Write error. [Error sending mail message to SMTP server. Return code: [].]:

Hi ,
I am getting the below error when scheduling a report which is larger in size in excel format.
write error. [Error sending mail message to SMTP server. Return code: [].]: [CrystalEnterprise.Smtp]
The same error does not come up when sending the same report in XLS format using outlook.
Can some one confirm if this error is because of the size of the report as I see a different error in XIR2 incase the size the exceeds the email server limit.
~Neethi

Hi,
this could be
Maybe you have different limits for service smtp account (which the BO Server should use) and User smtp accounts.
Thats why you can sent it via outlook and not from the BO Server.
Regards
-Seb.

Similar Messages

Write error. [CrystalEnterprise.Smtp]: [Error sending mail message to SMTP

Hi,
The below error messgage i am getting while scheduling report in CMC. My report getting refreshed successfully but while posting refreshed file(Excel) it is not posting and throwing below error.
Error Message:
write error. [CrystalEnterprise.Smtp]: [Error sending mail message to SMTP server. Return code: [].]
please provide some help on this.
Thanks
Vivek

Hi Vivek
Mails to the destinations are delievered by SMTP server. Size of the file in the mail depends on the SMTP server.
For example, If SMTP server does not permit file size more than 2MB then that file won't be delievered.
For testing purpose copy the instance generated in Filestore to your local drive and send this instance using your mail client to
desired destination.
You can try sending large size file from your mail client to test SMTP server capacity of sending large size file.
Thanks,
Hrishikesh Parasnis

Can't Send Mail Via HughesNet SMTP Server

After installing 10.5 I find that I can receive mail from my ISP (HughesNet) but I can't send mail through the smtp server. I've tried every setting possible and even duplicated the settings off my wife's 10.4.10 iMac and I still can't send mail. All I see is that the smtp service is "Offline."
Fortunately, I have a .Mac account so I can send mail using that smtp server. But I'd like to be abel to use my HughesNet server.
Does anyone have any suggestions?

My mom uses RoadRunner by Time Warner. She was able to receive email using Leopard and Mail but not send. SMTP server was the big problem like everyone else here experienced. We finally were able to get it to work using many ideas here. What we did:
1) Delete com.apple.mail.plist from the User/Library/Preferences folder (BACK UP YOUR EMAIL FIRST)
2) Open Mail and create a new account but disable the automatic set-up feature, put your info in manually.
3) Uncheck " Use only this server" from the outgoing mail
4) Under the Advanced tab on Mail Prefs "port set to 25", Uncheck "SSL" box, and uncheck "Use Authentication"
5) Now hit Create
It took Mail about 20 minutes to contact the SMTP server, but it did and now I can send and receive Mail without any problems on her computer.
Bad Apple...stop criticizing MS and Vista when your own house is not in order yet. Hope this helps someone out there.....

Sending mail regardless of SMTP-server.

Hallo
A lot of my friends who - unfortunantely uses PC - can send mail regardless of where they are situated and they dont have to change there SMTP-settings. I´ve tried to make it work by making the same settings as I use for outgoing mail and asked my mac use my password. But it doesnt work:-(... Can anybody explain this? What am I doing wrong?
Thanks!
Mikkel

Thank you VERY much for your reply.
The message that appears when I send something is:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
MESSAGE delivery failed.
The sender address [email protected] was rejected by the server.
The server response was: 5.1.0 Authentication required.
You can try to send using a different server. All messages will use this server until you quit or change your network settings.
Send message using: smtp.gis net
smtp.mac.com
Edit Message Use Selected Served Try Again Later
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Later today I will try to follow the procedure you suggested and post a reply.
F.Y.I., I previously changed the settings needed by my previous server to ones required by Comcast.

Send mail without local SMTP server

Hey guys,
Are there any API packages, that one can use with Java mail API to encode a mail to SMTP and send to receipent mail host directly. (without using a local SMTP server)
I am not talking abt bulk mailer packages. Just an API package that we can program to.
Appreciate your help guys
thanx !

Ex: I want to write a simple SMTP client.
But i don't want the user to have to input a smtp server address.This is similar as if you wanted to write a simple browser - without wanting to bother the user to provide the URL's to browse!
There is no "default mail host". Can not be generally - the network situations can be considerably different. One box is a standalone one with maybe a modem link, the other is on a LAN, the third one is a multi-address host itself bridging a LAN and a WAN etc.
De nada.

Sending mail with new SMTP server

I recently switched from a tel.internet provider to COMCAST cable.
I want to use my MAIL program, but each time I try to send mail, a box appears on my screen showing my old provider. I then have to click and the mail goes out.
I have reset my COMCAST settings properly. COMCAST says it is a Apple computer setting problem. What steps do I have to take to get my MAIL to work properly?

Thank you VERY much for your reply.
The message that appears when I send something is:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
MESSAGE delivery failed.
The sender address [email protected] was rejected by the server.
The server response was: 5.1.0 Authentication required.
You can try to send using a different server. All messages will use this server until you quit or change your network settings.
Send message using: smtp.gis net
smtp.mac.com
Edit Message Use Selected Served Try Again Later
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Later today I will try to follow the procedure you suggested and post a reply.
F.Y.I., I previously changed the settings needed by my previous server to ones required by Comcast.

The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your server administrator

I got this problem when I tried to configure out-going email and add an account to farm administrator group.
I configure out-going email according to this website http://technet.microsoft.com/en-us/library/cc288949.aspx
Here are the screen shots.
The SMTP server and email accounts work out OK when I use Outlook 2010 to test.
Anyone can help me about it? Thanks.
Here is the log.
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
8gsf
High
#160008: The e-mail address 'admin3.sharepoint@domain' contains illegal
characters. df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation General
8kh7 High
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
7946 Critical
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation Runtime
tkau Unexpected
Microsoft.SharePoint.SPException: The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your
server administrator. at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(EntityEditor picker, String subject, String message) at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String
eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStage...
df98555c-612f-4a58-9443-ab6e9a4fcc53
The e-mail address I have tested it for several times and there is no problem.
Anyone has any clue about this error?

Hi.
This I have seen before...
It can be that the SMTP relay server is configured to only allow certain IP ranges or addresses.
It can be that the firewall on the SP server does not allow for SMTP traffic (normally 25, for example for Exchange).
It can be that there is an Antivirus on the SP server(Client AV) that prohobits the Timer service to send email from this server. I have seen MacAfee do this. Needed an policy change.
If, its the builtin SMTP service you are using, check this link:
http://blog.sharepointrx.com/2010/11/18/setting-up-the-iis-smtp-server-for-sending-email-from-sharepoint-2010-on-server-2008-r2/
Check that and try again.
Regards
Thomas Balkeståhl - Technical Specialist - SharePoint -
http://blog.blksthl.com
Download the SharePoint Branding Project here
Download the SharePoint 2010 Site Settings Explained here

SMICM error while sending mail using SMTP server

Hi All,
We are not able send mails using SMTP server.
We have made every settings necessary in SCOT, SO16 , SMTP service is activated, default domain is maintained etc
Only things which seems to be wrong is in SMICM trace file.
[Thr 13] *** ERROR => NiBufIConnect: non-buffered connect pending after 5000ms (hdl 29;10.26.24.44:1090) [nibuf.cpp 4608]
[Thr 13] *** WARNING => Connection request from (0/1/0) to host: 10.26.24.44, service: 1090 failed (NIECONN_REFUSED)
[icxxconn_mt.c 2321]
This error is getting repeated in it.
BUt I am not sure why it it trying to hit 10.26.24.44, as we dont have any server by this ip. The ip is only not resolvable from the server.
1 more thing, at OS level, following parameter is maintained in profile :
icm/server_port_1 = PROT=SMTP,PORT=25000,TIMEOUT=180
But in SCOT, under SMTP node PORT is given as 25.
Kindly let me know what going wrong here?
Thanks

also getting error as follows
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1
Authentication Required. Learn more at
at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
at ST_c121e07caaa94c21bb1355d4f753112f.vbproj.ScriptMain.Main()
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()

Error while sending mail using script task in ssis 2008

Hi,
i am trying to send mail using ssis 2008 script task.for my requirement i am not able to use send mail task.
code i have used is
declared read only variables system::packagename
Dim PACKAGE As String
PACKAGE = Dts.Variables("System::PackageName").Value.ToString()
Dim myHtmlMessage As MailMessage
Dim mySmtpClient As SmtpClient
myHtmlMessage = New MailMessage("[email protected]", "[email protected]", "PACKAGE STATUS", PACKAGE + "WAS FAILED")
mySmtpClient = New SmtpClient("smtp.gmail.com")
mySmtpClient.Credentials = New NetworkCredential("[email protected]", "mypassword")
mySmtpClient.EnableSsl = True
mySmtpClient.Port = 587
mySmtpClient.Send(myHtmlMessage)
error i am getting is
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1
Authentication Required. Learn more at
at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
at ST_c121e07caaa94c21bb1355d4f753112f.vbproj.ScriptMain.Main()
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
can any one tell me where i am going wrong

also getting error as follows
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1
Authentication Required. Learn more at
at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
at ST_c121e07caaa94c21bb1355d4f753112f.vbproj.ScriptMain.Main()
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()

Error in sending mail using ssl server

Hi All
Please help in resolving the below issue i am getting the following error while sending mail. I am using the IMAP server and it is ssl configured.
DEBUG: setDebug: JavaMail version 1.4ea
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc]
DEBUG SMTP: useEhlo true, useAuth false
DEBUG SMTP: trying to connect to host "mail.test.com", port 465, isSSL true
DEBUG SMTP: exception reading response: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path validation failed: java.security.cert.CertPathValidatorException: subject/issuer name chaining check failed
javax.mail.MessagingException: Exception reading response;
nested exception is:
     javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path validation failed: java.security.cert.CertPathValidatorException: subject/issuer name chaining check failed
     at com.sun.mail.smtp.SMTPTransport.readServerResponse(SMTPTransport.java:1462)
     at com.sun.mail.smtp.SMTPTransport.openServer(SMTPTransport.java:1260)
     at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:370)
     at javax.mail.Service.connect(Service.java:275)
     at com.test.test.JavaMailApp2.main(JavaMailApp2.java:59)
Caused by: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path validation failed: java.security.cert.CertPathValidatorException: subject/issuer name chaining check failed
     at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(Unknown Source)
     at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Unknown Source)
     at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Unknown Source)
     at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(Unknown Source)
     at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(Unknown Source)
     at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Unknown Source)
     at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(Unknown Source)
     at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
     at com.sun.mail.util.TraceInputStream.read(TraceInputStream.java:97)
     at java.io.BufferedInputStream.fill(Unknown Source)
     at java.io.BufferedInputStream.read(Unknown Source)
     at com.sun.mail.util.LineInputStream.readLine(LineInputStream.java:75)
     at com.sun.mail.smtp.SMTPTransport.readServerResponse(SMTPTransport.java:1440)
     ... 4 more
Caused by: sun.security.validator.ValidatorException: PKIX path validation failed: java.security.cert.CertPathValidatorException: subject/issuer name chaining check failed
     at sun.security.validator.PKIXValidator.doValidate(Unknown Source)
     at sun.security.validator.PKIXValidator.doValidate(Unknown Source)
     at sun.security.validator.PKIXValidator.engineValidate(Unknown Source)
     at sun.security.validator.Validator.validate(Unknown Source)
     at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.validate(Unknown Source)
     at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(Unknown Source)
     at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(Unknown Source)
     ... 17 more
Caused by: java.security.cert.CertPathValidatorException: subject/issuer name chaining check failed
     at sun.security.provider.certpath.PKIXMasterCertPathValidator.validate(Unknown Source)
     at sun.security.provider.certpath.PKIXCertPathValidator.doValidate(Unknown Source)
     at sun.security.provider.certpath.PKIXCertPathValidator.engineValidate(Unknown Source)
     at java.security.cert.CertPathValidator.validate(Unknown Source)
     ... 24 moreBelow is the source code of the program.
package com.test.test;
import java.security.Security;
import java.util.Properties;
import javax.mail.Authenticator;
import javax.mail.Message;
import javax.mail.MessagingException;
import javax.mail.NoSuchProviderException;
import javax.mail.PasswordAuthentication;
import javax.mail.Session;
import javax.mail.Transport;
import javax.mail.internet.AddressException;
import javax.mail.internet.InternetAddress;
import javax.mail.internet.MimeMessage;
public class JavaMailApp {
     public static void main( String[] args )
          String d_email = "[email protected]";
          String d_uname = "ots.support";
          String d_password = "password";
          String d_host = "mail.test.com";
          String d_port = "465"; //465,587
          String m_to = "[email protected]";
          String m_subject = "Testing";
          String m_text = "Hey, this is the testing email.";
          Properties props = new Properties();
          props.put("mail.smtp.user", d_email);
          props.put("mail.smtp.host", d_host);
          props.put("mail.smtp.port", d_port);
          props.put("mail.smtp.starttls.enable","true");
          props.put("mail.smtp.debug", "true");
          props.put("mail.smtp.auth", "true");
          props.put("mail.smtp.socketFactory.port", d_port);
          props.put("mail.smtp.socketFactory.class", "javax.net.ssl.SSLSocketFactory");
          props.put("mail.smtp.socketFactory.fallback", "false");
          SMTPAuthenticator auth = new SMTPAuthenticator();
          Session session = Session.getInstance(props, auth);
          session.setDebug(true);
          MimeMessage msg = new MimeMessage(session);
          try {
               msg.setText(m_text);
               msg.setSubject(m_subject);
               msg.setFrom(new InternetAddress(d_email));
               msg.addRecipient(Message.RecipientType.TO, new InternetAddress(m_to));
               Transport transport = session.getTransport("smtps");
               transport.connect(d_host, 465, d_uname, d_password);
               transport.sendMessage(msg, msg.getAllRecipients());
               transport.close();
          } catch (MessagingException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
public class SMTPAuthenticator extends Authenticator{
     public PasswordAuthentication getPasswordAuthentication()
        return new PasswordAuthentication("[email protected]", "password");
}I have also added the certificate to my keystore using the following command and still i am facing this issue.
keytool -import -trustcacerts -alias root -file mail_test_com.crt -keystore keystore.jks
Add to fierof2's Reputation

this is where i created the keystore.jks file
I navigated to the location C:\Program Files\Java\jdk1.6.0_13\bin in command prompt and typed the following command to create the keystore
keytool -import -trustcacerts -alias root -file mail_test_com.crt -keystore keystore.jksI was asked to set the password for keystore and then i was asked the question "Trust this certificate? [no]:" for which i gave yes.
If this is not the right place to create the keystore.jks can you please tell me what is correct location to create the keystore file.

An error occurred sending mail: The mail server sent an incorrect greeting: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE STARTTLS AUTH

Hi, I am receiving emails but whenever I try and send I get the following message:
unable to send emails An error occurred sending mail: The mail server sent an incorrect greeting: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE STARTTLS AUTH=PLAIN AUTH=LOGIN] Dovecot ready..

What are your settings in Tools(or AppMenu/Options)/Account Settings/Outgoing Server (SMTP)? The error message suggests you must have STARTTLS connection security and normal password authentication:
https://getsatisfaction.com/mozilla_messaging/topics/mail_preferences-t1xeq

SMTP send mail message

SMTP send mail message is giving 'unkown mime version' error(error code 16500). The same mail server works when sending by Netscape mail.Any help greatly appreciated.

Hi,
There seem to be a bug in the OGIC_POP.llb\OGIC_POP_ListMessages.vi.
Or at least it needs customization to process the response from each mail server. If you open the diagram for this VI, you'll see that it is using the "+OK\s" regular expression to reach the end of the string before the msg-number, msg-size list. In your case, this string is "+OK 5 messages (6190 octets)"
You need to modify the diagram to skip this whole string. One easy way would be to use just "+OK" with the first Match Pattern fuinction and then use an "\r\n" and pass this to the true-case.
I am attaching a screenshot of this. And I have tested this to work fine -- I get the messages in the array.
Hope this helps,
Khalid
Attachments:
modified_pop_listmsgs.bmp ‏1083 KB

Error while sending mail from SAP

Hello All,
Recently we are facing an error while sending mail from SAP. When we try to compose a message ,it is moving to a dump error RAISE_EXCEPTION.
The details from ST22,
Short text
    Exception condition "FOLDER_NOT_EXIST" raised.
Error analysis
    A RAISE statement in the program "SA
    condition "FOLDER_NOT_EXIST".
    Since the exception was not intercep
    program, processing was terminated.
Kindly suggest..
Thank You,
Regards,
Hasan

Hello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu

Error in sending mail : SMTPSendFailedExcept Client was not authenticated

Hello all,
I am new to the forum,
I have a small program to send mail to Microsoft exchange server.
Now the server is enabled with https option.
Now i am getting error :
com.sun.mail.smtp.SMTPSendFailedException: 530 5.7.1 Client was not authenticated
at com.sun.mail.smtp.SMTPTransport.issueSendCommand(SMTPTransport.java:1668)
at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:1207)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:735)
at javax.mail.Transport.send0(Transport.java:191)
at javax.mail.Transport.send(Transport.java:120)
at SendEmail.main(SendEmail.java:55)
there are two things:
As the program sends mail from a webpage, a user password used for login to the webpage is different from his mail server password, it is not possible to give a username and password to send mail / read mail from the exchange server.
Please give any other option without passing user name and password to the exchange server.

1. Reconfigure the Exchange server to allow sending without authentication.
2. Authenticate to the Exchange server using credentials specific to the web application itself.
Configure the Exchange server to allow the user with those credentials to send mail that appears
to be from any other user.
No, I don't know how to do any of that with Exchange; ask Microsoft.

Urgent:-REP-50152: Error while sending mail

hi
i am using reports10g. i have called a report from a form and destype=mail.
i have already mention the smtp server name in conf. file but still receiving this error
REP-50152: Error while sending mail - Sending failed; nested exception is: javax.mail.SendFailedException: Invalid Addresses; nested exception is: javax.mail.SendFailedException: 550 5.7.1 Unable to relay for [email protected]
thanks

Your smtp server forbids relaying, which is very common. Often a smtp server is configured to send only mails within the same domain without authentication. Otherwise, you need a username and password for the smtp server. I'm not sure if you can configure Reports to send mail through an authenticated server.

Write error. [Error sending mail message to SMTP server. Return code: [].]:

Similar Messages

Maybe you are looking for