Write off reversal

Hello,
Is it possible to reverse write off? Is there any transaction for write off reversal? I used FP04 to post write off document.
Basically I want to cancel and rebill that particular customer whose account has already been written off.
Regards,
James.

Hi ,
There is no standard transaction for writeoff reversal .
It is only the document that you can reverse through FP08 .
Regards ,
Dewang T

Similar Messages

  • Event for reversing the write off document

    Hi All,
    Can anyone suggest me the event that I should enhance for our requirement which is when a incoming payment comes in system should first check whether there is any write off document and if there is then write off document should be reversed and the incoming payment should be assigned to that particular item.
    thanks in advance.

    Thanks for Reply, event 0020 gets triggered but when i use BAPI_CTRACDOCUMENT_REVERSE it throws a short dump or gets into an endless loop.
      MESSAGE_TYPE_X   
    Diagnosis                                                         
        The message previously issued was sent at a time that is not  
        permitted. Changes to the database that belong together logical
        must not be interrupted through dialogs because otherwise     
        inconsistent data may be created. In this case, you attempted t
        output message >3 137.                                        
        The text of the message was                                   
        No interest information exists for document 81000050960       
    System Response                                                   
        The system stops the posting.                                 
    Procedure                                                         
        Contact your system administrator.                            
    Procedure for System Administration                               
        If the program error occurred during a:                       
        o   Standard SAP program, create an OSS message.              
        o   Customer-developed program, correct the program.          
    Please respond if any ideas.
    Thanks,
    Immanuel

  • Events to reverse write off at Incoming Payments

    Hi All,
    I Have a requirement  requirement which is when a incoming payment comes in system should first check whether there is any write off document and if there is then write off document should be reversed and the incoming payment should be assigned to that particular item. Please could anyone suggest me any events
    Thanks,
    Immanuel

    THank you Kamala...Amount is max amount. but do you know what are these figures in for
    TOl group for emploees
    Revenue 5, 2%
    Expense 5, 2%
    Current Configuration for Tolerance Group for Customers/Vendors is
    Permitted Payment DIfference
    Gain 5, 10%
    Loss 5, 10%
    so if my invoice is $100 and i receive payment for 95....i know that the 5 means that 5 is diff allowed but what about the 2 and 10%.

  • SAP IS-Media: Mass write-off leads to reversal of already paid billing document

    Hi All,
    We have business issue in IS-Media as below
    While doing mass write-off using transaction code FP04M, already existed payment document for that particular cycle is getting reversed.
    we can see payment reversal document under liability account - payments tab of the order.
    We know this is not specific to particular customer.
    We would like to understand why while doing write off, already existed payment document is getting reversed. We request experts to help us on this at the earliest.
    Looking forward to hear from you.
    Regards,
    Muneendra

    Hi Tim,
    Thank you very much for your answer. When we run the monitoring process program RJKREMIND01, the system generates reversal billing documents to reverse billing documents from orders that have not been paid. This happens when the orders are in the closure monitoring level. The reversal document set in customizing isn't suitable in this case due to fiscal reasons, so we need to change the reversal billing document when we run RJKREMIND01.
    Thanks and regards, Renato

  • Project Billing "write-off" options

    I'm attempting to determine the best method of "writing off" transactions on direct projects that have been reported as billable, accrued revenue but will never be billed. Please consider the following narrative as an example:
    A consultant (consultant x) charges April time and expense to project 10001 in a billable capacity (charged transactions to a billable task). The transactions are cost distributed, revenue distributed and an invoice is subsequently produced. All cost and revenue transactions are produced, interfaced and ultimately posted to the general ledger in April. The month of April is closed in PA and the invoices for the April billing cycle are produced. Project 10001's draft invoice includes those charges reported by consultant x and is distributed to the project manager for approval. The project manager reviews the invoice review and determines that consultant x's transactions will never be billed and instructs the accounting group to write off the transactions.
    Challenge: we need a way to "write-off" (reduce revenue and change billing status) transactions that will allow for consistent reporting and measurement. Specifically, we need to be able to determine all write-off's (revenue/billing reductions) in a given period that relate to original transactions from an earlier or different period. In short, we want to establish a policy and procedure for consistently processing and reporting these types of conditions.
    Proposed Options:
    1) use the "special" non-billable adjustment option from either expenditure inquiry or invoice review to change the billing status from billable to non-billable.
    Pros:
    a) transactions will remain on the project in the capacity they were reported by the employee
    b) an adjustment record will be created in the PA_Expend_Item_adj_Activities table which will include the adjustment activity code (i.e. Billable Reclass, Non-billable reclass, billing hold, billing hold release, etc.)
    c) history of who created original transactions and adjustments is available (full audit trail)
    d) a reversing revenue entry will be created in the PA_Cust_Rev_Dist_Lines_all table which will allow us to track the dates (gl period) of the revenue adjustment and compare it to the original transaction dates.
    Cons:
    a) to the average users the transaction on a billable task flagged as non-billable with no corresponding revenue may look unusual because there is no description explaining why the adjustment existed. the only way to determine that revenue existed and was subsequently reversed is to look at item details- revenue details.
    b)The revenue write-off will be charged to the same accounts (revenue and inventory) that the original transaction was booked to but in reverse. we don't have the ability to deflect the "write-off" to a bad debt account versus a direct write-off of revenue.
    c) The employee's utilization calculations will be impacted by changing the billing status of the transactions and reducing the corresponding revenue. we may need to update the utilization report to reflect these types of transactions differently.
    2) use the "special" transfer adjustment option to transfer the transaction from the originating billable task to a non-billable destination task on the project in question.
    Pros:
    a) the average user will easily see that the transaction in question has been reversed and b) the revenue subsequently written off by the negative revenue on the reversal transaction
    c) an adjustment record will be created in the PA_Expend_Item_adj_activities table which will include the applicable adjustment activity code(s) (Transfer Back-out, Transfer Originating, Transfer Destination).
    d) history of who created original and adjustments is available.
    a reversing revenue entry will be made via e) the negative reversal entry created in the PA_Cust_Rev_Dist_Lines_All table.
    Cons:
    a) the original transaction is being altered (transferred) by accounting. the integrity of the transaction as it was submitted by the source employee may be compromised.
    b) there is no easy way for the average end user to know where the transaction was transferred to. the information is available via ad hoc reporting from database tables but looking at expenditure inquiry for a given project you will not be able to determine where the transaction went if it was transferred to another task and many tasks exist or if it was transferred to another project entirely.
    c) The revenue write-off will be charged to the same accounts (revenue and inventory) that the original transaction was booked to but in reverse. we don't have the ability to deflect the "write-off" to a bad debt account versus a direct write-off of revenue.
    d) The employee's utilization calculations will be impacted by changing the billing status of the transactions and reducing the corresponding revenue. we may need to update the utilization report to reflect these types of transactions differently.
    e) As a common practice, each project will need at least one "non-billable" task to capture such write-off transfers.
    3) use a write-off event (both revenue and billing) to reduce the project by the aggregate amount of all transactions in question.
    Pros:
    a) employee specific transactions and ultimately utilization results will not be impacted by the independent event transaction.
    b) by modifying our autoaccounting rules we will be able to book the "write-off" to an account other than a revenue account. (I believe, more research necessary)
    Cons:
    a) No link back to actual transactions.
    b) original transactions will remain untouched and will appear as though they were billed and will show up on the invoice and detail reports to the client along with an aggregated event for the total write-off amount.
    Any thoughts or opinions you can provide about the best practice in Oracle will be greatly appreciated.
    null

    Diana,
    Here's another response from a (very) senior Projects consultant. Her comments are in CAPS, so they can be dinstinguished from your comments:
    "I recommend following the approach she outlines in Section 2, with the following additions:
    SECTION 2) use the "special" transfer adjustment option to transfer the Transaction from the originating billable task to a non-billable Destination task on the project in question. CORRECT.
    A) SET UP THE WBS TO HAVE A TOP LEVEL NON-BILLABLE TASK, ON EVERY PROJECT, WITH A TASK NUMBER OF :"WRITE-OFF".
    B) WRITE AUTOACCOUNTING RULE , BASED ON TASK NUMBER, TO ENSURE THAT ANY TRANSACTIONS CHARGED (TRANSFERRED) TO "WRITE-OFF" TASK WILL BE POSTED TO A "WRITE-OFF/BAD DEBT" ACCT IN GENERAL LEDGER.
    C) CREATE A DFF AT THE EXPENDITURE ITEM LEVEL WHICH CAN BE POPULATED AT THE TIME OF TRANSFER, TO INDICATE WHERE THE TRX IS BEING TRANSFERRED TO. IT IS TRUE THAT TRANSFER ACTIVITY REPORT WILL TELL YOU THIS AS WELL, BUT IF YOU
    WANT TO SEE IT ONLINE DURING EXPEND. INQ, THEN DFF IS FINE.
    D) AS TO CONCERNS ABOUT "THE INTEGRITY" OF THE TRANSACTION AS IT IS SUBMITTED BY THE EMPLOYEE BEING COMPROMISED, THIS IS CERTAINLY POSSIBLE, BUT IF THIS IS A SERIOUS BUSINESS CONCERN, THEN I WOULD CONSIDER CREATING AN ALERT TO THE EMPLOYEE WHO ENTERED THE ORIGINAL TRX, ADVISING THEM OF THE CHANGE AND REQUESTING THEIR REVIEW AND OR APPROVAL OF THE TRANSFERRED TRX. I CAN SEE THIS BECOMING QUITE CUMBERSOME THOUGH, AND, OVERALL, ACCOUNTING DEPARTMENTS MANIPULATE TRANSACTIONS FOR ACCOUNTING PURPOSES ALL THE TIME AS STANDARD PRACTICE, SO I'M NOT SURE WHY THIS IS AN ISSUE HERE.
    E) AND LASTLY, IT IS TRUE THAT AS A COMMON PRACTICE, EACH PROJECT WILL NEED A
    'WRITE-OFF" TASK AS A STANDARD PART OF IT'S WBS-- SO WHAT? IT'S JUST ONE MORE TASK IN YOUR WBS. BUILD IT INTO YOUR PROJECT TEMPLATES, AND MAKE IT NOT CHARGEABLE UNTIL WRITE OFFS BECOME NECESSARY. AS TO UTILIZATION, THERE IS NOT ENOUGH INFO IN THE CLIENT QUESTION TO ADDRESS THAT ISSUE PROPERLY.
    THAT'S ABOUT IT. HOPE THIS HELPS.
    BEST REGARDS, PAT"
    null

  • Write off

    Ability to offset auto write off.
    We need to see if a write-off payment comes back from the patient say after a year.  If customer pays back after write off is done. we want to reverse write off.
    Thanks
    Nik

    Configuration is available only for creating reserve for bad debts, probably this is more a common across the industry. This is done through OB04 and OBXD. There is nothing specific for writebacks. Only thing you may want to ensure it if you set the config for reserve for bad debts, make that GL account also to Supplement auto posting. Whe you receive the money back from the written off customer, the bank statement import would probably post to the customer account 'on account". You can use F-30, 'transfer with clearing' transaction to remove the credit from the customer and credit the provision account.

  • Tax relief - Bad debt write off

    Hi all,
    For a customer with bad debt, it appears standard practice is to use a journal entry to write the debt off to a "Bad Debt" GL account, and then manually reconcile BP balance to zero.
    However, the VAT(consumption tax) for the written off amount will still be showing as owed to the government, and will still appear in the TAX report.
    In the UK as in other countries, I assume there is relief on bad debt, so the VAT(consumption tax) needs to be written off as well. The only correct way I can think of doing this at the moment is doing a service type credit note with matching tax code of the original invoice specifying the bad debt GL account. In this way, the VAT will also be reversed.
    Can anyone advise what method they use, or if there is a proper methodology to do this?
    Thanks,
    Raj

    Hi Gordon,
    Thanks for the reply. So as an example, am I correct in thinking the below is the "correct way" to do a write off (if we wanted to avoid doing journal entries):
    AR INVOICE - Item Type
    Item A x 1 @GBP100.00
    VAT/TAX @GBP17.50
    -->
    AR CREDIT NOTE - Service Type
    Bad Debt Write Off     xxxxxxxxxx (GL a/c no)    @GBP100.00
    VAT/TAX @GBP17.50 (assuming we specify identical tax code)
    -->
    Internal reconciliation to zero
    Thanks,
    Raj

  • Stock Write-off Report

    Dear Friends,
    Is there a transaction or Report available to see the write-off stock by plant or through any movement types ? Please suggest
    the requirement is as fallows:
    Report needs to be selectable by IPC or ICC. Or plant
    The report will need to show the stock that has been written off in Quantity of the item, the cost of this stock. And where the stock was written off.
    The report should provide a total cost per plant and a total cost per item. At that plant. Where multiple locations are viewed the total cost sum for the plants should be provided.
    Regards
    Prakash

    Hi Prakash
    Could you please clarify the following
    1. Is this write-off stock means stock posted to scrapping (551 mvmt)?
    2. What do you mean by IPC and ICC?
    If you can able to bifurcate the write-off through mvmt 551 (or any other) you may get all your requirements in MB51 report itself.
    Thanks/ GVRR

  • IS-Telecommunication RMCA - FI-CA Write offs

    Dear All,
    This is related to IS-Telecommunication. FI-CA
    Scenario: Invoice has been posted with 1121 $ including tax of 121. It means..
    Customer account    1121  Dr
    Revenue Account 1000 Cr
    VAT on sales 121 Cr.
    When I am trying to do the write off(FP04 by using reason codes). System is posting the document as below:
    VAT on sales account 121 Dr
    Expense account   1000 Dr
       To Customer Account 1121.
    I would like to transfer the total amount to the expense account instead of transfer to VAT account, if I use some specific reason codes (Like Bankruptcy).
    Expected account entry:
    Expense account 1121
    to Customer account 1121.
    I found there is a event 5070 (Write-off: Tax Special Features ) in order to meet the above requirement.
    If any one knows about the requirement and solution. Please advise.
    Thanks in advance
    Ravi

    HI Ravi,
    path is
    SPRO > Financial Accounting > contract A/R A/P > Basic functions > particular aspects of taxation procedure > tax adjustment for write offs
    or
    Tcode
    FQZ04T
    or
    FQC0 and type the posting area .
    thanks,
    VR

  • R12 - Accounts Payable & PO Accrual Reconciliation Report - write offs

    Hi,
    As a relative novice to Oracle I need some help.................
    My question regards the above which is essentially a "goods received not invoiced" report.
    I have a number of items on the report which I would like to write off for two reasons:
    (1) I have a small balance left which is basically the difference between the PO and the accounts payable column - in the region of 1p to 5p (therfore a housekeeping exercise)
    (2) Items that we've never received an invoice for (we've received the stock for free!). ie there is only an entry in the PO column of the report.
    For the above I would like a method of writing off these balances from the report.* This should therefore create a credit in my P&L account.
    Your thoughts please.
    Thanks in advance.
    Jon

    This is the forum for the SQL Developer tool. You need to ask your question in an eBusiness suite forum.

  • Write-off asset below or after certain Value of Asset.

    Hi All,
    I am try to write-off asset value from using ABZU - Write-Up But i am confused is it wright tcode or any other process please help me.
    Regards,
    juhi

    Hi All,
    Thanks
    When I try to post write-off asset useing ABZU error will be coming You cannot post write-ups
    We are using the Transaction Type - 700
    Regards,
    Juhi
    Edited by: juhis022 on Aug 24, 2011 8:57 AM

  • Impact of Sales Write off amounts on Tax liability

    Hi Friends ,
                       Did any of you had tis situation at your client ? I want to know the impact of tax liabilitry on sales write off amounts  , will it reduce the tax liability if sales write off amounts or in other words the bad debts are considered for tax calcualtion. Any inputs greatly accepted,
    thank you ,

    I am trying to post the tax portion to the tax liability account during write-off in IS-U FICA. Is there a way I can post the tax portion on the invoice to the tax liability account instead of posting the entire amount to the expense account? Any help is highly appreciated.

  • Asset write off in the current fiscal year.

    Hi Experts,
    I want to write off an asset in next 4 periods of the current fiscal year 2007. For example:
    Asset 11000
    APC value: 10000
    APC Date: 01.01.2005
    The useful life will end in fiscal year 2008.
    The book value left at the begining of the current fiscal year 2007 Rs. 4000.00
    In the current fiscal year this asset has already been depreciated for previuos 3 periods.
    Now Business wants to write off ( fully depreciated ) this asset in next 4 periods equally and then if the book value and tax value is nil, they want to scap the asset.
    Now can you please tell me how to make this happened. Its very urgent. If you need any more information, most welcome.
    Rgds,
    BABA

    Hi,
        You would have to set the asset to manual depreciation(Depr.Key MANU)
    and generate a posting via ABMA for each of the periods.
    Kind regards

  • Vendor balance write off

    Hi All,
    Just would understand how this bussiness scenario is usually handled in SAP AP.
    We have a liability for 1000. The vendor agreed that we can settle it at 500., hence a payment is created for 500.
    So to make the vendor account outstanding balance to '0', what is the normal practice in SAP Payables .
    In AR , we have a write off account to take care of these cases.
    thanks,

    You can write off the balance and can clear in T.Code F-51

  • Tables for additions/write-off/transfer of assets

    Hi,
    What are the tables for getting values reg asset additions/write-off/transfer during year/period.
    Regards
    Ankur

    hI
    Goto SE11 - give in database table- ANLA---click on display tab -
    click on contents Icon which is befire Technical settings
    Goto Menu bar-settingsFormat lst-choose Fields
    Thanks
    P J Anil kumar

Maybe you are looking for