"Write Error - Limited User Account"

I get the following message after having worked on a flash
file for a couple of hours:
"An error occured while attempting to write to a file. If you
are logged in with a limited user account, then you may be
attempting to write into another user's folder which is not
supported."
I have a perfectly legit copy of MX Studio 2004 and is
registered and in good standings at Adobe. I saved my file every 15
minutes or so. Now, I can't save it, or do a save as either, plus
the file has vanished. I still actually have it because I have not
closed Flash, but it will be lost once I shut down. The SWF file is
still in my file system, but the FLA file has disappeared.
This has happened to me once before - any idea what's going
on?
Thanks!

sounds like a hard disk error or fragmentation, try saving
the file under a different name (save as...) in a different
directory folder.

Similar Messages

Why don't java applets run when using Firefox 4.0 in a windows limited user account?

Java applications will not run in Firefox 4.0 when the windows user/process only has limited user access rights. The systems, I see this behaviour on have Windows XP Pro SP3, Firefox 4.0 and JRE 1.6.0_24 installed. The java application will run when when full administrative rights are present. This issue did not occur with the 3.6 firefox version that was previously installed.

The problem also exists with the newer Firefox 4.0.1 and Java 1.6.0_25 versions.
Enabling administrative rights resolves the issue ... though this defeats the purpose of using a limited user.
The underlying bug appears to be in the Firefox java plugin detection code. The issue is related to the detection code requiring write access to the HKLM\SOFTWARE\mozilla.org windows registry key. The limited user only has read access for this registry key. The behaviour was identified using the Sysinternals ProcessMonitor utility ... showed firefox calling an interface to create the registry key and getting an access denied response in the limited user case.
A more targeted workaround for the issue is to grant the limited user write access on the HKLM\SOFTWARE\mozilla.org windows registry key. This avoids the need to grant administrative rights to the user and enables the java plugin to be detected. That is, it works on the 2 XP systems where the java plugin wasn't being detected in limited user accounts.

Why won't Fire Fox 34.0.5 restart in limited user account ?

FF 34.0.5 crashed while in the limited user account and won't load when I try and restart it. FF will load and start when I use the admin account with no problem(s). I've uninstalled and re-installed FF 34.0.5 twice but the limited user account still will not restart/load. FF will start in admin account after the re-installs.
When I try and restart/load FF in the limited user account and use Windows task manager to see if FF is loaded, task manager does show FF is loading into memory however the usual FF user interface/display screen does not appear and while the system tries to load FF, FF consumes major portion of memory (up to %99 sporadically). After several minutes FF will display the "error sending screen" but after FF closes, final/exit error message displays that FF was unable to send error details to Mozilla Support.
I'd prefer to try and resolve this problem w/out having to re-install FF from scratch (deleting FF folders, memory registry entries etc. etc. ) because I don't want to lose the current FF configuration (addons, extentions, synch info etc. etc.) I've set up using the limited user account.
I've switched to the Chrome browser temporarily but prefer FF.
Here's the crash report I copied from the "detail" crash report section (please redact email info if possible before posting question) . Thanks :
AdapterDeviceID: 0x2a42
AdapterDriverVersion: 7.15.10.1518
AdapterSubsysID: 145010cf
AdapterVendorID: 0x8086
Add-ons: jid1-ASMu9YBkP688TA%40jetpack:0.2.1,jid0-bbA9VAawX3LMWDu668aUDrpQVXU%40jetpack:1.0.0,%7B6140bbfd-aa20-11e1-aba7-109add603214%7D:1.6.9,%7Bd10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d%7D:2.6.6,jid1-BJLRspk01OAAzg%40jetpack:0.5,jid1-YvCVXxA75Ob1eQ%40jetpack:1.0,jid1-MnnxcxisBPnSXQ%40jetpack:0.2.5,fastestsearch%40mingyi.org:3.31
AvailablePageFile: 2471198720
AvailablePhysicalMemory: 168935424
AvailableVirtualMemory: 140570624
BIOS_Manufacturer: FUJITSU // Phoenix Technologies Ltd.
BlockedDllList:
BreakpadReserveAddress: 48693248
BreakpadReserveSize: 41943040
BuildID: 20141126041045
CrashTime: 1420502879
EMCheckCompatibility: true
Email: p&&&&&j&&&&@gmail.com
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1418173648
JSOutOfMemory: Reported
Notes: AdapterVendorID: 0x8086, AdapterDeviceID: 0x2a42, AdapterSubsysID: 145010cf, AdapterDriverVersion: 7.15.10.1518
OOMAllocationSize: 1
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 33503
StartupTime: 1420502497
SystemMemoryUsePercentage: 94
Theme: classic/1.0
Throttleable: 1
TotalPageFile: 6565580800
TotalPhysicalMemory: 3172098048
TotalVirtualMemory: 2147352576
URL:
Vendor: Mozilla
Version: 34.0.5
Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [UDP/IP] : 2 : 2 :
MSAFD Tcpip [RAW/IP] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [TCP/IPv6] : 2 : 1 :
MSAFD Tcpip [UDP/IPv6] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [RAW/IPv6] : 2 : 3 :
RSVP TCPv6 Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
RSVP TCP Service Provider : 2 : 1 :
RSVP UDPv6 Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
RSVP UDP Service Provider : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip_{D704FED5-D1F5-4859-8B7B-C3DEF3712C72}] SEQPACKET 0 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{D704FED5-D1F5-4859-8B7B-C3DEF3712C72}] DATAGRAM 0 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip_{849F5044-0498-477B-8D72-28EE4D2B3729}] SEQPACKET 3 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{849F5044-0498-477B-8D72-28EE4D2B3729}] DATAGRAM 3 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip_{773EB279-D9E7-4A45-BB64-2F99268E9A53}] SEQPACKET 6 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{773EB279-D9E7-4A45-BB64-2F99268E9A53}] DATAGRAM 6 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{2B5D0F9B-5F42-4471-8299-3D8E5AB93687}] SEQPACKET 5 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{2B5D0F9B-5F42-4471-8299-3D8E5AB93687}] DATAGRAM 5 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{9AA1DCBA-B641-46CA-942D-B1E6F112D0AC}] SEQPACKET 4 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{9AA1DCBA-B641-46CA-942D-B1E6F112D0AC}] DATAGRAM 4 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{A7317EE0-B0B1-4815-861F-E7D47D2038B8}] SEQPACKET 9 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{A7317EE0-B0B1-4815-861F-E7D47D2038B8}] DATAGRAM 9 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{D704FED5-D1F5-4859-8B7B-C3DEF3712C72}] SEQPACKET 1 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{D704FED5-D1F5-4859-8B7B-C3DEF3712C72}] DATAGRAM 1 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{849F5044-0498-477B-8D72-28EE4D2B3729}] SEQPACKET 8 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{849F5044-0498-477B-8D72-28EE4D2B3729}] DATAGRAM 8 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{6D1D7109-DDCC-43CE-AF62-42E679D9253C}] SEQPACKET 2 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{6D1D7109-DDCC-43CE-AF62-42E679D9253C}] DATAGRAM 2 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{773EB279-D9E7-4A45-BB64-2F99268E9A53}] SEQPACKET 7 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{773EB279-D9E7-4A45-BB64-2F99268E9A53}] DATAGRAM 7 : 2 : 2 :
useragent_locale: en-US
This report also contains technical information about the state of the application when it crashed.

Looks like you cleaned up the email before posting, which is good.
Before experimenting further, if you want to eventually restore the last set of windows and tabs you had open before the crash, could you back up your session history files?
Since Firefox is closed, you can access your current Windows user Firefox profile folder by pasting the following into the search box on the Start menu (or the address bar of a Windows Explorer window) and pressing Enter:
%APPDATA%\Mozilla\Firefox\Profiles
From that point, double-click into the most recently updated folder.
''(Note to other readers: if Firefox is currently running, do not exit out, but instead open your current Firefox settings (AKA Firefox profile) folder using either
* ''"3-bar" menu button > "?" button > Troubleshooting Information
* ''(menu bar) Help > Troubleshooting Information
* ''type or paste about:support in the address bar and press Enter
''In the first table on the page, click the "Show Folder" button. This should launch a new window listing your current settings files.)''
(1) Scroll down and double-click into the '''sessionstore-backups''' folder. Copy all files here to a safe location such as your Documents folder.
(2) Go back up to the main level and scroll down to the sessionstore file(s). sessionstore.js usually contains your session data as of the last time Firefox exited normally. In this case, it might not be there. Go ahead and copy any other files whose names start with sessionstore and which have dates in a relevant range to a safe location such as your Documents folder.
By default, Windows hides the .js extension. To work with files most accurately, you may want to turn off that feature. This article has the steps: http://windows.microsoft.com/en-us/windows/show-hide-file-name-extensions
The kinds of files you may find among your sessionstore files are:
* sessionstore.js: the windows and tabs from your previous Firefox session (created when Firefox closes)
* recovery.js: the windows and tabs in your currently live Firefox session
* recovery.bak: a backup copy of recovery.js
* previous.js: the windows and tabs in your last Firefox session, after Firefox starts; sessionstore.bak for pre-33 versions of Firefox
* upgrade.js-''build_id'': the windows and tabs in the Firefox session that was live at the time of your last update; sessionstore.bak-''datetime'' for pre-33 versions of Firefox
Okay, next steps in the next post.

Officejet pro 8500 a909g, limited user accounts can't use printing preferences

The above discription explains most of it. I had install this 8500 printer, then shortly after, uninstalled the other two older printers I was previously using. That is when the problem started. I can not access printing preferences from a document or from control panel\printer and faxes. But I am able to access from the administrater account. I did an online chat with HP help and what we did made sence, but did not work. We went into the security tab in properties and added the limited user account for all permissions and reboted the computer. Did not work!!!! I have a dell laptop, windows xp pro, and the printer software is now uninstalled. the window that pops up when I click on properties is: Function address 0x50085a97 caused a protection fault. (exception code 0x0000005) Some or all property pages may no be displayed. I don not have this problem as an administrater only as a limited user.

I had this similar problem. Installed this printer a few months back and for some time it was printing fine. Recently, I changed the default preferences to black/white, draft, low ink etc etc. Now if I click on the Properties I get this same window:
*** (x50085a97 caused protection fault (exception code 9xc0000005 some or all property pages could not be displayed) ***.
Running XP on an Dell Intel Pentium and it happens irrespective of the application I am using - usually firefox or staroffice. 9 times out of 10 I can't change the properties, but occasionally it allows me too then reverts back. So now I am stuck with everything printing black/white as that's the default I set! Any suggestions welcome.

9.3.0 File association "icon" in XP Pro limited user account problem?

XP Pro SP3 all MS Updates.
Problem occurred after updating Adobe PDF reader to 9.3.0 via the program update feature
File association ok but weird thing is on Limited user account. The icons for a PDF file are not Adobe ones it is a generic one. If I try to open the file it opens with the correct program.
Problem evident on desktop icons and in looking in windows explorer.
If I attach a file in my email program (Outlook Express) it shows the correct icon.
These files were created from various pdf creators. Ofice 2007 Mac SO X 10.4.11 Quartz, Adobe InDesign CS4 (6.0) and InDesigdn CS4 (5.0) so it doesn't seem matter what program created the files.
I am at a loss to figure out how to get the correct icon in the Limited User Account. The correct icons show up in the Admin account. Note the files do open with the adobe reader.
Thanks
Celeste

Gosh anyone out there have any idea how to resolve this? The generic MS icon for the files in the limited user account is annoying as all get out. Anyone out there from Adobe or is this not a monitored forum. Not sure. Thanks
Note: Correct program is accessed just the icons for the PDF files in the limited user account are the generic MS ones.
Celeste

Can I downlaid Firefox on my Administrator account but have it not be accessible to the Limited User Account?

I have Windows XP and want to know if I can download and use Firefox on the Administrator account only and it not be accessible to the limited user account. The reason is is we don't want our kids having access to to more than one tab at a time. any suggestions?

Yes you can,
# locate firefox.exe file in a directory similar to C:/program files/mozilla firefox/firefox.exe
# right click it, select '''properties'''
# add access to your account and remove any entries for other accounts you don't need.
Please let us know whether that works for you.

ThinkVantage Access Connections and Limited User Account (LUA) on XP SP3

Is it really so that one has to be logged on with at least Power User privileges to get the Access Connections utility working properly with 3G/HSDPA? When logging on as a Limited User, the computer can find all the cell phone operators nearby but does not let to do a connect. But when logged on as a Power User, all problems go away.
I would not like to bump up my user privileges from Limited User to Power User, since all else seems to work fine with a Limited User Account. Any ideas about what is going wrong -- or did I just hit into a wall here?
The environment in question is Thinkpad X200 and XP SP3. Access Connections and the HSDPA driver are the latest ones I could find from the Lenovo driver download site (Access Connections v. 5.21, Ericsson HSDPA driver v. 1.0.1046.221).
Would there be any other way to use 3G connections than to use the Access Connections utility (without changing to another o/s)?
--sami

Hi Sami,
I just got stuck on the same problem as you and following is what I found in details fro ThinkVantage Access Connections version 5.30. Hope this helps.
Jakub
<Limited User>
A Limited user can create and apply only modem profiles. However, if
Administrator sets "Allow Windows users without administrator
privileges to create and apply location profiles" option in the
Global settings then the user can create and apply any kinds of
profiles in the system.
Also, a limited user cannot:
1. Edit setting for the Automatic Ethernet and Wireless location
profiles switching.
2. Edit Global settings.
3. Edit profiles created by another user in the system.
4. Renew or release IP in the Diagnostics panel.
5. Export profiles.
The limitations on Power user also apply on Limited user.

Shockwave crashes system in limited user account

I am having a problem with shockwave content playing on my
system. I have followed every single step in this article kb403082,
except for formatting my system and reinstalling windows and
shockwave alone (atomic bomb option). I couldn't do step 5
completely because there is no FlexNet Licensing Service listed.
The problem is that when I am in my admin account everything
runs fine. When I install, play or open an application with
Shockwave content (ie, Bookshelf 2000), everything plays nicely.
When I log into my Limited User Account (Power User option when
created) and either open Bookshelf 2000 or open a website in IE7
with shockwave content then the entire system freezes and I have to
reboot.
I don't understand what it is about the limited user account
that is causing this, but it makes me believe that Shockwave needs
to access some system level component that is blocked in a limited
user account and it is causing the crash.
Thanks for any help,
Sashi
Windows XP Professional SP3 (all latest updates)
Internet Explorer 7
NVIDIA Geforce 8800 GT (180.48 drivers)
ASUS P5N-T Deluxe

Wow, I just fixed my problem. I had the latest drivers for
the video card, but NVIDIA just released a new set on the 22nd. So,
I just downloaded them and installed the new 181.22 and that fixed
it. I don't know if it was the new driver or just the process of
installing the new driver. I wonder what would have happened if I
reinstalled the same 180.48 drivers?
Either way problem solved. Odd.

Database Access in limited user account

I have made an application in which I am communicating with database.
Let me explain about my application first.
1. Application starts and it asks for user name and password
2. After successful login data reading or writing from /to database.
All this information whether its data or user name or password, I am storing in same database but in different tables
Now If I login from limited user then I am able to login by entering user name and password but later I am not able to read/ write to database, but If I login from admin accout then everything runs smoothly.
This happened recently and I am sure this is permision issue..
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet

SQL?? MySQL, MS SQL Server, Oracle SQL, PostgreSQL, SQLLite, .......
ADO driver you use?
versions of SQL server and ADO drivers?
There is obviously some security! If there wasn't any you would not get andy trouble to connect to your server with a normal user account.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Adobe Reader will not run with limited user account.

I am trying to upgrade our Citrix Server Farm, from Reader 8.0 to 9.1, and am running into some issues. First I uninstalled Adobe Reader 8.0 and then installed 9.1 from Adobe's site. Aftter the install completed I was able to run 9.1 without any problems. However today, when some limited users started working, they started getting runtime errors. This only happens with non-administrator user accounts.
the error messages are attached.
After clicking OK, Adobe Reader terminates.
Any insight would be greatly appreciated.

I do believe that I solved my own problem... almost.
http://kb2.adobe.com/cps/404/kb404597.html
"The affected user has a redirected Application Data folder and as a result the network path containing the Application Data uses a UNC path that begins with \\. This UNC path causes Acrobat 9.0 or Adobe Reader 9.0 to incorrectly parse the Application Data path and give the error message."
The article tells me to upgrade to Adobe Reader 9.1... WTF!!! 9.1 is when this problem started, 8.0 worked great! I would stay with 8.0 if I could, but some of our programs require 9.1.

Limited user accounts

When I attempt the following sequence:
system prefs./accounts/'select' user account/limitations/some limits/'select' others/choose "locate"/go to hard drive/'select' application/'select' add.
Then that sequence gets repeated to add more applications for the user to access. Also, the 'applications' I'm selecting are not in the 'applications' folder. They are stored in their own separate folders.
Then I exit System Prefs.
Then I reopen System Prefs. and all the applications I had selected are gone from the 'users' selection, except one.
Any ideas or suggestions or is this too vague?
iMac G3 Mac OS X (10.4.7)

Kate,
Why is your son not able to update the software? Any error messages?
Having a not updated iPod has it's disadvantages but I don't think it physically damages the unit.

Data Buffer error USER_AUTH_FAILED: User account for logonid "SYSTEM"

All, I have the following errors on both the Quality and the Production system in our data buffer job.
com.sap.security.api.NoSuchUserException: USER_AUTH_FAILED: User account for logonid "SYSTEM" not found!
These entries will not process because they are generating an error about the loginid for the Username SYSTEM is not found.
So I am thinking that somehow the MII system is not capturing the correct username when they are being added into the Data Buffer Jobs, or there is something I am overlooking when I set up the databuffering.
Other entries that were in the data buffer jobs were listed as using the RS1000SVC-QMUSBATCH, RS1630SVC-PMIIBATCH User accounts. These are the accounts that our scheduled tasks run under.
Those entries process OK out of the data buffer jobs.
I did notice a similarity between the data buffer jobs in the quality and production systems as it pertains to the following transactions.
Production MII ver 12.0.7 (Build 20)
Muscatine%2FIntegration%2FSAP%2FPROD_CONFIRMED_INPUT_InsertQuery
Which is called from the MIIC1043_IDOC Message Processing Rule.
Muscatine%2FIntegration%2FSAP%2FHEADER_InsertQuery
Which is called from the MIIC1043_Control_Recipe_Download Message Processing Rule.
Quality MII 12.0.11 (Build 14)
Muscatine%2FIntegration%2FSAP%2FPROD_CONFIRMED_INPUT_InsertQuery
Which is called from the MIIC1043_IDOC Message Processing Rule.
So the commonality is that these transactions are being initaiated by the Message processing rules.
Are there known issues with data buffering from transactions initiated with Message Processing Rules?
Is anyone sucessfully using data buffering of transactions called by message processing rules?
Any help is appreciated.
Bob

Jeremy, Thanks for your reply.
There doesn't seem to be much detailed information on the use of Catagories with Processing rules in Help or in the forums. So let me see if I understand your suggestion correctly.
On the MII server create a processing rule for the message using a category instead of using a transaction, The message received by the message listener will be placed in a buffer. I am assuming these messages whould show up in the message monitor and not in the Data Buffer jobs/entries.
So in my transaction which normally processes this data I could add logic to access the message data; using the Message Service (Query, Read, Update and Delete) action blocks. I could pare down the selection by selecting messages based on the MessageCategory that I defined in the message processing rule. This will allow me to access the stored message data.
Finally use a scheduled Job to execute the transaction. The scheduled job would be run with a valid userID and Password so if it connection to the external database failed the enteries would be placed in the data buffer jobs with a valid userID credentials.
Does this sound like what you had in mind?

Error in user account-SU01

Hi,
I am working with SRM5.0. I have observed a problem in accessing an user account. When I try to open the userid in SU01, I get a message:
Internal error - insert in sorted tabl ZADRU
10000000105890000011257INT001AD_DEFAULT
This user is a part of organization structure. Same is the message when I try to open the BP for this user. One change I did was I deleted email address entry from table ADR6 in debugging mode. I suppose since then the problem has arised.
Pls suggest to correct the use account if anybody has come across similar issue?
Thanks & Regards,
Prashant

Hi, Prashant
First find "Person number" and "Address number" from table:USR21S for this user.
Then go to table:ADR6, to find/add this missing entry.
If you are not sure which data should be entered for some unfamiliar field, you canuse a similiar user to compare.
Hope this information is helpful for you.
Rgegards
Lauren

Toshiba Power Saver doesn't work with limited user account

Hello,
this same question was posted in 2006 - not by me - with no successful answer. I try again.
If you create a user with restrictions account (member of the local USERS group) in XP, then he cannot manage either the embedded Windows power options, and the Toshiba Power Saving tool.
I managed, working on file and registry permissions, to have the Windows power options working. But I still can't launch the Toshiba Power Saving tool, it always pop-ups the "you don't have rights" box.
Is there really nothing I can do to work around this?
thanks

I have the exact same problem on my Tecra 9100 (PT910E) just accquired on Ebay with minimum XP Pro SP2 installation.
Akuma I tried to your advice with my Power saver version 5.04.00 (file 20071126153401) without success.
The only way I could find to run Power saver is directly from the icon in the Admin account, or through the console. I could not then find "setup options" only "Details" of the various power schemes. No "Allow Limited User to change settings" box/button anywhere.
Can you clarify further ?
thanks
Ken

Cannot see iPodService.exe from limited user account.

I have a 4th-generation iPod which I am attempting to connect to a computer running Windows XP Pro. I do most of my work under a limited-permission account, running as administrator only to install new software, such as the iTunesSetup.exe installer. However, I am finding that when I connect the iPod to the computer while running as a limited account, the iPod cannot sync, presumably because it can't see the iPodService.exe. The computer does see and can access the iPod as a mass storage USB device correctly, however.
I've done each of the first four R's repeatedly; I'm hoping that I don't have to restore the iPod to resolve this issue.
Thanks in advance.
Gateway CX200 Windows XP Pro

hi eleuthero!
hmmmm. just checking to see precisely where you are in the troubleshooting process. have you checked through these possibilities yet?
iPod for Windows: Fast user switching in Windows XP is not supported
iPod shows up in Windows but not in iTunes
love, b

"Write Error - Limited User Account"

Similar Messages

Maybe you are looking for