Write issues using IIS

hi
Every opensource scripts that I try to install, zencart,
opencart and a photo gallery using php and IIS with msql says that
I don't have write permmissions on the config file and when I go to
check the file I do have write permissions.
Also the username and password fields says they don't match
when as far as I can see they do.
Any help on this please as other forums kinda suck. Is there
anything that i'm not checking here?

ottz0 wrote:
> yes, i'm testing both locally and through my webhost.
I've assigned permissions
> in localhost with read / write but it's just iss with no
active directory, so
> for the file iv'e assigned the permissions and with
directory security is my
> IUSR account allowing anonymous login.
>
> On my webhost iv'e clicked on the file and IUSR for that
account and assigned
> the permmisions
>
> so i'm not sure why it's doing this? Is there still
something i'm not doing?
>
If its not working on your webhost too then something is up,
I would
probably ask your host to confirm the settings you have made
for you,
once they have confirmed you have done it right it may be
worth going
back to the creators of the scripts.
Sorry I can't be much more help.
Steve

Similar Messages

Issues using IIS 8.5 with ARR 3.0 as Reverse Proxy for Lync 2013

Dear reader, after searching for a day without finding a solution to my problem I end up here ;-)
Working Lync 2013 environment (gradually adding functionality) consisting of 2 FE servers, Persistent Chat Server, Web Apps server, Edge Server, Reverse Proxy Server (IIS 8.5/ARR 3.0), SQL Server.
Set up a fresh Windows 2012 R2 with IIS 8.5, installed ARR 3.0 and followed along this
TechNet article.
So far so good, external clients (incl. mobile phone apps) can all connect.
Now trying to add Web Apps to the reverse proxy, which is slightly different from the others by not forwarding 80/8080 and 443/4443, but just 80 and 443 to internal Web Apps server.
After creating the server farm/URL rewrite, browsing to the webapps.FQDN/hosting/discovery ends up with a 404 error (instead of XML, which is shown when try from the LAN).
After moving this rewrite rule to the top, it started working, but now my lyncdiscover.FQDN stops working.
Ofcourse moving the webapps rule down restores the lyncdiscover.
Any ideas? (everything setup as described in above mentioned TechNet article, so using wildcards. Tried fiddling around with webext.* and lyncdiscover.* and so, but no luck. (I'm completely new to ARR)
Thanks,
Barry

Can you confirm that for each URL Rewrite Rule, you have an {http_host} record that matches something like webext.* as you referenced above and as seen in step 15 here:
http://blogs.technet.com/b/nexthop/archive/2013/02/19/using-iis-arr-as-a-reverse-proxy-for-lync-server-2013.aspx
It might help if you posted a screenshot of your URL rewrite rules.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Error While performing Budget Write Back using ERPi

Hi,
We are getting the following error while Importing the data for Budget Write back using ERPi.
"va.lang.Exception: Cannot get the olap server name for planning application GSECPLAN
ERPI Process Start, Process ID: 187
ERPI Logging Level: DEBUG (5)
ERPI Log File: C:\Users\HYP_SV~1\AppData\Local\Temp\2\/aif_601_187.log
Jython Version: 2.5.1 (Release_2_5_1:6813, Sep 26 2009, 13:47:54)
[Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)]
Java Platform: java1.6.0_29
Call Servlet - START
Call Servlet - END
ERPI Process End, Process ID: 187"
The Write-back was working fine and we have done the write back successfully few days back. We have not made any changes in write back set up except some mapping.
Any clue on this issue?
Thanks & Regards,
Sunil.

Thanks John for your response.
I have already restarted the planning service and checked. But no luck.
Regards,
Sunil.
Edited by: 926629 on May 7, 2013 12:26 AM

BOE XI 3.1 using IIS

We are building a new BOE XI 3.1 using IIS as the web server, windows AD authentication and Kerberos for SSO. At this point we have run into two issues:
1. we can't configure Windows AD authentication for the CMC login. We would also like to use SSO, but at this point would be happy getting WIndows AD working.
2. SSO does not work for the desktop tools like Universe builder or designer. Windows AD is working but would like to get SSO working as well.
Please let us know if you have been able to configure either of the above in the environment that I describe.
Best Regards,
Kevin Geiger

I don't think any type of SSO will work with the CMC cept maybe siteminder in XI 3.1. AD will work but you will have to configure java AD due to the CMC not running on .net.
Now our Admin guide specifically states that using java kerberos and .net kerberos is not supported on the same server (not that it won't work). It just states that. So there are no docs that show how to set these both up at the same time.
So the doc in the previous post should help with the .net part. Where are you running the CMC? WACS? or tomcat?
Regards,
Tim

Client Certs for just one directory using IIS

I am using JRun 4 and IIS 5 on one site and IIS 6 on another, and am using SSL and requiring client certificates. I have all that working through IIS's site properties but my issue is that I only want to accept client certificates on one directory, in fact I only want the request for the client cert to pop up on that one directory. By setting the JRun.dll to the proper security settings to accept client certificates in IIS, any jsp file will prompt for the cert.
Do I not want to want to use IIS to set up my SSL and client cert request as opposed to doing it in the web.xml? All my research pointed me to do this through IIS. Using IIS, do I need to use another ISAPI Jrun connector? How do I do that?
Can someone tell me a way to get this working for a client cert prompt only for the one directory either though IIS or application security?
Thanks for any input you can provide.

Hello Bill,
I am sorry but I do not have an answer to your issue. It just
happend that I am trying to set up SSL connection between JRUN 4
and IIS 5 using JRUN ISAPI connector. Unfortunately every time I
try to run the "*.jsp" test page I am getting "fetchprops" error
message on JRUN ISAPI connector. Would you be able to give me some
hints as to what could cause this issue. By the way, I am testing
it only with trial version of SSL certificate on IIS.
Thank you

Lync Mobile unable to sign in using IIS ARR

We have a deployment which currently has no issues using an Apache reverse proxy running on Ubuntu. I am working on switching over to a supported reverse proxy, so IIS ARR is the obvious choice. I have configured IIS ARR by following the steps at:
http://uclobby.com/2013/08/02/configuring-arr-for-lync-server/
http://blogs.technet.com/b/nexthop/archive/2013/02/19/using-iis-arr-as-a-reverse-proxy-for-lync-server-2013.aspx
When I try to sign on externally using Lync 2013 Mobile, I get a message saying "An unknown error occured". The Lync Mobile logs show the following error:
Caused by: java.net.ConnectException: failed to connect to /xxx.xxx.xxx.xxx (port 443) after 60000ms: isConnected failed: ECONNREFUSED (Connection refused)
I have even gone as far as opening all the ports to the IIS ARR server on the firewall and disabling Windows firewall on everything.

To fix issue "502 - Web server received an invalid response while acting as a gateway or proxy server.", you can refer below link
http://support.microsoft.com/kb/2455129/en-us
it's assume reverse proxy configuration issue, please check the following things:
Please make sure your internal web service url and external web service url are not pointed to the same FQDN.
Verify you have update the public certifcates including lyncautodiscover URL in the SAN entries for your reverse proxy server
Check the authenticated delegation is set to "No delegation, but clients may authenticate directly"
Please try to enable internal access and see if it works
If still no luck,please enable Lync server logging tool and reproduce the issues,then use snooper to analyze the log for more specific information
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical

Lync Office Web App Farm External Access using IIS ARR

When i try to present a powerpoint app when logged in externally i get an error saying that it could not connect to the office web app server. I need some help with (maybe screenshots) of what the reverse proxy settings should be. Here is some info
so maybe someone can fill in the blanks.
My Office web app server has a private address and sits on the inside. The DNS name is owasrv.mydomain.com
The internal url is https://owasrv.mydomain.com
The external url is https://wacsrv.mydomain.com
i have a public A record pointing to wacsrv.mydomain.com and my ssl cert has a SAN entry for wacsrv.mydomain.com
***NOTE our public and private domain names are the same...that is not a mistake.
I mostly need help with the what to put in for the url rewrite rules and what to put in when creating the server farm. Also is it OK that the name of my server is different than the external url address.
Gerald Csakany

Hi Gerald,
Did you follow this guide here http://blogs.technet.com/b/nexthop/archive/2013/02/19/using-iis-arr-as-a-reverse-proxy-for-lync-server-2013.aspx
and mainly the section down the bottom which refers to publishing the WAC by matching this pattern ((?:^en-us/|^hosting/|^m/|^o/|^oh/|^op/|^p/|^we/|^wv/|^x/).*)
and moving the rule to the top?
What happens when you try to browse to https://wacsrv.mydomain.com/hosting/discovery from external?
They can be different, I usually make them the same for simplicity, but as long as they're set on the Webfarm it shouldn't be an issue.
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)

Using IIS ARR with one Leg

Is it supported to use IIS ARR with server with one network card ?

This one may help.
http://www.iis.net/learn/extensions/configuring-application-request-routing-(arr)
I'd also ask them over here about IIS issues.
http://forums.iis.net/
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

BO XI R2: Cannot access CMC or Admin launchpad using IIS

Greetings,
I've reinstalled Crystal reports to use IIS rather than tomcat apache (also havenu2019t installed any java component as a web server component) to keep in line with another crystal reports installation we have up and running (both servers are windows 2003) with Windows NT authorization configured.
I selected default web page, when i try to access the page:
http://crystalinstall:8080/businessobjects/enterprise115/admin/en/admin.cwr
The message "Internet Explorer cannot display the webpage" is displayed, further diagnosis from IE9 states "Remote device or resource wonu2019t accept the connection"
I didn't have to configure ports so left it at 80:80 as was used by Apache Tomcat previous install, so Iu2019m ruling out the port number and IIS is running and so is the Word Wide Web publishing Service (view under Central Configuration Manager).
I don't have permission to look at the IIS settings on the working server until the infrastructure person is available.
There were no error written in the windows event viewer.
Within IIS manager, I can see crystalreportviewrs115 and businessobjects under the Web Sites folder.
Is further work required to set up IIS with Crystal reports?
Any tips or advice what might be causing this issue?
I had this previously working under Apache Tomcat, had to uninstall due to a company rule to always use IIS for all software and never to use tomcat.
Thanks
Rob
Edited by: RobWhalley on Aug 29, 2011 10:17 PM

Nothing appears in IE on the server when I access http://localhost/
I know IIS is running, I think it maybe to do with the default website which I can see Crystal reports but I'm not 100% they're running or which one should be.
More will be clear when the infrastructure team are back and can allow me to compare IIS settings between servers.

Unable to login into BIP using IIS/Oc4j

Hi ,
we have configured SSO in OBIEE using IIS. and to configure oracle proxy for OC4J followed the steps at below url.
http://gerardnico.com/wiki/dat/obiee/iis
But getting the error when trying to browse the ulr
http://localhost/xmlpserver/login.jsp
Error: Internet Explorer cannot display the webpage
any suggestion pls

When I try:
http://localhost:9704/xmlpserver/
it direct me to BIP login page
http://localhost
Under Construction
The site you are trying to view does not currently have a default page. It may be in the process of being upgraded and configured.
Please try this site again later. If you still experience the problem, try contacting the Web site administrator.
If you are the Web site administrator and feel you have received this message in error, please see "Enabling and Disabling Dynamic Content" in IIS Help.
To access IIS Help
Click Start, and then click Run.
In the Open text box, type inetmgr. IIS Manager appears.
From the Help menu, click Help Topics.
Click Internet Information Services.
http://localhost:9704
It direct me to welcome page for OC4J
any help please..
when I try
http://localhost/xmlpserver/login.jsp
get the error please find the log:-
12/06/12 13:36:22: [op_uri_map.c (129)]: Into op_uri_map_t::uri_map_alloc
12/06/12 13:36:22: [op_uri_map.c (163)]: Into op_uri_map_t::uri_map_open
12/06/12 13:36:22: [op_worker_list.c (37)]: op_worker_list_init: propfile=c:\proxy\proxy.conf p=0x010D4A60 l=0x010D24C0
12/06/12 13:36:22: [op_worker_list.c (45)]: op_worker_list_init: numservers=1
12/06/12 13:36:22: [op_worker_list.c (57)]: op_worker_list_init: inside loop, serverlist[0]=ias1
12/06/12 13:36:22: [op_worker_list.c (73)]: op_worker_list_init: hostname=hrlvmdv1281.emea.hays.loc
12/06/12 13:36:22: [op_worker_list.c (82)]: op_worker_list_init: port=9704
12/06/12 13:36:22: [op_worker_list.c (160)]: op_worker_list_init: tablesize=3
12/06/12 13:36:22: [op_worker_list.c (169)]: op_worker_list_init: lookuptable[0]=/xmlpserver/*, servlist[0]=ias1
12/06/12 13:36:22: [op_worker_list.c (169)]: op_worker_list_init: lookuptable[1]=/xmlpserver oproxy.ias1.urlrule=/bioffice/*, servlist[0]=ias1
12/06/12 13:36:22: [op_worker_list.c (169)]: op_worker_list_init: lookuptable[2]=/bioffice, servlist[0]=ias1
12/06/12 13:36:22: [op_uri_map.c (193)]: op_uri_map_t::uri_map_open, rule map size is 3
12/06/12 13:36:22: [op_uri_map.c (266)]: Into op_uri_map_t::uri_map_open, match rule /xmlpserver/=hrlvmdv1281.emea.hays.loc was added
12/06/12 13:36:22: [op_uri_map.c (266)]: Into op_uri_map_t::uri_map_open, match rule /xmlpserver oproxy.ias1.urlrule=/bioffice/=hrlvmdv1281.emea.hays.loc was added
12/06/12 13:36:22: [op_uri_map.c (301)]: Into op_uri_map_t::uri_map_open, exact rule /bioffice=hrlvmdv1281.emea.hays.loc was added
12/06/12 13:36:22: [op_uri_map.c (313)]: Into op_uri_map_t::uri_map_open, there are 3 rules
12/06/12 13:36:22: [op_uri_map.c (340)]: op_uri_map_t::uri_map_open, done
12/06/12 13:36:22: [op_isapi_plugin.c (765)]: initialize_extension, success!
12/06/12 13:36:22: [op_isapi_plugin.c (459)]: Start of HttpFilterProc
12/06/12 13:36:22: [op_uri_map.c (363)]: Into op_uri_map_t::map_uri_to_host
12/06/12 13:36:22: [op_uri_map.c (443)]: op_uri_map_t::map_uri_to_host, done without a match
12/06/12 13:36:22: [op_isapi_plugin.c (553)]: HttpFilterProc [] is not a proxy url
12/06/12 13:36:22: [op_isapi_plugin.c (459)]: Start of HttpFilterProc
12/06/12 13:36:22: [op_uri_map.c (363)]: Into op_uri_map_t::map_uri_to_host
12/06/12 13:36:22: [op_uri_map.c (443)]: op_uri_map_t::map_uri_to_host, done without a match
12/06/12 13:36:22: [op_isapi_plugin.c (553)]: HttpFilterProc [] is not a proxy url
12/06/12 13:36:22: [op_isapi_plugin.c (566)]: HttpFilterProc ==> SF_NOTIFY_LOG phase
12/06/12 13:36:22: [op_isapi_plugin.c (566)]: HttpFilterProc ==> SF_NOTIFY_LOG phase
12/06/12 13:36:23: [op_isapi_plugin.c (459)]: Start of HttpFilterProc
12/06/12 13:36:23: [op_uri_map.c (363)]: Into op_uri_map_t::map_uri_to_host
12/06/12 13:36:23: [op_uri_map.c (443)]: op_uri_map_t::map_uri_to_host, done without a match
12/06/12 13:36:23: [op_isapi_plugin.c (553)]: HttpFilterProc [pagerror.gif] is not a proxy url
12/06/12 13:36:23: [op_isapi_plugin.c (459)]: Start of HttpFilterProc
12/06/12 13:36:23: [op_uri_map.c (363)]: Into op_uri_map_t::map_uri_to_host
12/06/12 13:36:23: [op_uri_map.c (443)]: op_uri_map_t::map_uri_to_host, done without a match
12/06/12 13:36:23: [op_isapi_plugin.c (553)]: HttpFilterProc [pagerror.gif] is not a proxy url
12/06/12 13:36:23: [op_isapi_plugin.c (566)]: HttpFilterProc ==> SF_NOTIFY_LOG phase
12/06/12 13:36:23: [op_isapi_plugin.c (566)]: HttpFilterProc ==> SF_NOTIFY_LOG phase

Configuring Windows XP to use IIS w/ Kerberos

I need to build a Windows XP SSO solution using IIS 5.1 with Integrated Windows Authentication using Kerberos protocol. IIS will then pass the request over to another application which will need to use a Kerberos JAAS module to authenticate the respective users to the application.
Does anyone have any instructions or tips on accomplishing these set of tasks? I have very limited experience with Kerberos. Any help would be much appreciated.
Note: I've gotten this to work using NTLM, so I would like to know the level of difficulty in making the switch over to Kerberos.
Thanks a lot in advance!
Message was edited by:
YvesG

Because in SAP Help on topics <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/44/0ebf6c9b2b0d1ae10000000a114a6b/content.htm">Single Sign-On with Microsoft Kerberos SSP</a> and
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/44/0ebf6c9b2b0d1ae10000000a114a6b/content.htm">Configuring the Application Server</a>, tell to copyt the gsskrb5.dll file(see SAP Note 595341), to the following directory on the central instance: Drive:\%windir%\system32.
This text let me think that central instance is installed on a Windows Server, but on SAP Help docs I didn't found the specific information that the central instance must be installed on a Windows Server.

How do I set up and use IIS 7.5 in Windows 7

I just bought a new machine and installed Windows 7 RC Ultimate and CS4 on it.
I set up IIS (or at least I think I did) and Inetpub now shows in the directory listing, so it should be there.
Only problem is that I cannot save any files to any site in the Inetpub directory even when logged in as administrator.
I have to manage lots of web sites that use asp, and so need to have the Inetpub facility.
Setting up IIS in Windows 7 is poorly documented, and seems quite complex.
The instructions on Microsoft's technet site for accessing IIS do not work, and so I am at a loss.
Am I to assume that the normal Dreamweaver method of storing files in inetpub/wwwroot/sitefolder is no longer valid?
Whether or not, can anyone tell me how to set up a site in windows 7 that will run an asp site using IIS?

http://forums.iis.net/t/1147354.aspx has the answer to providing acess to folders that are not usually accesible in Windows 7.
Run the following command from an elevated command prompt (right click the "command prompt" icon and select "Run as Administrator").
icacls %systemdrive%\inetpub /grant %userdomain%\%username%:(OI)(CI)(F) /grant %userdomain%\%username%:F
This command will add full access for your user account to the INETPUB directory.
Now the Administrator privileges which you don't have don't matter anymore because your account and not Administrators grant you access.
How obscure can you get?
I assume that changing the folder name from inetpub to whatever other folder you need to access will have the same effect.
All I have to sort out now is how to get the F12 key on my wireless keyboard to run a file when pressed in Dreamweaver - but that is another problem.

Is there an issue using file vault 2 on a Mac fusion drive

is there an issue using file vault 2 on a Mac fusion drive

I'm using that configuration and it works for me. There have been some reports of kernel panics with FileVault and SSD's. The cause is unknown. Chances are you'll be fine, but make good backups.

Goods Issue using BAPI_GOODSMVT_CREATE movement type 541

Hi
According to my requirement I need to do Post goods issue using BAPI_GOODSMVT_CREATE. But I am unable to do PGI . how to consume BOM details if batches are changed. please let me know what values I need to pass to BAPI . give with an example.
Its an urgent requirement.

are you passing batch number to the BAPI?
if not try pass the batch number the rest of the things bapi will take care of.
bi

Post Goods issue using bapi_goodsmvt_create

hi,
Iam trying to do post goods issue using bapi_goodsmvt_create. please let me know what are the mandatory fields to be passed?

hi,
*& Report ZRPT_SUB_KO01GOODSMOVEMENT
REPORT ZRPT_SUB_KO01GOODSMOVEMENT.
PARAMETERS : P_BAG(17) TYPE C,
             P_ZZORG LIKE zaUFK-ZZORG,
             P_MATNR LIKE MARA-MATNR,
             P_WERKS LIKE AUFK-WERKS,
             P_WERK LIKE AFPO-PWERK,
             P_DATE LIKE MKPF-BUDAT,
             P_LGORT LIKE GOITEM-LGOBE.
DATA : BDC_DATA TYPE STANDARD TABLE OF BDCDATA. "internla table for bdc data
DATA : WA_BDC_DATA TYPE BDCDATA .                "work area for bdc data
DATA : T_XMSEG TYPE   MSEG.
DATA : T_XMKPF TYPE MKPF.
DATA : V_BAGS1(17) TYPE C.
DATA : BEGIN OF WA_MB1B,
       ZZGCODE TYPE ZMIGO-ZZGCODE,
       ZZGBAGS TYPE ZMIGO-ZZGBAGS,
       WERKS TYPE AUFK-WERKS,
       LGORT TYPE VBRP-LGORT,
       ZZORG TYPE zAUFK-ZZORG,
       END OF WA_MB1B.
DATA : V_MATERIAL TYPE BAPI2017_GM_HEAD_RET-MAT_DOC.
data : v_date(10) type c.
DATA : T_GOODSMVT_HEADER TYPE BAPI2017_GM_HEAD_01,
       T_GOODSMVT_CODE TYPE BAPI2017_GM_CODE,
       T_GOODSMVT_ITEM TYPE STANDARD TABLE OF BAPI2017_GM_ITEM_CREATE,
       T_RETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
DATA : WA_GOODSMVT_ITEM TYPE BAPI2017_GM_ITEM_CREATE.
DATA : BEGIN OF S_MARA,
       MEINS LIKE MARA-MEINS,
       END OF S_MARA.
DATA : MATERIALDOCUMENT TYPE BAPI2017_GM_HEAD_RET-MAT_DOC.
*FORM GOODSMOVEMENT TABLES T_RETURN
                         USING WA_MB1B LIKE WA_MB1B.
SELECT SINGLE MEINS
               FROM MARA
               INTO S_MARA
               WHERE MATNR = P_MATNR.
   CONCATENATE p_date6(2) p_date4(2) p_date+0(4) INTO V_DATE SEPARATED BY '.'.
    T_GOODSMVT_HEADER-PSTNG_DATE = P_DATE.
    T_GOODSMVT_HEADER-DOC_DATE = P_DATE.
    T_GOODSMVT_CODE-GM_CODE = '04'.
    WA_GOODSMVT_ITEM-MATERIAL =      P_MATNR.                    "'000000000000001556'.
    WA_GOODSMVT_ITEM-PLANT =        P_WERK.                     " '1000'.
    WA_GOODSMVT_ITEM-STGE_LOC =      P_LGORT.                    " '0001'.
    WA_GOODSMVT_ITEM-MOVE_TYPE =     'Z42'.
    WA_GOODSMVT_ITEM-VENDOR =         P_ZZORG.                   "'0000100224'.
    WA_GOODSMVT_ITEM-ENTRY_QNT =      P_BAG.                   " '1'.
    WA_GOODSMVT_ITEM-ENTRY_UOM =     S_MARA-MEINS.
    WA_GOODSMVT_ITEM-ENTRY_UOM_ISO = S_MARA-MEINS.
    WA_GOODSMVT_ITEM-MOVE_PLANT = P_WERKS.
    APPEND WA_GOODSMVT_ITEM TO T_GOODSMVT_ITEM.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
      GOODSMVT_HEADER          = T_GOODSMVT_HEADER
      GOODSMVT_CODE            = T_GOODSMVT_CODE
IMPORTING
    MATERIALDOCUMENT           = V_MATERIAL
TABLES
      GOODSMVT_ITEM            = T_GOODSMVT_ITEM
RETURN                        = T_RETURN.
BREAK shailajaa.
           EXPORT t_return to MEMORY ID '123'.
           EXPORT V_MATERIAL TO MEMORY ID 'MAT'.
            CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
     EXPORTING
       WAIT          = ' '.
*ENDFORM.

Write issues using IIS

Similar Messages

Maybe you are looking for