Write xmp data to video file

I would like to somehow write some xmp data (timecode, camera, shutter speed, aperature) to my video files in an automated fashion without using Adobe Bridge. I want to do this so Adobe Premiere and Adobe Bridge can be able to read this data directly from my media files. This seems like a simply thing to want to do but it's proven very difficult. I have not found any commandline utilities that can write xmp data to a video file (exiftool doesn't support it). I have also found that Premiere in most of the time doesn't like to read sidecar xmp files which I can produce easily.
Any ideas?

Unfortunately I'm on windows. What I was looking for is adding timecode xmp start code to *.mov files from Canon 7d or 5d so I have timecode to use throughout Premiere which would make my editing much easier as we shoot approximately 100 video clips in the wedding ceremony and need to edit that in multicam w/ 2 other cameras running the entire time.
I did some more research and was able to add this metadata using xmp to the MOV files however unfortunately premiere completely ignores this data. Seems like premiere only accepts using timecode data for DV or MXF files and no others (tested CS5 and CS5.5). What a shame! It seems like this should be much easier thing to do. I know it's pretty easy using FCP and if Adobe is really trying to lure away FCP users, they should get something this basic running smoothly.

Similar Messages

Adobe Media Encoder Could not write XMP data in output file.

Hi there i have searched for this on the forums,
if there is a Thread on it please Link:)
This is my Encoding Log from Adobe Media ancoder,
(se Below).
im doing a projekt from Mts Files, in Premiere pro
i have Checked the box that no Xmp Data needs to be added, to the left from the Queue button in the export window.
Should i Delete all the Xmp in Bridge or somthing like that to Resolve this?
Regards
Jonas Dwight
Encoding Log:
- Source File: /Users/Blasuk/Library/Caches/TemporaryItems/Mogel_oe_2014_nyeste.prproj
- Output File: /Users/Blasuk/Desktop/Video_Projekts/Fremkaldte/Moegeloe2014-hq.mp4
- Preset Used: Custom
- Video: 1920x1080 (1,0), 25 fps, Upper, 01:18:52:10
- Audio: AAC, 320 kbps, 48 kHz, 5.1
- Bitrate: VBR, 2 pass, Target 15.00 Mbps, Max 41.30 Mbps
- Encoding Time: 11:05:14
01/05/2015 07:35:01 PM : File Encoded with warning
File importer detected an inconsistency in the file structure of Moegeloe2014-hq.mp4. Reading and writing this file's metadata (XMP) has been disabled.
Adobe Media Encoder
Could not write XMP data in output file.

Any help please?! Thank you!

Media Encoder "Could not write XMP data in output file." issue

Greetings,
We have invested a great deal of money and time into a brand new editting system and we need some help with adobe media encoder. We are trying to export some of our projects and we keep getting the same error. Here is the entire log of errors:
Could not write XMP data in output file.
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_6.prproj
- Output File: M:\acura_rooftop_43_draft_1.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:17:23
2/4/2010 1:42:28 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_7.prproj
- Output File: C:\Users\Ramius\Desktop\acura_rooftop_43draft_1.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:02:09
2/4/2010 1:54:21 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_9.prproj
- Output File: C:\Users\Ramius\Desktop\acura_rooftop_43draft_1.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:16:04
2/4/2010 2:19:49 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_10.prproj
- Output File: C:\Users\Ramius\Desktop\acura_rooftop_HD_draft_1.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:01:38
2/4/2010 2:30:31 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_11.prproj
- Output File: C:\Users\Ramius\Desktop\acura_HD.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:00:38
2/4/2010 3:19:31 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_12.prproj
- Output File: C:\Users\Ramius\Desktop\acura_HD.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:01:08
2/4/2010 3:31:37 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_17.prproj
- Output File: C:\Users\Ramius\Desktop\acura_HD.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:15:31
2/4/2010 4:21:06 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_19.prproj
- Output File: M:\GRAPHICS\cow_graphics\acura_HD.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:00:24
2/4/2010 5:16:54 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_16.prproj
- Output File: C:\Users\Ramius\Desktop\mxf.mpg
- Preset Used: 1440 x 1080i 29.97 High Quality
- Video: NTSC, 1440x1080, 29.97 drop frame [fps], Upper, Quality 4.0
- Audio: 384 [kbps], 48 kHz, 16 bit, Stereo, MPEG
- Bitrate: VBR, 1 Pass, Min 4.00, Target 15.00, Max 18.50 [Mbps]
- Encoding Time: 00:05:08
2/23/2010 12:12:40 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_18.prproj
- Output File: M:\AVI\ihigh_avi\GAR\Marines\marinespromo_2009.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:04:00
2/23/2010 12:26:54 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_19.prproj
- Output File: M:\AVI\ihigh_avi\GAR\Marines\marinespromo_2009.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:05:08
2/23/2010 12:51:01 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_23.prproj
- Output File: C:\Users\Ramius\Desktop\allhdtest2.mpg
- Preset Used: 1440 x 1080i 29.97 High Quality
- Video: NTSC, 1440x1080, 29.97 drop frame [fps], Upper, Quality 4.0
- Audio: 384 [kbps], 48 kHz, 16 bit, Stereo, MPEG
- Bitrate: VBR, 1 Pass, Min 4.00, Target 15.00, Max 18.50 [Mbps]
- Encoding Time: 00:04:20
2/23/2010 4:23:46 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_27.prproj
- Output File: C:\Users\Ramius\Desktop\Sequence 07.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:09:11
3/2/2010 3:21:19 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_28.prproj
- Output File: C:\Users\Ramius\Desktop\Sequence 07_1.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:09:00
3/2/2010 3:34:47 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_29.prproj
- Output File: C:\Users\Ramius\Desktop\Sequence 07_2.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:10:22
3/2/2010 4:41:03 PM : Encoding Failed
Error compiling movie.
Unknown error.
We absolutely need to fix this issue ASAP, we are in a major bind until we can resolve this issue. Thanks a bunch.

We are using Windows 7
dual quadcore intel xeon processors 8gb ram
10000rpm internal drives. quadroefx 1800 video card
The drive is 4tb
We have tried exporting to many different locations with no luck
Its a very nice video editting system. We just need to figure out this exporter

How to read and write a data from extrenal file

Hi..
How to read and write a data from extrenal file using Pl/sql?
Is it possible from Dyanamic Sql or any other way?
Reagards
Raju

utl_file
Re: How to Create text(dat) file.
Message was edited by:
jeneesh

Write the data into a file in 10 ms interval within 10 sec

Hi,
I'm trying to write the data into a file when I press a OK button and the data should write in a file every 10ms interval. After pressing the OK button the process will stop after 10 sec.
I've attached my VI.
Problem is that I'm getting the result every ms. How can I get the data every 10ms? So it'll come 1000 data within 10 sec.
For other calculations purpose I'm using Amplitude and Level Measurements block to get the mean DC voltage, so when I change the Samples to Read and Rates, the process is getting stuck.
Any kind of suggestion is appreciable.
Thanks,
Chotan
Attachments:
DAQ_Time_Checking_For10s_02.vi ‏131 KB

See example attached, if needed
Nghtcwrlr
********************Kudos are alwayzz Welcome !! ******************
Attachments:
Example.vi ‏36 KB

Easiest way to write XMP data or files into a PDF file

Hi,
I wrote a little Adobe Air application, which is intended to generate XMP files for being imported into PDF files. Now I'm searching for the most efficient solution to import these XMP files. I'd be happy if I could select a PDF file from my Adobe Air application and write the metadata into the file, but I didn't find any library to this. Another option is something like a hotfolder. I try to avoid to import these files one by one. Could someone please give me a hint?
I'd be very glad!
Thank you beforehand!
Stefan

Hi,
Thanks for your suggestion.
My experience is more in Postgresql, sql server and ms access. So I can handle sql command better than java.
According to your suggestion, I come out following design.
Design:
1. Use SQL Developer to developer a copy stored procedure.
- The store procedure will copy ONE row of main data and data in related data table.
- use database link to access remote database.
- handle transaction and return error message if got error.
- update data if the data already copied into destination database.
2. A java program perform following tasks:
a. Use jdbc install the stored procedure in #1 into database by "CREATE OR REPLACE FUNCTION ..."
b. load copy data list from a file.
c. a loop to call installed stored procedure. Pass one main row per time into stored procedure.
d. print each main row copy result to stdout in the loop and stop if error happened.
So, I just need to pass the java program to operator.
Please tell me if you have any better idea or easier way to implement. Maybe, another possible solution is use shell script to execute sql command in sqlplus. :)
Thanks,
Regards,
Hing Cheow Yong

Write XMP Data into Adobe Illustrator

Hallo Forum, an XMP question.
I generate a String-Chain of words in an EXCEL VBA MACRO
At the moment I copy paste them on the Keyword field because I'm not able to write them automatic in the keyword field.
Somebody know's how I can transfer via VBA from EXCEL this Strings to Illustrator ?
Thank you

Unfortunately I'm on windows. What I was looking for is adding timecode xmp start code to *.mov files from Canon 7d or 5d so I have timecode to use throughout Premiere which would make my editing much easier as we shoot approximately 100 video clips in the wedding ceremony and need to edit that in multicam w/ 2 other cameras running the entire time.
I did some more research and was able to add this metadata using xmp to the MOV files however unfortunately premiere completely ignores this data. Seems like premiere only accepts using timecode data for DV or MXF files and no others (tested CS5 and CS5.5). What a shame! It seems like this should be much easier thing to do. I know it's pretty easy using FCP and if Adobe is really trying to lure away FCP users, they should get something this basic running smoothly.

Can you remove XMP data from .eps files in Illustrator-CS5.5?

Background:
I'm using font software called Typetool 3 and Illustrator CS5.5.
I am using these on Windows 7, 64 bit.
This is entry level font software released by Fontlab.
This software accepts artwork through the .eps file format in both theory and practice.
However: it refuses illustrator CS5.5 .eps files.
When I looked at this I came up with two highly interesting things: First- CS5.5 illustrator files are roughly 13 times the size of CS5 files, of this type (a simple font glyph-comparing a 29-30 kbfile to a 420-450 kb file in cs5 and cs5.5 respectively).
Thing two came from looking at what that data was (by opening it in a text editor). It appears that some of the data XMP data, illustrators data for tracking things like who created the file, copyright, and other. In document info many of these fields were blank. I'm sure this isn't the only issue because my exported xmp data is 64 kb large, but it does account for a chunk of the file.
The main question being: Can this xmp data; which for my purposes is redundant, because I have to put copyright and other data in the font, be removed or not included at the point of document creation?
The technical question being:Can the file be saved in a manner which will allow it to be exported from adobe CS5.5 and imported into Typetool 3?
Things I've tried:
In saving .eps file: removing document headers, previews, color data, saving as different versions of the language. Basically saving it without all settings.
In saving .ai file: saving without any settings checked (without compression, pdf editting, ect.) and saving it to a different level of illustrator.
I do not know enough about postscript programming to navigate the file or remove the offending data. Nor do I have time to do this over multiple glyphs.
As a matter of opinion I do not like that my software is including potentially identifying information (which is one of the intents of XMP data, to provide identification) without notifying the creator, let alone allowing me to keep it from doing that. I would not mind or bother-except for the fact its messed up an established workflow. If someone editted this data without my knowledge, say with a virus or heaven forbid manually, it would be also be bothersome. Having a check that identifies that I am sending this data out would give me something to know if this situation was in fact happening. Additionally for a situation like mine-communication between programs in a closed environment where no other users are involved, its unnecessary and wasteful... like putting gold rims on what is intended to be an oxcart.
I'm planning on going to Fontlab for later this week, as it is as much thier issue as it is Adobe's. From what I know XMP is both a useful and popular technology- having a workaround for this situation seems like it would be a good idea. If necessary I can attach some working files for comparision.

I would save it as EPS (version Illustrator 3). This should be compatible to almost any software that takes EPS.

How to write xml data to a file

Hi all,
We have a requirement of writing the xml data into a file in given directory in the server. Generating the xml data using the sql query below.
SELECT XMLELEMENT ("ROW",
XMLELEMENT ("CELL", xmlattributes ('EBIZCZMDL_01' AS "colname"), inventory_item_id),
XMLELEMENT ("CELL", xmlattributes ('EBIZFFMT_01' AS "COLNAME"), attribute29),
XMLELEMENT ("CELL", xmlattributes ('COMMON' AS "COLNAME"),inventory_item_id || '' || attribute29 || 'ITM')
AS "RESULT") "XMLDATA"
FROM apps.mtl_system_items_b
When we try to write the the data from this query to a file using UTL_FILE.put_line, the script gives the error
PLS-00306: wrong number or types of arguments in call to 'PUT_LINE'
If somebody can help us pls.......
Thanks in advance

Hi Odie,
We are looking at the xml data to be like the below:
- <xref xmlns="http://xmlns.oracle.com/xref">
- <table name="NAPP_ITEM_ITEMID">
- <columns>
<column name="EBIZFFMT_01" />
<column name="COMMON" />
<column name="EBIZQOT_01" />
<column name="EBIZCZMDL_01" />
<column name="EBIZCZGOLD_01" />
</columns>
- <rows>
- <row>
<cell colName="EBIZFFMT_01">154</cell>
<cell colName="COMMON">154811809990111362727</cell>
<cell colName="EBIZQOT_01">81</cell>
<cell colName="EBIZCZMDL_01">91</cell>
<cell colName="EBIZCZGOLD_01">991</cell>
</row>
- <row>
<cell colName="EBIZFFMT_01">180</cell>
<cell colName="COMMON">180811809990111362727</cell>
<cell colName="EBIZQOT_01">871</cell>
<cell colName="EBIZCZMDL_01">731</cell>
<cell colName="EBIZCZGOLD_01">341</cell>
</row>
</rows>
</table>
</xref>
We have managed half way trying to get the structure. As we are new to this XML Programming.
The call to dbms_xslprocessor.clob2file is within the cursor loop for the given SQL.
DECLARE
l_file_name VARCHAR2 (30);
l_file_path VARCHAR2 (200);
CURSOR xml_cur
IS
SELECT XMLELEMENT
("ROW",
XMLELEMENT ("CELL",
xmlattributes ('EBIZCZMDL_01' AS "colname"),
inventory_item_id
XMLELEMENT ("CELL",
xmlattributes ('EBIZFFMT_01' AS "COLNAME"),
attribute29
XMLELEMENT ("CELL",
xmlattributes ('COMMON' AS "COLNAME"),
inventory_item_id || '' || attribute29 || 'ITM'
) AS "RESULT"
) "XMLDATA"
FROM apps.mtl_system_items_b
WHERE attribute29 IS NOT NULL;
BEGIN
l_file_path := '/usr/tmp';
l_file_name := 'TEST_XREF4.xml';
FOR xml_rec IN xml_cur
LOOP
dbms_xslprocessor.clob2file(xml_rec.XMLDATA, l_file_path, l_file_name, nls_charset_id('UTF8') );
END LOOP;
END;
Please see the above code snippet and help us if we are doing something wrong.
Thank you

Problems reading xmp data into dng files

Hi there,
I am working on a Mac and have exported files as lossy dng for colour correction externally. They have done the work for LR 5 process (I am using CC) and returned xml files. I cannot seem to read this data into the dng files for further editing in Lightroom. I have tried re-importing them and I have tried reading metadata from file. Any help would be appreciated as I usually simply read the xmp to the original RAW but the RAW files are currently on an external drive in another country!!!
Thanks,
Andy

Moominman wrote:
I am basically trying to export xmp files from a set of low resolution dng files so that I can access my Lightroom edits in the RAW files. I have separated the RAW and dng files in different folders
Hi Andy,
I dunno how best to get extracted xmp files into the raw folders, but if you are comfortable with exiftool, you can use it to extract xmp sidecars from DNG files.
If you want a turn-key solution which does not required you to futz with exiftool, then consider a free plugin I wrote:
robcole.com - xEmP
It will allow you to create xmp sidecars with all your DNG adjustments and metadata (which can then be applied to the non-dng raw files).
However, if you won't need the DNGs in your catalog afterward, then the easiest way is to convert them back to proprietary raw format using this plugin (also free, and I wrote it):
robcole.com - UnDNG
Conceptually, you can think of it as converting the DNGs to proprietary raw format, but note: it doesn't convert anything, it just allows existing raw files that are NOT in the catalog, to replace the DNGs that are in the catalog. All adjustments and metadata and everything else will be preserved (just like when you convert a proprietary raw to DNG format).
Rob

Can I select when do i want to write my data into a file?

What I want is like,
When I click a button as ON then only it goes an writes the data into a spreadsheet.
Now i have made the bolllean so that it will show TRUE when you have to write...but if FALSE nothing should happen...
and I cant see any option in Write to Spread Sheet function for it..
So can you help me out with what should I do
Solved!
Go to Solution.

You put the Write to Spreadsheet file in a case structure.
I would recommend looking at the online LabVIEW tutorials
LabVIEW Introduction Course - Three Hours
LabVIEW Introduction Course - Six Hours

AE not reading all the XMP data from DNG files

I'm working on a very large time-lapse for a construction company - I have a sunset that is broken between two folders and rendering the folders seperately makes Quicktime unhappy during playback and I get an ugly jump in sunset exposure.
So I combined the two folders in Lightroom (LR) from my RAW files (NEF) and exported the entire sequence as DNG files with simpler numbering. The sequence is about 1560 files and constitutes about 22 GB of data. I created a new LR library from the DNG sequence to make sure it all looked good and it does.
I imported the same DNG sequence into AE, checked a few frames in the preview and sent it out to render. Two thirds of the way through the QT movie, exported in H.264 at 30 fps, I start seeing problems. Huge sections look like the XMP data has not been read, then there's a good section and then bad again. I matched the movie time to preview in AE and indeed saw the same problems in the AE preview. So the problem begain in AE's reading the files from the folder, not in rendering.
I went back to LR for file comparison. There was no problem in LR. All the DNGs look great.
I'm on a MacBookPro Retina with 2.8 GHz Intel processor, 16GB 1600 MHz DDR3 Ram and NVIDIA GeForce GT 650M 1024 MB graphics
I have the standard 69GB cache on an external drive and have 11GB RAM available for AE.
Installed CPUs =8
CPUs reserved for other apps = 2
RAM allocation per background CPU = 1GB
Actual CPUs that will be used = 6
I have the latest AE from the Adobe Cloud, although I haven't done the most recent update yet.
My thought was to break the folder up into smaller segments for rendering, but that's not the problem. I see the XMP hasn't been consistantly read in preview. To me it doesn't make sense that the folder is too large for preview because it's not even rendering it there, just reading the files...?
Any insight, solutions?
Thanks,
Dennis

Moominman wrote:
I am basically trying to export xmp files from a set of low resolution dng files so that I can access my Lightroom edits in the RAW files. I have separated the RAW and dng files in different folders
Hi Andy,
I dunno how best to get extracted xmp files into the raw folders, but if you are comfortable with exiftool, you can use it to extract xmp sidecars from DNG files.
If you want a turn-key solution which does not required you to futz with exiftool, then consider a free plugin I wrote:
robcole.com - xEmP
It will allow you to create xmp sidecars with all your DNG adjustments and metadata (which can then be applied to the non-dng raw files).
However, if you won't need the DNGs in your catalog afterward, then the easiest way is to convert them back to proprietary raw format using this plugin (also free, and I wrote it):
robcole.com - UnDNG
Conceptually, you can think of it as converting the DNGs to proprietary raw format, but note: it doesn't convert anything, it just allows existing raw files that are NOT in the catalog, to replace the DNGs that are in the catalog. All adjustments and metadata and everything else will be preserved (just like when you convert a proprietary raw to DNG format).
Rob

Write jTable data into a file

Hi All ,
I am preparing a Java Swing GUI , In this i have a jTable . Whenever a user writes data into that jTable , the written data should fall in a file .Please tell me the code how to write this jTable data into a file .
Any help will be highly appreciated.
Thanks,
Rajesh

Don't do that. Why would you want to rewrite the entire file (since you can't really selectively edit it) if just storing (maybe serializing) the table's data model when the application is exiting or an explicit saving is requested by the user would be enough?

Why won't the WVC80N write a motion-sensed video file?

I'm using a WVC80N camera and a WRT1900AC Wireless Router. My HP MediaSmart server, WHS 2003, is connected to the router via cable. I can have the camera ALWAYS RECORD to the server because the setup for that asks directly where to put the file. However, I want the camera to use motion sensing but that only goes to an FTP server. I input the local IP of my HP server and a port I have cleared on the router, the computer and the server firewalls. NO file is written even though the camera log says motion was detected as shown below:
(07/16/2014 19:37:20 FTP: Error during the connection or timeout.
07/16/2014 19:37:15 Alert: Detected motion.).
The first line is absolutely NO use: What "Error"? Yes, the user ID and password for the server are entered (several times just to make sure).
I have done this on BOTH the direct camera input and the camera utility program. By the way, why does the camera utility program constantly CHANGE the frequency to Once per Day EVERY time the utility is opened? Doesn't / Can't it save Every Day to a file? I have also RESET the camera and reinstalled the camera using the CD installation program so don't bother suggesting I do that AGAIN! I can view the video from this computer using the camera utility or from my cellphone or iPad/iPod using any of several applications and the DNS tracker. So I know the camer is working, I just can't get the video file stored onto my server. Do I need to install something like FileZilla on the server box to make it a REAL ftp?
I would like for this to work so any help would be appreciated.
Turner

Thank you for the suggesstion. I had the system working with an AC1900 router but had to replace the AC1900 with the WRT1900AC because the AC1900 kept getting hot and shutting off the wireless network. I would think if it would work with one router, it should work with another. I may put the AC1900 back on and check settings to see what I didn't get right. I need to reset the AC1900 to remove my userid and password(s) anyway.
I have a source for checking your suggestion on WAN enabling the MediaSmart server. I can check if that is possible.
Why isn't motion-sensed recording available like always-recording? I don't understand why the two have to be so different.
Thanks again,
Turner

Write XMP data to custom FileInfo Panel in CS5

Hello,
I have created a custom FileInfo Panel in CS5.5. We had a programmer create a shell script to do the same thing for CS3, but now he wants too much money to rewrite the script for CS5.5. I was able to create the custom info panel easily using a text editor (he claimed you needed FlashBuilder which he wanted us to pay for). It works perfectly and even maps to Xinet with no problem. But his shell script and Applescript (from Filemaker to file) no longer work. The data is being embedded into the file, but not using the new custom info panel. Is there anyone out there that knows how to either write to a custom info panel or could help me figure it out...or even tell me how to map the data to the correct info panel? I'm no programmer, but I can hack my way through a lot of stuff.
If someone wants a paying gig to make this happen, please respond.
Thanks!
-Motogrrl1313

I already have a filemaker applescript that copies the data to a web page in Xinet. Not knowing too much about bridge, I'd have to see how Bridge reads the panel and figure out how to map the copy to Bridge. Has anyone ever done that? This was going to be my alternate solution when I was looking to do this in CS3, then I found the guy who had written the app to write to the file. This would make a good compromise, though.

Write xmp data to video file

Similar Messages

Maybe you are looking for