Write Number as Text

Does anyone know a function module that takes in a date and writes it out as text?
For example:
06/26/2008
June 26, 2008
I couldn't find one that did what I wanted.
I know that I could easily write one as well but figured there has to be something out there already created (and could maybe even do different languages).
Thanks!

Hi,
Please Have a look at the following Threads you will find the Sample Code.
[date conversion to char format |Re: date conversion to char format]
[convert month 06.04.2008 to APR'08|Re: Hi All, convert month 06.04.2008 to APR'08]
Kind Regards,
Faisal

Similar Messages

CVP Opsconsole: Patterns for RNA timeout on outbound SIP calls - Dialed Number (DN) text box does not take any input

Hi there,
I'm having problems modifying the 'Dialed Number (DN)' text box under 'Advanced Configuration->Patterns for RNA timeout on outbound SIP calls' of the SIP tab in the Cisco Unified Customer Voice Portal 8.5(1) opsconsole. In a nut shell, I need to change the RNA timeout but some reason when typing into the Dialed Number text box, the input is not taken. The reason I want to change this settings is because my ICM Rona is not working with CVP:
https://supportforums.cisco.com/thread/2031366
Thanks in advance for any help.
Carlos A Trivino
[email protected]

Hello Dale,
CVP doesn't allow you to exceed the RNA more than 60 Seconds. If you want to configure the timer for DN Patterns you should do it via OPS console, It would update the sip.properties files in correct way, the above way is incorrect.
Regards,
Senthil

Find a string in a file and write a new text after it

hi
i try to search a string in a small text file. after this position I should write a new text (it is not the end of the text, it could be somewhere between).
I tried to solve this with the StrginTokenizer, but it does not work properly, any other ideas how to solve this?
thanks for your comments
steinfresser

To insert text into the middle of a file you use the process that has been used since the first text editor was invented over 50 years ago:
1. Read the text from the file up to the insert point, and write it to a new file.
2. Write the inserted text to the new file.
3. Read the rest of the text from the file, and write it to the new file.
4. Delete the file.
5. Rename the new file.

Is there an APP to monitor call usage and number of texts sent

Is there an APP to monitor call usage (in minutes) and number of texts sent etc so I can ensure I am keeping within my contract? I am getting my 3GS on Thursday so do not know if the phone has this facility already inbuilt or whether there is an app I can buy to do this for me?
Thank you for any help and info to answer my question.

Unless O2 has an app available via the iTunes app store that provides for this as AT&T does for the iPhone sold in the U.S., I don't believe so.
The iPhone includes a usage indicator for Call Time and Cellular Network Data usage, which can be reset on a monthly basis based on your billing cycle, but there is no usage indicator for the number of messages sent or received.

How to write a unicode text in pdf file

Dear Friends,
I am a beginner in acrobat pdf plug-in development. I was trying to write a unicode text (Tamil text) into pdf file.
Using same api I am able to write english text in time-roman, areal etc fonts. But I am not able to write tamil texts.
The code is as below:
        memset(&pdeFontAttrs, 0, sizeof(pdeFontAttrs));
        pdeFontAttrs.name = ASAtomFromString("Latha");
        pdeFontAttrs.type = ASAtomFromString("TrueType");
        pdeFont    = PDEFontCreateFromSysFont(                                        \
                        PDFindSysFont(&pdeFontAttrs, sizeof(pdeFontAttrs), 0),    \
                        kPDEFontCreateEmbedded);
        pdeText = PDETextCreate();
        PDETextAdd(pdeText, kPDETextRun, 0, (ASUInt8 *)buffer, _tcslen(buffer),
                                pdeFont, &gState, sizeof(gState), NULL, 0, &textMatrix, NULL);
        PDEContentAddElem(pdeContent, kPDEAfterLast, (PDEElement)pdeText);
        PDPageSetPDEContent(pdPage, gExtensionID);
        PDPageReleasePDEContent (pdPage, gExtensionID);
KIndly assume that PDEGraphicsState and PDETextMatrix are set properly set, I am not pasting entire code to avoid complexity.
Thank you,
Safiq

Dear lrosenth,
I went through some codes/suggestions in internet and I found that I need to have cmap file and cid font file for the respective font since pdf doesn't support unicode fonts directly.
Can you help me to know where can I get cmap file and cid font file for tamil language font Latha(TrueType) microsoft font.
Regards,
Safiq

Uploading a text file with unknown number of texts

Hi ,
i have a flat file with around 10,000 record's.
each material number followed by different lengths & unknown number of text's separated by delimiter '$',
that need to be saved using save_text function module.
the file is as follows,
record 1 :     material1$text1$text2$text3
record 2 :     material2$text1$text2$text3$text4$text5$text6$.....
record 3 :     material3$text1$text2$text3$text4$text5
record 4:      material3$text1
- - - - - - - - - - - - so on ....
i created the following structure , to split and save each text separated by '$' , to save in TLINE of save_text function module.
types : begin of ty_file,
              matnr type mara-matnr,
              text1 type string,
              text2 type string,
              text3 type string,
              text4 type string,
              text20 type string,
           end of ty_file.
i have uploaded the file and saved in table it_file type ty_file.
loop it_file into wa_file.
   split wa_file at '$' in to matnr text1 text2 text3 text4 ....... so on.
endloop.
please, suggest me an alternate way to reduce the code, instead of creating a structure like above, so that each splitted text
stores in a single variable and is passed to TLINE of corresponding material, in save_text function module
thanks
viki

Hi,
The flat file contains , material No. followed by it's text , each text sepearted by '$' symbol.
For each material i have to get all lines of text, and passed to tables paramter of save_text.
The Number of text' for each material is varying.
Please kindly suggest me , how many variables i need to create to hold each splitted text and store it in Tline
I wrote the below program assuming that the material number has maximum of 20 texts, it's working fine. But, what if the number of texts exceeds 20.
file :
4907507$ Druckrolle$ Durchmesser: 218 mm$ Länge: 750 mm$ Rollenwerkstoff: 1.4301/1.4541$ Oberfläche: gummiert$ Stärke Gummierung: 10 mm$ Näscher    E 71224$$$$$$$$$$$$$$
1149598$ Tragrolle$ mit Stützringen$ Norm: ähnlich DIN 22112$ Durchmesser: 89 mm$ Mantellänge: 800 mm$ Form der Achsenden: A2$ Achsdurchmesser: 25 mm$ Achsanflachung: SW 18$ Einlegelänge: 808 mm$ Achslänge: 834 mm$ Lagerbezeichnung: 6305$ Anzahl Stützringe Form A: 6$ Anzahl Stützringe Form B: 4$ Anordnung links: 4$ Anordnung mittig: 6$ Anordnung rechts: 4$ Qualität Stützringe: N$ Durchmesser Stützringe: 159 mm$ Anzahl Zwischenhülsen: 7$ Anzahl Schlussscheiben: 2$ Erbö   3111.800.05.68
file upload
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    EXPORTING
      static    = 'X'
    CHANGING
      file_name = p_infile.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME            = gd_file
      FILETYPE            = 'ASC'
     HAS_FIELD_SEPARATOR = 'X'
     HAS_FIELD_SEPARATOR = '$'
    TABLES
      DATA_TAB            = It_data.
loop at it_data into wa_data.
    split wa_data-line at seperator into matnr_txt text1 text2 text3 text4 text5
                                               text6 text7 text8 text9 text10 text11
                                               text11 text12 text13 text14 text15
                                               text16 text17 text18 text19 text20.
    move matnr_txt to wa_material-matnr.
    move text1 to wa_material-text1.
    move text2 to wa_material-text2.
    move text20 to wa_material-text20.
    append wa_material to it_material.
    clear wa_material.
endloop.
loop at it_material into wa_material.
    WA_LINE-TDFORMAT = '*'.
    WA_line-TDLINE = wa_material-text1.
    APPEND WA_LINE TO IT_LINE.
    WA_LINE-TDFORMAT = '*'.
    WA_line-TDLINE = wa_material-text2.
    APPEND WA_LINE TO IT_LINE.
    WA_LINE-TDFORMAT = '*'.
    WA_line-TDLINE = wa_material-text20.
    APPEND WA_LINE TO IT_LINE.
    G_THEAD-TDNAME   = wa_material-matnr. " material number
    G_THEAD-TDID     = pa_id.                           " 'GRUN',
    G_THEAD-TDSPRAS = pa_langu.                " EN
    G_THEAD-TDOBJECT = pa_obj.                   " MATERIAL
    CALL FUNCTION 'SAVE_TEXT'
      EXPORTING
        CLIENT                           = SY-MANDT
        HEADER                        = G_THEAD
        SAVEMODE_DIRECT     = 'X'
      TABLES
        LINES           = IT_LINE
      clear : wa_line, g_matnr.
      refresh it_line.
endloop.
Edited by: jvsvijay on Jul 28, 2011 12:51 PM
Edited by: jvsvijay on Jul 28, 2011 12:53 PM
Edited by: jvsvijay on Jul 28, 2011 12:55 PM

How to output money number by text in java?

How to output money number by text in java?
Example: input: 1234 $
output: one thousand two hundred thirty four dollar.

try this...
import java.text.DecimalFormat;
public class EnglishNumberToWords {
private static final String[] tensNames = {
    " ten",
    " twenty",
    " thirty",
    " forty",
    " fifty",
    " sixty",
    " seventy",
    " eighty",
    " ninety"
private static final String[] numNames = {
    " one",
    " two",
    " three",
    " four",
    " five",
    " six",
    " seven",
    " eight",
    " nine",
    " ten",
    " eleven",
    " twelve",
    " thirteen",
    " fourteen",
    " fifteen",
    " sixteen",
    " seventeen",
    " eighteen",
    " nineteen"
private static String convertLessThanOneThousand(int number) {
    String soFar;
    if (number % 100 < 20){
      soFar = numNames[number % 100];
      number /= 100;
    else {
      soFar = numNames[number % 10];
      number /= 10;
      soFar = tensNames[number % 10] + soFar;
      number /= 10;
    if (number == 0) return soFar;
    return numNames[number] + " hundred" + soFar;
public static String convert(long number) {
    // 0 to 999 999 999 999
    if (number == 0) { return "zero"; }
    String snumber = Long.toString(number);
    // pad with "0"
    String mask = "000000000000";
    DecimalFormat df = new DecimalFormat(mask);
    snumber = df.format(number);
    // XXXnnnnnnnnn
    int billions = Integer.parseInt(snumber.substring(0,3));
    // nnnXXXnnnnnn
    int millions = Integer.parseInt(snumber.substring(3,6));
    // nnnnnnXXXnnn
    int hundredThousands = Integer.parseInt(snumber.substring(6,9));
    // nnnnnnnnnXXX
    int thousands = Integer.parseInt(snumber.substring(9,12));
    String tradBillions;
    switch (billions) {
    case 0:
      tradBillions = "";
      break;
    case 1 :
      tradBillions = convertLessThanOneThousand(billions)
      + " billion ";
      break;
    default :
      tradBillions = convertLessThanOneThousand(billions)
      + " billion ";
    String result = tradBillions;
    String tradMillions;
    switch (millions) {
    case 0:
      tradMillions = "";
      break;
    case 1 :
      tradMillions = convertLessThanOneThousand(millions)
      + " million ";
      break;
    default :
      tradMillions = convertLessThanOneThousand(millions)
      + " million ";
    result = result + tradMillions;
    String tradHundredThousands;
    switch (hundredThousands) {
    case 0:
      tradHundredThousands = "";
      break;
    case 1 :
      tradHundredThousands = "one thousand ";
      break;
    default :
      tradHundredThousands = convertLessThanOneThousand(hundredThousands)
      + " thousand ";
    result = result + tradHundredThousands;
    String tradThousand;
    tradThousand = convertLessThanOneThousand(thousands);
    result = result + tradThousand;
    // remove extra spaces!
    return result.replaceAll("^\\s+", "").replaceAll("\\b\\s{2,}\\b", " ");
   * testing
   * @param args
public static void main(String[] args) {
    System.out.println("*** " + EnglishNumberToWords.convert(0));
    System.out.println("*** " + EnglishNumberToWords.convert(1));
    System.out.println("*** " + EnglishNumberToWords.convert(16));
    System.out.println("*** " + EnglishNumberToWords.convert(100));
    System.out.println("*** " + EnglishNumberToWords.convert(118));
    System.out.println("*** " + EnglishNumberToWords.convert(200));
    System.out.println("*** " + EnglishNumberToWords.convert(219));
    System.out.println("*** " + EnglishNumberToWords.convert(800));
    System.out.println("*** " + EnglishNumberToWords.convert(801));
    System.out.println("*** " + EnglishNumberToWords.convert(1316));
    System.out.println("*** " + EnglishNumberToWords.convert(1000000));
    System.out.println("*** " + EnglishNumberToWords.convert(2000000));
    System.out.println("*** " + EnglishNumberToWords.convert(3000200));
    System.out.println("*** " + EnglishNumberToWords.convert(700000));
    System.out.println("*** " + EnglishNumberToWords.convert(9000000));
    System.out.println("*** " + EnglishNumberToWords.convert(9001000));
    System.out.println("*** " + EnglishNumberToWords.convert(123456789));
    System.out.println("*** " + EnglishNumberToWords.convert(2147483647));
    System.out.println("*** " + EnglishNumberToWords.convert(3000000010L));
     *** zero
     *** one
     *** sixteen
     *** one hundred
     *** one hundred eighteen
     *** two hundred
     *** two hundred nineteen
     *** eight hundred
     *** eight hundred one
     *** one thousand three hundred sixteen
     *** one million
     *** two millions
     *** three millions two hundred
     *** seven hundred thousand
     *** nine millions
     *** nine millions one thousand
     *** one hundred twenty three millions four hundred
     **      fifty six thousand seven hundred eighty nine
     *** two billion one hundred forty seven millions
     **      four hundred eighty three thousand six hundred forty seven
     *** three billion ten
}

Is there any way to link page number with the reference page number within text in InDesign CC and CS6?

Is there any way to link page number with the reference page number within text in InDesign CC and CS6?

You should ask in InDesign
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

How to Write BUFFER & Read TEXT with Encrypt file ?

I'm using Windows Phone 8.1 RT.
I have a issue :
- I write a BUFFER encrypted to file. After, I read file with TEXT. It's throw exception : No mapping for the Unicode character exists in the target multi-byte code page. (//ERROR 2)
- I write a TEXT encrypted to file. After, I read file with BUFFER. It's throw exception : The supplied user buffer is not valid for the requested operation. (//ERROR 1)
Code Write Buffer & Read Text.
//Write Textstring msg = EncryptText.Text;
//ERROR 1 - Use 1 or 2
await WriteTextAsync(this.file, msg);
//ERROR 1
//Read Buffer
string msg;
//ERROR 1 - Use 1 or 2
IBuffer buffer = await ReadBufferAsync(this.file);
StreamReader stream = new StreamReader(buffer.AsStream());
msg = stream.ReadToEnd();
//ERROR 1
Code Encrypt-Decypt.
public static string EncryptString(string msg)
var bufferMsg = CryptographicBuffer.ConvertStringToBinary(msg, BinaryStringEncoding.Utf8);
var bufferMsgEncrypted = Encrypt(bufferMsg);
var msgEncrypted = CryptographicBuffer.EncodeToBase64String(bufferMsgEncrypted);
return msgEncrypted;
}public static IAsyncAction WriteTextAsync(IStorageFile file, string msg)
return FileIO.WriteTextAsync(file, EncryptString(msg));
public static IBuffer Decrypt(IBuffer bufferMsg)
var key = CreateKey(KEY);
var aes = SymmetricKeyAlgorithmProvider.OpenAlgorithm(SymmetricAlgorithmNames.AesCbcPkcs7);
var symetricKey = aes.CreateSymmetricKey(key);
var bufferMsgDecrypted = CryptographicEngine.Decrypt(symetricKey, bufferMsg, null);
return bufferMsgDecrypted;
}public static IAsyncOperation<IBuffer> ReadBufferAsync(IStorageFile file)
var buffer = FileIO.ReadBufferAsync(file);
Task<IBuffer> result = Task.Run<IBuffer>(async () =>
var Buffer = await buffer;
return Decrypt(Buffer);
return result.AsAsyncOperation();
Link demo code :
https://drive.google.com/file/d/0B_cS3IYO936_akE0cmI4bExJMjh0RU9qR3RvWDBWWElZWC1z/view?usp=sharing

Please provide a working app so this can be tested. You can upload to OneDrive and share a link here.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Administrators unable to write to a text file created by another Administrator on Windows Server 2008.

Why are Administrators unable to write to a text file created by another Administrator on Windows Server 2008?
--- The Administrators already have full control so how do I fix this? ---
Example: On a Windows Server 2008 (SP1): user A (who belongs to the Administrators group) logs in and creates a directory C:\foo and creates a file readme.txt in the foo directory. User B (also a member of the Administrators group) logs in and opens C:\foo\readme.txt in notepad. User B types something and tries to save the file. User B cannot save the file…an option to save as some other file name is presented. The security permissions of C:\foo\readme.txt show that Administrators have full control.
Work around 1: Explicitly add user B to have full control over the foo directory. The problem is that all the all other Administrators still need to be added (current and future).
Work around 2: Change the Users security permission to be full control on the foo directory. (this seems dangerous!)
It is interesting to not that this same procedure is not a problem in Windows Vista. (Any insight about the difference?)
Sincerely,
Ian

so there is no way to change this without literally shutting down the UAC?
I have files that I need to modify all the time, and it is very annoying to have to save as to my desktop modify and then copy and paste the file again.
I would also rather not give myself permissions to the entire C:\ Drive even specified Folders or documents, etc......
You can change these settings without bringing down the UAC

1.    Click Start, type gpedit.msc and press Enter.
2.    Expand Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options.

3.    Double-click “User Account Control: Behavior of the elevation prompt for administrators in Admin Approval Mode” on the right pane.
a.    Choose “Elevate without prompting” and click OK.
b.    Double-Click “User Account Control: Admin Approval Mode for the Built-in Administrator account”, Click Enable, Apply and then OK
c.     Double-Click “User Account Control: Run all users, including administrators, as standard users”,Click Enable, Apply and then OK
Then reboot the Server. You should now have the ability to modify any document, etc....

Write data to Text file - Column by Column

Hi,
I want to write a table of data(2D) to a text file. I acquire 1D array(6 lakh rows) of data & want to write that in text file as column 0. And next 1D array to the same text file as column 2. Is it possible todo that?
I don't want to accumulate 2D array and write at last since it consumes more memory & Labview Hangs.
Kindly share your ideas.....
Labview 8.2
Regards,
Raja

HI,
I hope this works for you but this vi doesnt hanged my PC or Labview. Please check with it and let me know.
Regards,
Gita
Message Edited by AutoTEC on 10-17-2008 04:15 AM
Attachments:
Write column by column.vi ‏1398 KB

How to write data to text file using external tables

can anybody tell how to write data to text file using external tables concept?

Hi,
Using external table u can load the data in your local table in database,
then using your local db table and UTL_FILE pacakge u can wrrite data to text file
external table
~~~~~~~~~~~
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_7002.htm#i2153251
UTL_FILE
~~~~~~~~~
http://download-east.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_file.htm#sthref14093
Message was edited by:
Nicloei W
Message was edited by:
Nicloei W

I got a new ipod touch and when I went to text it used my Dad's number. I want to use our family's itunes account (for music etc) but have my own id/number for texting. What do I do?

I got a new ipod touch and when I went to text it used my Dad's number. I want to use our family's itunes account (for music etc) but have my own id/number for texting. What do I do?

See:
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime
You will not have a phone number, only an email address.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage

What is the maximum number of text characters

Probably has been asked before, but what is the maximum number of text characters that can be used in a song title and still be burned to a disk. TIA

Are the files tucked away in some deeply nested folder. I've not used Toast (being a PC) but my experience of other burning software suggests that it is usually designed to truncate the filenames to meet the specification of the format it is using. Also I believe "Red Book" is the audio standard so the output will simply be a number of audio tracks with the accompanying index. Filenames on the output end should be irrelevant, unless you've enabled CD Text which is not Red Book standard, and again Toast should enforce any field limits. Perhaps Toast is having trouble reading the files rather than a problem writing them. I assume the files are on an internal drive and you are not trying to burn DRM'd files.
Use a rewritable disc and clone a small audio file multiple times, giving them filenames of 40,45,50,55 etc. characters then try to burn them in a list of increasing length of filename - see which one Toast hangs on.
tt2

Text flow into one or two column text boxes depending on the number of text lines

Question InDesignCS3
Is it possible to let text flow into one or two column textboxes depending on the number of text lines?
Example 1)
--Default text box--|
| Text line 1 |
| Text line 2 |
| Text line 3 |
| Text line 4 |
------------------- |
If there are more than 4 text lines in the in the text box, this box has to become a two column box. like example 2
example 2)
|Text line 1 | Text line 4 |
|Text line 2 | Text line 5 |
|Text line 3 | Text line 6 |

if (myTextFrame.lines > 4) {
myTextFrame.textFramePreferences.textColumnCount = 2;
} else {
myTextFrame.textFramePreferences.textColumnCount = 1;

Write Number as Text

Similar Messages

Maybe you are looking for