Write a text in the box

In my sapscript form, which have a three box. Now, i would like write a page no in one of box of bottom right corner, how can i do that. Thanks

hi portfoilo,
good question...
since u have 3 boxes...to display the page number in 3rd box u just need to shift that particular variable from left side where the horizontal line of 3rd box is defined...
thats all....
hope this would help u out..
please reward points in case usefull...
regards,
Prashant

Similar Messages

How do I write a text below the Lower Third line, in Adobe Premiere Elements 12?

How do I write a text below the Lower Third line, in Adobe Premiere Elements 12?

Ruth Schreiber
To what Premiere Elements 12 title template (lower 3rd type) are you referring?
It is not clear what you want to do.
a. Are you able to double click the template to open it in the program's Titler?
b. Can you select the present text with the Selection Tool to move it to custom locations?
c. Can you edit the existing text in the template?
The following uses the Aquarium lower 3rd template...where do you want to write text in the template?
We will be looking forward to your follow up.
Thanks.
ATR

NTFS Confusion - my new macbook reads and writes fine out of the box

I just purchased my first Mac and was a bit worried about having to format all my external drives to FAT32 or use a third party program. However, after copying all my backup files from my external, I then discovered that I was also able to drag and drop files back onto the drive just fine.
Is this a new function built into recent Macs or what? The drive says its NTFS and even says on the box to reformat to work with Mac.
Anyone else experience this?

black562 wrote:
Well this is interesting. I got home and decided to look at the drive properties and, even though it says NTFS on the box, its actually FAT32....so that answers alot of questions.
I guess the good news is that I don't have to change it now....its nice when problems work themselves.
Unless you want to use it with Time Machine (either as a source or destination), or put any files larger than 4 GB on it.

Need to post text without the box

When I post text, it also posts my text box. I want to just post the characters on top of the movie. Suggestions? Tnx

You can copy music and itunes library to computer is there's enough hard disk space on new computer.
If you don't have iTunes installed on new computer, simply connect iPod to computer, copy the 'iPod_Control' folder to computer, all music store in that folder, then install iTunes and drag all music to iTunes and sync.
There's a lot of software do this job. What I'm using on Windows is ipod copy expert

Centralise text in the Box

Hi Sir/Mdm,
I humbly seek help and tips to centralise a word in a box. Whenever I drag the Text Box, the first character is always starts from the left and it is not in the middle of the Text Box. Any help is greatly appreciated. Thanks

The way tis is usually done is to add a new fill and
drag it below the characters in the Appearance Panel
then select the new fill in the appearance panel and go to Effects>Convert to Shape>Rectangle (or Rounded Rectangle or Ellipse)
and you get this
it is actually better to use point text with soft returns instead of a frame so that as you edit the text the rectangle
will resize automatically.
If you us a text frame you need to manually resize the text frame first before you add text or after you delete text.
Here it is with point text
Here it is with added text and point text
And as i continue to type it resizes
you can also constrain the width so that you manually adjust the breaks according to a specified dimension for the rectangles width.
You just change the line breaks
Edit ignore what I wrote here before the height does not adjust but it remains centered until you run out of room

How can you get the text and the box to resize responsibly in Adobe Edge?

Help please.
Thank you

Hi, shotdang-
You can use the responsive settings on a text field like you can any div. Check out the "Resize" lesson to get more information on how to do this. You can change the size of your text div, as well as set the font size to %.
Hope that helps,
-Elaine

When i use the text tool the text inside the box is very small almost invisible even when i keep the text size to 72 please help

I Have the PS CC 2014 installed in my Win7. I have a problem with the TEXT TOOL,when I select the tool and type something in there,the text is very tiny eventhough the size is 72. I have tried all the things,like Preferences changing,tool reset,character resets etc., Please help me its very frustrating!

Do you see this behaviour on a new Photoshop document?
Try creating a New document:
File > New.
From the Preset menu, choose U.S. Paper (just so we can test what's happening).
Take note of the Width, Height and Resolution of the document you are creating.
Select the Type tool, and ensure the font size is set in pt (points), set to 72 pt.
Click anywhere in the canvas, and start typing.
Do you still see the problem? If it's disappeared, then check the problem document settings:
Image > Image Size, what's the resolution and physical width and height of the file?
Hopefully this will help you discover what's happening to your document.
Cari

In iWork Pages 5.1, how do I eliminate "text" in the Text Box?

In iWork Pages 5.1, how do I eliminate the word "text" which appears in the Text Box, when I've used a color filler and no words?

Select the text and delete.
If you don't want text in the box, don't use a text box ie in Shapes there are various shapes. Select one without 'T'.

I have a ipad2 however I need some help on cutting out some text. I can create the box but I don't see any delete text.

Can some help me I'm look for the delete text on the box but don't see it. Are my settting wrong ?????

This box? If so - follow Ralph's instructions - tap - Cut.

Printing a .pdf with "boxed" sections appearing as "white" and showing a "white" border to the "box"

Dear Community,
I have created a .pdf file from an email and then "boxed" sections of the document with a white border and a white fill, intending the recipient to be unable to see the text within the "box". However, when I print the document it appears as if the "boxed" sections did not exist. In other words, all the text in the email is printed. Can anyone help with a solution, please.

You cannot create pdf files or forms in Adobe Reader. If you used Acrobat, please repost in that forum.

How do I import text into the Keynote Titile

I am trying to use the Keynote title in FCPX - I have "imported" the title over the picture image clip that I want to use, and that works fine, but I am having extreme difficulty in changing the text in the boxes that appear from ex TITILE to what text I want to appear. I click on the box and maybe the text appears in the Inspector and I can change it, then move to the next box - even with the Select tool in action, I clcik away at this next box and it will not select it, so cannot change the text from say INTRODUCTION to what I want.
Can anyone help me out on this - otherweise I shall abandon this title and try a different one.
Thanks

*** I GOT IT!!!!! ***
I was getting really frustrated being the only one who COULDN'T figure this out... I GOT IT!!!
1. Drag the Title to your Editor
2. Place your playhead cursor over the middle-ish area of the title.
3. With the title selected, Double-Click anywhere on your preview, that will select your dropzone and give you a white-glove cursor.
4. Slide the dropzone to the opposite side of your text. (don't worry, just put it back later)
5. Click off of selected title in timeline (click in the background or another clip)
6. Re-select your title clip.
7. Now Double-Click the text you want to edit.
8. When you're finished just double-click on the dropzone area again to "white-glove" it back!
I never really contribute to message threads so, I guess it's about time I start eh?
-David Tandy

Creating a nice text in the custom oaframework page.

Hi,
I was trying to write some text in the page. The text is in different paragraphs, different fonts and has headings and underlines. So in a page, i tried using different items, regions but couldn't accomplish my requirement.
What is the best approach of doing this?
Thanks in advance.
PK

Typically, text font is written per Oracle Standard. They call it the Standard Look and Feel for OAF. You could probably go into your UIX page and make manual updates to the XML code. Give it a try and let me know how it works.
-Scott

How to insert text in smartform boxes

Hi Friends,
This is regarding about smartform box.
I have created one template. pls find below for complete template for your ref.
Total template has 5 lines names like C1, C2, C3, C4, C5, C6 and C7.
To fulfill client req, again I have devided First line "C1" and Second line "C2" into 5 boxes.
       Third line -- no boxes.
      Fourth line -- 3 boxes
      Fifth    line -- 3 boxes
      Sixth   line -- no boxes
      Seventh line -- no boxes
Now I want to assign text for each boxes in the C1 and C2 lines.
In C1 line
first box-- po date
second box - text
like that I have to pass the text in the corresponding boxes.
I don't find any option in the right click.
I am new to the smartforms.
Could you pls help me is there any way to insert text in the boxes.
This is very urgent.
Thanks in advance.

Hi,
Create the text editors as many as you want , these should be assigned to each box in template,
When u double click on text on the right side uder the template window
1-Output option tab-->at the bottom , you can see output structure, there you need to specify the line number and column number.
Ex:
template have 2 rows and 2 columns each row
text1 --- row =1 column =1
text2---- row =1 column =2
text3--- row =2 column =1
text4---- row =2 column =2
Reward if useful,
Thanks,
Aditya

I have made a book of my I Photo pictures. In certain layouts there is a textframe. How can I avoid the frame becoming visible in the print if I don't want to write anything? Should I just leave it or should I delete the text "Write your text here" ?

I have made a book of my iPhoto pictures. In certain layouts there is a text frame. How can I avoid the frame becoming visible in the print if I don't want to write anything? Should I just leave it untouched or should I delete the instructing text "Write your text here"?

Most pages have layouts for pictures only or pictures with text boxes. Either select the same layout for that page but the one without the text box or put a space in the text box.
Putting a space in the text box will avoid getting the warning when ordering that there's an unfilled text box in the book. The box will not be visible in the final product. You can and should check the book before ordering by previewing it as described in this Apple document: iPhoto '11: Preview a book, card, or calendar before you order or print it
Happy Holidays

Why can't I create a document in my Facebook group on my iPad? It won't let me input any text into the text box field after I create a new document. Thanks.

Why can't I create a document in my Facebook group on my iPad. It won't let me input any text into the text box field after I create a new document. Thanks.

Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV).

Write a text in the box

Similar Messages

Maybe you are looking for