Write - no subject - shows where send should be -please help
When I write an email I cannot send because the message "write - no subject" appears in the SEND box, instead of SEND. This happened 4 or 5 days ago and although I did a restore I cannot shift it. Please help. Thank you. Panderina.
Please test to see if asny addons are causing a conflict.
In Thunderbird
Help > Restart with addons disabled.
when Thunderbird has restarted, try to send email with a subject entered.
If you can send the email, then one of you addons is causing the problem.
Gradually test by enabling one at a time.
Maybe an addon needs to be updated.
Please report back with results.
Similar Messages
-
Whenever I am sending a MSG from my iPhone 4s to friends who don't have I phone or I device my smiley(emoji) seen to be square to them and when they send MSG to me with a smiley my iPhone shows :-) ;-p like symbols. Please help I want to receive smiley from my friend
I think you answered your own question. As your friends phones are not iPhones, but maybe Nokia or Android the smiley will appear as a different character or box. Thew only way to fix this would be to send a basic smile using the basic keyboard so that your friends will receive it as a smile and you will when they reply. Or ask your friends to check if the phones they are using have the emoji type keyboard available and ask them to update their phones. This will show the smiley when they reply to you.
Hope this helps. -
I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mails are not receiving. Mail queue showing Connection refused error. Please help me
Thanks
GIRITry this -> http://support.apple.com/kb/TA38632?viewlocale=en_US
-
I have iPad 4th Generation with iOS 6.1.3 Since my iBooks was updated to version 3.1.1 I cannot open pdf file attachment in my email. When I tap of the attachment, the iBooks icon no longer show itself. Can someone please help?
Thanks for all (Ocean20 & Courcoul) who replied.
Reset the device did not help me but it does triggers me to attempt to resend the PDF file attachment on email--and it works the 2nd time. My problem is now solved.
The Adobe Reader is very helpful--it allows me to scroll through the document easily, unlike iBooks, where I cannot scroll straight up or down. -
I have an ipod touch 4g. I did not have wifi for three days and when I came home my friends said they texted me when i didnt have signal. The messages i received when i did not have signal are not showing up. Can someone please help me?
You said "The messages i received when i did not have signal are not showing up."
How do you know received them?
If the sender got a message that the Messagers were not delivered than they were never delivered and the only way for you to get them is for the sender to resent them -
Protocol layer was unable to send a message - PLEASE HELP !!!!
I have the Z10 and I am unale to reply to, or forward any e-mails that I receive on my corporate e-mail address.
I can create and send new e-mails and I am receiving all my e-mails, but I can not forward or reply which is a basic requirement.
Every time I try I get a message advising that
"Protocol layer was unable to send a message"
Please HELP!!!!!
Antony.....Hi and Welcome to the Community!
There are several public KB articles that deal with that error, depending on your exact circumstances. I suggest you go here:
http://btsc.webapps.blackberry.com/btsc/microsites/microsite.do
Search on your exact error message, then inspect the articles that result from the search to see which apply to your specific situation.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
My phone 5 died and now it wont turn back on or seem to charge at all. I've tried several different charger cords and outlets. And all the phone will do is show the empty battery symbol. please help! Any suggestions are apprecaited!?! thanks
Hello Cooper,
Thank you for the details of the issue you are experiencing with your iPhone 5. I would be concerned too if my iPhone was not powering on. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Ipod will not show up, in iTunes library please help.
Ipod will not show up, in iTunes library please help.
I just updated to the newest version of ITunes well, not just but a few days ago. Anyway I have windows 8, and in ITunes my Ipod 5th gen will not show up. I have tried somethings such as unpluging repluging, going to services and restarting, basiclly everything on yoyutube, none still work. It's ***** to cause I just wanted to put music on my Ipod, if anyone has an idea of what to do please give some suggestions.
Thank you, for trying to help.Hello Stephen19wfwake,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
1. Try the iPod troubleshooting assistant:
If you haven't already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below.
2. Restart the iPod Service
3. Restart the Apple Mobile Device Service
4. Empty your Temp directory and restart
5. Verify that the Apple Mobile Device USB Driver is installed
6. Change your iPod's drive letter
7. Remove and reinstall iTunes
8. Disable conflicting System Services and Startup Items
9. Update, Reconfigure, Disable, or Remove Security Software
10. Deleting damaged or incorrect registry keys
Best of luck,
Mario -
in a document with several sections, in section VIII and IX one cannot select the text of the page foot nor set the pointer in it; so, one cannot write nor change the page foot text. Please help!
Question already asked and answered several times.
It's a bug striking in long documents.
Select a word somewhere higher in the page then use the arrows to reach the wanted insertion point.
Yvan KOENIG (VALLAURIS, France) mardi 23 août 2011 15:44:24
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please :
Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
I'm not able to download apps from App Store. It never downloads and it shows waiting status.can somebody please help me resolve this issue
I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
Try signing out of your account and restart your iPad.
Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again. -
I have got an iPhone MC605J version 6.0 soft bank iphon 4 but unable to use it in India. I am trying to use Airtel sim but the phone is showing invalid sim. So please help me out to unlock it.
No one here can help you, & Apple can't/won't help you. Fact is, there is no way to get that iPhone officially unlocked. Only Softbank can authorize the official unlocking of your phone, but they won't. Softbank does not offer official unlocking for any iPhone.
It is what it is. -
my iphone4 keeps freezing on me and now it will not unfreeze. None of the buttons are responding and my iphone will not show up in iTunes. Please help!
See: If you can't update or restore your iOS device
-
i just got the iphone 4s and my text messages are showing as urgent to others,please help me fix this
As ckuan said, there's no way to mark messages as urgent from the phone. So, either your carrier is doing something and you'll need to contact them or it't something on the other end. Is it just one person who's seeing your texts as urgent? Or everyone?
-
I bought Apple TV3 , it was working fine until today and stopped showing the status light. Please help.
try another cable it's a std cable that most consumer electronic use
if that does not help then I would try to connect it by a microUSB cable to see if I could restore the firmware from a computer running itunes
if that does not help then I would say that the appletv have died -
I try to buy a music video from the iTunes Store but it declined my card and it shows invalided card can you please help me
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
edd125 wrote:
...the iTunes Store but it declined my card
Accepted forms of payment > http://support.apple.com/kb/HT5552
Maybe you are looking for
-
I have Firefox set to automatically look for updates then ask if I want to install them. I do this when convenient (may also need to restrict downloads on another machine when paying for Internet use by amount downloaded) Until recently it did just t
-
User equivalence check failed, both side say other node passed, why?
SPARC Soloris 10, clusterware 11gr1 two nodes cluster checking, both side say itself fail, other side is passed. why? ./runcluvfy.sh stage -pre crsinst -n bclabdb01,bclabdb02 -verbose on node1(bclabdb0): Checking user equivalence... Check: User equiv
-
HR Reporting - Position Hierarchy
All, I am looking to report salaries of all positions in a hierarchy format. The only hierarchy we currently have for HR is Org Unit. Is there a way to report within BW with standard content with this requirement? Example: Supervisor | Supervisor S
-
Process Flow errors in OEM Scheduler
Hi I'm using OWB 10.1.03. I've created 2 process flows that load data from different sources. I have also set up a job schedule on Oracle Enterprise Manager (OEM) that runs a stored procedure. This procedure comprises two steps: (1) Start a loop and
-
If I click to remove office from the Office Test Drive folder will it remove the 'real' version of office I have installed?