Write optimized dso - Stand DSO loading by Delta Req by req is not working

Hi All,
We have a data flow which has 1st layer having write optimized dso and then we are loading data to Standard DSO.
We are using Delta DTP to load the data with the option "Get All New Data Request By Request", but it is not working.
Suppose if i have 2 requests which are need to update to Standard Dso from Write Optimized Dso, it is updating in single request. We are on SAP BW 701 patch level is 005.
Please suggest me ....

Hi Prasanna,
For reasons of downward compatibility, the system behaves differently for DTPs that were created before "SAP NetWeaver 7.0 Support Package Stack 13"
DTPs for which the indicator is set only get the first new request, even if there is more than one new source request at the time of processing. This restricts the way in which these DTPs can be used in process chains, because requests accumulate in the source and the target may not contain the current data. The Retrieve Until No More New Data indicator is therefore displayed for these DTPs.
I Suggest you to set this indicator and activate the DTP.
If you set the Retrieve Until No More New Data indicator and then activate the DTP, once it completes processing, a DTP request checks whether there are any further requests in the source. If the source contains more requests, a new DTP request is automatically generated and processed. Once the DTP is activated, the indicator is no longer visible in DTP maintenance.
This applies when the DTP is started by a process chain and also when you start the DTP directly from DTP maintenance.
The indicator is set by default for new DTPs that get data request by request.
If you do not select the indicator, the label for the Get All New Data Request By Request indicator changes to Get One Request Only. Once the DTP is activated, only this indicator is displayed in DTP maintenance.
Regards,
Sudheer.

Similar Messages

HT1212 My phone is disabled. I just loaded IOS 7 and my password does not work.

My phone is disabled. I just loaded IOS 7 and my password does not work.

I do not understand how to remotely wipe the phone using icloud, find my phone or my apple id and password. Kindly explain step by step as I am an older individual and I am confused

Since i have down loaded the new software my wifi does not work I have been to a apple store and they said it is a hard ware issue I do believe it is not my fault has the wifi workded before cheers Ben..

Since I have down loaded the new software my wifi does not work. I have been to a apple store and they said its a hardware issue. My phone was fine before the down load.

What is your technical support question for these user to user technical support forums?

Transformationsde-activating after changing write optimized to standard dso

Hi experts,
i changed write optimized dso to standard dso because of some changes, but after changes done i activated the changed transformations standard dso(previously write optimized), but it is not activating , after gone through the issue its happened
because of 0 record mode, i deleted the 0 recordmode rule and activated.
Now the real issue:-
when i transport this changed dso and transformations from dev to acceptance test am facing this issue below are the details.
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
Transformation 0MX1MHVGBT0A0PTA526YRW3O48Q77GOC deleted in version M of DDIC
Transformation 0RKZY5AKAWMJ2ZRKJMSZO791UP6X1F2N deleted in version M of DDIC
Activation of Objects with Type Transformation
Checking Objects with Type Transformation
Checking Transformation 0MX1MHVGBT0A0PTA526YRW3O48Q77GOC
Rule 10 (target: 0RECORDMODE group: 02 Technical Group ): Constant is initial
Checking Transformation 0RKZY5AKAWMJ2ZRKJMSZO791UP6X1F2N
Rule 10 (target: 0RECORDMODE group: 02 Technical Group ): Constant is initial
Saving Objects with Type Transformation
Internal Activation (Transformation )
Preprocessing / Creation of DDIC Objects for Transformation 0MX1MHVGBT0A0PTA526YRW3O48Q77GOC
Preprocessing / Creation of DDIC Objects for Transformation 0RKZY5AKAWMJ2ZRKJMSZO791UP6X1F2N
Please help me in this by rectificying in dev system how could i manage to send this transport to acceptance test.
One more thing even after deletin the 0recordmode in transformation , i can able to see that in techinical group.
cheers
vas
Post Processing/Checking the Activation for Transformation 0MX1MHVGBT0A0PTA526YRW3O48Q77GOC
Transformation 0MX1MHVGBT0A0PTA526YRW3O48Q77GOC was activated

Hi
You can change write optimised to satndard DSO.
You are supposed to add 0recordmode field in datsource check below links for clear information:
error while activating transformations
Re: Transformation error.
Ravi

I am updating creative cloud but under apps tab says failed to load error please retry but still will not work

i am updating creative cloud but under apps tab says failed to load error please retry but still will not work

Hi philip,
You may try to follow the steps below:
1.Close the Creative Cloud application.
2.Navigate to the OOBE folder.
Windows: [System drive]:\Users\[user name]\AppData\Local\Adobe\OOBE
Mac OS: /Users/[user name]/Library/Application Support/Adobe/OOBE folder
3.Delete the opm.db file.
4.Launch Creative Cloud.
Let us know if that helps,
Regards,
Rave

Open HUB ( SAP BW ) to SAP HANA through DB Connection data loading , Delete data from table option is not working Please help any one from this forum

Issue:
I have SAP BW system and SAP HANA System
SAP BW to SAP HANA connecting through a DB Connection (named HANA)
Whenever I created any Open Hub as Destination like DB Table with the help of DB Connection, table will be created at HANA Schema level ( L_F50800_D )
Executed the Open Hub service without checking DELETING Data from table option
Data loaded with 16 Records from BW to HANA same
Second time again executed from BW to HANA now 32 records came ( it is going to append )
Executed the Open Hub service with checking DELETING Data from table option
Now am getting short Dump DBIF_RSQL_TABLE_KNOWN getting
If checking in SAP BW system tio SAP BW system it is working fine ..
will this option supports through DB Connection or not ?
Please follow the attachemnet along with this discussion and help me to resolve how ?
From
Santhosh Kumar

Hi Ramanjaneyulu ,
First of all thanks for the reply ,
Here the issue is At OH level ( Definition Level - DESTINATION TAB and FIELD DEFINITION )
in that there is check box i have selected already that is what my issue even though selected also
not performing the deletion from target level .
SAP BW - to SAP HANA via DBC connection
1. first time from BW suppose 16 records - Dtp Executed -loaded up to HANA - 16 same
2. second time again executed from BW - now hana side appaended means 16+16 = 32
3. so that i used to select the check box at OH level like Deleting data from table
4. Now excuted the DTP it throws an Short Dump - DBIF_RSQL_TABLE_KNOWN
Now please tell me how to resolve this ? will this option is applicable for HANA mean to say like , deleting data from table option ...
Thanks
Santhosh Kumar

Load Balancing on RDS 2012 R2 does not work

Hello,
I'm working on a test deployment with 3 Session Hosts, GW/WA/CB on one server and licensing on another.
GW and CB are also on a Failover cluster so i don't want High Availability now (I want to start with simpler and work out the errors first)
One issue is when I try load balancing option on my Collection's Properties by changing the relative weight of the servers, nothing happens at all. All the sessions are created on a single server (GW/WA/CB) and nothing on the server I want to redirect to.
Any help is appreciated!

Hi,
Thank you for posting in Windows Server Forum.
Please see that you have added following registry key to the connection broker.
HKLM\SYSTEM\CurrentControlSet\Control\TerminalServer\ClusterSettings
DefaultTsvUrl tsv://VMResource.1.Virtualpool1
After this you can use “mstsc /admin” to perform remote desktop.
In addition, we can use DNS RR method to configure Load Balancing. Please check below thread for information.
2012 R2 Load-Balanced RDS farm
https://social.technet.microsoft.com/Forums/en-US/2ec5e96e-7ca6-44b5-85f8-5286c6881dea/2012-r2-loadbalanced-rds-farm?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

I load the Retina Macbook and the trackpad not working correctly

When I put the Macbook Retina to load the trackpad starts to fail, generate actions that we did not perform. I noticed that the MegaSafe charger is heating up too much during charging. When I remove the charger from the Macbook trackpad back to work properly.

The charger has to be replaced.

2LIS_02_ITM Delta for Cost Center Does Not Work

Experts,
I have activated 2LIS_02_ITM extractor and it extracts delta for PO Header and Item changes. However, when I change the 'Cost Center' or 'GL Account' assignments for a PO Item, system does not generate a delta. I have to make another change, e.g. text or something to bring the related change into BW.
Can someone please advise.
thanks,
Kartik.

Hi Kartik,
Just ensure you run a job control first on that extractor.A job control would push data from R/3 queue to BW delta queue.Then check the BW Delta queue(RSA7).Then run the extract checker in Delta mode and check for the delta records. If everything goes fine you should find your delta records here.
Regards,
Harold.

Sluggish at initial opening and loading websites, google maps print and images not working right, problems are not present in Chrome and Safari

Firefox is very slow opening. Web pages load slowly. When I go to images in a Google search, the pictures take a long time to load, and when I click on an image, then the back arrow, the loading time for the previous page is very slow. When I print a Google map, it is small, rather than full-page. In Google Chrome or Safari, the same actions product immediate results. I cannot get Google desktop to work.

This sounds like a network problem, since it goes away when you connect through a different network. You'll need to talk to your university's IT department about this.

Profile cannot be loaded, profile manager cannot be accessed, firefox not working

This is somewhat similar to other listed profile manager problems but none of the answers worked for me. OS is Win 8-64 bit. Have 2 user accounts. Admin and Limited. In Admin, Firefox works, can access Profile Manager, there is this profile.ini etc. Everything ok.
But in the Limited account, can not access Firefox. When clicked, it says 'Your Firefox profile can not be loaded. It may be missing or inaccessible'. Cannot access Profile Manager "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -p. Gives the same error message (Firefox not running).
Tried copying files in the Admin in to Limited. But the error message is same.
Uninstalled and installed using the Limited Account (supplying Admin password), no result.
Please help me.
Thank you for your time.

Hello jcbala
see '''IF''' we can create a test profile in the location you want, type the command:
===== "C:\Users\Limited\AppData\Roaming\Mozilla\Firefox\firefox.exe" -CreateProfile test =====
check if the path is correct (in the specific location)
http://kb.mozillazine.org/Command_line_arguments
thank you

Loading multiple SWFs and storing them (code not working under Firefox 23 and Chrome)

Hey guys,
Anyone has any idea why this code suddenly don't work anymore? (It works under internet explorer but not firefox and chrome
The code under is placed on my main swf to preload all my external swfs and store them for not having to wait too long to access them.
Thx guys.
I took the code from here btw: http://www.beautifycode.com/the-finer-art-of-loading-2-handling-multiple-swfs#snippet
I'm running flash player 11.8.800.94... It used to work under Firefox and Chrome
var _swfLoader:Loader;
var _swfRequest:URLRequest;
var _swfPathArr:Array = new Array("00.swf", "01.swf", "02.swf");
var _swfClipsArr:Array = new Array();
var _swfTempClip:MovieClip;
var _loadedSWFs:int;
startLoading(_swfPathArr);
function startLoading(pathArr:Array):void {
_swfLoader = new Loader();
_swfRequest = new URLRequest();
loadSWF(pathArr[1]);
function loadSWF(path:String):void {
setupListeners(_swfLoader.contentLoaderInfo);
_swfRequest.url = path;
_swfLoader.load(_swfRequest);
function setupListeners(dispatcher:IEventDispatcher):void {
dispatcher.addEventListener(Event.COMPLETE, onSwfComplete);
function onSwfComplete(event:Event):void {
event.target.removeEventListener(Event.COMPLETE, onSwfComplete);
_swfTempClip = event.target.content;
_swfTempClip.customID = _loadedSWFs;
_swfClipsArr.push(_swfTempClip);
if(_loadedSWFs <_swfPathArr.length - 1) {
_loadedSWFs++;
loadSWF(_swfPathArr[_loadedSWFs]);
} else {

Hi kglad,
The problem was coming from my server.
I recently played with some settings from a "cache control tool" offered by my hosting but i thought i had it back at default. Turns out i must've missed something. Now i have the .html caching on and everything works good on all browser.
I have another question tho...
I'd like to know if there's a way to cache an html file without having to ask my hoster to cache all of my htmls...
I'm using this code now but maybe there's a way to add something that will cache this page specifically?
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>title</title>
<script language="javascript">AC_FL_RunContent = 0;</script>
<script src="fluid_site.js" language="javascript"></script>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<link href="style.css" rel="stylesheet" type="text/css" media="screen"/>
</head>



<script>
    if (AC_FL_RunContent == 0) {
        alert("This page requires fluid_site.js.");
    } else {
        AC_FL_RunContent(
            'codebase', 'http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0',
            'width', '100%',
            'height', '100%',
            'src', 'index',
            'quality', 'medium',
            'pluginspage', 'http://www.macromedia.com/go/getflashplayer',
            'align', 'middle',
            'play', 'true',
            'loop', 'true',
            'scale', 'showall',
            'devicefont', 'false',
            'wmode', 'window',
            'id', 'index',
            'name', 'index',
            'menu', 'false',
            'allowFullScreen', 'false',
            'allowScriptAccess','sameDomain',
            'movie', 'index',
            'salign', ''
            ); //end AC code
</script>
<body>
<noscript>
    <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0" width="100%" height="100%" id="index" align="middle">
    <param name="allowScriptAccess" value="sameDomain" />
    <param name="allowFullScreen" value="false" />
    <param name="MENU" value="false">
    <param name=wmode value=window>
    <param name="movie" value="index.swf" /><param name="quality" value="medium" /><embed src="index.swf" quality="medium" width="100%" height="100%" wmode="direct" name="fluid_site" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer" />
    </object>
</noscript>
</body>
</html>
Thanks

I 'm having a problem with Mayhem app loaded new app then tried again still not working. What to do?

I loaded a new app on my Iphone then tried the Mayhem app but still getting the blue screen. What to do?

Repair your QuickTime.
Control Panel >
Win7/Vista - Program n Features
WinXp - Add n Remove Programs
Highlight QuickTime, click CHANGE then REPAIR

Could not load MMXCore Routines module because it does not work with Photoshop CS6?

What is this - should I be concerned?
Thanks,
DrDisk

Hi Joel,
Check out this FAQ: http://forums.adobe.com/message/4221311#4221311
regards,
steve

Just downloaded latest version--keeps trying to load last session-start new session does not work. Help?

Here is the problem details. Am I going to have to uninstall?
Problem Event Name: APPCRASH
Application Name: firefox.exe
Application Version: 1.9.2.4095
Application Timestamp: 4d852c95
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6002.18327
Fault Module Timestamp: 4cb73436
Exception Code: c0000005
Exception Offset: 000469ce
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: 1a9e
Additional Information 2: ca321f9d3309051b0d4a7a671dc893c6
Additional Information 3: 4a7f
Additional Information 4: 71f11eaed1268bd63f4a971e81cd5649

I am guessing this is malware or adware of some sort. Ty scanning with multiple and up-to-date tools
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
* [http://www.bleepingcomputer.com/download/adwcleaner/ AdwCleaner: (for adware)]
* [http://www.kaspersky.com/security-scan Kaspersky Free security scan]
You need to use multiple and up-to-date tools as they will not all pick up the same things.
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good FREE permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Write optimized dso - Stand DSO loading by Delta Req by req is not working

Similar Messages

Maybe you are looking for