Write to measurement file will not ask for file name once as selected.

When using the Write to Measurement file Express VI.  I select "Ask user to choose file" and "Ask only once" with the intention that the data from each iteration simply be appended to the chosen file.
I select "Run continuous" and the VI asks for me to choose a file repeatedly anyway instead of just appending the first file.  Selecting "Write to one file" properly appends data to the file specified in the box.
Am I doing something wrong?

DianeS wrote:
Personally I can't figure out why that particular button even exists (I'm told it's occasionally useful for debugging).  
I find it useful if I am creating a subVI that is supposed to be a part of another VI.  No while, loop just some inputs and outputs as a function.  If I want to test it out stand alone and try a variety of inputs, then Run Continuous and change the inputs, then I see immediate feedback on the outputs.  Once I'm satisfied its working right, then there is no need to clean up.  Just save it and drop it in the large VI as a subVI.
Beyond that, I see no need for Run Continuous.

Similar Messages

  • I can't get the laptop to start.  I get to the gray linen screen with a gray apple and stop.  It will not ask for log in.

    I can't get the laptop to start.  I get to the gray linen screen with a gray apple and stop.  It will not ask for log in.
    What do I do now?

    Hold the shift key at boot time, then run through this list, did you install anything recently or perform a update of some third party software? Uninstall it.
    Step by Step to fix your Mac
    Mac won't boot or "You need to restart"
    Create a data recovery, undelete boot drive

  • Sequence File will not unlock for editing

    A password was set on a sequence file.  This password was copied from an instruction on how to create a deployment for a set of test.  The sequence  file will not unlock for editing.  How can I unlock the sequence file?  I am using Test Stand 2014.  This file was last edited in Test Stand 2014.

    cbernie wrote:
    A password was set on a sequence file.  This password was copied from an instruction on how to create a deployment for a set of test.  The sequence  file will not unlock for editing.  How can I unlock the sequence file?  I am using Test Stand 2014.  This file was last edited in Test Stand 2014.
    I'm not 100% sure what you are having problems with. Is the problem that you simply don't remember the password? Or are you unsure how to get teststand to prompt to unlock the file? You can always go to the sequence file property dialog to unlock the file, assuming you know the password.
    -Doug

  • HT204400 Apple TV will not ask for my wifi password to connect - it says it is connected but it is not- i click on my wifi and says connected but does not ask for my password

    I just hooked up my Apple TV - it is all connected correctly- when my wifi comes up on my tv screen i click and select it. It then says it is "connected" , but it is not as is it has not asked for the password for my wifi. I have turned it all off and back on, I have restarted it as well. I do know why it will not ask for my password - am I missing something?

    It will not ask after it is already connected.  Is ATV working?  Can you connect to the iTunes store, Netflix, etc?

  • Iphone will not ask for password for mifi networkn

    My iPhone 4 will not ask for network password for Verizon MIFI network. Macbook & iPad both asked for password.

    Go to Settings > General > Cellular > Setup personal hotspot on the iPhone.  Is there a place for a password? Do you have the password stored in the iPhone but not in the MacBook and iPad?  Check these settings and see if there is a fix for it.  Otherwise, this might be something that can only be addressed by your carrier (Verizon). 

  • Locked PDF files will not open with user name and password. Help?

    I go to school online and our eBooks are in pdf format. I download them to my MacBook so that I can read them offline. When I download them, they open as they always did but, when I put my username and password in to unlock them, it tells me something about the file is edited and a copy will be saved but, it never opens the file. I have adobe reader on it, I am getting frustrated! I don't want to be logged into class every time I am studying material. Any ideas? Thanks in advance - this is my first Mac so, bare with me

    Not using netwok magic. I shut it down when it comes up.  I have tried using 192.168.1.1 but still will not accept user name and password.  I never changed the factory default and it just continues to ask for the user name and password.  Web utility site will not come up.  I have a wired desktop as my main computer and that is the computer I have been trying to access the utility from. 

  • Downloading csv file does not ask for where to store file

    Firefox is set to "Always ask me where to save files".
    I have a WebService from which to download a download.csv file via a POST request (must be a POST request and not a GET request due to data issues).
    I'm using jquery.fileDownload.js in the Website to achieve this. When pressing the download button, the screen 'Opening download.csv' opens with the option 'Save File' preset. After pressing OK, an explorer window should occur to be able to choose the file location. But it is NOT shown. Instead nothing more happens.
    What could be the problem?
    P.S.: in other browsers it works fine.

    Hello gnittala,
    thanks for your response.
    1. MIME type is set correctly.
    2. When using this config, the file is downloaded correctly.
    Now I found out, what was the problem:
    the jquery.fileDownload.js plugin was deleting the internally used iframe too early, so that the explorer window could not be displayed. Keeping the iframe longer (at least until explorer window is shown, or easier reuse it in next download call) solves the problem.
    Astridr

  • TS5376 download file will not save for installation

    As above I have been through the whole process as detailed. I did have issues uninstalling the mobile portion but got there in the end. I wnt into files and deleted anything left.
    Now when I ask to download file it ask to save and even though I hit save it does nothing????
    ive now removed after getting the errors and now cant re install
    feeling frustrated....

    Try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • I am trying to read a document from a bank and the pdf file will not open for me to read it.

    I have downloaded and installed acrobat reader xl and I still can not read pdfs for certain places why is this?  I am using google chrome as my default browser.  I went to the same banking website using explorer and the pdf opened without a hitch.  Why is this?

    Because Chrome uses its own PDF viewer; you should use the Adobe Reader plugin on Chrome to view online PDF docs correctly.

  • File-Save : Keeps asking for file name even if in a file

    In the sql worksheet if you edit a file, the File->Save button shows as disabled.
    Also, if you try Cnrtl S, the Save dialog window to select a file keeps coming up - very annoying. In my opinion, that should only come up for SaveAs. Thanks!

    Thanks! I have a slight disagreement with the Ctrl S functionality - if you are in the file that you opened, CtrlS should just Save to the file you are in and not pop up the SaveAs dialog. This is the basic functionality of CnrtlS in Word, Toad .....

  • Adobe 11 will not read my files.

    I have downloaded Adobe 11 several times, with and without the anti-virus set, and though it recognises my files Microsoft reports it had 'encountered a problem and is closing it down' when I try to open them.  When I restore the system to Adobe 9 it opens my old files but, obviously, not those in '11' format.  Any ideas?

    Well, it's like this.  Someone sends me some printed  information.  A bill.
    A report ,  It downloads.  I try  to open it and it tells me I need Adobe
    Reader 11 to do so and gives me a  link.  .  I download from the link.  It
    takes an age but in the  end it tells me I have successfully downloaded Adobe
    Reader 11. When I try to  open the file Microsoft tells me they have
    encountered a problem and are closing  it down.  When I try to open any of my
    saved Adobe Reader files I then  get the same message.  I have to use System
    Restore to get the facility of  Adobe Reader 9  back.  Then it opens my saved
    files again.
    In a message dated 04/11/2012 02:36:32 GMT Standard Time, 
    [email protected] writes:
    Re:  Adobe 11 will not read my files.
    created by Pat Willener (http://forums.adobe.com/people/pwillener)  in 
    Adobe Reader - View the full  discussion
    (http://forums.adobe.com/message/4821557#4821557)

  • File open menu will not open local files using open command but the same files will open if I double click them (permissions seem fine)

    Under File menu Open File will not open local files even those downloaded to the desktop by Firefox 5.
    If I double click on HTML file it does open
    Reinstalled. Same behaviour. Default Browser set correctly.
    Permissions set correctly. Odd behaviour.

    Are you sure it hasn't imported?
    Check for the track names (trackname only, not Album or Artist)) and see if they have a blank Artist and Album, because WAV files have no MetaData, so are kind of stupid as far as knowing anything about the Artist, Album & track id.
    You can't search by 'Untitled' either as there is literally, no name at all, but iTunes does pick up the actual physical track name in Finder and uses that. As an example, if you renamed your Aerosmith WAV file from say 'Toys In The Attic' to 'Love Song' it would import the track as 'Love Song' as that's all it can go by.
    There are a few iTunes AppleScripts that let you import from a file of WAV music, by looking at the enclosing Album in the enclosing Artist as that's how most PC progs create the WAV file structure.
    Mike

  • Not asking for network password

    My company guest network wifi  updates n/w password every day. When I switch on my MAC book there will be a popup screen asking for network name and password( auto join network). But some times, it is not asking for the password once it expires. I restarted mac book, but still its could join network and i donn have any way to enter the new password.

    add this to your start-up: gnome-keyring-daemon --components=gpg
    Edit: and install gnome-keyring ofc
    Last edited by MakeTheGOD (2015-04-28 05:24:33)

  • How to make a program that will ask for a name the first time the program is used and if is not the first time will not ask the name?

    I want to make a program that will ask for the ID of the testing machine the first time the program is running, then will never ask for it. I'm using Labview 6.0

    Hi
    There are a Couple of methods you can use for this.
    Method 1 -
    You can create an ini file and save a boolean Key "First Instance" as True. Now In your Program you read this Key, If it is True then you can show your ID Dialog VI.If False do not run the VI. At the Conclusion of Id Dialog you can update this registry enrty to False. So In effect you have created One time Event. In fact you can save ID as another Config entry.
    The Drawback and advantage is that such an INI file can be edited by someone moderately knowledgeable about the Program
    Method 2
    Use Unitialized Shift Register in A while Loop. Please see LV2 style Globals entry under this forum. You can read and write to this Variable and it retains the Value it last had within it.
    You can read
    this Global the Very first time and say if it true you display your ID Vi. If False you dont. When you display your ID Vi you can Update your Global Like Before.
    If you need Example Let me Know.
    Good Luck
    Mache!!
    Good Luck!
    Mache

  • Mov reference file will not open in QuickTime 7.7.4 for Windows

    Hi,
    I have a mov reference file which opened fine in QuickTime 7.6.2 but since upgrading to 7.7.4 the file will no open. I get the following error:
    Error -2002: a bad public movie atom was found in the movie.
    The file contains one PAL MPEG2 video track and one stereo PCM audio track. It also contains a timecode track.
    See movie inspector below:
    Can anyone help me understand why this file will not open with the latest version of QuickTime. I cannot supply the file but can give any information about atoms etc. which can be read using QTAtomViewer.
    I am using Windows 7 and Windows Server 2008.
    Many thanks,
    Kate

    For those who want to call, the following menu options will get you to the Quick Time install tech support:
    2 - takes you to the Quick Time submenu
    2 - takes you to tech support
    then, choose 1 for Mac or 2 for windows
    Initially, I was told by tier 1 tech rep Shawn that the update server may not be up or that it may be a firewall issue on my side.
    After telling him that I have confirmed that it is a problem with the update server sending a NULL (0 byte) response to the update query, he said I would have to just download the latest one in order to have the most up-to-date version and "just check back periodically to see if the update server is working".
    He mentioned there was a Quick Time standalone download available (http://www.apple.com/quicktime/download/standalone.html), but that is still ~20MB & doesn't help the fact that probably over 90% of the people who run Quick Time have the option to automatically check for updates set and will never realize they're running an old, vulnerable version of Quick Time.
    He gave me a case number after I asked for one: 58027568
    If you'd like to add to mine and/or Rob's, it surely couldn't hurt.
    I suppose my next course is to try emailing contacts at apple to see what kind of response they have. Considering this problem has been there ever since QT 7 for Windows has been released (I don't remember ever checking for updates when running QT 7 beta), it's strange that it's still a problem.
    hand made system   Windows XP Pro  

Maybe you are looking for