Write music as on a music sheet with Logic Pro

I was used to work wirh Cakewalk Sonar, utilizing software instruments as piano, organ and drums but controlled by music notification.
Is it possible the work in the same way with Logic?

i'm guessing your referring to the LogicPro9 Exploring LP users manual that came with the App.  i'm going thru the book, LogicPro9 Advanced Music Production, by D Dvorin.
that book shows you in Lesson (Chap) 15 how to clik & drag notes/rests/slurs/Time sig/Key sig/ onto a staff paper.  it's chap on music notation.  it includes Guitar tablature, but i haven't gotten there yet. 
yes, the book comes with a DVD for Apple Pro Training lesson files.  will try to attach pic of the book cover.
good luck.
mp

Similar Messages

  • TS4498 Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and wont to add or tweak it a bit is that possible?

    Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and want to add or tweak it, is that possible? I suppose you would need the original logic folder?

    Yes it is more or less compatible, except the use of 32 bit plugins, which is prohibited from now on. So although you're able to open Logic projects as far as down to v5 I believe, it is advisable to remain for 'adding and tweaking' in your pre LPX environment.
    Have a nice day!

  • Dangerous Music D-box with Logic Pro X

    Hello; I am a D-box user and Love it! I have used it with PT11 and Studio One with no issues. Now I am trying to setup the routing for Logic Pro X and I'm having a heck of a time getting it to work properly. I get sound when in "analog & sum" mode but not in DAW mode. Yes, I have Print track set up, stems etc.. I have searched all over the internet and can't seem to find any help. I did watch Fab's video on YT with Logic 9 but still having issues. Is there someone here that uses a D-box with Logic Pro X that woudl be willing to give me a hand? I also use a U/A apollo interface. Thank you in advance! It would be so much appreciated.
    my email is
    <Edited by Host>

    I have had problems with this exact setup as well, LogicX - Apollo - DBox. All was working fine until a few weeks ago and then no more DAW S/PDIF. So after checking that the Apollo's S/PDIF was OK and checking cables with a volt meter, etc. I decided to send the DBox back for repair because all things pointed to a dead converter in the DBox.
    It turns out they found nothing wrong with the DBox, no problems at all and it is being sent back to me. I will have it set up soon and will post again here my findings. Watch this space.

  • Airtunes Widget to play music from inside Logic Pro

    Hey Guys!
    I've been searching everywhere for a widget that lets you play music out of Logic Pro through Airtunes instead of just from iTunes.
    Any ideas?

    well, if anyone else has this problem i found it here
    http://rogueamoeba.com/airfoil/download.php

  • Musical Typing in Logic Pro 8

    Hi, When I try to use the musical typing in logic pro 8 it plays both the piano and what ever software instrument i have selected. I am wondering how i get rid of the piano part. Thanks in advance!

    Make sure only the track you want to play has the little R (record enable) button active (red).
    JG

  • Control external MIDI synth with Logic Pro X

    I purchaced Logic Pro X to use it as a MIDI-sequencer for my external stagepiano: the Roland RD-700sx including two expansion boards (SRX-04 and SRX-10). I want to make records to create my own music. Before I record it as audio I want to record it as MIDI, because in that form it's easier to make adjustments.
    The RD-700sx is GM-compatible, though the better quality sounds are stored in certain banks, which one can select bij entering a specific number to the MIDI control assignments MSB and LSB. For example: to select the Superior Grand Piano, MSB = 87, LSB = 64 and PC (program change) = 1. To select the 60's E. Piano 2, MSB = 87, LSB = 65 and PC = 5. To select the first tone wheel organ MSB = 112, LSB = 0 and PC = 1. To select the SX Rock Kit (drums) MSB = 86, LSB = 72 and PC = 2. And to select the staccato cello on my expansion board MSB = 93, LSB = 3 and PC = 79.
    I spent a lot of time searching and asking on the internet how to select the desired sounds, but I don't know how to do it. So far I know you have to create a multitimbral MIDI environment and on each of the 16 channels you can assign a bank and enter the values of MSB and LSB. I found this article: Logic Pro/Express 9: Defining Custom Bank Messages - Apple Support
    I understand a part of it, though I have too little experience with Logic Pro X to get the job done. Can someone please explain it to me from the beginning to the end? You would help me a lot!!!

    did you do a firmware update  on 003 ? 

  • USB Interface Not Working With Logic Pro 9

    Hello,
    I've had a Tascam US-1641 for several years now with absolutely zero issues on my old PC. Ever since I upgraded to Mac (early 2011 17 inch Macbook Pro running Snow Leopard) I've had nothing but problems with the US-1641. No matter how many times I uninstall-reinstall the drivers and what USB port I plug it into, whenever I turn on the device and it's connected to my Macbook, it crashes my operating system and it freezes everything I was doing. Logic Pro doesn't load and when it sometimes does (10 minutes later), it immediately crashes when I click anything.
    I've tried several tips to fix it and nothing worked. The most popular choice was select the default input/output in Logic to the system audio, then quit Logic, turn on the interface, then restart Logic. No such luck. I have to reboot my machine at least 5 times, uninstall/reinstall the driver and hope it works to use the interface. I thought it was the operating system, so I upgraded to Mountain Lion and installed the new driver for Mountain Lion, after of course deleting the other drivers and removing all previous data, and it is still giving me the same problems.
    I don't have the money to afford a replacement model or a different interface from a different company, so I'm hoping you guys can help me figure out what exactly it is that's causing the interface to freeze my operating system and crashing my Mac whenever I try to use it. I am getting extremely frustrated at this and as much as I love OSX and Logic, what good is this piece of software if I can't use it? I need help.
    Thank you.

    The problem lies with Tascam and their inability to write stable drivers for OS X...  and isn't anything to do with Logic Pro ..
    As you know, you are not the only person to have had this issue and the reality is, while the 1641 might work fine with  Windows, when it comes to OS X Macs.. it's an entirely different story... depending on the version of OS XS you are running.
    The one tip I have read, that seemed to fix it for most people.. (Though not all) is as follows;
    (Thanks to Paulypaulpaul for this)
    -uninstall your tascam driver 2.10
    -restart
    -install driver 1.03
    -restart
    -plug in your tascam
    -goto where you download your drivers (http://tascam.com/product/us-1641/downloads/), scroll down to the bottom where it says firmware, Download the firmware 1.02 (3rd from top under firmware), install it. your control panal should now read 1.03 for your drivers and 1.02 for your firmware.
    -install drivers 2.10
    -restart
    Follow each of the steps exactly.. including all restarts when indicated..
    ...and good luck...

  • Performance issues with Logic Pro 9

    Hi,
    I'm experiencing quite big performance issues with Logic Pro 9:
    bad midi timing and sync, user interface is kinda slowing and less reactive, ...
    Mac Pro 2x2.26 Ghz Quad, 4Gb ram, early 2009, shipped with 10.5.6 now upgraded to 10.5.8
    Should I upgrade to 10.6.2?
    Thanx

    Hi,
    I'm using the same machine ...
    I never get any performance issues
    I bought my mac in March 2009 and I was ben ready to work in less that 3 days without issue...
    so more details about your setup are required to answare!
    4GB ram???
    I suggest to check your ram!!!
    Ram must be compatible with Xeon Nehalem Try specification!
    if you add 1GB of ram from nor clear manufactor.. i suggest to disconnect the addition 1GB RAM
    G

  • Wha wha pedal work well with GarageBand but don't want to work with logic pro 9.1.8 on my MBPro end 2011

    Install on MacBook Pro end of 2011 with logic Pro 9.1.8 and Apogee GIO interface guitar
    The wha wha pedal work well with GarageBand but not working with Logic Pro
    Only the red light turning on and off at the screnn of the MBPro and on my Apogee GIO (Guitar Interface Midi) switch button but the effect wha wha won't work.
    HOPE YOU UNDERSTAND MY ENGLISH

    Pancenter...
    Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
    I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
    +1 on the UAD stuff....
    Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
    Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
    Thread 32:
    0   libSystem.B.dylib      
    0x94c29afa mach_msg_trap + 10
    1   libSystem.B.dylib      
    0x94c2a267 mach_msg + 68
    2   ...tope.audioplugins.AU.Trash2
    0x667bd57a catch_exception_raise + 250
    3   libSystem.B.dylib      
    0x94c57259 _pthread_start + 345
    4   libSystem.B.dylib      
    0x94c570de thread_start + 34
    That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

  • I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

    I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
    Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
    Ken

    MUYconfundido wrote:
    Pancenter,
    Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
    The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
    Thoughts?
    Thanks,
    Tristan
    Tristan...
    This is what you have, correct?
    http://www.alesis.com/usbmidicable
    This from Alesis..
    "The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
    Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
    My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
    pancenter-

  • Questions about Novation Remote 25SL integration with Logic Pro 8

    Preface: I have to apologize in advance if this seems somewhat confusing. I'm sure some of the terms I'm using are just plain wrong - I'm somewhat of a n00b.
    I have a Novation Remote 25SL configured to use AutoMap with Logic Pro 8 from Novation's website and most things are working well. It's confusing at times because sometimes I find it hard to tell what mode the keyboard is in, but that's ok - it's the least of my worries. Based on what I've seen through reading the manuals and my own experimentation, I have a couple of questions:
    - Despite what the guy at the store told me, I can't seem to figure out how to select different kits from within the SL. For example, if I have a garageband instrument selected on a track - can I use the data/select knob on the SL as it is now, or do I have to program that somewhere, somehow? Or if I have Ultrabeat on a track, can I use the knob to select the different kits/banks?
    - Is there a way to control non-Apple AU plugins like the rest of those which ship with Logic? All the sexy looking ones like Ringshifter, Compressor, Overdrive, etc. It seems odd that Remote will go into Mixer Automap mode and be able to control the certain portions of the instruments, but not the plugins that are automatically loaded into the channel strip when the instrument is loaded.
    - I have a 25 key Remote. In Ultrabeat, I find the key maps miss a chunk of notes between where the drum pads end and where the keyboard starts (or vice-verse). Is there a way to get it so each key has a mapping? 25 keys in Ultrabeat, 25 keys on the board plus 8 drum pads - seems like there's lots of room.
    Thanks in advance for all your feedback.
    Message was edited by: Jason Lixfeld

    Follow-up research:
    Apparently there is a driver conflict between the AlphaTrack and the ReMOTE. So far I have got the ReMOTE working - sort of - in Logic using the following method which was published at Novation's Answerbase:
    1. disconnect the alphatrack.
    2. launch Logic and then turn on the ReMOTE SL.
    3. Go into the Environment window, and add a Monitor Object. Connect it to the Remote SL's ports 2 and 3.
    So far, this seems to at least get MIDI note input into Logic, but the Automap function seems a bit sketchy so far. This will depend on Novation updating Automap and the SL's firmware for Logic 8.
    As noted previously, there doesn't seem to be any AlphaTrack support in Logic 8 yet and it's up to Apple to make it work. They do support their TranzPort product, so with luck there'll be support in the next update.
    I'd really love to use BOTH control surfaces with Logic simultaneously -- the AlphaTrack with the Mixer and plugins, the ReMOTE with Software Instruments. I suppose it might take some interesting mapping but this doesn't seem like that strange a setup -- there are plenty of "mixer surfaces" like the M-Audio one, and the Novation Automap stuff is quite popular....

  • M-Audio 61ES not playing nicely with Logic Pro X!

    The 61ES has been doing some really wacky things: I opened it up out of the box for the first time last night and right off the bat the middle octave of notes on the controller were very quiet compared to the high and low notes on the board. It was like the velocity wasn't working properly on those keys or something. The sounds worked fine in Logic when I pencilled them in. But I was too tired to mess around with it more, so went to bed and figured I'd deal with it in the morning. So this morning, the middle octave of keys seems fine, but the middle G just won't play at all. And many of the notes aren't tracking, or playing- especially during fast passages.
    I pulled up Pro Tools 10 and the 61ES worked fine. So something is going on between the controller and Logic. Anyone have any ideas?
    I'm running it on a MacBook Pro with 10.8.5. And the latest version of Logic Pro X- 10.0.6. Thanks for any advice!

    Try this....
    http://www.noterepeat.com/products/m-audio/usb-midi-controllers/axiom-air-series /269-m-audio-axiom-air-series-setup-with-logic-pro-x
    Also make sure you have installed the latest drivers for the Air and Logic...
    Axiom AIR Mini 32 Hyper Control Logic v1.0.2 (Mac)
    Other that that.. Id contact M-Audio support for further help and advice
    http://www.m-audio.com/support

  • Can I connect every USB-Audiointerface with Logic Pro?

    Hello there,
    please forgive me, if my english isn't so well.
    So, my "problem": I actually informated me over Logic Pro X, and by the provided Audiointerfaces, I didn't saw my Audiointerface.
    But - Can I simply connect a USB-Audiointerface with Logic Pro?
    So, hope you understand me,
    Best wishes, "toasbrot_55" (sorry for that name, i don't know when I did chosen this name)

    All Mac OS compatible audio interfaces work with Logic, and almost all USB interfaces are Mac compatible. So it depends on which interface you have (make and model), and which Mac OS version you use.

  • Can I use digi 003 console with logic pro 10 ???

    I have the new mac pro with new os mavrik and
    I have the digi 003 console work with pro tools 10 perfect
    I want to work with logic pro 10 and I don't know if it work with my digi 003 console
    Please help me

    Hi again Bill,
    Something very strange has happened this morning. I was using Logic and thought 'I'll just plug in the TASCAM again to see if anything happens' and it just worked straight away. This is most peculiar as I didn't do or press anything to make it work. Yesterday when I was trying to get it to work, I closed the program and restarted the computer several times are making adjustmemnts but it just wasn't working at all. It seems a good night sleep has gievn it time to think things through lol.

  • Thunderbolt audio interface with Logic Pro?

    Are we to get a new thunderbolt interface with Logic Pro? Avid released their stuff today!

    re: Thunderbolt
    bill borez wrote:
    They'll be a whole load of them in the not too distant future.
    hehehehe
    http://www.youtube.com/watch?v=kTTSsB92L_s
    at about :48   

Maybe you are looking for