WRITE ( f ) TO g .
In the WRITE TO statement,
WRITE (<f>) TO <g>.
code->
<b>DATA: name(10) TYPE c VALUE 'SOURCE_s',
source_s(10) TYPE c VALUE 'XYZ ',
target(10) TYPE c.
WRITE (name) TO target.
WRITE / target.
<i>Output->XYZ ( value of source_s)</i></b>
with this code , i get the output as XYZ - the value of the name field(first) is the
name of the second field, i.e. source_s.
now my question is ->
<b>DATA: name(10) TYPE c VALUE 'SOURCE_s',
source_s(10) TYPE c VALUE 'XYZ ',
xyz(10) type c value 'xyz1',
target(10) TYPE c.
WRITE (name) TO target.
WRITE / target.
<i>output-> XYZ
want output as -> xyz1 without using (source_s)</i></b>
Here we ,specify the name of the field containing the name of the source field in
parentheses.
<b>? --></b> Is there any method other than (source_s) so that i get the output as
xyz1.
This is my first post, so if i am not clear kindly excuse me.
thanks rich,
i tried changing your code to some extent
REPORT ZSSABAP10_1 .
DATA: name(10) TYPE c VALUE 'SOURCE_s',
source_s(10) TYPE c VALUE 'XYZ ',
xyz(10) type c value 'xyz1',
target(10) TYPE c.
field-symbols: <fs1>,<fs2>.
assign (name) to <fs1>.
assign (<fs1>) to <fs2>.
WRITE <fs1> TO target.
WRITE / target.
WRITE <fs2> TO target.
WRITE / target.
so the o/p i get is -
XYZ
xyz1
so i was asking if i could do it through name itself..... now i am working on it... will post soon...
Similar Messages
-
Airport can no longer read or write the configuration of Time Capsule
I have a MacBook Pro running OSX 10.8.3 and maintained with all available patches. I have also a Time Capsule with version 7.6.3 of the firmware. I use AirPort 6.2. So everything seems to be updated with the latest versions.
This has really been a good setup for nearly a year now, but earlier this month Time Machine suddenly stopped to work and could no longer do backups to the Time Capsule. I have tried to factory reset the Time Capsule several times, but I still get problems when writing the configuration to the Time Capsule. I get an error message saying "An error occurred while updating the configuration".
Airport is furthermore not able to detect the Time Capsule correctly anymore, so I have to configure it by entering the IP address. But after setting up WLAN, disks, etc. and enhanching the security, I just receive the error message when I try to write the config. The Internet connection works perfectly anyway, both via cable and wireless.
Anyone got any tips?Do the setup by ethernet in full isolation from the network.
Start from a full factory reset.
I would recommend you take the firmware back to 7.6.1 or even earlier if the TC is older than 12months. 7.5.2 was very reliable. All these bugs started with 7.6 and the change to Lion.
I would also recommend installing 5.6 utility.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0 -
Error while posting a write up for asset belonging to affiliated company
Hi,
I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
Transaction type 790 not possible (posting to affiliated company)
Message no. AA390
I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
Thanks
PragyaHi
According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
Is there any other way, to resolve the issue
Thanks
Pragya -
Issue to write/execute AT-commands for a 3G modem
Dear community,
For the past month, I'm searching for some help on this topic without success, "you are my last hope"
After modification of the PPP parameters under network preferences (according the clear archive from apple support on this topic), the terminal windows is poping up without any problem.
Then... I can't write anything on this terminal !!! The only actions I'm able to perform is cancel or continue button. I also press the Return key as apple support mentioned (issue for 10.2 or earlier), nothing.
The test was done on a early 2010 macbook 13 and the same on a mid 2010 macbook 15, the same issue.
- Am I doing something wrong or mac os restricted this com protocol?
- Is there a way to command the modem trough the main computer terminal (which is working properly)?
Thank you in advance!You've probably solved this problem long ago, but I came across this thread a couple weeks ago when trying to do the same and thought I post this .vi for future users. This code is for a multitech MT5656ZDXV modem, but I think the AT commands are generic enough to be used with any voice modem. Hardware configuration requires and audio cable running from the PC speaker to the modem mic port. Also, I had to use a Konnex Office Konnector telephone line A/D which required me to manually pick up a handset; the software prompts the user to do this. Fancier A/Ds should eliminate the need for this and I have one on order. If you have an analog phone line then there should be no need to use an A/D or manually pick up the phone.
Attachments:
modem_speakerphone.vi 21 KB
Sound Player.vi 17 KB -
Open file in main vi, write in subvi and close in mainvi
Hi,
Im opening a file in the main vi , passing the reference number to the
write to text file which is located in the subvi and passing the refnum
out from this vi to the main vi again to close the file.
But, I always have only the last value of the measurement stored.
Im getting data from the serial port.
what am I doing wrong?
Can someone help me.
Thanks and regards.You probably have forgotten to set the "Write" function to APPEND the data to the file.
This has nothing to do with where you are writing the file. Check the inputs for the write function and make sure you set it up to append.
Shane.
Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2) -
How to create and write in a file
Hello Gurus,
I am creating a file based on the date and time and writing into that. But, I am still getting exception error and all. Kindly, please let me know.
thanks for all the help...j
Error:-
C:\Usage\JavaFiles>java filename "abc"
Exception in thread "main" java.io.FileNotFoundException:Detail09-2003-
03:28:04.doc (The system cannot find the file specified)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:176)
at java.io.FileOutputStream.<init>(FileOutputStream.java:131)
at TowerDetail.main(TowerDetail.java:30)
Code sample:-
import java.io.*;
import java.util.*;
import java.lang.*;
import java.sql.*;
import java.text.*;
public class TowerDetail{
public static void main (String[] args) throws IOException{
String userName = "user";
String passwd = "pwd";
String con_db = "jdbc:odbc:datasource";
String ssn = args[0];
Vector results = new Vector();
Connection con = null;
CallableStatement cstmt = null;
java.util.TimeZone tz = java.util.TimeZone.getTimeZone("EST");
java.util.Date now = new java.util.Date();
DateFormat df = new SimpleDateFormat("MM-dd-yyyy-hh:mm:ss");
df.setTimeZone(tz);
String result = df.format(now);
String fileName = "Detail"+result+".doc";
File inputFile = new File(fileName);
FileOutputStream fos = new FileOutputStream(inputFile);
PrintWriter pw = new PrintWriter(fos);
try{
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
}catch (Exception e) {
System.out.println("JDBC Error: "+e.getMessage());
return;
try{
con = DriverManager.getConnection(con_db, userName, passwd);
cstmt = con.prepareCall("{call dbo.sp_usage_detail(?)}");
cstmt.setString(1, ssn.trim());
ResultSet rs = cstmt.executeQuery();
pw.println("Report "+result);
pw.println("------------------------------------------------------------------------------------
while(rs.next()){
.... write in the file...
pw.println("------------------------------------------------------------------------------------
pw.close();
System.out.println("Your file Detail"+result+".doc is ready!!!");
cstmt.close();
con.close();
}catch(SQLException ex){
System.out.println("SQLException: ");
System.out.println(ex.getMessage());
}catch(NullPointerException e){
System.out.println("Null Pointer Exception: ");
System.out.println(e.getMessage());Now, I got out of the command prompt and reentered. I didn't set any classpath or anything. I have created a subdir \archive in the C:\ and writing an output file [DetailTower.....doc")into that.
The DetailTower.class is in C:\Detail\ProjectClass dirctory.
Now at,
C:\Detail\ProjectClass\java -classpath . DetailTower "abc"
I am getting this error:-
C:\Detail\ProjectClass>java -classpath . DetailTower "999999"
Exception in thread "main" java.io.FileNotFoundException: c:\archive\DetailTower09-10-2003-06:23:40.doc (The system cannot find the file specified)at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:176)
at java.io.FileOutputStream.<init>(FileOutputStream.java:131)
at Detail.main(DetailTower.java:32)
-
How do you create default Read/Write Permissions for more than 1 user?
My wife and I share an iMac, but use separate User accounts for separate mail accounts, etc.
However, we have a business where we both need to have access to the same files and both have Read/Write permissions on when one of us creates a new file/folder.
By default new files and folders grant Read/Write to the creator of the new file/folder, and read-only to the Group "Staff" in our own accounts or "Wheel" in the /Users/Public/ folder, and read-only to Everyone.
We are both administrators on the machine, and I know we can manually override the settings for a particular file/folder by changing the permissions, but I would like to set things up so that the Read/Write persmissions are assigned for both of us in the folder for that holds our business files.
It is only the 2 of us on the machine, we trust each other and need to have complete access to these many files that we share. I have archiveing programs running so I can get back old versions if we need that, so I'm not worried about us overwriting the file with bad info. I'm more concerned with us having duplicates that are not up to date in our respective user accounts.
Here is what I have tried so far:
1. I tried to just set the persmissions of the containing folder with us both having read/write persmissions, and applied that to all containing elements.
RESULT -> This did nothing for newly created files or folders, they still had the default permissions of Read/Write for the creating User, Read for the default Group, Read for Everyone
2. I tried using Sandbox ( http://www.mikey-san.net/sandbox/ ) to set the inheritance of the folder using the methods laid out at http://forums.macosxhints.com/showthread.php?t=93742
RESULT -> Still this did nothing for newly created files or folders, they still had the default permissions of Read/Write for the creating User, Read for the default Group, Read for Everyone
3. I have set the umask to 002 ( http://support.apple.com/kb/HT2202 ) so that new files and folders have a default permission that gives the default group Read/Write permissions. This unfortunately changes the default for the entire computer, not just a give folder.
I then had to add wife's user account to the "Staff" group because for some reason her account was not included in that. I think this is due to the fact that her account was ported into the computer when we upgraded, where as mine was created new. I read something about that somewhere, but don't recall where now. I discovered what groups we were each in by using the Terminal and typing in "groups username" where username was the user I was checking on.
I added my wife to the "Staff" group, and both of us to the "Wheel" group using the procedures I found at
http://discussions.apple.com/thread.jspa?messageID=8765421�
RESULT -> I could create a new file using TextEdit and save it anywhere in my account and it would have the permissions: My Username - Read/Write, "Staff" or "Wheel" (depending on where I saved it) - Read/Write, Everyone - Read Only, as expected from the default umask.
I could then switch over to my wife's account, open the file, edited it, and save it, but then the permissions changed to: Her Username - Read/Write, (unknown) - Read/Write, Everyone - Read Only.
And when I switch back to my account, now I can open the file, but I can't save it with my edits.
I'm at my wits end with this, and I can believe it is impossible to create a common folder that we can both put files in to have Read/Write permissions on like a True Shared Folder. Anyone who has used windows knows what you can do with the Shared folder in that operating system, ie. Anyone with access can do anything with those files.
So if anyone can provide me some insight on how to accomplish what I really want to do here and help me get my system back to remove the things it seems like I have screwed up, I greatly appreciate it.
I tried to give as detailed a description of the problem and what I have done as possible, without being to long winded, but if you need to know anything else to help me, please ask, I certainly won't be offended!
Thanks In Advance!
SteveThanks again, V.K., for your assistance and especially for the very prompt responses.
I was unaware that I could create a volume on the HD non-destructively using disk utility. This may then turn out to be the better solution after all, but I will have to free up space on this HD and try that.
Also, I was obviously unaware of the special treatment of file creation by TextEdit. I have been using this to test my various settings, and so the inheritance of ACLs has probably been working properly, I just have been testing it incorrectly. URGH!
I created a file from Word in my wife's account, and it properly inherited the permissions of the company folder: barara - Custom, steve - Custom, barara - Read/Write, admin - Read Only, Everyone - Read Only
I tried doing the chmod commands on $TMPDIR for both of us from each of our accounts, but I still have the same behavior for TextEdit files though.
I changed the group on your shared folder to admin from wheel as you instructed with chgrp. I had already changed the umask to 002, and I just changed it back to 022 because it didn't seem to help. But now I know my testing was faulty. I will leave it this way though because I don't think it will be necessary to have it set to 002.
I do apparently still have a problem though, probably as a result of all the things I have tried to get this work while I was testing incorrectly with TextEdit.
I have just discovered that the "unknown user" only appears when I create the a file from my wife's account. It happens with any file or folder I create in her account, and it exists for very old files and folders that were migrated from the old computer. i.e. new and old files and foders have permissions: barara - Read/Write, unknown user - Read Only, Everyone - Read Only
Apparently the unknown user gets the default permissions of a group, as the umask is currently set to 022 and unknown user now gets Read Only permissions on new items, but when I had umask set to 002, the unknown user got Read/Write permissions on new items.
I realize this is now taking this thread in a different direction, but perhaps you know what might be the cause of this and how to correct or at least know where to point me to get the answer.
Also, do you happen to know how to remove users from groups? I added myself and my wife to the Wheel group because that kept showing up as the default group for folders in /Users/Shared
Thanks for your help on this, I just don't know how else one can learn these little "gotchas" without assistance from people like you!
Steve -
I know this has something to do with INSERT key in Windows I guess. But suddenly I was using Mac OS X Lion and a keyboard sign appeared in the top bar, and the keyboard didnt work as it usually does. I mean, I wanted the long press key to write multiple caracters of course. Please help!
It's now a hidden option that can be turned on with a terminal command. The easiest way to do this is to download TinkerTool from this site:
http://www.bresink.com/osx/0TinkerTool/download.php5
Then go to Tinkertool > General tab > Select "support key repeat".
Logoff and login again.
Regards,
Captfred -
In iCal and Notifications on a notebook, is it possible to expand the notes window to make it easier to read and write notes? In the past, I have used Outlook calendar and tasks and I was able to expand the windows which allowed me to put a great amount of details into either the notes section in events and tasks. It would be great to be able to do this in iCal and Notifications as well. I am using a Macbook Pro with OS X 10.8. Thank you very much for assistance with this.
HI,
Try Spaces for a virtual desktop.
http://www.ehow.com/how2189851use-spaces-mac-os-x.html
Carolyn -
Write Data storage VI performanc​e issue
I have a program that logs data from mulitple channels. It waits for 500 points from each channel, then saves the data (as a raw 2D DBL array) to file, wait for another 500 points, saves and so on. At the end, I have a raw file. I created a utility VI that would take the raw file and converts it to a tdm file so I can read it in Diadem. The utility VI has a for loop. In each iteration, the loop reads one data segment (the 500-point 2D array), converts the channel data to waveforms and then writes/appends to a tdm file using the Write Data (Channel) storage VI. The VI works fine for small files. But as the file gets larger, the conversion time seems to increase exponentially. Eventually grinding to a halt.
I noticed that each iteration of the for loop seems to take longer and longer. So I suspect the Write Data VI may not be simply appending to the existing channel data. But instead, each time it's probably reading back the waveform data already saved, recombine them with the new data and then rewrite the entire file. This is just a guess.
Anyway, I really need some help resolving the performance issue. Any response will be appreciated. The conversion VI is attached.
S.
LabView 8.0
Message Edited by Seaman008 on 06-01-2007 01:50 PM
Attachments:
Convert2.vi 184 KBHere are two profile captures. Each capture start at the first entry into the inner-most for loop and stop when it exited the loop. Profile2.txt was captured when processing a RAW input file twice the size as in Profile.txt. I'm not familiar with the VIs listed, but it shows that lot of time was spent in _saveDdtAttributes.vi and _saveDDT.vi.
Attachments:
profile.txt 131 KB
profile2.txt 132 KB -
Write a progarm to test two parts at the same time
Hi:
I need to write a program in LabView that is capable of testing two parts at the same time.
Explanation:
I star the test on a unit, once all the electrical test is done move that unit to the pressure test without loosing the current test information and continue the test of the unit thewn generate a serial number only if it passes all the test. Then while the previous unit is going thru the pressure test star testing another unit for the elecrical test and so on.
I am using LabView 2012From what you have described, I agree with what has been answered above. TestStand is specifically designed for. If you would like to provide more information about your application we could give you a more detailed response. For more information about TestStand follow this link
www.ni.com/teststand
Ryan
Ryan
Applications Engineer
National Instruments -
I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed. The burn failed because of a medium write error." What does this mean and how do I fix it?
The disk you are using probably has a defect, not uncommon on consumer grade disks. Try another disk or better yet another disk from a different manufacturer or at least a different batch.
-
Error occurs while activating a 'Write Optimized' DSO.
I am getting error " There is no PSA for infosource 'XXXX' and source system 'XXX' while activating a newly defined DSO object.
I am able to activate a Standard DSOs, however the error occurs while activating a 'Write Optimized' DSOHi,
For write optimised DSO, check if you have tick the uniqueness of the records. If you check that and if there are two same records coming from source in one go, then you will get error
From SAP help
You can specify that you do not want to run a check to ensure that the data is unique. If you do not check the uniqueness of the data, the DataStore object table may contain several records with the same key. If you do not set this indicator, and you do check the uniqueness of the data, the system generates a unique index in the semantic key of the InfoObject. This index has the technical name "KEY". Since write-optimized DataStore objects do not have a change log, the system does not create delta (in the sense of a before image and an after image). When you update data into the connected InfoProviders, the system only updates the requests that have not yet been posted.
Thanks
Srikanth -
Hello -
My client is trying to add $20,000 to an asset that they capitalized last year. We will just add the 20,000 as of 01/01/2008.
When I try to do the write-up (tcode abzu) using transaction type 700, I get an error saying that there is an inconsistency between my company's depreciation areas and transaction type 700.
If i look at my deprecition areas for my chart of depreciatioin, i see we are using several of them. What needs to be configured so this transaction can be allowed?
Thanks for your time!
NatalieHi Vinod -
Thanks for your help and sorry for the delay. Its Christmas in the US right now ... not sure where you are ....
Contact your system administrator (table error)
Message no. AA380
Diagnosis
Inconsistency between the specifications for transaction type 700 and
for the depreciation areas in chart of depreciation BP01.
Depreciation area 32 is defined (in Customizing), so that it is required
to take over values from area 01. However, one of these ares cannot be
posted to, due to the specifications in transaction type 700. This
combination is not allowed.
Procedure
In Asset Customizing, maintain the specifications in transaction type
700 for the depreciation areas that can be posted using this
transaction. -
Posting write-up or unplanned dep?
Hi,
We have an asset for which some more dep (special dep) should have posted in 2008? Option 1 is to post an unplanned dep now. Doing this we will make up for 2008 but we will not get the values correctly for 2009. To get the correct values for 2009, we can post a write-up of amount ( Amt should have been posted in 2008(incl of special dep) - Amt already posted in 2008). But our period control calculates dep at mid year (07/07...). If we change the period control to (01/01..) now, we get the desired ODep for 2009. But if we dont, we get some different value. Can somebody explain why and as to what is happening by posting the write-up now with period control (07/07..at mid year)?
Regards,
DushyantThe period control don't have any thing to do this that is only for determination the depreciatin start date automatecly (exeption is when you have depreciation to the day)
How the depreciation is calculated after a manual corrections is dependend from the depreciation key you use -
UNABEL TO DO WRITE-UP FOR ASSET AS IT IS ASKING FOR COST OBJECT.
Hi
I am unable to do writ-up asset as error message is coming saying that cost element require a cost object assignment.
But in asset master we have cost object assignment.
I have checked my all configuration seems to be correct but i don't know why i am getting the erroe.
Can anyone help me regarding this.Hi
I am giving you the detailed description what error I am getting.
Account 60210 requires an assignment to a CO object
Message no. KI235
Diagnosis
You have not defined a CO account assignment for an account that is relevant to cost accounting.
System Response
Account 60210 is defined as a cost element.
This means that you must always specify a CO account assignment.
Procedure
Enter one of the following CO account assignments
Order
Cost center / cost center/ activity type
Sales order item (for a project or cost relevant)
Project / WBS element
Cost object (Process manufacturing)
*Network/ Network activities*
Business process
Profitability segment
Real estate object
The posting row affected is 0000000002, account 60210.
But in asset master we have done cost onject assignment.
Waiting for quick response.
Edited by: Smruti Mohanty on Nov 14, 2008 11:30 AM
Maybe you are looking for
-
What is the earliest version of Windows supprted?
-
DB Version : 10.2.0.4 When VIP is functional , the CONNECTION REFUSED errors are quickly detected, and transparently the connection request will be transferred(fail over) to the next available IP. If something goes wrong with your VIP , the failover
-
hi! i took black and white pictures in RAW, but in Lightroom i see these only in color. what to do? thank you
-
How can I do this photo slide show
I just ran across this outstanding photo slide show, of Led Zepplin. I want to be able to put this type of slide show on my website with my own images. http://www.time.com/time/photoessays/2007/led_zeppelin/ Can anyone direct me to a tutorial of Flas
-
Can do applets at the Dos prompt but how in JBuilder7 ? HELP ! ! !
Dear People, After two days of successfully doing applets at the Dos prompt I am trying to do a first applet in JBuilder7 Personal Edition I did 1) New 2) applet (double click) 3) renamed the .java file and .html file so the names matched the name of