WRH54G linksys setup problem help plz

i just bought the WRH54G linksys wireless-G home router. I put the cd rom in and i followed every step and i have everything in the right place but when it is at step 9 when u have to choose between DHCP, PPPoE, or Static Ip i dont know which one to choose so i go with DHCP then step 10 after i put in the passwords and click next and it is checking internet connection it says the router is not able to connect to the internet. try turning cable/dsl modem off and back on again. do you want to try again?. that is where i get stuck and i have tried to turn it off and back on again and i doesnt work. can anyone help me out?

I HAVE A DSL .. ROUTER PROBLEM
STAYS IN STEP 9 AS WELL ..
checking internet connection it says the router is not able to connect to the internet. try turning cable/dsl modem off and back on again. do you want to try again?
after some research am going to try to put MY MODEM in brigde Mode. maybe that'll fix the problem... Since it apears the linksys WRH54G is trying to connect to the internet DIRECTLY... i dont knoe .... first time newbe , i have a high level of computer experties.. but am having pro with dis NAW 25$ discounted outer.lol
I have DSL from verizon... in there instusction on how to.. the first thing is to put the MODEM that they issued A WESTELL into brigde mode .. and setup..
if anione gat this thing working after u gat this CANT CONECT TO INTERNET
the router is not able to connect to the internet. try turning cable/dsl modem off and back on again. do you want to try again?
please e-mail me with anifinding..
.thanks in advance

Similar Messages

Table Control Text fields problem , help plz

Hello Anand , Rich , John & All
I hav problem with Text 3 fields( type c)(either L or R aligned ) , it is not geting updated , otherwise everything else is perfectly fine(scrolling,sorting etc ....) .
Fields giving problem are
1. Status(20) type c
2. Fdat type date
3. Remark(100) type c
All numerical fields are working fine .
 My yahoo messenger-id is [email protected]
Any light on this will be awarded plz .
FLOW LOGIC
PROCESS BEFORE OUTPUT.
MODULE SET_STATUS.
LOOP AT ITAB
 WITH CONTROL TCL1
 CURSOR TCL1-CURRENT_LINE .
 MODULE SET_LINE_COUNT .
ENDLOOP.
PROCESS AFTER INPUT.
MODULE UPD_OK_COD.
MODULE EXIT_COMAND AT EXIT-COMMAND.
MODULE SCROLL_SORT.
LOOP AT ITAB.
 MODULE UPDATE_ITAB.
ENDLOOP.
MODULE UPDATE_TABLE.
REPORT ZSD_REP_ORDER_BANK_CHANGE NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES: VBAK,VBAP,VBRK,ZSD_TABL_ORDBANK,MARA,KONV.
CONTROLS: TCL1 TYPE TABLEVIEW USING SCREEN 0200.
DATA: ITAB LIKE ZSD_TABL_ORDBANK OCCURS 0 WITH HEADER LINE,
 WA_ITAB LIKE ZSD_TABL_ORDBANK,
 OK_CODE LIKE SY-UCOMM,
 SAVE_OK_CODE LIKE SY-UCOMM,
 UPD_OK_CODE LIKE SY-UCOMM,
 ANSWER TYPE C,
 I LIKE SY-LOOPC ,
 J LIKE SY-LOOPC,
 V_LINES LIKE SY-LOOPC,
 LINE_COUNT LIKE SY-LOOPC,
 STS TYPE N,
 EMGRP LIKE MARA-EXTWG,
 QTY LIKE ZSD_TABL_ORDBANK-QTY,
 UPRICE LIKE ZSD_TABL_ORDBANK-UPRICE,
 TOT LIKE ZSD_TABL_ORDBANK-TOT,
 INO LIKE VBAP-POSNR,
 COL TYPE CXTAB_COLUMN,
 COPIED_ONCE ,
 FLDNAME(100),HELP(100).
FIELD-SYMBOLS:
 <FS_ITAB> LIKE LINE OF ITAB,
 <FS_TCL1> LIKE LINE OF TCL1-COLS.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS: S_CCODE FOR ZSD_TABL_ORDBANK-CCODE
 NO INTERVALS NO-EXTENSION OBLIGATORY,
 S_SORG FOR ZSD_TABL_ORDBANK-SORG
 NO INTERVALS NO-EXTENSION OBLIGATORY,
 S_DCHAN FOR ZSD_TABL_ORDBANK-DISTCHAN,
 S_DIV FOR ZSD_TABL_ORDBANK-DIV,
 S_MATNO FOR ZSD_TABL_ORDBANK-MATNO,
 S_CUSTNO FOR ZSD_TABL_ORDBANK-CUSTNO ,
 S_QTNO FOR ZSD_TABL_ORDBANK-QTNO,
 S_QTDAT FOR ZSD_TABL_ORDBANK-QTDAT,
 S_QTVDAT FOR ZSD_TABL_ORDBANK-QTVALDAT,
 S_SONO FOR ZSD_TABL_ORDBANK-SONO.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN.
 SELECT * FROM ZSD_TABL_ORDBANK
 INTO TABLE ITAB
 WHERE CCODE IN S_CCODE
 AND SORG IN S_SORG
 AND DISTCHAN IN S_DCHAN
 AND DIV IN S_DIV
 AND MATNO IN S_MATNO
 AND CUSTNO IN S_CUSTNO
 AND QTNO IN S_QTNO
 AND QTDAT IN S_QTDAT
 AND QTVALDAT IN S_QTVDAT
 AND SONO IN S_SONO .
 IF SY-SUBRC EQ 0.
 REFRESH ITAB.
 CLEAR COPIED_ONCE.
 CALL SCREEN 0200.
 ELSE.
 MESSAGE E012(ZQOTBANK) .
 ENDIF.
*& Module SET_STATUS OUTPUT
* text
MODULE SET_STATUS OUTPUT.
SET PF-STATUS '0200'.
SET TITLEBAR '0200'.
 IF COPIED_ONCE IS INITIAL.
 SELECT * FROM ZSD_TABL_ORDBANK
 INTO TABLE ITAB
 WHERE CCODE IN S_CCODE
 AND SORG IN S_SORG
 AND DISTCHAN IN S_DCHAN
 AND DIV IN S_DIV
 AND MATNO IN S_MATNO
 AND CUSTNO IN S_CUSTNO
 AND QTNO IN S_QTNO
 AND QTDAT IN S_QTDAT
 AND QTVALDAT IN S_QTVDAT
 AND SONO IN S_SONO .
 IF SY-SUBRC EQ 0.
 DESCRIBE TABLE ITAB LINES V_LINES.
 TCL1-LINES = V_LINES.
 ENDIF.
 COPIED_ONCE = 'X'.
 REFRESH CONTROL 'TCL1' FROM SCREEN '0200'.
 ENDIF.
 LOOP AT ITAB.
 QTY = ITAB-QTY.
 UPRICE = ITAB-UPRICE.
 TOT = QTY * UPRICE .
 ITAB-TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-CGL_QTY.
 UPRICE = ITAB-CGL_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-CGL_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-BHEL_QTY.
 UPRICE = ITAB-BHEL_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-BHEL_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-ALSTOM_QTY.
 UPRICE = ITAB-ALSTOM_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-ALSTOM_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-SIEMENS_QTY.
 UPRICE = ITAB-SIEMENS_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-SIEMENS_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-TELK_QTY.
 UPRICE = ITAB-TELK_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-TELK_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-OTH_QTY.
 UPRICE = ITAB-OTH_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-OTH_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 MODIFY ITAB.
 ENDLOOP.
ENDMODULE. " SET_STATUS OUTPUT
*& Module SET_LINE_COUNT INPUT
* text
MODULE SET_LINE_COUNT OUTPUT.
LINE_COUNT = SY-LOOPC.
ENDMODULE. " SET_LINE_COUNT INPUT
*& Module UPD_OK_CODE INPUT
* text
MODULE UPD_OK_COD INPUT.
IF OK_CODE = 'SAVE'.
 UPD_OK_CODE = OK_CODE.
* CLEAR OK_CODE.
ENDIF.
ENDMODULE. " UPD_OK_CODE INPUT
*& Module EXIT_COMAND INPUT
* text
MODULE EXIT_COMAND INPUT.
SAVE_OK_CODE = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK_CODE.
 WHEN 'BACK'.
 CALL FUNCTION 'POPUP_TO_CONFIRM'
 EXPORTING
 TITLEBAR = 'Order Bank Entry'
 TEXT_QUESTION = 'Do you want to Go BacK ?'
 TEXT_BUTTON_1 = 'Yes'
 TEXT_BUTTON_2 = 'No'
 DEFAULT_BUTTON = '2'
 IMPORTING
 ANSWER = ANSWER.
 IF ANSWER = '1'.
 LEAVE TO SCREEN 0.
 ELSE.
 ENDIF.
 WHEN '%EX'.
 CALL FUNCTION 'POPUP_TO_CONFIRM'
 EXPORTING
 TITLEBAR = 'Order Bank Entry'
 TEXT_QUESTION = 'Do you want to Exit ?'
 TEXT_BUTTON_1 = 'Yes'
 TEXT_BUTTON_2 = 'No'
 DEFAULT_BUTTON = '2'
 IMPORTING
 ANSWER = ANSWER.
 IF ANSWER = '1'.
 LEAVE TO SCREEN 0.
 ELSE.
 ENDIF.
ENDCASE.
ENDMODULE. " EXIT_COMAND INPUT
*& Module UPDATE_MOD INPUT
* text
MODULE UPDATE_ITAB INPUT.
 MODIFY TABLE ITAB FROM ITAB.
ENDMODULE. " UPDATE_MOD INPUT
*& Module SCROLL INPUT
* text
MODULE SCROLL_SORT INPUT.
SAVE_OK_CODE = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK_CODE.
WHEN 'P--'.
 TCL1-TOP_LINE = 1.
WHEN 'P-'.
 TCL1-TOP_LINE = TCL1-TOP_LINE - LINE_COUNT.
 IF TCL1-TOP_LINE LE 0.
 TCL1-TOP_LINE = 1.
 ENDIF.
WHEN 'P+'.
 I = TCL1-TOP_LINE + LINE_COUNT.
 J = TCL1-LINES - LINE_COUNT + 1.
 IF J LE 0.
 J = 1.
 ENDIF.
 IF I LE J.
 TCL1-TOP_LINE = I.
 ELSE.
 TCL1-TOP_LINE = J.
 ENDIF.
WHEN 'P++'.
 TCL1-TOP_LINE = TCL1-LINES - LINE_COUNT + 1.
 IF TCL1-TOP_LINE LE 0.
 TCL1-TOP_LINE = 1.
 ENDIF.
WHEN 'SORTUP'.
 READ TABLE TCL1-COLS ASSIGNING <FS_TCL1> WITH KEY SELECTED = 'X'.
 IF SY-SUBRC = 0.
 SPLIT <FS_TCL1>-SCREEN-NAME AT '-' INTO HELP FLDNAME.
 SORT ITAB ASCENDING BY (FLDNAME).
 ENDIF.
WHEN 'SORTDN'.
 READ TABLE TCL1-COLS ASSIGNING <FS_TCL1> WITH KEY SELECTED = 'X'.
 IF SY-SUBRC = 0.
 SPLIT <FS_TCL1>-SCREEN-NAME AT '-' INTO HELP FLDNAME.
 SORT ITAB DESCENDING BY (FLDNAME).
 ENDIF.
ENDCASE.
ENDMODULE. " USER_COMMAND INPUT
*& Module TABL_UPD INPUT
* text
MODULE UPDATE_TABLE INPUT.
 CASE UPD_OK_CODE.
 WHEN 'SAVE'.
 UPDATE ZSD_TABL_ORDBANK FROM TABLE ITAB .
 IF SY-SUBRC EQ 0.
 MESSAGE I002(ZQOTBANK) .
 CLEAR UPD_OK_CODE.
 ELSE.
 MESSAGE E003(ZQOTBANK) .
 ENDIF.
 ENDCASE.
ENDMODULE. " TABL_UPD INPUT
Thnx
moni
Message was edited by: md monirujjaman
Message was edited by: md monirujjaman

Hi Moni,
The problem as I had replied in your earlier post is with the MODIFY statement.
MODIFY TABLE ITAB FROM ITAB. This statement will do the modifications based on the table key. When you have character fields as editable, then some problems are to be anticipated. In such a scenario, you must update the internal table based on the index, rather than based on key.
So consider using
MODIFY ITAB FROM ITAB INDEX TCL-CURRENT_LINE.
Where TCL is the name of the Table Control. Also observe the difference in syntax here, don't use the TABLE keyword for the MODIFY statement.
Please try it out and let me know.
Regards,
Anand Mandalika.

Nokia 5220 WHITE SCREEN PROBLEM *Help plz*

hello guys ... my phone's (5220) screen has gone White ... !! i have absolutely no idea what the problem is ! i took out the battery and put it back again .. but when i turn it on ..after the nokia logo the screen goes white again !! i cant do anything except for looking at the white screen...! the phone doesnt even turn off until you take out the battery !
I tried to connect it to my PC (via data cable) but the phone does not get connected with the PC suite !! PLZ HELP ME !!

Jimmyireland is right - anything that you could do yourself requires the phone to at least boot up properly, at the moment your phone is like PC with no Windows involved, it can't find its OS to start.
The 5220 is a series 40 phone, there is facility for a forced reboot, it needs its software to be reflashed which is why you need the Nokia service point.

Annoying iphone problems, help plz?

well, I'm having two annoying problems with my iphone, the first is that when I record a video or a photo, it does not save and the second is that it does not appear as a removable drive on the pc, SOMEBODY HELP ME PLZ :/

You should try to restore the iPhone using iTunes make sure you back up, see if it helps.
iPhones won't show as removable device if you are referring to be able to copy/transfer files similar to a usb flash drive. It is restricted based on Apple's specification altho it should appear as "Digital Camera Device" having access to your captured photo's or "camera roll" you should unlock your iPhone first before connecting to PC or Mac if you do have a password.
As of saving issues, try to restore the firmware by itunes or resetting through iPhone settings as reset or restore.
It should fix and work as normal, if it doesnt you can always go back from where you purchased it but it will. Goodluck.

Green - Home Lab Setup problem - Help Appreciated

Below you will find my config for a 2520 Router and an AS2509-RJ. I am attempting to reverse telnet from my AS to 2520. However when I try this I end up telnetting back to the AS. (Very confusing, but confirmed as the only password accepted is test1.)
From my AS I am entering:
Telnet R1 2001
Note: Setup is as follows.
AS(RJ45-1) via Rolled cable to 2520 (console port)
Can someone help me out?
R1_2520 Config:
Current configuration : 760 bytes
version 12.1
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname R1_2520
enable secret xxx
enable password xxx
ip subnet-zero
ip tftp source-interface Ethernet0
interface Loopback0
ip address 169.1.x.x.255.255.255
interface Ethernet0
ip address 10.1.1.1 255.255.0.0
interface Serial0
no ip address
no ip mroute-cache
shutdown
interface Serial1
no ip address
shutdown
interface Serial2
no ip address
shutdown
interface Serial3
no ip address
shutdown
interface BRI0
no ip address
shutdown
ip classless
no ip httpserver
line con 0
line aux 0
line vty 0 4
password xxx
login
end
R0_2509 Config:
Current configuration : 976 bytes
version 12.1
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname R0_2509
enable secret xxx
enable password xxx
ip subnet-zero
no ip domain-lookup
ip host R1 2001 10.101.1.1
interface Loopback0
ip address 10.101.1.1 255.255.255.255
interface Ethernet0
ip address 10.10.10.10 255.255.0.0
no ip mroute-cache
shutdown
no cdp enable
interface Serial0
no ip address
no ip mroute-cache
shutdown
interface Group-Async0
ip unnumbered Ethernet0
async mode interactive
group-range 1 8
ip classless
ip httpserver
dialer-list 1 protocol ip permit
dialer-list 1 protocol ipx permit
no cdp run
line con 0
password test1
login
no exec
transport preferred telnet
line 1 8
password test1
login
no exec
transport preferred telnet
line aux 0
line vty 0 4
password lions
login
no exec
transport preferred telnet
end
Debug Info from Telnet:
4d20h: TCB001E7458 created
4d20h: TCB001E7458 setting property TCP_TOS (11) 273F4F
4d20h: TCB001E7458 bound to UNKNOWN.11073
4d20h: TCP: sending SYN, seq 541398595, ack 0
4d20h: TCP0: Connection to 10.101.1.1:2001, advertising MSS 1474
4d20h: tcp0: O CLOSED 10.101.1.1:2001 10.101.1.1:11073 seq 541398595
OPTS 4 SYN WIN 4128
4d20h: IP: s=10.101.1.1 (local), d=10.101.1.1 (Loopback0), len 44, sending
4d20h: TCP0: state was CLOSED -> SYNSENT [11073 -> 10.101.1.1(2001)]
4d20h: IP: s=10.101.1.1 (Loopback0), d=10.101.1.1 (Loopback0), len 44, rcvd 3
4d20h: tcp0: I LISTEN 10.101.1.1:11073 10.101.1.1:2001 seq 541398595
OPTS 4 SYN WIN 4128
4d20h: TCP: connection attempt to port 2001
4d20h: TCP: sending RST, seq 0, ack 541398596
4d20h: TCP: sent RST to 10.101.1.1:11073 from 10.101.1.1:2001
4d20h: IP: s=10.101.1.1 (local), d=10.101.1.1 (Loopback0), len 40, sending
4d20h: IP: s=10.101.1.1 (Loopback0), d=10.101.1.1 (Loopback0), len 40, rcvd 3
4d20h: tcp0: I SYNSENT 10.101.1.1:2001 10.101.1.1:11073 seq 0
ACK 541398596 RST WIN 0
4d20h: TCP0: state was SYNSENT -> CLOSED [11073 -> 10.101.1.1(2001)]
4d20h: TCP0: bad seg from 10.101.1.1 -- closing connection: seq 0 ack 541398596 rcvnxt 0 rcvwnd 0
4d20h: TCP0: connection closed - remote sent RST
4d20h: TCB 0x1E7458 destroyed

So, now we're sure the connection is broken. Let's analyze the problem this way.
There are 3 components in this connection:
1.The 2520's console port
2.rollover cable
3.The 2509's line ports
If one of the above components have any problem, it will cause a broken connection.
First let's check the 2520's console port. Can you login to the 2520 by directly conecting the console port to your PC? If so, this can be excluded from being a probable cause.
Second, change the rollover cable. Is it improved then? If so, the rollover cable you were using is bad. If not, the rollover cable can be likely excluded from being the probable cause.(One possibility is that all the rollver you have are bad, but not likely)
Third, plug your rollover cable to line 2, then type "telnet 10.101.1.1 2002", and see whether you can login to the 2520. If not, repeat the process on line 3, line4 ,...,and line 8.
If all the 8 lines cannot be used, there is the last chance. Remember your aux port? It's your line 9. Before repeat the above process, add some command lines in your confiuration:
line aux 0
no exec
transport preffered telnet
then type "telnet 10.101.1.1 2009
Good lucks
SSLIN
(I have had the same problem before; it's just the cable problem)

Annoying podcast problem help plz

hi guys,
first if this is in the wrong place, i apologise, as you can see a new user.
anyway, heres my problem,
i just got hold of an ipod mini, and i use my itunes extensively for podcast listening,and i have a problem regarding when it comes to syncing them with my ipod.
basically i would like my ipod to put any podcast that is listed as new in itunes on my ipod when i connect it.
and yes it does that fine.
but what problem i have is, when i come to syncing again, it will get the new ones ok, but it will remove all the ones previously put on there, and its annoying, as there are some i have not listened to yet.
is there a setting were i can get my ipod/itunes to put all new podcasts on automatically, but leave them on until i decide to remove them.
i have tried all the settings in the ipod/podcast settings, but none do that.
so any help guys appreciated.
is there a way to get my new podcasts on my ipod, but leave the others on.(and then what would be the easiest way to remove them when i do want them off??)

You should try to restore the iPhone using iTunes make sure you back up, see if it helps.
iPhones won't show as removable device if you are referring to be able to copy/transfer files similar to a usb flash drive. It is restricted based on Apple's specification altho it should appear as "Digital Camera Device" having access to your captured photo's or "camera roll" you should unlock your iPhone first before connecting to PC or Mac if you do have a password.
As of saving issues, try to restore the firmware by itunes or resetting through iPhone settings as reset or restore.
It should fix and work as normal, if it doesnt you can always go back from where you purchased it but it will. Goodluck.

Displaying problem Help Plz !!!

Hi all
For some reason i cant seem to get any applets to run on my computer, they just wont show up, if any one could help, sorry now if i am in the wrong room for this
Thanks

Go tp this Sun website http://java.com and click on Verify Installation. If it does not verify that Java is installed, try clicking on the install arrow, and start an install. If you have any problems, review the help pages there.

MSI Neo2-FR Raid problems help plz

ok well me and msi are not getting along...well i'm tring to install a raid-0 ...in the bios i changed it to boot raid instead of ide....then i went and made a raid 0 array...well i go to try to install windows and i press f6...then when its time to install the drivers from the floppy, it dont see the dam drivers on the floppy so i can get no further...and its weird because from the time i boot up the comp the floppy light stays lit the whole time whether there is a floppy in or not...it did not do that on my other motherboard...msi is a weird board...im ready to break it....can anyone help here

If you can't get your floppy drive/disk to work properly with Windows Setup, you can integrate the ICH9R RAID drivers into a self-made install CD using NLITE or XP ISO BUILDER. Both tools are easy to use and the procedure shouldn't take longer than 15-20 Minutes.

External SCSI HD setup problems - HELP

Hello out there in cyberland (especially T.B) --
I have had GREAT success in the past getting help on this forum (i.e. T.B.).
I have installed an Adeptec Ultra PowerDomain 2930 SCSI controller card in a PCI slot in a G4 MDD computer running OS X 10.4.11.
The controller card was purchased new and contained a CD that was supposed to assist in getting the external HD "up and running."
Even though Adaptec says this particular card and software will run on this computer and the OS contains an extension (Adeptec 290x-2930.kext) for the controller I have been unsuccessful in getting the HD operational.
The Adaptec card shows up in the System Profiler but the HD does NOT show up anywhere. I think (?) the HD should show up in the Parallel SCSI portion of the System Profiler. I turn on the HD BEFORE starting the computer and have checked the HD SCSI termination and cable setup. I have the HD SCSI ID# set to 0.
The SCSIProbe (v. 5.1.1) and PowerDomain Control (v. 5.0) located on the packaged CD both open a window stating they will not work with "Classic."
I have downloaded SCSIProbe v. 5.2 from the Adaptec site and it opens the same window. There is mention of a SCSIProbe v. 5.1.2 in the Adaptec help discussions but I was unable to find it on their site to download it.
Adaptec would not answer my written (email) calls for help or even whether or not the card will work under OS X. However, their specifications state the system will work as I have it configured.
I would appreciate any help that you folks are willing to provide.
T.O.M

Hi,
The Adaptec software you mention is only for OS8.6-9.2, not for OSX. Do you have Jaguar or Panther also installed on the same machine? If so, if you boot into Jaguar, do you see the HD in Apple System Profiler? Have you tried setting the HD SCSI id to something other than 0?
I recently had a similar issue w/an Adaptec 29160 and an HP tape drive. Everything worked fine in Jaguar. The Adaptec card not only showed up in Apple System Profile (ASP) in Jaguar (10.2.8), but the specific version of the firmware and driver were reported correctly. The same card in Panther (10.3.9) also showed up in ASP, but the firmware and driver version nos. were not reported correctly, but rather just binary addresses were displayed. Under Tiger the same card also only showed these binary addresses in ASP for the Adaptec card's firmware and driver version nos. The backup software did not work though under Tiger. I had to swap the Adaptec card for an ATTO SCSI card. Then the backup to the HP tape drive worked again.
I'd look to see if the SCSI HD you have has drivers specifically written for Tiger and see if installing them will result in the HD being detected.
Good luck!
Ed

IPod Problems help PLZ

i have a 80gb classic and it just stopped working all of a sudden. When i turn it on all it does is go to the apple logo and turn off. When i try to connect it to my computer it doesnt reconize it. what should i do.
Please help

Hello OZ1989,
And welcome to Apple Discussions!
With the iPod hooked up, I would try putting the iPod into [Disk Mode|http://support.apple.com/kb/HT1363] to help the iPod stay powered on and mounted in Windows "My Computer" as an external drive. If you are able to get it to stay mounted, I would attempt to reformat the iPod using the tools provided by Windows, and then [Restoring|http://support.apple.com/kb/HT1339] the iPod via iTunes.
Here are instructions on how to reformat your iPod.
http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
Hope this helps.
B-rock

Dv6 pavilion hardware problem HELP PLZ

My hard drive makes a clicking noise. I know its wrecked but i want to know where i can get a new hardrive that fits my laptop. Please help

You will need to call AppleCare and talk to a Customer Service representative. This is a user-to-user forum, and we cannot help you with this issue.

Big problems help plz

Since upgrading to a MSI K8N Neo Platinum nForce3 250 (Socket 754) and a A64 3000..the rest of my system is in sig
i didnt think it was running that fast..and when i did a benchmark with 3d mark 01 it showed up with 17700...and that was with the gfx card overclcoked
i tried messing about with memory timings and overclocking the rig a bit but was still far from impressed....anyway
i bought a new heatsink/fan and a raptor grive to use for my O/S after i had put it all together and switched on the comp it just didnt boot ....all i got was one longish beep the a pause followed by another and so on .
i tried reseating the cpu and heatsink tried the memory in different slots checked gfx card etc still nothing...
anyway i went back to my n/force 2 and barton 2500@3200 with the same memory and gfx card i used on the A64 and it works fine....i benchmarked it with 3d mark 01 and got a score of about 16700...without the gfx card overclocked.....
so have i got a borked mobo or borked chip the new system should be a lot faster than a barton 2500..can anyone tell me what the beep means off this mobo....
cheers in advance for any replies Bram

You can find BIOS beep codes at: http://bioscentral.com/beepcodes/awardbeep.htm
It's not clear to me whether any of those apply to you...are you having a repeating long beep or is it long then short?
Does your CPU fan appear to be running at its full speed? Did you make sure to clean off the old thermal compound fully? Is the new thermal compound applied properly? (don't use too much!)
Have you tried clearing the CMOS? Unplug, and remove the battery for a minute or two. Try also to startup with nothing connected but the CPU, graphics card, and 1 stick of RAM. Before anyone else says it, as it seems to be the answer to end all answers for any problems in this forum, what is your power supply rated at? Not just watts but each rail...for example my PSU: 3.3v 30A 5v 38a 12V1 18A 12v2 15A
Finally, you're not going to see much of an increase in 3dMark tests just because you're on a faster CPU. It's almost completely based off your graphics card. I have a 9800PRO that tests at about 2% faster going from 200mhz to 220mhz for example on my A64 3200+.
Just some general ideas to try based on my recent experiences...in the last month or so I've built 3 PCs, 2 for relatives and 1 for myself. I think about every problem you can have I encountered but it was a great learning experience and a lot of fun!

IPad & iTunes problem, help plz?

when I connect my iPad 2 to itunes, there are no screens showing in the apps section

I suspect you may be using an old version of iTunes. Check to be sure you are running the most recent version. Update if necessary and try again.

Syncing problem help plz....

i keep getting the "disc cannot be read from or written to" message and its really annoying i cant sync any videos

I did it
1st got my ipod reset completely (took 2 hrs)
Then Uninstalled previous version of itunes, installed new one
After dat updated my touch
Now its working

Iphone 4 hotmail imap account getting problems! plz help

iphone 4 hotmail imap account getting problems! plz help

when i am creating IMAP hotmail account with no limits email option on iphone 4 IOS 6.1.3,, it can not sync recent five months email and old emails. It is only syncing the middle ones

WRH54G linksys setup problem help plz

Similar Messages

Maybe you are looking for