WRE54G v3 - I manage to set it up manually but it crashes when I add security

I have attempted to set up the WRE54G via the cd but kept getting the "can not associate AP in repeater mode". I googled it and tried all the solutions suggested with no joy. It doesn't want to use the cd, I did it time after time changing things and nothing worked.
So I decided to set it up manually. I used this link http://www.tomsguide.com/us/how-to,review-308.html to help me. It worked up to stage 9, when I attempted to set up WPA security like my router has. Once I set up the WPA security, I pressed ok on the window that popped up, and everything crashed. The window went to "can not find this page" - I had no confirmation that it had worked. I checked the wireless networks and no security came up on the network for the expander. Also the link LED stayed red on the actual wre54g.
I am a bit of a novice at this kind of thing, but I managed it before with my linksys router, but now I've had to change it nothing works! It is causing me a lot of stress.
My router is 192.168.0.1, its a sky sagem wireless router f@st 2420.
I changed my WAN to 192.168.1.239 in order to see my expander. I then changed my expander to 192.168.0.40 so that my router and computers and expander can talk to each other!!
Please help.
Thanks for looking.

You could have followed that too closely. If your router is 192.168.0.1, you should make the RE 192.168.0.240 (not 192.168.1.240 like in the instructions). You don't need to change the WAN to XXX.XXX.1.XXX.
Edit: OK, I read a little closer and RE IP addy should be OK. Doesn't have to be 240 but make sure it is unique. Also, since you have been changing your router settings, please try a power cycle of the whole network. Bring the router up first, wait for lights to stabilize, RE next, wait for steady blue link and flashing activity, then clients.
Message Edited by Luckydog on 07-05-2008 08:48 AM
Message Edited by Luckydog on 07-05-2008 09:08 AM
Message Edited by Luckydog on 07-05-2008 09:11 AM

Similar Messages

Firefox 3.6.8 crashes when accessing Add-on Manager and Google Toolbar (v 7.1.20100723W) is enabled

Well, as I said, Firefox 3.6.8 crashes when accessing Add-on Manager and Google Toolbar (v 7.1.20100723W) is enabled. This is on a 2010 white unibody macbook. I have a google toolbar, and all of a sudden, it keeps saying that it can't communicate with the toolbar. Now, I can't even uninstall it because whenever I go to the add on manager, it says there's an 'unresponsive script'. Could anyone help me? Thanks.

I fixed it by running in Safe Mode, and uninstalling Personas. Thanks again!

I can't gt out of my att mail! I managed to set up the mail, but now I cannot exit! what do I do to exit att

How do I get out of my att mail? I managed to set up the mail and checked a few messages, but now I can't get back to the main screen! Thanks.

Press the Home button.

How do I set the default page that comes up when I add a new tab (Click on "+" in upper right)?

When I click on "+" in the upper right to open a new page, it is coming up in a commercial site which I do not want. How to fix?

Thanks for the suggestion.
A few weeks ago I downloaded some free software from the "tucows.com" website, it appears to have permanently hijacked my web browsers (both firefox and IE) so all searches go to their "searchqu" site, and new tabs open at that site. I was unable to repair this with the addins you suggested or by editing my user preferences files, and ended up having to reinstall firefox. Hopefully I won't run into the tucows rootkit ;)
But thanks anyway.
-DPT

I am an iPad novice and whilst I have managed to set up my personal email, I have having trouble with my business email in that I can receive emails, but am unable to send and the message says 'this email address has been rejected by server'

I am an iPad novice and whilst I have managed to set up my hotmail account on the iPad - I ham having trouble with my business email (I can receive emails, but cannot send and it says' email rejected by server'

That sounds like a settings issue to me. Check with your IT depatment to make sure you have it configured properly.

How do I uninstall the software from my computer to start the iPhone set up over again, as I have managed to set everything to several different email accounts, and want it all to operate from one?

I Have managed to set my software to different email accounts as I already had an apple acount to one email address because of my iPod, so I set it so my old email which is full of spam, making it impossible to organise. Therefore I created a new email which I can use efficiently, but how do I reset my account on my iPhone and the software on my computer so it can all operate as one? Please HELP!

iPhone User Guide (For iOS 4.2 and 4.3 Software)

I changed internet providers and email accounts. I have managed to set up a new Apple ID but my I-phone is not recognizing it.

I recently changed internet providers and thus had to set up a new email account. I managed to change my Apple ID but my I-phone 4S is not recognizing it. It still brings up the old user ID. I am also unable to retrieve Windows Mail (also wants old info) I synced my phone. What else can I do?

cjm2004 wrote:
.... Do I have to set up a new apple id?
No.
Contact iTunes Customer Service and request assistance with your issue.
Apple Support iTunes Store Contact Us

Just got a new mac pro and can't manage to set a password and keep it. It keeps telling me I have the wrong password.

Just got a new mac pro and can't manage to set a password and keep it. It keeps telling me I have the wrong password. I want to start over and I can't even get back in to do this bc it won't take any of my passwords. How can I start over completely?

You got a new laptop? try asking there or in Lion forum.
If it has Lion, use the Recovery Mode boot Command-R
Use that to erase and reinstall - it has network install ability.
Want MacBook Pro forum or Lion Community?
MacBook Pro
Lion Mac OS X Communities
New, as in from Apple, it would have asked for full setup.
Want to reset the password? (it is used then I'd wipe it clean and start over)
How to run the Password Reset utility in OS X 10.7 Lion

Open item managment is set to B/S accounts

Hi Guru's
I saw open item managment is set to B/S accounts only. Do we set for P&L accounts also? If so examples please.
Regards
Odaiah Pelley

Hi ,
OPEN ITEM MANAGMENT-Items posted to accounts managed on an open item basis are marked as open or cleared. The balance of these accounts is always equal to the balance of the open items.
Example:
A goods receipt/invoice receipt (GR/IR) clearing account should be managed on an open item basis so that you can check at any time whether invoices have been received for the goods received for an order.
Set up accounts without open item management if no offsetting entry is to be made against a posting to this account.
Examples
Accounts that are managed on an open item basis include:
Clearing accounts:
Bank clearing account
Payroll clearing account
Cash discount clearing account
GR/IR clearing account
Accounts that are not managed on an open item basis:
Bank accounts
Tax accounts
Raw material accounts
Reconciliation accounts
These are managed implicitly using the subledger open item function.
Profit and loss accounts
Materials Management (MM) accounts posted with a posting key that has account type 'M'
Hope this will help you
Regards

SCVMM Virtual Switch Provisioning ignores "Inherit settings from the physical management adapter" setting

When provisioning a new Hyper-V hosting into SCVMM I have a situation occur that causes loss of management to the server, which really should not be happening. When I add a new host, I set the 'Virtual Switch' adding a new 'Logical Switch' as well as a 'Virtual
Network Adapter' for the management OS traffic.
The first NIC in the team is active and configured with correct static IP information, which is allowing VMM access to the server to perform these steps. The 'Virtual Network Adapter' has a checkbox in the 'This virtual network adapter inherits settings
from the physical management adapter.' option box.
From my understanding what should happen is when the virtual adapter is created on the host the IP information should move to the virtual adapter from the physical adapter that is now part of the NIC Team. What is actually happening is the NIC Team seems
to create OK, but it picks up a DHCP IP address instead of assuming the first physical NIC's IP information. I tried this with only one NIC as well as both NICs in the team to see what happens. Either case the same problem presents.
To get around this, what I did was sit on the console after I started the provisioning process. As soon as I saw Teamed NIC create I applied the static IP address via PowerShell manually to that Teamed NIC virtual adapter and then VMM just continued along
normally. It then moving the IP from the NIC Team adapter to the Hyper-V virtual adapter properly. I did get a warning back from the creation (below) which hints me to the problem.
The Error code details as 2147942465 which is a "Network Access Denied" code followed by "Error while applying physical adapter network settings to teamed adapter". So, this is telling me there was a permission issue of some sort during
the step of adding the original physical NIC IP settings to the virtual NIC.
The VMM Run As user 'HVAdmin' is a Local Administrator on the Hyper-V host, this has been verified. It has also been temporarily granted Administrator access on the domain to see if it helps. No go.
Searching around the net has now revealed this problem so far, has anyone else seen this? It makes provisioning a bit of a chore because I have to be at the Hyper-V console and on VMM at the exact same time to add a new host.

It's a workaround but this works best.
When initially configuring the host use a dedicated Nic.
Configure the new team with a management Vnic and assign the Vnic an IP.
Now disable the dedicated nic and you can start working the the team and the Vnic.
Gil Gross | Technical Lead | G-Net Network Solutions | www.g-net.co.il | plz visit my blog - gilgrossblog.wordpress.com

No system manager locations set, search application might not be ready yet

Hi,
I am just setting up a new SharePoint 2013 environment (Windows server 2008 R2 + SQL Server 2008 R2) and I am getting this error message in powershell when I try to save my new search topology: No system manager locations set, search application might
not be ready yet. The installation script used to install and create the search service originates from this link: http://www.toddklindt.com/blog/Lists/Posts/Post.aspx?ID=378 and I receive the error message after running $clone.Activate().
ULS is writing this:
05-29-2013 14:57:00.94 mssearch.exe (0x19C0) 0x1A68 SharePoint Server Search Crawler:Content Plugin cd11 Critical Content Plugin can not be initialized - list of CSS addresses is not set.
05-29-2013 14:56:08.27 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration dkd5 High synchronizing search service instance 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:08.27 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration eff0 High synchronizing search data access service instance 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.38 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ajzc7 Medium Cleanup of Orphan Systems in server SR00667 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration agwve Medium Synchronizing legacy admin 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ai4f1 High Unable to get systemmanagerlocation from db 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ai84s Medium Skipping legacy admin sync as there is no system manager location set 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration agwvc Medium Skipping Topology Synchronize.The active topology does not have any Components. 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ajnco Medium Cleaning up Orphan nodes in system : 7B4831 8f28209c-5d35-a0cc-7fad-bd7b088335ee
So basically all else is going fine before saving the clone. Application pool is created, search service and it´s proxy is created (the databases are also created in SQL). The clone is after this created and then the components are added.
I have tested with both March and April CU. I use separate accouns for search service, installation and so on. I have tested giving the search application pool account local admin right but didnt make any difference.
Some posts in Internet around this matter is pointing towards there might be 4 missing patches like here: http://blog.steigis.ch/sharepoint/sps2013/search-in-starting-state/ They are all installed on my server.
Search host controller service and SharePoint Server Search are started.
Before creating the service I ran this. I have done this on all my other installations of search to solve the problem with the host service is in "starting" state. Info taken from here: http://mmman.itgroove.net/2012/12/search-host-controller-service-in-starting-state-sharepoint-2013-8/
$acl = Get-Acl HKLM:\System\CurrentControlSet\Control\ComputerName
$person = [System.Security.Principal.NTAccount] "Users"
$access = [System.Security.AccessControl.RegistryRights]::FullControl
$inheritance = [System.Security.AccessControl.InheritanceFlags] "ContainerInherit, ObjectInherit"
$propagation = [System.Security.AccessControl.PropagationFlags]::None
$type = [System.Security.AccessControl.AccessControlType]::Allow
$rule = New-Object System.Security.AccessControl.RegistryAccessRule($person, $access, $inheritance, $propagation, $type)
$acl.AddAccessRule($rule)
Set-Acl HKLM:\System\CurrentControlSet\Control\ComputerName $acl
$sh = Get-SPServiceInstance | ? {$_.TypeName -eq "Search Host Controller Service"}
After this I do a server restart and continue with creating the search service and its components.
Any ideas?

I had exactly the same issue when setting up a new SharePoint 2013 environment (Windows Server 2012, SP2013 with PU March 2013 and CU April 2013, .NET 4.5). I have tried almost everything during the last weeks to configure the Search Service Applicatione,
e.g. create the service from GUI, create it from PowerShell, verify my search account had enough permissions, check for missing updates etc. etc. Same error no matter what I tried.
Using another SharePoint farm I went through a similar configuration of the Search Service Application. I used exactly the same script as I did on the first server and the setup completed without any issues. So why did the same features fail during the setup?
To find an answer I compared the two farms and the only thing I noticed that were different was the lack of .NET 3.5 on the application and WFE server in the first farm. I then enabled .NET 3.5 features and now the Search Service Application works as expected
I had no idea enabling .NET 3.5 features would solve the issue - I thought .NET 4.5 was backward compatible and SharePoint only requires .NET 4.5 according the
requirements?

Oracle configuration manager proxy setting

Hello,
I m trying to install Agent speratly using this file
"Linux_Grid_Control_agent_download_10_2_0_2_0"
after unzip and using runninstaller......
but durring asking the configuration it ask for the
"oracle configuration manager proxy setting"
even it is opptional and i hav not checked it .... it is not going next.
i dont want to configure it (but when i give values proxy ip and port, not accept it).
plz solve this issue
Thanx.

Whats error it throw on pressing next
please paste the install action log

Talent Management - Objective Setting Aprpoval - One more Level

Hi,
Objective Settings to be approved by both immediate manager and the second higher manager. But, now, only the immediate manager can approve it. I read the doc id Note:550338.1. But, is there any workaround for this? Can we attach custom workflow to this? so that it goes to second higher manager for approval?
Thanks in advance

Hi
We have had this discussion outside the forum, but I have added my comments here in case they are useful to others.
I have read note 550338.1 and I think you would wait a long time for this to be made part of the standard process!
The objectives setting process is either PARALLEL or CASCADING. PARALLEL means that the employee starts the process and the manager has to ‘agree’ the objectives. This agreement is done as a task in the PMP, rather than a response to a notification for approval.
I guess I need to understand WHY you need 2 approvers?
If you use the CASCADING model, then you are cascading objectives down from the top of the organisation and adapting them to lower level conditions. For example, CEO says ‘cut costs by 10%”. This objective might translate to ‘Cut Supplier costs by 10%’ when given as an objective to the Finance Director. He then sets objectives to his subordinates and links them to his own. For example, he sets the Purchasing Manager the objective of “Renegotiate contracts with suppliers”.
When you use cascading, you are implicitly approving the objectives because they are created from the top down.
You asked if you could create a custom workflow to control the second approval. Even if you did this (which I would not recommend), you would have problems with the way that the tasks are sent to and from managers and employees. I don’t think the user interface would support this.
As with all e-Business Suite implementations, the art is to make use of what it does well and not to customise the bits that don’t do what you want! This invariably leads to trouble!
Hope this helps
Regards
Tim

MANAGING APPLICATION SET PROBLEM

Iam Trying to manage application set where iam using BPC EXCEL INTERFACE and there iam trying to choose application set and application. at this point i can see other applications except ex: sales application which was created is not visible to choose.
i have tried refresh client side, and modified and updated application and application set.
still same problem
Please direct me.
Thanks in advance

Hi Guru,
You should give Read & Write access for your Member Access Profile
Go to ur Member access profile -> Modify -> BPC Access -> Give a Read & Write Access
Thanks & Regards,
Ramanathan

I have recently changed by email login password for my emails i have managed to change them in my setting for my iPad but need to change the settings for my MAC computer but i cannot see to do it help please

i have recently changed by email login password for my emails i have managed to change them in my setting for my iPad but need to change the settings for my MAC computer but i cannot seem to do it help please?

Mail/Preferences/Accounts
Use the - and + signs to delete or add your new Accounts
see
http://support.apple.com/kb/PH4928
Mac 101
http://support.apple.com/kb/index?page=search&src=support_site.kbase.search&loca le=en_US&q=deleting%20mail%20accounts

WRE54G v3 - I manage to set it up manually but it crashes when I add security

Similar Messages

Maybe you are looking for