Write access not allowed, trying to copy a cd to ipod
I bought a CD and it will not let me put it on my iPod. It says i do not have write access to the iPod. Thanks for any help.
From what I understand the sync was not a issue untill the last 7 or 10 days. Something new on itunes? I really do not know. She has her password and user words but said she never saw the "write" thing before.
I tried to copy a screen of the pop up but it did not work. The screen said something like "dans ipod can not ----------- you do not have write access.
I am clueless.
Dan.........
Similar Messages
-
BB Pearl 8130 "access not allowed!" when trying to download Blackberry App World
Hi, well I am trying to download blackberry app world onto my blackberry pearl 8130 and whenever I try to download it it goes through the language prompts but then goes to a page with "access not allowed" My device software is v4.5, I am currently in Canada, I have the data plan, I can use the internet browser and my carrier is Telus. All help is appreciated, please and thank you!
Hi and Welcome to the Forums!
"Access Not Allowed"? Is that the precise and exact message? If not, please do provide the precise message.
Please check this page to ensure you meet the minimum requirements (including if it is available in your country):
http://na.blackberry.com/eng/services/appworld/download.jsp
If it is available in your country and you feel you meet the device-level system requirements, then contact your carrier to ensure that you meet the service plan (from them) requirements for access (via their network) to AppWorld. Generic data plans, even unlimited, are usually not sufficient...a specific BB data plan is normally required.
Lastly, do be aware that AppWorld is merely a portal, vending apps developed mainly by others. As such, it is not your exclusive procurement source -- there are others that you can try (e.g., Handango, Handmark, BPlay, GetJAR or Mobihand). I have found that there are very few apps that are exclusive to AppWorld. You can search the on-line catalog and then search out other procurement sources, including quite often the developer website itself.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I am using WLS7 with SP1.
I just recently migrated from WLS6.0. When my code tries to grab a
connection from the pool, it throws an exception
java.sql.SQLException: Pool connect failed:
weblogic.common.ResourceException: Access not allowed
at weblogic.jdbc.pool.Driver.connect(Driver.java:202)
Does anyone know if anything changed from 6.0 to 7?
Here is a piece of the code that throws exception.
Driver driver =
(Driver)Class.forName("weblogic.jdbc.pool.Driver")
.newInstance();
conn = driver.connect("jdbc:weblogic:pool:" +
dbName, null);
Thanks in advance.Hi Jung,
"Jung Yang" <[email protected]> wrote in message
news:[email protected]...
Do you know how to change security setting on the connection pool?
Thanks.WebConsole:
1.Compatibility Security => ACLs
Create a new ACL,
name : weblogic.jdbc.connectionPool.yourPoolname
permission : reserve, reset
group : everynone
2.Services => JDBC => Connection Pool
Create a new Connection Pool
ACL Name : weblogic.jdbc.connectionPool.yourPoolname
In 'Target' tab, choose server and click the Apply button
Slava
>
"Slava Imeshev" <[email protected]> wrote in message
news:[email protected]...
Hi Jung,
Could you try providing weblogic user name and password
in the properties?
Could you also check security setting of the connection pool?
Regards,
Slava Imeshev
"Jung Yang" <[email protected]> wrote in message
news:[email protected]...
Well that is exactly what I am doing. The variable dbName is database
connection pool name that I created in weblogic console. Again, it
worked
in WLS6 but after migration, it stopped working.
Thanks.
"Mitesh Patel" <[email protected]> wrote in message
news:[email protected]...
In my code I am supplying name of the connection pool already
created
in
weblogic server. I am asking you to get connection from the pool
using
pool
driver.
In your case you are trying to create connection straight to
database
using pool
driver.
What I am asking is pass name of the connection pool instead of
database
name.
Thanks,
Mitesh
Jung Yang wrote:
What would be the difference between your code and mine? Mine
simple
appends dbName string value for connection pool name at the end of
"jdbc:weblogic:pool:"? And why same exact code would work in WLS6and
not
work in WLS7?
Thanks.
"Mitesh Patel" <[email protected]> wrote in message
news:[email protected]...
conn = driver.connect("jdbc:weblogic:pool:" +
dbName, null);Instead of doing this what if you use
Connection conn =
myDriver.connect("jdbc:weblogic:pool:myConnectionPool", null);
Will you please try this and see if that helps?
Mitesh
Jung Yang wrote:
Isn't that exactly what I posted for my code piece?
Thanks.
"Mitesh Patel" <[email protected]> wrote in message
news:[email protected]...
Try As described below:
The following example demonstrates how to use a database
connection
pool
from a servlet.
Load the pool driver and cast it to java.sql.Driver. The
full
pathname
of
the driver is weblogic.jdbc.pool.Driver. For example:
Driver myDriver = (Driver)
Class.forName("weblogic.jdbc.pool.Driver").newInstance();
Create a connection using the URL for the driver, plus
(optionally)
the
name of the registered connection pool. The URL of the pool
driver
is
jdbc:weblogic:pool.
You can identify the pool in either of two ways:
Specify the name of the connection pool in a
java.util.Properties
object
using the key connectionPoolID. For example:
Properties props = new
Properties();props.put("connectionPoolID",
"myConnectionPool");Connection conn =
myDriver.connect("jdbc:weblogic:pool", props);
Add the name of the pool to the end of the URL. In this case
you
do
not
need a Properties object unless you are setting a username
and
password
for using a connection from the pool. For example:
Connection conn =
myDriver.connect("jdbc:weblogic:pool:myConnectionPool",
null);
Note that the Driver.connect() method is used in theseexamples
instead of
the DriverManger.getConnection() method. Although you may
use
DriverManger.getConnection() to obtain a databaseconnection,
we
recommend
that you use Driver.connect() because this method is not
synchronized
and
provides better performance.
Note that the Connection returned by connect() is an
instance
of
weblogic.jdbc.pool.Connection.
Call the close() method on the Connection object when youfinish
with
your
JDBC calls, so that the connection is properly returned to
the
pool. A
good coding practice is to create the connection in a try
block
and
then
close the connection in a finally block, to make sure the
connection
is
closed in all cases.
conn.close();
Mitesh
Jung Yang wrote:
I am using WLS7 with SP1.
I just recently migrated from WLS6.0. When my code tries
to
grab a
connection from the pool, it throws an exception
java.sql.SQLException: Pool connect failed:
weblogic.common.ResourceException: Access not allowed
at
weblogic.jdbc.pool.Driver.connect(Driver.java:202)
Does anyone know if anything changed from 6.0 to 7?
Here is a piece of the code that throws exception.
Driver driver =
(Driver)Class.forName("weblogic.jdbc.pool.Driver")
.newInstance();
conn =
driver.connect("jdbc:weblogic:pool:"
+
dbName,
null);
>>>>>>>>>
Thanks in advance. -
"Access not allowed for subject: principals=[]" Common Issue with no Repose
Hi all,
When upgrading from 8.1 to 8.1 SP4 (we have seen the issue as early as SP2), there is an exception thrown when trying to start the server where our application is deployed:
<pre>weblogic.management.NoAccessRuntimeException: Access not allowed for subject: principals=[], on ResourceType: Application Action: write, Target: Deployed
</pre>
Our application creates an InitialContext using properties from a standard properties file, and when the "java.naming.security.principal" and "java.naming.security.credentials" properties are omitted, the server will start and deploy the application, but it naturally will not work.
I have noticed that this issue has been brought up by several others:
http://forums.bea.com/bea/search.jspa?q=%22Access+not+allowed+for+subject%3A+principals%3D%5B%5D%22&objID=&dateRange=all&userID=&numResults=15
http://forums.bea.com/bea/thread.jspa?forumID=2058&threadID=200027601&messageID=200619947#200619947
http://forums.bea.com/bea/thread.jspa?forumID=2051&threadID=200021662&messageID=200590642#200590642
http://forums.bea.com/bea/message.jspa?messageID=200590569&tstart=0
But have seen nothing resembling even a hint of a cause.
Any suggestions that even get me going in the right direction would be appreciated.
<pre>
weblogic.management.NoAccessRuntimeException: Access not allowed for subject: principals=[], on ResourceType: Application Action: write, Target: Deployed
at weblogic.management.internal.SecurityHelper$IsAccessAllowedPrivilegeAction.wlsRun(SecurityHelper.java:623)
at weblogic.management.internal.SecurityHelper$IsAccessAllowedPrivilegeAction.run(SecurityHelper.java:510)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.management.internal.SecurityHelper.isAccessAllowed(SecurityHelper.java:398)
at weblogic.management.internal.RemoteMBeanServerImpl.private_setAttribute(RemoteMBeanServerImpl.java:430)
at weblogic.management.internal.RemoteMBeanServerImpl.setAttribute(RemoteMBeanServerImpl.java:387)
at weblogic.management.internal.MBeanProxy.setAttribute(MBeanProxy.java:741)
at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:475)
at weblogic.management.configuration.ApplicationMBean_Stub.setDeployed(ApplicationMBean_Stub.java:408)
at weblogic.management.mbeans.custom.ApplicationManager.setState(ApplicationManager.java:593)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(ApplicationManager.java:740)
at weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManager.java:501)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:754)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:733)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:509)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1560)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1528)
at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:988)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:946)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:954)
at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:481)
at weblogic.management.configuration.ApplicationManagerMBean_Stub.start(ApplicationManagerMBean_Stub.java:677)
at weblogic.management.Admin.startApplicationManager(Admin.java:2821)
at weblogic.management.AdminServerAdmin.startApplicationManager(AdminServerAdmin.java:624)
at weblogic.management.Admin.finish(Admin.java:2299)
at weblogic.management.AdminServerAdmin.finish(AdminServerAdmin.java:458)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:971)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
at weblogic.Server.main(Server.java:32)
</pre>For others who have received this error, I'll post what I think has turned out to be the cause.
Refer to
http://e-docs.bea.com/wls/docs81/jndi/jndi.html#471919
Which says:
=====
When you create a JNDI Context with a username and password, you associate a user with a thread. When the Context is created, the user is pushed onto the context stack associated with the thread. Before starting a new Context on the thread, you must close the first Context so that the first user is no longer associated with the thread. Otherwise, users are pushed down in the stack each time a new context created. This is not an efficient use of resources and may result in the incorrect user being returned by ctx.lookup() calls.
=====
Our application caches the Context created, and that Context is used by other objects to perform lookups. Prior to Sp2, this caused no issues when including the username and password as part of the properties passed to the InitialContext constructor.
I presume that closing the Context after it has been used would be the proper fix for this, but right now this Context is used in too many places once it is created. I was able to combat the issue by removing the username and password properties (java.naming.security.principal & java.naming.security.credentials) from the properties file. It seems to work as expected. -
Weblogic 7.0, Oracle9i - "Access not allowed" error
All:
I am looking for any suggestions/help/advice/etc on my problem. The background is this, I have an application that uses 3 MDBs, 3 Entity Beans, is deployed on Weblogic7.0 (the latest), and needs to query an Oracle9i database.
I have set up my drivers and URL, they work fine under a normal java class making a connection. They also return "success" when using dbping to test the connection, so the set up is right.
When Weblogic starts, the connection pool is made, the DataSource is fine -- but when the EJB is deployed it comes back with the SQLException "Access not allowed".
I've put the classes12.zip file at the beginning of the classpath, modified the setenv.cmd file so the PATH includes %ORACLE_HOME%\bin and %WL_HOME%\bin\oci920_8.
I've also put in the following in the weblogic-ejb-jar file:
<security-permission>
<description>Oracle</description>
<security-permission-spec>
grant {
permission java.lang.RuntimePermission "loadLibrary.ocijdbc9";
</security-permission-spec>
</security-permission>
I've even tried to do what the Security Manager portion of the Weblogic documentation says to do. It said to "activate the security manager" by putting the following line in the startWeblogic file:
-Djava.security.manager
None of these have worked -- I keep getting that error. Like I said previously I have tried the connections and they have worked through other methods.
I've tried everything, including using an XA driver -- to no avail. My forehead is getting really sore from banging it on the monitor --- can you help???? :/
Thanks!
The connection pool information follows (from the config.xml file):
<JDBCConnectionPool CapacityIncrement="1"
DriverName="oracle.jdbc.driver.OracleDriver" InitialCapacity="1"
LoginDelaySeconds="1" MaxCapacity="36" Name="P3IConnectionPool"
Properties="user=EI_SERVICES;password=EI_SERVICES;dll=ocijdbc9;protocol=thin"
RefreshMinutes="0" Targets="beaserver"
TestConnectionsOnReserve="true" TestTableName="STATE_LKUP" URL="jdbc:oracle:thin:@192.168.23.45:1521:ORASUN"/>Just in case anyone needs this in the future....
After creating the connection pool in Weblogic 7.0 (using the Weblogic console) right click on the connection pool and select "Define Policy", select "Default Authorizer", then enter "Caller is a member of the group everyone" and apply.
That takes care of the problem... didn't happen in Weblogic 6.1 -
Access not allowed on xsl files with 10.3.3
Under the Runtime Configuration Properties I have set the "disable external references" to false but I am still getting an "XML-21028: (Fatal Error) Access not allowed" when the report tries to reference a stylesheet placed in a directory under the Apache htdocs directory (The <DocumentRoot> and <Directory> have been set correctly as far as I can tell).
SteveThe app server needed to be shutdown and restarted in order for the change to this property to be recognized. However, now I have a problem with the subtemplates.xsl with a variable which is not defined: _XDONFSEPARATORS. I can find not one reference to this property on the oracle site.
-
I am a new user to the Photoshop CC 2014. I am unable to save images post processing. Error given is "Unable to save image Write access not granted". Can some one please help me with this.
I am using Mac OS Yosemite Version 10.10.2
Regds
ShashiIn a finder window highlight and right click the folder you are trying to save to and select Get Info. In the window that opens look at the bottom to see if you have Read/Write permissions. If you don't click the Plus sign and add your Admin Username to the list and give it full Read/Write permissions.
Open Disk Utility and on the First Aid tab select Repair Permissions and let it run. -
please help me with this problem? I keep on getting a message saying write access not granted, so i cant safe my files!
The drive appears in the sidebar with a tiny lock icon, and when I try to copy a file from my internal HD to the external (top level directory, or drag the items right onto the icon), the following things happen:
Open the Terminal in the /Applications/Utilities/ folder and enter the following:
chflags nouchg
followed by a space; next, drag the disk into the Terminal window and press Enter. The lock should now be gone.
The fact that my account was named both as owner and group seemed odd, since in Group the access was "read only".
Recent versions of Mac OS X create a group with the same name whenever you create an account from the Setup Assistant or System Preferences. The Group permissions don't apply in this case.
I changed the Group access to "read & Write", but it's not "sticking" -- when I close teh details field and reopen it, or close the get info window and reopen, the Group access settings go back to "read only".
Did you get an error message after doing this?
Verify/Repair permissions were dimmed for this drive (I assume becuase it doesn't have MacOS X installed on it?)
That is correct. The Repair Permissions mechanism uses data from the /Library/Receipts/ folder on a disk to function, and this data is only present on disks which have Mac OS X installed.
(12377) -
I set up my wifi, and when I go to the browser, I can go to Google and other websites correctly. When I tried to download app world, I got the message "Access not allowed". When I pressed the return key, it said my download was successful, but app world is not downloaded on my phone.
My brother and sister have the same phone, and they were able to download app world with no problems.
Anyone know how to fix this?I didn't mean to steal your thunders. LOL :-D No worries there friend. Hey... I at least got a helpful... whatever that amounts to in these new forums how is the bike riding, have you learn to breath yet?Haven't actually gotten to do any riding yet. So far I've been clearing my mind the old fashioned way. I've been "footing it" everywhere. Still does the same job though. Allows me a chance to clear my mind and get some exercise at the same time.
The only reason I haven't been riding yet is my bike still needs some more TLC before it'll allow me a ride without stranding me somewhere. Guess that's what I get for leaving it outside in Florida for 3 years. Plan on looking at it some more tomorrow and I should have it fixed then so I can get to riding! I've so been looking forward to getting back into it!!!
There is something really odd with ASI definitely agree.
You've got the right idea about how to handle the inconsistencies though. Treat it as though it's a three year old and hold its hand all the way through every little step!
Good to hear from you, hope all is going well in your part of the world! I'm slowly getting my self back and it's such a strange, but good, feeling! -
I've encoded a vinyl LP record into digital format and recorded it onto an usb as MP3 file. But when I tried to copy it onto my ipod classic, I get a message stating "was not copied to the ipod because it cannot be played on this ipod". Why?
I was refering to the "sample rate", normally 44.1 KHz, the iPod might not be able to play tracks with a non-standard rate. Otherwise I'm not sure what the issue might be.
tt2 -
Using Weblogic Platform 7.0 (installed from platform700_win32.exe),
Running a BPM Doamin(WLIDomain with BPM only).
When I try to access my entity bean(CMP), the following exception is getting thrown.
I have seen a similar post in here, but the answer to that post, which says to
provide ACL. does not apply quite well my scenario.
To do this, I right clicked on the connection pool and selected define Ploicy..
It shows two options
RealmAdapterAuthorizer and DefaultAuthorizer; On DefaultAuthroizer i specified
role accessing the resource would be "everyone". - restarted the server - but
still the same error.
Please suggest a solution if any. Do i have to get some service pack for this?
TIA
Ranjith.We have never seen a case yet where this was not a permissions problem.
Do you have a fileRealm.properties file as part of your configuration?
"Ranjith" <[email protected]> wrote in message
news:3f0fdeb3$[email protected]..
>
java.sql.SQLException: Cannot obtain connection after 3600 seconds. ,Exception
= Access not allowed
java.sql.SQLException: Cannot obtain connection after 3600 seconds. ,Exception
= Access not allowed
atweblogic.jdbc.jts.Connection.wrapAndThrowSQLException(Connection.java:701)
atweblogic.jdbc.jts.Connection.getOrCreateConnection(Connection.java:623)
atweblogic.jdbc.jts.Connection.prepareStatement(Connection.java:133)
atweblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(ConnectionImpl.ja
va:139)
atweblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.java:81
atservice.samplemgt.v1_0.ejb.entity.BanksampletypeCMP_ckv0ao__WebLogic_CMP_RDB
MS.ej
bFindAll(BanksampletypeCMP_ckv0ao__WebLogic_CMP_RDBMS.java:873)
at java.lang.reflect.Method.invoke(Native Method)
atweblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.collectionFinder(RDBMSPersi
stenceManager
java:300)
atweblogic.ejb20.manager.BaseEntityManager.collectionFinder(BaseEntityManager.
java:715)
atweblogic.ejb20.manager.BaseEntityManager.collectionFinder(BaseEntityManager.
java:688)
atweblogic.ejb20.internal.EntityEJBLocalHome.finder(EntityEJBLocalHome.java:47
6)
at ... -
Err : "Access Not Allowed to oracle.jdbc.driver.OraclePreparedStatement"
Hi,
How to resolve the error "Access Not Allowed to oracle.jdbc.driver.OraclePreparedStatement"
in jdeveloper?
Or
Can you please give me some sample pgms which uses oracle.jdbc.driver.OraclePreparedStatement?
Thanks in advance,
Senthil Kumar M.This is the error from the trace logs...
application [XMII] Cannot send an HTTP error response [500 Application error occurred during request processing. (details: com.sap.xmii.Illuminator.logging.LHException: com.sap.xmii.Illuminator.logging.LHException: java.lang.NoClassDefFoundError: oracle.jdbc.driver.OraclePreparedStatement)].
The error is: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException: The stream is closed.
Exception id: [0050569D6ACD006A0000010C000023D300046F4B653C90D7]
I could not find anything on the SDN regarding this message, so I may need to open up an OSS note.
Thanks
Skip Ford -
AS - all page items, access not allowed
I am upgrading an AppleScript from working with InDesign CS5.5 to CS6. When I recompile I get the syntax error:
"Can't set <<constant dpvtdppv>> to <<class aPgi>>.
Access not allowed."
My statement is a simple
"set pList to get all page items" within a tell myDoc section.
In reviewing the AS guide for InDesign CS6, the notes say that Chapter 4, covering all page items, was not changed in CS6. Page 113 of the guide phrases the statement without a "get", so my statement would be
"set pList to all page items". This fails with the same error. As my code gets plenty of use under CS5 and CS5.5, I suspect a dictionary error from Adobe.
Anyone with ideas?G'day
try :
set pList to every page item
m. -
SQLException: Access not allowed (problem with ACL)
Hi, I'm getting the following error when I start my Weblogic (7.0) server.
java.sql.SQLException: weblogic.common.ResourceException: Access not allowed
I followed these steps to Provide the necessary ACl permisiions:
1. Compatibility Security => ACLs
Create a new ACL:
name : weblogic.jdbc.connectionPool.yourPoolname
permission : admin
group : Administrators
2. Create a new Connection Pool:
ACL Name : weblogic.jdbc.connectionPool.yourPoolname
In 'Target' tab, choose server and click the Apply button.
I even checked fileRealm.properties, the user admin123 (the user name with which I start the server), is included in all the connectionpool ACL lists. I restarted the server to pick the new changes but it still gives the same errors.
Please help,
ThanksYou need to create the correct ACL for the DataSource following this procedure in the Administration Console:
1. Compatibility Security => ACLs
Create a new ACL:
name : weblogic.jdbc.connectionPool.yourPoolname
permission : admin
group : Administrators
2. Compatibility => click Refresh button
3. Services => JDBC => Connection Pool
Create a new Connection Pool:
ACL Name : weblogic.jdbc.connectionPool.yourPoolname
In 'Target' tab, choose server and click the Apply button.
4. Services => JDBC => Data Sources
You can create a new Data Source using this connection pool successfully
Regards,
Prasanna Yalam -
It won't let me save my work says write access not granted please help
It won’t let me save my work says write access not granted please help
Please provide some relevant information.
Are all operations and rools inoperable?
Do you get some error message?
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by pressing command-alt-shift/ctrl-alt-shift while starting Photoshop until the appropriate dialog appears after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)
Maybe you are looking for
-
I gave up on getting a single SQL to do this; I don't think it's possible?
Guys I asked a little while ago about a loyalty points system where the loyalties could not be revoked once awarded, so any refunds would make the points system "go into debt" internally and only start issuing loyalty points when the debt was cleared
-
How to change sharing settings with no video?
I have a macbook pro that does not have any sort of video output. Unfortunately remote login/screen sharing/ssh are all disabled and my version of realvnc is apparently just below the one that works with Lion causing the realvnc window on the remote
-
When I tried to make the game larger I pressed control plus. The image became different and all of the parts did not fit together like it was designed. I tried to make it like it was by pressing control minus (ctrl - ) nothing happened. When I start
-
How do I take firefox 4 off and go back to 3.6
I do not like the look or the difficulties associated with firefox 4 and ant to go back to something that is workable. How do I get rid of 4 and go back to 3.6
-
Error 1603 when installing Rollup 4 for Exchange 2010 SP2
Hi There, I have began upgrading our Exchange servers to Rollup 4 for Exchange 2010 SP2 last week and the first 3 servers all successfully installed it without any problems. However I have hit a problem with my 4th server. I am receiving the 'common