Write Protection in Acrobat X

Hi all,
I wonder if any of you had the following problem before and knows how to fix it:
when I open a PDF file with Acrobat X the document is write protected, so I have to use "Save as" every time and save it with a new name.
I'm using Windows 7 64bit. The access-rights for this files are correct, and I'm able to delete or rename them under Windows as well.
When I'm opening them from a different PC it works fine as well.
These are not PDF/A documents, I've already checked that and tried to turn off the option "Open PDF/A write-protected", but with no effect.
Any suggestions would be really helpful. :-)
Thanx!
Anne

Hi,
A digital signature is a PKI based cryptographic operation, not a stamp, and as long as the file isn't locked it can be digitally signed. For that matter you can add a stamp, which is just a type of comment, to the file as well, again providing the file isn't locked due to some other operation (e.g. encrypting the file).
Vector art looks great in a PDF file and it scales just like you would expect.
Steve

Similar Messages

DIAdem 9.1; Windows2000; right problem; "Configuration-Drive Write Protected" for USER

Hallo community !
similar to these threads
http://forums.ni.com/ni/board/message?board.id=60&message.id=322&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=60&message.id=647&requireLogin=False
i run into problems working with DIAdem 9.1 on Windows 2000 SP4!
The Diadem installation went quite well.
My problem:
only "Administrator" and "Power User" have the privilige to "WRITE" to the DIAdem install directory.
Trying to start Diadem as non priviliged USER I get something like:
DIAdem Configuration-Drive "C:\PROGRAM FILES\ NATIONAL INSTRUMENT\DIADEM 9.10" WRITE PROTECTED!
I installed & started DIAdem for one
time with Administrator rights. I activated the Product and exported
the KEY to a License Server. Everything works fine for Power Users an
Administrators. Only "simple" USERs are not able to start Diadem due to
missing WRITE permissions. i can't grand this permissions to
normal USERs :-(
Playing around in Registry -> "RegWriteAccessAllow" ("0","1") (DWORD) (HKEY_LOCAL_MACHINE/Software/National Instruments/Diadem/9.10),
didn't solved the problem.
I switched back to "local License" Managment (local Key files) but the Probelm persists.
thanks in advance
P.S.
Quote: "You have to be at least a "Power User" in Windows 2000 to run DIAdem in Windows 2000."
http://forums.ni.com/ni/board/message?board.id=60&message.id=102&requireLogin=False
is this right ?
Message Edited by DirkT on 08-01-2005 03:58 PM
Message Edited by DirkT on 08-01-2005 04:02 PM

Hi DirkT,
Running DIAdem with User rights has different aspects we need to look at.
1) Registry Write Access
Launching DIAdem the first time with administrative rights registers some OLE components in the registry. After this step no more Admin rights are necessary for the registry. However running DIAdem as user might result in error messages as DIAdem tries to re-register the components again. You can avoid this by setting the RegWriteAccessAllow Key to 0 (see online help under "Administrator Notes")
2) File / Folder Write Access to the DIAdem Installation Folder
DIAdem needs write access to certain files e.g. the error logfile DEM_ERRS.001 or DESKTOP.DDD when saving configurations. You may change the folder where these file are being stored and searched for to a writeable folder by launching DIAdem with the "/d<NewFolder\MyDesktop.ddd>" start parameter or by setting the environment variable "DemDDD" to that folder. Then move the following files from the DIAdem installation folder to your new writeable folder:
*.ddd
userpar.par
dem_errs.*
3) File / Folder Write Access to other Folders
There are a number of other folders that DIAdem 9.x needs write access to and which cannot be changed. All of these folders are located by default under "%ProgramFiles%\National Instruments\Shared". Currently you need your Admin to give you write access to that folder and below
For future versions of DIAdem the team is working to make running under user rights easier.
Hope that helps,
Marcus

WIN7 x64 Home Basic, 0x80070013 when trying to write or delete files. Disk is write protected.

Hi,
My SD card reader is not able to write or delete and format sd cards.
WIN7 x64 Home Basic, 0x80070013 when I trying to write or delete files. When I trying to format I can see a message that disk is write protected.
The card is not locked, it's work in Lenovo Idea Pad s10 without any problem, It's also work in my Pentax camera.
I'm almost sure that the problem is software, but can't find solution.
Could Any one help me please?
Laptop is new, 8 days in use.

I have network shutdown 2.0.1 installed and the pcns process normally would be abend in 1 or 2 minute's time. What could be the problem ? Consider to upgrade the network shutdown to 2.2.1 version. Could the problem be resolved in new version ? Any precaution needs to be taken when installing the new version ?
Terence.

How to delete a write protected file from nokia x7...

There are some files that i need to delete from my nokia x7 phone memory. ( one mp3 file and a photo). It says that the file is write protected. Pls advice me

The files MAY be embedded within the Firmware .. Even NCC can't remove them ...
The cost of Battery may vary according to Region. You may contact Nokia Care or Authorised dealers in your area to know the exact price ...Anyways to get the battery replaced you need to visit Nokia Care ..

"The scratch disks are write protected or unavailable" on NEW project on PrE

I am running PrE 10 on Windows 7 64 bit. My computer has two internal hard drives (C and E). I want to put my projects and all scratch disks on E, the non-OS drive. When I try to create a NEW project and designate a directory I have already created on E, I get the following message from PrE 10:
"The scratch disks are write protected or unavailable..."
The program won't let me use E. However, when I check the drive, it HAS created a .PRV directory in the Preview Files directory and a .prel file in the Encoded Files directory. So it is actually able to write to drive E.
What gives? Thanks.
Jon

Thanks, Bill and John.
I am running from an administrator account, but I wasn't running "as administrator." I had already changed the permissions to give everybody everything.
Here is what I discovered. Running "as administrator" made no difference. So I ran the program "normally" again. Then I discovered that although the program was giving me the "The scratch disks are write protected or unavailable..." message, it was actually setting things up properly on my E drive. When I continued to use the newly created project, the correct directories and files had been set up on my E drive, and I was able to direct my captures to that drive as well. I haven't done much work on the project yet, but it appears to be working just fine so far.
I just now created ANOTHER new project on the E drive, and PrE did NOT give me the error message. Everything got set up properly. Hmm. It looks as if that message it put out in error, or, at the very least, unhelpfully!
By the way, what is Encore, and how would it play a part here?
Thanks.
Jon

Error message when finalizing...file already open with write protection

I just created my first movie in i Movie. It's about 9 minutes long. When I tried to finalize it it worked for a couple of hours and then came up with a message "unable to prepare project for publishing because an error occurred (file already open with write protection)". What does this mean? I thought I had closed all the files I was using. There was no error number. I tried it 3 times and got the same message. Any thoughts would be greatly appreciated.

AppleMan, I just checked that and it looks like Time Machine isn't open. I checked it by going to finder>applications>R click on time machine. It gave me the option to "open" which makes me think it's already closed. Is there somewhere else I need to be looking?
I made another movie that was just a couple of clips and it finalized fine. On that movie, I had some MTS clips and I converted them to mp4's so iMovie could read them.
In the one that didn't work I did clip one of the movies before I imported it into iMovie. It saved as a .mov instead of a .mp4. Would that make a difference? I checked all of the files and none of them are listed as locked, so I really don't get the "write protected" aspect of this error.

"Attempted to read or write protected memory" error in loading a report.

Development Environment
===
Windows XP
Visual Studio 2008 Pro; with Crystal Reports 2008 for Visual Studio
TagetCPU: 'AnyCPU'
VB.net 3.5
Windows dll
Crystal Reports Runtime SP2 (12.2.0.290)
Deployment Environment
===
Windows XP
.net3.5
Crystal Reports Runtime SP3 (no be confirmed)
I have created a windows dll with a form with a reportdocument, that loads a report (CrystalDecisions.CrystalReports.Engine.ReportDocument).
Then we circle through the report setting every table location to point at a specific ODBC and database.
The Dll can do this process several hundred reports in a day. However a small number (less than 10) of these have the following error:
"Attempted to read or write protected memory. This is often an indication that other memory is corrupt."
This is normally occurring when the reportDocument.Load function is called. But also happens when going through the setting of table locations: [myTable.ApplyLogOnInfo(TmpTableLogOnInfo)
The dll is called via COM interop and so i have checked "Register for COM interop".
Simon@Sanderson

1) Get to SP 3:
for dev computer:
https://smpdl.sap-ag.de/~sapidp/012002523100007123572010E/cr2008_sp3.exe
Recompile the app after SP3 is applied.
for SP3 runtime:
MSI
https://smpdl.sap-ag.de/~sapidp/012002523100007123592010E/cr2008sp3_redist.zip
MSM
https://smpdl.sap-ag.de/~sapidp/012002523100007123582010E/cr2008sp3_mm.zip
(You will have to uninstall SP 2 runtime before installing SP 3 runtime)
2) Do not use "Any CPU". CR2008 is only 32 bit anyhow so use 32 bit.
3) Make sure you are using .Close and .Dispose once you are done with each report object
- Ludek

Ipod Nano sync error : Hard disk write protected

I have a 2nd gen IPod nano 4 GB. I had Itunes 7.1 installed on my PC when I last synced. A week later my disk crashed and in the new disk I installed Itunes 7.2. When I tried to sync, I get a error message which says " disk is write protected. Please remove write protect and sync again "
Can someone help

No, you can use a third party program like Yamipod, or XPlay2, etc. But I would advise you to download iTunes anyhow, even if you have to go to another computer and then burn it to a CD or something.
12" PB, Mac Mini (x2), G3 iMac (x3), G4 iMac, G5 iMac, Centris 610, SE30, Mac+ Mac OS X (10.4.4) 3G iPod, iPod shuffle, iPod nano

HP SimpleSave md1000h write protected! - can't initialize drive

The drive does not show up under windows explorer. Under Disk Management, the drive shows up as Not Initialized and Unallocated. When I try to initialize the drive I get "The media is write protected" Restarted the PC and also the external hard drive and the same thing.
I am running Windows 7 Professional 32 bit.

You need to be an admin and also go to Control Panel --> User Accounts and turn off UAC for your account. You can set the level back later.
When in Disk Management, did you right mouse click on the new drive and select initialize?
You might have bad hardware.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

When I try to use the internal hard drive as a scratch disk I get this error "unable to set scratch disk- the selected directory is on write protect or non-writable media. Any ideas on how to fix this. It only happens in fcp.

When I try to use the internal hard drive as a scratch disk I get this error "unable to set scratch disk- the selected directory is on write protect or non-writable media. Any ideas on how to fix this. It only happens in fcp.

By internal, I assume you're referring to your systems (boot) drive. Is it, by chance, a partitioned dive?
Also…although many people successfully use their systems drives as scratch disks, over time you'll have better results using a dedicated drive for your media.
Good luck.
Russ

Disk unable to intialize - Media is write protected

Dear community,
My WD external harddrive has suddenly stopped working after coming from Europe. I plugged in the HD into my laptop and I noticed that it does not show up under My Computer, only under Safely Remove Hardware and Devices. So I searched forums a bit and a couple
have said that I should go to Disk Management and see if my drive is there.
Turns out the HD is listed there, however as 'Disk 1: Unknown 1.379 GB, Not Intialized'. There is no blue bar either, it just says the size of the disk and that it is unallocated (it does not have a Volume letter).
When I start up Disk Management it gives me a notification:
Initialize Disk
You must initialize a disk before Logical Disk Manager can access it.
Select Disk:
Disk 1
Use the following partition style for the selected disks:
MBR (Master Boot Record)
GPT (GUID Partition Table)
So I click on MBR and press OK, and it gives me the error 'The media is write protected'.
So I go into the registry under
HKEY_LOCAL_MACHINE > System > CurrentControlSet > Control > StorageDevicePolicies
and change the value in 'writeprotect' to 0, and then I reboot my computer. Same error.
I can't even reformat the disk because I cannot find such option, not that I want to really, because I have 1.2 TB worth of data on there that I want to keep so losing the information on this Drive will be quite.... frustrating.
Any help is appreciated.

Thanks a lot for your advice & effort. The same message "Diskpart failed to clear disk attributes".
Here is the file of $vds$.log (only a last part of the file). How can I attached the file, I can't find your email add. thanks again.
(PID:3956,TID:4380,11:17:56.728) LEAVE OpenDevice()
(PID:3956,TID:3220,11:17:56.744) INFO: VDS(0X02040002): WM_DEVICECHANGE: wParam=8006 lParam=8125984
(PID:3956,TID:4380,11:17:56.759) ERROR: CVdsRawDiskLun::SetFlagsInternal, 4 Name=\\?\usbstor#disk&ven_wd&prod_elements_1023&rev_2005#6&2429694&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}, Number=1, hr=80070013
(PID:3956,TID:3220,11:17:56.759) TRACE: VDS(0X02040007): Disk layout change notification received
(PID:3956,TID:4380,11:17:56.759) TRACE: EXIT CVdsRawDiskLun::SetFlagsInternal, Name=\\?\usbstor#disk&ven_wd&prod_elements_1023&rev_2005#6&2429694&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}, Number=1, status=80070013
(PID:3956,TID:3220,11:17:56.775) ENTER CVdsPnPNotificationManager::ForwardLayoutChangeNotification()
(PID:3956,TID:4380,11:17:56.775) ERROR: CVdsRawDiskLun::ClearFlags, 2 Name=\\?\usbstor#disk&ven_wd&prod_elements_1023&rev_2005#6&2429694&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}, Number=1, hr=800700B7
(PID:3956,TID:5792,11:17:56.791) ENTER CVdsPnPNotificationManager::LayoutChangeNotificationHandler()
(PID:3956,TID:3220,11:17:56.791) LEAVE CVdsPnPNotificationManager::ForwardLayoutChangeNotification()
(PID:3956,TID:5792,11:17:56.791) ENTER CVdsService::OnDiskLayoutChange()
(PID:3956,TID:4380,11:17:56.791) TRACE: EXIT CVdsRawDiskLun::ClearFlags, Name=\\?\usbstor#disk&ven_wd&prod_elements_1023&rev_2005#6&2429694&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}, Number=1, status=800700B7
(PID:3956,TID:4380,11:17:56.791) ERROR: CVdsDiskLun::ClearFlags, 4, hr=800700B7
(PID:3956,TID:5792,11:17:56.806) ENTER CVdsRawDiskLun::GetProperties() (IVdsDisk)
(PID:3956,TID:5792,11:17:56.806) ENTER OpenDevice()
(PID:3956,TID:4380,11:17:56.806) LEAVE CVdsDiskLun::ClearFlags
(PID:3956,TID:5792,11:17:56.822) INFO: OpenDevice:, 1, \\?\PhysicalDrive1
(PID:3956,TID:3220,11:17:56.822) INFO: VDS(0X02040002): WM_DEVICECHANGE: wParam=8006 lParam=8125956
(PID:3956,TID:5792,11:17:56.822) LEAVE OpenDevice()
(PID:3956,TID:5792,11:17:56.837) ENTER IsDiskClustered()
(PID:3956,TID:3220,11:17:56.837) TRACE: TMP: GUID_IO_VOLUME_MOUNT event received.
(PID:3956,TID:5792,11:17:56.837) INFO: vdsutil::IsDiskClustered, NOT CLUSTERED
(PID:3956,TID:5792,11:17:56.853) INFO: vdsutil::IsDiskClustered, ONLINE
(PID:3956,TID:5792,11:17:56.853) LEAVE IsDiskClustered()
(PID:3956,TID:5792,11:17:56.853) ENTER IsDiskReadOnly()
(PID:3956,TID:5792,11:17:56.869) INFO: vdsutil::IsDiskReadOnly, disk is writable
(PID:3956,TID:5792,11:17:56.869) LEAVE IsDiskReadOnly()
(PID:3956,TID:5792,11:17:56.884) ENTER IsDiskCurrentStateReadOnly()
(PID:3956,TID:5792,11:17:56.884) WARNING: IsDiskCurrentStateReadOnly, 2, error=1
(PID:3956,TID:5792,11:17:56.900) LEAVE IsDiskCurrentStateReadOnly()
(PID:3956,TID:5792,11:17:56.900) LEAVE CVdsRawDiskLun::GetProperties() (IVdsDisk)
(PID:3956,TID:5792,11:17:56.915) ENTER OpenDevice()
(PID:3956,TID:5792,11:17:56.915) INFO: OpenDevice:, 1, \\?\usbstor#disk&ven_wd&prod_elements_1023&rev_2005#6&2429694&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
(PID:3956,TID:5792,11:17:56.931) LEAVE OpenDevice()
(PID:3956,TID:5792,11:17:56.931) ENTER GetDiskLayout()
(PID:3956,TID:5792,11:17:56.947) ERROR: GetDiskLayout: DeviceIoControl failed: 13
(PID:3956,TID:5792,11:17:56.947) LEAVE GetDiskLayout()
(PID:3956,TID:5792,11:17:56.947) ERROR: CVdsService::OnDiskLayoutChange, 7, path=\\?\usbstor#disk&ven_wd&prod_elements_1023&rev_2005#6&2429694&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}, 19
(PID:3956,TID:5716,11:17:56.962) ENTER CVdsService::RemoveObjectFromMap()
(PID:3956,TID:5792,11:17:56.962) LEAVE CVdsService::OnDiskLayoutChange()
(PID:3956,TID:5716,11:17:56.978) LEAVE CVdsService::RemoveObjectFromMap()
(PID:3956,TID:5792,11:17:56.978) LEAVE CVdsPnPNotificationManager::LayoutChangeNotificationHandler()
(PID:3956,TID:5716,11:17:56.978) ENTER CVdsDiskLun::~CVdsDiskLun()
(PID:3956,TID:5716,11:17:56.993) LEAVE CVdsDiskLun::~CVdsDiskLun()

Is it possible to resize partitions on a write protected internal hard drive?

Hi everyone,
The internal hard drive on my computer has been created into two partitions, one for Mac (350 GB) and another for Windows (150 GB).
Since I rarely use Windows (only for one scientific application from CambridgeSoft), there are a lot of free space on Bootcamp (115 GB). So I would like to resize these partitions to make it the Mac partition maximized, like 450 GB, and 50 GB for Bootcamp.
And the problem is that I'm unable to do that by using Disk Utility, Stellar Management Partition, iPartition.
It says something about write protected (images below).
So are there any ways to undo the write protected or resize those partitions?
Another small question is why the total volume as seen in the second image (iPartition) is not 500 GB, but just 465 GB (50 + 415).
All comments or suggestions are highly appreciated. Thanks!
p.s. I'm the only user.

To resize a Bootcamp partition you must use Bootcamp Assistant to remove the partition then create a new Bootcamp partition, or, use a 3rd party tool such as CampTune.
If you use Disk Utilities you will mess up your hard drive and it will be necessary to erase, format, and reinstall OSx and Windows again. You will lose all your data in OSx and Windows if you try to use Disk Utility to resize a Bootcamp partition.
And, 50 GB is too small for Windows, especially if you install programs and create/use data. 100GB minimum wouls likely work.
Back up all your data before messing with partition changes.

How to write Protect endprotect concept in Smartforms

hi
can any one suggest me
How to write Protect endprotect concept in Smartforms
i have some content to coem without break in SMARTFORM
how to do that
Thanks & Regards
kalyan
<thread moved, has nothing to do with ABAP Objects. Please choose your forums more carefully in future>
Edited by: Mike Pokraka on Sep 26, 2008 12:50 AM

Hi,
For 4.7 version if you are using tables, there are two options for protection against line break:
- You can protect a line type against page break.
- You can protect several table lines against page break for output in the main area.
Protection against page break for line types
- Double-click on your table node and choose the Table tab page.
- Switch to the detail view by choosing the Details pushbutton.
- Set the Protection against page break checkbox in the table for the relevant line type. Table lines that use this line type are output on one page.
Protection against page break for several table lines
- Expand the main area of your table node in the navigation tree.
- Insert a file node for the table lines to be protected in the main area.
- If you have already created table lines in the main area, you can put the lines that you want to protect again page break under the file using Drag&Drop. Otherwise, create the table lines as subnodes of the file.
- Choose the Output Options tab page of the file node and set the Page Protection option. All table lines that are in the file with the Page Protection option set are output on one page.
In 4.6, Alternatively in a paragraph format use the Page protection attribute to determine whether or not to display a paragraph completely on one page. Mark it if you want to avoid that a paragraph is split up by a page break. If on the current page (only in the main window) there is not enough space left for the paragraph, the entire paragraph appears on the next page.
Regards,
Himanshu Verma

PInvoke - Issue while calling DJVU function from C# Code - Attempted to read or write protected memory

Hi,
I know there are many questions in this subject but none of them help to resolve the issue I am currently facing.
Below is the signature of C Function from DJVULibre added in .NET code
[DllImport("C:\\Program Files\\DJVULIBRE\\LIBDJVULIBRE.dll", CharSet=CharSet.Ansi, CallingConvention = CallingConvention.Cdecl)]
private unsafe static extern int ddjvu_page_render(IntPtr page, ddjvu_render_mode_t mode, IntPtr pagerect,
IntPtr renderrect,
IntPtr pixelformat,
ulong rowsize,
[Out][MarshalAs(UnmanagedType.LPArray)]byte[] imagebuffer);Below is how I am calling this function in the c# codebyte* buffer = (byte *)Memory.Alloc(nSize);
try
IntPtr ptr1 = (IntPtr)Memory.Alloc(Marshal.SizeOf(prect));
Marshal.StructureToPtr(prect, ptr1, false);
IntPtr ptr2 = (IntPtr)Memory.Alloc(Marshal.SizeOf(rrect));
Marshal.StructureToPtr(rrect, ptr2, false);
byte[] array = new byte[nSize];
fixed (byte* p = array) Memory.Copy(buffer, p, nSize);
ddjvu_page_render(page, ddjvu_render_mode_t.DDJVU_RENDER_MASKONLY, ptr1, ptr2, fmt, (ulong)stride, array);
finally
Memory.Free(buffer);
}call to ddjvu_page_render in above code is throwing "Attempted to read or write protected memory. This is often an indication that other memory is corrupt."
Prior to this post I must have tried all the option could find in various blogs.
Appreciate any help, is almost a day I am clueless, your timely help could save my job

Thanks Viorel, below is the definition of original C function
DDJVUAPI int
ddjvu_page_render(ddjvu_page_t *page,
const ddjvu_render_mode_t mode,
const ddjvu_rect_t *pagerect,
const ddjvu_rect_t *renderrect,
const ddjvu_format_t *pixelformat,
unsigned long rowsize,
char *imagebuffer );below is how the code is calling this function in C#, the in pointers are all valid pointer I checked in debugging window byte* buffer = (byte *)Memory.Alloc(nSize);
try
IntPtr ptr1 = (IntPtr)Memory.Alloc(Marshal.SizeOf(prect));
Marshal.StructureToPtr(prect, ptr1, false);
IntPtr ptr2 = (IntPtr)Memory.Alloc(Marshal.SizeOf(rrect));
Marshal.StructureToPtr(rrect, ptr2, false);
byte[] array = new byte[nSize];
fixed (byte* p = array) Memory.Copy(buffer, p, nSize);
ddjvu_page_render(page, ddjvu_render_mode_t.DDJVU_RENDER_MASKONLY, ptr1, ptr2, fmt, (ulong)stride, array);
finally
Memory.Free(buffer);

How to enable indexing of a protected adobe acrobat document

Hi
I was trying to index all Adobe Acrobat documents inside one directory but I got a message suggesting that indexing of password-protected Adobe Acrobat documents is not possible.
I would like to know if there is a protection level (say read-only protection) that allows indexing of Adobe Acrobat documents. That would allow me to search for specific workd inside my index of Adobe Acrobat documents even if they are password protected.
Or is there any other means (say an add-in) that would allow indexing of password protected Adobe Acrobat documents and then enable searching thro these documents.
A.C.

In the security settings enable copying of the. Don't assign a open password.

Write Protection in Acrobat X

Similar Messages

Maybe you are looking for