # Executed by startx (run your window manager from here)
    # exec wmaker
    # exec startkde
    # exec icewm
    # exec blackbox
    # exec fluxbox
    exec gnome-session
    I see this error at the end of when X crashes everytime
    Could not init font path element unix/:-1, removing from list!
    FreeFontPath: FPE "/usr/share/fonts/misc:unscaled" refcount is 2, should be 1; fixing.
    and if it helps here is my inittab which I altered for gdm purposes from the wiki advice http://wiki.archlinux.org/index.php/Start_X_at_boot
    # /etc/inittab
    # Runlevels:
    # 0 Halt
    # 1(S) Single-user
    # 2 Not used
    # 3 Multi-user
    # 4 Not used
    # 5 X11
    # 6 Reboot
    id:5:initdefault:
    rc::sysinit:/etc/rc.sysinit
    rs:S1:wait:/etc/rc.single
    rm:2345:wait:/etc/rc.multi
    rh:06:wait:/etc/rc.shutdown
    su:S:wait:/sbin/sulogin -p
    c1:2345:respawn:/sbin/agetty 38400 vc/1 linux
    c2:2345:respawn:/sbin/agetty 38400 vc/2 linux
    c3:2345:respawn:/sbin/agetty 38400 vc/3 linux
    c4:2345:respawn:/sbin/agetty 38400 vc/4 linux
    c5:2345:respawn:/sbin/agetty 38400 vc/5 linux
    c6:2345:respawn:/sbin/agetty 38400 vc/6 linux
    ca::ctrlaltdel:/sbin/shutdown -t3 -r now
    x:5:respawn:/usr/bin/gdm -nodaemon
    # End of file
    Last edited by flebber (2007-06-19 23:05:52)

Maybe you are looking for