Write Back Error

I have Dashboards accessed by users through SSO login, i am trying to have write back enabled on one report.
The Write Back works fine when accessed with 'Administrator' user id,
but fails with the following error for other users
+SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 13017] User or group has not been granted the Direct Database Access privilege to access the database 'ANSWERS'. Please verify the User/Group Permissions in the Oracle BI Administration Tool. (HY000)+
I have given Manager Privilege 'Write Back' to Everyone, bit still facing the issue.
Please suggest.
Thank you,
Vikas
Edited by: vchahal on Jan 30, 2009 5:48 AM

I am still facing issue with write back with LDAP Authentication.
The rpd uses LDAP Authentication.
Oracle BI server take the User ID and password typed by user and pass them to LDAP server for authentication, hence User ID and passwords are not stored in the rpd.
The Write Back report works for Administrator id.
The Write Back report also works for a user id created in rpd (after assiging all the required privileges for write back).
The Write Back report fails for LDAP user id with the following error
SQL_STATE: HY000] nQSError: 10058 A general error has occurred. nQSError: 13017 User or group has not been granted the Direct Database Access privilege to access the database 'ANSWERS'. Please verify the User/Group Permissions in the Oracle BI Administration Tool. (HY000)
Please suggest.
Thank You
Edited by: vchahal on Feb 4, 2009 9:05 AM

Similar Messages

Write Back Error in OBIEE 11.1.1.7.150120

Hello everybody,
i have a problem with the writeback capabilities of OBIEE 11.1.1.7.150120.
After the Migration from 10g to 11g i would like to customize the write back in 11g. I go like Oracle BI Practice: OBIEE 11g Configure Writeback this, but getting an OBIEE error:
"Write Back Error
An error occurred while writing to the server. Please check to make sure you have entered appropriate values. If the problem persists, contact your system administrator."
The table does not have any constraint. I would like to insert for example the value "2".
In my table properties i fill in "filling".
My ...\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\analyticsRes\customMessages\writeback.xml looks like that:
<?xml version="1.0" encoding="utf-8" ?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="filling">
<XML>
<writeBack connectionPool="Connection Pool">
<insert> </insert>
<update>update analyticmodel.last_runtimes set laru_exec = @1, laru_runtime_start = sysdate </update>
</writeBack>
</XML>
</WebMessage>
<WebMessage name="machine_filling">
<XML>
<writeBack connectionPool="Connection Pool">
<insert> </insert>
<update>update analyticmodel.machine_filling set mf_mach_id = @{c0}</update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
Thank you very much
Best regards
Christian

Hi Cristian,
You must use '' at script when call some column value. (use '@1' instead of @1)
Tip.. note you can use your "WebMessage Name" (from your script, like "filling", "machine_filing") into your analisys.
Hope this help
Felipe Idalgo

OBIEE 11G Write Back Error

Hi All:
I am testing the OBIEE 11G write back function. After all the steps , there's an Error message said "Write back Error" . No other detail information. Do you have any idea about where's the problem of it?
My xml file was under the folder of 'C:\OBIEE11\Oracle_BI1\bifoundation\web\msgdb'. and the detail is as below.
<?xml version="1.0" encoding="utf-8" ?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="write_back_test">
<XML>
<writeBack connectionPool="Connection Pool">
<insert> </insert> <update>FACT_Writeback set MAX_LY2 = '@{c1}' where PERIOD_KEY = '@{c0}'
</update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
Really Thanks for your help.
Sunny.Sun

Hi,
I think these is a problem with your connection pool name, please check it. It's a name of connection pool in BI administrator.
if it's not problem, Can you try my way, replace '@{c1}', '@{c0}' by @1, @2...with 1,2 is a number of column in Criteria.
It's my template :
<?xml version="1.0" encoding="utf-8" ?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="SetQuotaUseID">
<XML>
<writeBack connectionPool="WB_CONN">
<insert> </insert>
<update>UPDATE biee_map_revenue SET DIST_CODE=@5 WHERE REV_ID = @1 </update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
Edited by: OBIEE.vn on Feb 13, 2011 6:31 PM

OBIEE Write Back ERROR

Hi All,
Pl Help me in Resolving the Error
"Write Back Error
The system is unable to read the Write Back Template 'HIRING_STATUS'. Please contact your system administrator. "
FolderPath:\\
C:\OracleBI\web\msgdb\customMessages\Hiring_status.xml
Here Table Name is BIDW_Final
Column Name is Hiring_status where i am trying to write.
<?xml version="1.0" encoding="utf-8"?>
<WebMessageTables xmlns:sawnm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="HIRING_STATUS">
<XML>
<WriteBack connectionPool="RRF_TEST">
<Insert> insert into BIDW_FINAL (HIRING_STATUS) values ('@{c1}')
</Insert>
<Update> </Update>
<postUpdate>COMMIT</postUpdate>
</WriteBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
I gave access,and done all the write back settings given (Follwing eg: OBIEE writeback
Kindly help me in resolving the issue.
Thanks in Advance,
RK

Hi,
See the below link, it may help you,
http://gerardnico.com/wiki/dat/obiee/write_back#support
The write back name must be the same in the node WebMessage of the xml message
<WebMessage name="*HIRING_STATUS*">
Thanks,
Balaa....
Edited by: Balaa on Apr 30, 2010 5:09 PM
Edited by: Balaa on Apr 30, 2010 5:11 PM

Write Back Error The system is unable to read the Write Back Template 'test

Write Back Error The system is unable to read the Write Back Template 'test'. Please contact your system administrator. OK
But, the update button is on.
It did work and now it doesn't... nothing of course that we know of has changed. We got this message when we started and the name of the file was what we put as template name in obiee instead of webmessage name but the update button was off.... now we have update button on and same error.
File is on unix and we have made 777 so it's open to the world.
<?xml version="1.0" encoding="utf-8"?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="D_EXEC_METRIC">
<WebMessage name="test">
<XML>
<writeBack connectionPool="writeback">
<update>UPDATE D_EXEC_METRIC SET EXEC_METRIC_ICON_WID = @{c3}, EXEC_METRIC_COMMENT='@{c7}' WHERE SECTOR_WID=@{c0} AND EXEC_METRIC_WID=@{c2}</update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
thanks in advance for your help!

You're better off searching for an answer to this question in the [OBIEE Forum|http://forums.oracle.com/forums/forum.jspa?forumID=378].
The topic is discussed at least twice a month so there's tons of posts with all the answers you need. Make a forum search for writeback and you'll have your answer.
Cheers,
C.

Write back error - 11.1.1.6.2

Hi,
Has anyone been able to update records using writeback in 11.1.1.6.2?
Update works, in 10g but in 11.1.1.6.2 I get always the error "Write Back Error".
I have tried the following steps:
1) physical table non-cacheable.
2) in logical column writeback option
3) grant read/write columns in rpd
3) LightWriteback element in the instanceconfig.xml file
4) In Oracle BI Presentation Services, grant write-back privileges to the user
4) pasting xml file in custommessages folders:
D:\OBIEE11g\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\analyticsRes\customMessages
D:\OBIEE11g\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\analyticsRes\WEB-INF\customMessages
My template is:
<?xml version="1.0" encoding="utf-8" ?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="test">
<XML>
<writeBack connectionPool="testdb">
<insert>UPDATE user1.table_write_back SET val1=@{c4}, val2=@{c10} WHERE cod_month=@{c8} and cod_line = @{c9}</insert>
<update>UPDATE user1.table_write_back SET val1=@{c4}, val2=@{c10} WHERE cod_month=@{c8} and cod_line = @{c9}</update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
Any suggestion?
Thanks.

Hello PeterJwindows8,
I understand that your iPhone 5 is not recognized by iTunes. The following article may help to resolve your issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

Oracle BI Write Back on NULL values - Write Back Error

Hi together,
Write Back Error
An error occurred while writing to the server. Please check to make sure you have entered appropriate values. If the problem persists, contact your system administrator
I receive this message when I try to make a update of an null value in the database.
update value on value or value to null works fine. So the XML Message is working on production.
Is this a BUG?
Regards,
Stefan
<?xml version="1.0" encoding="utf-8" ?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="SetWriteBackGKV">
<XML>
<writeBack connectionPool="QS_DWH_DB">
<insert> </insert>
<update>UPDATE QS_DWH.CKVB_HR_EXTERNAL SET CKVB_HR_EXTERNAL.GKV_SICKNESS_PERC = '@{c7}' WHERE CKVB_HR_EXTERNAL.D_TIME ='@{c5}'</update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>

Hi,
http://gerardnico.com/wiki/dat/obiee/write_back -- recheck your configuration following this link step by step with screen shots.
Note : The Problem Occurred two ways,
1. Problem your XMl Script
2. If null value not present in your columns in your table in the database.The problem is occured.
please check below steps.
1. Are you using OCI or ODBC in your connection pool? Try it with OCI Call Interface 11g.
2.Remove the commit tag from the XML file.
<postUpdate>COMMIT</postUpdate>
=============================================================================================================
This xml file working for me.
Insert--
A couple of small adjustments got your XML to work here:
<?xml version="1.0"; encoding="utf-8"?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1";>
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="WriteBack">
<XML>
<writeBack connectionPool="Connection Pool">
<insert> INSERT INTO FACT (PRICE,PRODUCT_KEY,REGION_KEY,SALE_UNIT,TIMEKEY,SALES_QUOTA)
values (@{c7},@{c8},@{c9},@{c10},@{c11},@{c5} ) </insert>
<update> </update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
The <writeBack> tag is written with a lower case "w".
The "connetionPool" needs an upper case "P".
Update--
I think that you have to specify also an SQL statement for the update tag, for example:
<?xml version="1.0"; encoding="utf-8"?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1";>
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="pmet_update">
<XML>
<writeBack connectionPool="PMTCOG">
<insert> select null from dual</insert>
<update> UPDATE XREF_PMET_URL SET URL= '@{c1}' WHERE API='@{c0}'</update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
The witeback wants for both the tags (<insert></insert> and <update></update>) an SQL Statement.
Hope this help's
Thanks
Satya

Red box "Write Back Error" OBIEE 11.1.1.6.0

Hi, are there anyone here succeed setup writeback in obiee 11.1.1.6.0 windows or linux system?
I have tried every tutorials on the internet, but always stuck in red box "Write Back Error" and don't have any clue in the log files.
thanks.

hi Devarasu, thanks for reply, I have done all your instruction but still no luck, red box with "write back error" always appear. Do you know how can I track it down? Or should I patch or upgrade to 11.1.1.6.2 BP1 ?

OBIEE 11.1.1.5.0 Write back error.

I am working on OBIEE 11G(11.1.1.5.0) write back feature. After all the steps which were mentioned in 11g Documentation , there's an Error message said "Write back Error" . No other detail information. Do you have any idea about it?

Yes,
Please note that in Oracle BI 11g, the use of PL/SQL (any non core SQL logic) is no applicable to in the writeback configuration files. Do not use ';' semi-colons. Also such things as BEGIN / END do not work as they did in Oracle BI 10g.

Obiee 10g write back error while insertion

Hi,
Im getting an error while trying to write back a column to oracle database.
Error details
An error occurred while writing to the server. Please check to make sure you have entered appropriate values. If the problem persists, contact your system administrator.
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27024] The EXECUTE PHYSICAL statement must specify a physical SQL statement to execute. (HY000)
SQL Issued: EXECUTE PHYSICAL CONNECTION POOL orcl
Xml issued
<?xml version="1.0" encoding="utf-8"?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="WriteBack">
<XML>
<writeBack connectionPool="orcl">
<insert> INSERT INTO writebackasim(name)values (@{c1}) </insert>
<update> </update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
Help me please...

now it is updating the value...But still error message is coming
and i have changed the code to insert..BUt now getting the error message and not inserting the value.. can you please debug this.
?xml version="1.0" encoding="utf-8"?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="WriteBack">
<XML>
<writeBack connectionPool="orcl">
<insert>insert into writebackasim(id,name)values(@{c0},'@{c1}')</insert>
<update>select null from dual</update>
<postUpdate>COMMIT</postUpdate>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
error message
An error occurred while writing to the server. Please check to make sure you have entered appropriate values. If the problem persists, contact your system administrator.
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27024] The EXECUTE PHYSICAL statement must specify a physical SQL statement to execute. (HY000)
SQL Issued: EXECUTE PHYSICAL CONNECTION POOL orcl COMMIT
-

OBIEE write back error MSG: OPR4ONWY:U9IM8TAC:OI2DL65P

Hello there,
I've been trying to use OBIEE write back function. I've created XML template to insert and update value in OBIEE dashboard and then to the DB. I've look into several research paper, yet I still have the problem. Your help is greatly appreciated. I thank you so much in advance for your help. Arnold
Pls see the following detailed info concerning this error:
Error MSG detail:
=============
An error occurred while writing to the server. Please check to make sure you have entered appropriate values. If the problem persists, contact your system administrator.
Odbc driver returned an error (SQLExecDirectW).
Error code:
=========
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27024] The EXECUTE PHYSICAL statement must specify a physical SQL statement to execute. (HY000)
SQL Issued: EXECUTE PHYSICAL CONNECTION POOL SH
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27024] The EXECUTE PHYSICAL statement must specify a physical SQL statement to execute. (HY000)
SQL Issued: EXECUTE PHYSICAL CONNECTION POOL SH
XML template:
==========
<?xml version="1.0" encoding="utf-8" ?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="SHNEW">
<XML>
<writeBack connectionPool="SH">
<insert>INSERT into sales (sales_quota) values(@{c0})</insert>
<update> </update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>

You don't have any update statement here :
<update> </update>
Research when insert part is called and when update is called.

Write Back Error: The system was unable to generate appropriate SQL

All,
Have looked at the previous threads on this topic and it has usually been syntax problems in the xml file. I've been over it a million times and can't see any problems.
The error I'm getting is when I click the "update" button to initiate the write-back;
The system was unable to generate appropriate SQL. Please contact your system administrator.
Template: 'UPDATE WC_DEPT_GOALS_D SET Week_Beginning = @{c0}, Week_Ending = @{c1} WHERE id = @{c2} '
Record: '<record action="update"><value columnID="c2">142</value><value columnID="c0">04/30/2012</value><value columnID="c1">05/06/2011</value></record>'
My xml file is as follows;
<?xml version="1.0" encoding="utf-8" ?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="GOALS">
<XML>
<writeBack connectionPool="GL Oracle Data Warehouse Connection Pool">
<insert> </insert>
<update>UPDATE WC_DEPT_GOALS_D SET Week_Beginning = @{c0}, Week_Ending = @{c1} WHERE id = @{c2} </update>
<postUpdate>COMMIT</postUpdate>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
Week Beginning and Week End are just two columns from WC_DEPT_GOALS_D - 44 columns in total which I want to write back to. These two are datetime, the others are int or float. I can't even get it to write back with these two, let a lone the other 42! :)
Any suggestions? Thanks guys!
Please note, I've also tried it without the "postUpdate" COMMIT line. Same error.
Edited by: Ally on Jun 3, 2011 7:50 AM
Edited by: Ally on Jun 3, 2011 8:00 AM

If your column data type is varchar then you have to specify that in single quote
COMMIT :if your DB supports automatic commit so you don't have to add it.
check that the name in "<WebMessage name="GOALS">" is the exact same case as what you have in your report. i.e. it's Goals in the XML and then it cannot be GOALS in the Report or goals.
And also try this..
<update>UPDATE WC_DEPT_GOALS_D SET Week_Beginning = @{c0} WHERE id = @{c2}
UPDATE WC_DEPT_GOALS_D SET Week_Ending = @{c1} WHERE id = @{c2}</update>
Restart all the services and oc4j
Cheers,
Aravind
Edited by: Aravind Addala on Jun 3, 2011 8:51 AM
Edited by: Aravind Addala on Jun 3, 2011 8:57 AM

Write Back Error OBIEE 11g

I am facing the following error massege in writeback funtionality.
I checked the value ,connection pool,writable,read/write permissions but not resolved the issue.
"An error occurred while writing to the server. Please check to make sure you have entered appropriate values. If the problem persists, contact your system administrator."
Any help about that ?

Hi,
http://satyaobieesolutions.blogspot.in/2013/03/write-back.html -- recheck your configuration following this link step by step with screen shots.
http://satyaobieesolutions.blogspot.in/2012/06/obiee-10g11g-writeback-capabilities.html
http://satyaobieesolutions.blogspot.in/2012/06/excel-data-source-writeback-in-obiee.html Note : The Problem Occurred two ways,
1. Problem your XMl Script
2. If null value not present in your columns in your table in database.The ; problem has occured.
please check below steps.
1. Are you using OCI or ODBC in your connection pool? Try it with OCI Call Interface 11g.
2.Remove the commit tag from the XML file.
<postUpdate>COMMIT</postUpdate>
=============================================================================================================
This xml file working for me.
Insert--
A couple of small adjustments got your XML to work here:
<?xml version="1.0"; encoding="utf-8"?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1";>
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="WriteBack">
<XML>
<writeBack connectionPool="Connection Pool">
<insert> INSERT INTO FACT (PRICE,PRODUCT_KEY,REGION_KEY,SALE_UNIT,TIMEKEY,SALES_QUOTA)
values (@{c7},@{c8},@{c9},@{c10},@{c11},@{c5} ) </insert>
<update> </update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
The <writeBack> tag is written with a lower case "w".
The "connetionPool" needs an upper case "P".
Update--
I think that you have to specify also an SQL statement for the update tag, for example:
<?xml version="1.0"; encoding="utf-8"?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1";>
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="pmet_update">
<XML>
<writeBack connectionPool="PMTCOG">
<insert> select null from dual</insert>
<update> UPDATE XREF_PMET_URL SET URL= '@{c1}' WHERE API='@{c0}'</update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
The witeback wants for both the tags (<insert></insert> and <update></update>) an SQL Statement.
Hope this help's
Thanks
Satya

Write back error, help

Hi all,
In my write back report, i got this error:
error code: OPR4ONWY:U9IM8TAC:OI2DL65P
状态: HY000。代码: 10058。 [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27024] The EXECUTE PHYSICAL statement must specify a physical SQL statement to execute. (HY000)
Issue SQL: EXECUTE PHYSICAL CONNECTION POOL "connection pool" COMMIT
I checked in database, data have changed in db, but why raise this error?
Edited by: jacky on 2010-7-27 下午8:42

Hi Jacky,
I guess you should put an insert statement in place .If the column that you are updating has null values then it will look for insert statement but if you are updating a column value that already has some value then it will look for update statement.For ex : if you are updating some meaure value from 200 to 300 then it will execute update statemnt but if you are updating null to 300 then BI server will look for insert staement.
I worked on this a long way back so if you can try puttting insert statement then we can reach at some conclusion.
Thanks
Sandeep

WRITE BACK ERROR URGENT HELP

Hi Experts,
Below is the xml code for the write back and i am getting the error .
Please go through and let me know how shud i correct the code if it is wrong,...
<?xml version="1.0" encoding="utf-8"?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="writeBack" table="Messages">
<WebMessage name="CUST_FPP_REV1">
<XML>
<writeBack connectionPool="RecoPool">
<insert>INSERT into DAILY.REVRECAT (SERVICE_REV) values (@{c4})</insert>
<update> UPDATE DAILY.REVRECAT set SERVICE_REV=@(c4) where COMBI='@(c17)'</update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
The error I am getting when I click on the write back button is
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. NQODBC SQL_STATE: HY000 nQSError: 10058 A general error has occurred. nQSError: 43093 An error occurred while processing the EXECUTE PHYSICAL statement. nQSError: 17001 Oracle Error code: 904, message: ORA-00904: "C4": invalid identifier at OCI call OCIStmtExecute: UPDATE DAILY.REVRECAT set SERVICE_REV=(c4) COMBI='(c17)'. nQSError: 17011 SQL statement execution failed. (HY000)
SQL Issued: EXECUTE PHYSICAL CONNECTION POOL RecoPool UPDATE DAILY.REVRECAT set SERVICE_REV=(c4) where COMBI='(c17)' "Also can we pass prsentation variables in the write back xml template..(.in the where clause in the SQL query)
Appreciate your immediate reponse as this has become a work stopper for me ...
Please let me know where I am going wrong.
Regards,
Veena A
Edited by: mithuu on Mar 3, 2009 3:17 AM
Edited by: mithuu on Mar 3, 2009 3:19 AM

Hi Nico,
Thanks for your reply but i am really confused...
I tried with the points you told but not now gettig the error as
" Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. NQODBC SQL_STATE: HY000 nQSError: 10058 A general error has occurred. nQSError: 43093 An error occurred while processing the EXECUTE PHYSICAL statement. nQSError: 17001 Oracle Error code: 904, message: ORA-00904: "C4": invalid identifier at OCI call OCIStmtExecute: UPDATE DAILY.REVRECAT set SERVICE_REV=(c4) COMBI='(c17)'. nQSError: 17011 SQL statement execution failed. (HY000)
SQL Issued: EXECUTE PHYSICAL CONNECTION POOL RecoPool UPDATE DAILY.REVRECAT set SERVICE_REV=(c4) where COMBI='(c17)' "
Please help as i am new to this tool.
Appreciate your help.
Regards,
Veena A
Edited by: mithuu on Mar 3, 2009 3:20 AM

Write Back Error

Similar Messages

Maybe you are looking for