Writing data to excel in multiple columns

Hi,
I have 9 arrays of values that I concatenate into one array, which I
then send through a formula node. I split the resulting array back into
9 arrays, which I would like to write to a spreadsheet file, such that
each array is one column. I also have a "time" column which I want
write as the first column, followed by the 9 columns (the arrays that
went through the formula node).
Right now all I get is one long column.
Any suggestions?
Attachments:
resistance to temperature.vi ‏109 KB

You need to wire each of your data arrays (PT100 1 through 9) as separate inputs into a Build Array function, with the Time array as the first input, for a total of 10 inputs. Make sure the "Concatenate Inputs" option on the Build Array is not selected. Then wire the resulting 2D array to the "2D data" input of the Write to Spreadsheet File.vi. This should give you the data in the format you need.
You can learn more about constructing arrays by reading the LabVIEW Help on the Build Array function.
Good luck,
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Similar Messages

Can data be sorted by multiple columns in numbers version 3

Since upgrading Numbers to version 3 (now 3.0.1) I have been unable to sort data in spreadsheets using multiple columns. Anyone found a solution?
Regards
kurrajong60

Here's a simple example. Say you want this sorted first by Region then by Name then by Amount.
So if you set up a sort index column with a simple formula and all you have to do is this (two clicks):
Giving you this:
Of course you could do it as I think Hiroto is suggesting and manually sort first by column B, then sort by C, then sort by A.
But that's a lot of trouble and it's easy to confuse the order so you end up having to start over again.
SG

Upload data from excel where one column has text of 3000 characters

Guyz,
I have a query. One of my requirments is to upload data from excel sheet & create a material. In the excel sheet one of the columns has text for BASIC DATA TEXT under ADDITIONAL DATA of a Material. This is a text of running length.
the selection screen has feature of file upload & the users will upload excel files from their respective presentation servers.
Now my problem is that I need a function module which can convert this column in excel sheet into an internal table & later call the BAPI for MM creation.
I have used TEXT_CONVERT_XLS_TO_SAP & when i read my internal table to check this column length, it shows only 255 characters where as data in the excel sheet has 3000 characters (say for eg.)
Can anybody throw some light on this.
Thanks in advance
GPK

Hi,
You can try using this function module and see that whether all your data is coming into the internal table properly.
MS_EXCEL_OLE_STANDARD_DAT
For the other part you needed to convert the internal table data into the structure as need by the BAPI and then call the create BAPI to create the materials in the SAP System.
Hope this helps.
Thanks,
Samantak.

Upload data to excel sheet- make columns read only

I would like to upload my internal table data-10 columns into excel sheet.
I know how to upload my data into excel sheet.
I want 2 of the columns in excel sheet to be read only out of the 10 columns.
Is there any way that i can control the properties of excel sheet from SAP.
Thanks in advance

done

Problem in writing data to excel spread sheet using jdbc

Hi Friend,
I have written a jdbc application ,that retrives data from oracle8i database and writes to excel spread sheet.
Here I am facing a problem while writing date vales to the spread sheet.
It is just writing 00.00.0 , instead of a date like 21/10/2005, where I am going wrong , can any one guide me.
Thanks in advance.

Don't cross-post!
http://forum.java.sun.com/thread.jspa?threadID=643815&tstart=0
Especially when you already got your answer in the other post jackass. If you don't understand the answer then say so there.

Facing problem in writing data to excel sheet using ActiveX

Hi.
I want to write data from a one dimesional array to a particular excel sheet in a particular row.Please see the attached vi for explantion.
It is giving error.But If I give a new file name when the appliation is getting closed it is writing data to the new excel file.
Please help.
Thanks in advance
Attachments:
Excel sheetWrite.vi ‏90 KB

Thanks Jhoskin and Rudi .......
I am able to write data to excel sheet now. I am attaching one"test.zip" file that contains a VI named "Squence.vi "that contains another subVI named "Write U94006 Table To XL.vi"which does the functionality of counting the number of rows in the excel sheet and writing data in the next blank row. I am using the same subVI in the VI named "Sequence.vi"two times so it is taking a lot of time in opening and closing the excel sheet. Will you please suggest some way of calling the subVI only one time.
Rikki
Attachments:
Test.zip ‏105 KB

Problem in writing data to excel spread sheet

Hi Folks,
I have developed a jdbc application that writes data to excel spread sheet.while trying to write data to excel, it could not write date values properly.it is writing 00.00.0 for all the date feilds.
Can some one help here.
Thanks in advance.

You can try VistaJDBC at http://www.easyhr.com.au/software/easy_mdb_mde_compactor.htm .
Otherwise you can write your code to csv/xml/dbase III format, since Excel can open those file format easily.

Export data to excel and table column headers

I noticed that with LV 2012 when I call the method "Export Data to Excel" for a table, the table headers (= column names) are not exported to excel.
Am I right? I think that the column names should be exported too...
As a matter of fact when you call the method "Export to simplified image" the column names are included
How can I export the table column names to excel?
Vix
In claris non fit interpretatio
Using LV 2013 SP1 on Win 7 64bit
Using LV 8.2.1 on WinXP SP3
Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded
Using CVI 6.0 on Win2k, WinXP and WinXP Embedded

In this document there is a full description of how to export data from LabVIEW to Excel.
Using a table, the method "Export data to excel" should export the "currently selected data", and data can be programmatically selected using ActiveCell property (as described here).
With ActiveCell I can select the column headers too (using negative numbers for row and/or column), and I do this.
And so I expect that when I select "Export data to Excel", the column headers should be exported too (because I selected them!).
I think that the actual behavior is a bug, rather that an expected behavior.
Don't you agree?
Vix
In claris non fit interpretatio
Using LV 2013 SP1 on Win 7 64bit
Using LV 8.2.1 on WinXP SP3
Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded
Using CVI 6.0 on Win2k, WinXP and WinXP Embedded

Export data to excel with multiple worksheet

Hi all,
Thanks to Roel, Andy, Scott, and Varad. I could go this far with my first project with APEX :)
thank you guys !!
I am left with one last bit (unless the client request more feature). I need to export the database to an excel spreadsheet.
I have about 5 tables so I need to create 5 worksheet in the excel file.
Now I have tried OWA_SYLK from Tom (http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:728625409049#PAGETOP)
it works in my environment, but I just don't know how to create multiple worksheet in one excel file.
I read on the internet that XML spreadsheet is the answer but how to do that, I don't know.
Can anyone enlighten me?
Thanks.
Joel

It's easy with free RXLS PL/SQL library :
Procedure Test_002 is
wbk RXLS.XLS_WorkBook; -- workBook data structure
f1 integer; f2 integer; -– two workSheets
Begin
RXLS.NewWorkBook (wbk); -- new WorkBook init.
-- two worksheets creation
f1 := RXLS.NewSheet (Wbk,'Departments');
f2 := RXLS.NewSheet (Wbk,'Employees');
-- Writing into the first WorkSheet data from the first SQL request (DEPT)
RXLS.SQLtoXLS (xSQL => 'select * from Dept', xSheet => f1, xWbk => wbk, xR => 3, xC=> 2,
xMaxRows => 100, xMaxCols => 20);
-- Writing into the second WorkSheet data from the second SQL request (EMP)
RXLS.SQLtoXLS (xSQL => 'select * from Emp', xSheet => f2, xWbk => wbk, xR => 1, xC => 3,
xMaxRows => 20, xMaxCols => 10);
-- Excel Workbook or Open Office document , (MS XML 2003 format)
RXLS.GenXLS (wbk);
-- Dowload to IE or FF
RXLS.Show (wbk);
end; -- ex 2
[www.rci-informatique.fr/rxls]

Download internal table data into excel sheet with column heading and data

Hi,
I am having one internal table with column headings and other table with data.
i want to download the data with these tables into an excel sheet.
It should ask the user for file name to save it on their own name. They should give the file name in runtime and it should be downloaded into an excel sheet.
Can anyone tell what is the right function module for downloading these two internal table data with column heading and data.
what we have to do for storing the file name in runtime.
Can anyone help me on this.
Thanks,
Rose.

Hi Camila,
    Try this
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    FILENAME                        = PATH2
   FILETYPE                        = 'XLS'
TABLES
    DATA_TAB                        = IT_DATA
   FIELDNAMES                      = IT_HEADINGS
EXCEPTIONS
   FILE_WRITE_ERROR                = 1
   NO_BATCH                        = 2
   GUI_REFUSE_FILETRANSFER         = 3
   INVALID_TYPE                    = 4
   NO_AUTHORITY                    = 5
   UNKNOWN_ERROR                   = 6
   HEADER_NOT_ALLOWED              = 7
   SEPARATOR_NOT_ALLOWED           = 8
   FILESIZE_NOT_ALLOWED            = 9
   HEADER_TOO_LONG                 = 10
   DP_ERROR_CREATE                 = 11
   DP_ERROR_SEND                   = 12
   DP_ERROR_WRITE                  = 13
   UNKNOWN_DP_ERROR                = 14
   ACCESS_DENIED                   = 15
   DP_OUT_OF_MEMORY                = 16
   DISK_FULL                       = 17
   DP_TIMEOUT                      = 18
   FILE_NOT_FOUND                  = 19
   DATAPROVIDER_EXCEPTION          = 20
   CONTROL_FLUSH_ERROR             = 21
   OTHERS                          = 22

Excel source multiple column values to oledb destination single column in ssis 2012

Excel sheet has 4 columns which is filled with data till 500 rows on each column. I want to insert those excel data into single column(PolicyIds) and am using oledb destination. In excel souce i dont hav any column header. Can anyone suggest me how can i do
this effectively. (May be i can use script task to get range of data and use it as SQL variable). Is there any best approaches.
Sample excel
A          B             C             D
1001     1005       1009        1013
1002     1006       1010        1014
1003     1007       1011        1015
1004     1008       1012        1016

Inside Excel Source, use Data Access Mode - SQL Command as below:
select F1 from [Sheet1$] where F1 is not null
union all
select F2 from [Sheet1$] where F2 is not null
union all
select F3 from [Sheet1$] where F3 is not null
union all
select F4 from [Sheet1$] where F4 is not null
-Vaibhav Chaudhari

How to download output data into Excel with all Column Headings

Hi Experts,
Please tell me How to download output data of ALV Grid into Excel file with all Column Headings and I want to do this using coding,
please send me if any solution is available.
Thanks & Regards,
Yogesh

VERSION CONTROL (Most recent on top):                                *
DATE(mm.dd.yyyy)    AUTHOR                                         *
06.25.2007         Pattan Naveen                                   *
Hi yogesh,,
Go through this in this u find ur solution.
report ZTEst_programe no standard page heading
                           line-size 100
                           line-count 50(5)
                           message-id zz.
*--alv type declaration
type-pools: slis.
*--Tables:
tables: anla,
        anlz,
        anlh,
        anlb,
        anlc.
data: v_pos type i.
data: v_ndjar type i.
data: v_ndper type i,
      v_ndperndabp type i,
      v_ndjarndabp1 type i,
      v_ndjarndabp type i,
      value type i,
date(10) type c value '2006.12.04'.
data: c_0000(4) type c value '0000'.
data: begin of it_final occurs 0,
         anlkl(8),
         bukrs(4),
         anln1 like anla-anln1,
         anln2 like anla-anln2,
         txt50 like anla-txt50,
         txa50 like anla-txa50,
         anlhtxt like anlh-anlhtxt,
         sernr like anla-sernr,
         invnr like anla-invnr,
         menge like anla-menge,
         meins like anla-meins,
         inken like anla-inken,
           ivdat like anla-ivdat,
         aktiv like anla-aktiv,
         gsber like anlz-gsber,
         kostl like anlz-kostl,
         kostlv like anlz-kostlv,
         werks like anlz-werks,
         stort like anlz-stort,
          raumn like anlz-raumn,
          txjcd like anlz-txjcd,
         ord41 like anla-ord41,
         ord44 like anla-ord44,
         gdlgrp like anla-gdlgrp,
         anlue like anla-anlue,
         lifnr like anla-lifnr,
         typbz like anla-typbz,
         aibn1 like anla-aibn1,
      aibn2 like anla-aibn2,
        aibdt like anla-aibdt,
         posnr like anla-posnr,
        vmgli like anla-vmgli,
        invzu like anla-invzu,
        ernam like anla-ernam,
        erdat like anla-erdat,
         afabe like anlb-afabe,
        afasl like anlb-afasl,
         ndjar like anlb-ndjar,
         ndper like anlb-ndper,
        afabg like anlb-afabg,
        ndabj like anlc-ndabj,
        ndabp like anlc-ndabp,
        andsj like anlc-andsj,
         andsp like anlc-andsp,
        safbg like anlb-safbg,
         umjar like anlb-umjar,
       inbda like anlb-inbda,
       kansw like anlc-kansw,
       knafa like anlc-knafa,
        kaafa like anlc-kaafa,
                 deakt like anla-deakt,
kanza like anlc-kanza,
kaufw like anlc-kaufw,
kinvz like anlc-kinvz,
ksafa like anlc-ksafa,
kmafa like anlc-kmafa,
end of it_final.
data: begin of it_final_as91 occurs 0,
         anlkl(8),
         bukrs(4),
         anln1 like anla-anln1,
         anln2 like anla-anln2,
         txt50 like anla-txt50,
         txa50 like anla-txa50,
         anlhtxt like anlh-anlhtxt,
         sernr like anla-sernr,
         invnr like anla-invnr,
         menge like anla-menge,
         meins like anla-meins,
         inken like anla-inken,
         ivdat like anla-ivdat,
         aktiv like anla-aktiv,
         gsber like anlz-gsber,
         kostl like anlz-kostl,
         kostlv like anlz-kostlv,
         werks like anlz-werks,
         stort like anlz-stort,
         raumn like anlz-raumn,
         txjcd like anlz-txjcd,
         ord41 like anla-ord41,
         ord44 like anla-ord44,
         gdlgrp like anla-gdlgrp,
         anlue like anla-anlue,
         lifnr(10),
         typbz(15),
         aibn1 like anla-aibn1,
         aibn2 like anla-aibn2,
        aibdt like anla-aibdt,
         posnr like anla-posnr,
        vmgli like anla-vmgli,
        invzu like anla-invzu,
        ernam like anla-ernam,
        erdat like anla-erdat,
end of it_final_as91.
data: it_download_as91 like it_final_as91 occurs 0
                                          with header line."#EC NEEDED
data: begin of it_final_as92 occurs 0,
         anlkl(8),
         bukrs(4),
         anln1 like anla-anln1,
         anln2 like anla-anln2,
         deakt like anla-deakt,
         ernam like anla-ernam,
         erdat like anla-erdat,
         afabe like anlb-afabe,
         afasl like anlb-afasl,
         ndjar like anlb-ndjar,
         ndper like anlb-ndper,
          afabg like date,
         ndabj(3) type c,
         ndabp(3) type c,
        kansw like anlc-kansw,
       knafa like anlc-knafa,
        kaafa like anlc-kaafa,
kanza like anlc-kanza,
kaufw like anlc-kaufw,
kinvz like anlc-kinvz,
ksafa like anlc-ksafa,
kmafa like anlc-kmafa,
end of it_final_as92.
data: it_download_as92 like it_final_as92 occurs 0
                                          with header line."#EC NEEDED
data: begin of it_values occurs 0,
         anlkl(8),
         bukrs(4),
         anln1 like anla-anln1,
         anln2 like anla-anln2,
         deakt like anla-deakt,
         afabe like anlb-afabe,
        afasl like anlb-afasl,
         ndjar like anlb-ndjar,
         ndper like anlb-ndper,
         afabg like date,
         ndabj(3) type c,
         ndabp(3) type c,
         afabe_02 like anlb-afabe,
         afasl_02 like anlb-afasl,
         ndjar_02 like anlb-ndjar,
         ndper_02 like anlb-ndper,
          afabg_02 like date,
         ndabj_02 like anlc-ndabj,
         ndabp_02 like anlc-ndabp,
        kansw01 like anlc-kansw,
       knafa01 like anlc-knafa,
        kaafa01 like anlc-kaafa,
          kansw02 like anlc-kansw,
       knafa02 like anlc-knafa,
        kaafa02 like anlc-kaafa,
          kansw03 like anlc-kansw,
       knafa03 like anlc-knafa,
        kaafa03 like anlc-kaafa,
          kansw04 like anlc-kansw,
       knafa04 like anlc-knafa,
        kaafa04 like anlc-kaafa,
          kansw05 like anlc-kansw,
       knafa05 like anlc-knafa,
        kaafa05 like anlc-kaafa,
       kansw06 like anlc-kansw,
       knafa06 like anlc-knafa,
       kaafa06 like anlc-kaafa,
       kansw07 like anlc-kansw,
       knafa07 like anlc-knafa,
       kaafa07 like anlc-kaafa,
       kansw08 like anlc-kansw,
       knafa08 like anlc-knafa,
       kaafa08 like anlc-kaafa,
       kansw09 like anlc-kansw,
       knafa09 like anlc-knafa,
       kaafa09 like anlc-kaafa,
kanza01 like anlc-kanza,
kaufw01 like anlc-kaufw,
kinvz01 like anlc-kinvz,
ksafa01 like anlc-ksafa,
kmafa01 like anlc-kmafa,
end of it_values.
data: it_values_xls like it_values occurs 0
                                   with header line."#EC NEEDED
data: begin of it_itab1 occurs 0,
       bukrs like anla-bukrs,
       anlkl like anla-anlkl,
       anln1 like anla-anln1,
         anln2 like anla-anln2,
       txt50 like anla-txt50,
       txa50 like anla-txa50,
       invnr like anla-invnr,
       ktogr like anla-ktogr,
       sernr like anla-sernr,
       menge like anla-menge,
       meins like anla-meins,
       ivdat like anla-ivdat,
       inken like anla-inken,
       aktiv like anla-aktiv,
       deakt like anla-deakt,
       zugdt like anla-zugdt,
       zujhr like anla-zujhr,
       zuper like anla-zuper,
       gdlgrp like anla-gdlgrp,
       anlue like anla-anlue,
       xafabch like anla-xafabch,
       aibn1 like anla-aibn1,
       aibn2 like anla-aibn2,
       aibdt like anla-aibdt,
       posnr like anla-posnr,
       ord41 like anla-ord41,
        ord44 like anla-ord44,
        vmgli like anla-vmgli,
         invzu like anla-invzu,
         typbz like anla-typbz,
         lifnr like anla-lifnr,
         ernam like anla-ernam,
         erdat like anla-erdat,
      end of it_itab1.
data: begin of it_itab2 occurs 0,
        bukrs like anlz-bukrs,
        anln1 like anlz-anln1,
         anln2 like anla-anln2,
        bdatu like anlz-bdatu,
        werks like anlz-werks,
        gsber like anlz-gsber,
        kostl like anlz-kostl,
        kostlv like anlz-kostlv,
        stort like anlz-stort,
        raumn like anlz-raumn,
        txjcd like anlz-txjcd,
        ipsnr like anlz-ipsnr,
      end of it_itab2.
data: begin of it_itab3 occurs 0,
        bukrs like anlh-bukrs,
        anln1 like anlh-anln1,
        anlhtxt like anlh-anlhtxt,
       end of it_itab3.
data: begin of it_itab4 occurs 0,
        bukrs like anlb-bukrs,
        anln1 like anlb-anln1,
         anln2 like anla-anln2,
        afabe like anlb-afabe,
        bdatu like anlb-bdatu,
        afasl like anlb-afasl,
        ndjar like anlb-ndjar,
        ndper like anlb-ndper,
        afabg like anlb-afabg,
        ndurj like anlb-ndurj,
        ndurp like anlb-ndurp,
        umjar like anlb-umjar,
        safbg like anlb-safbg,
        zinbg like anlb-zinbg,
        inbda like anlb-inbda,
        end of it_itab4.
data: begin of it_itab5 occurs 0,
       bukrs like anlc-bukrs,
       anln1 like anlc-anln1,
         anln2 like anla-anln2,
       gjahr like anlc-gjahr,
       afabe like anlc-afabe,
       zujhr like anlc-zujhr,
       zucod like anlc-zucod,
       ndabj like anlc-ndabj,
       ndabp like anlc-ndabp,
       kansw like anlc-kansw,
       knafa like anlc-knafa,
       kaafa like anlc-kaafa,
       ksafa like anlc-ksafa,
       andsj like anlc-andsj,
       andsp like anlc-andsp,
kanza like anlc-kanza,
kaufw like anlc-kaufw,
kinvz like anlc-kinvz,
kmafa like anlc-kmafa,
      end of it_itab5.
ALV DECLARATIONS
*--declarations for Xls sheet header field names
data: begin of it_head occurs 0,
column(70).
data: end of it_head.
data: begin of it_head1 occurs 0,
column(70).
data: end of it_head1.
*--type declarations for field catalog for basic report
data: it_fldcat_head type slis_t_fieldcat_alv,
      wa_fldcat_head type slis_fieldcat_alv."#EC NEEDED
data : w_field type slis_fieldcat_alv."#EC NEEDED
data: it_fldcat_head1 type slis_t_fieldcat_alv,
      wa_fldcat_head1 type slis_fieldcat_alv."#EC NEEDED
*--type declarations for layout design
data: wa_layout type slis_layout_alv.
*--type declarations for list header on grid
*data: top_of_page type slis_t_listheader.
*--declaration of variables
data : w_repid like sy-repid.
**selection-screen
select-options: s_bukrs for anla-bukrs,
                s_anln1 for anla-anln1.
select-options: s_deakt for anla-deakt,
                s_gjahr for anlc-gjahr obligatory,
                s_anlkl for anla-anlkl,
                s_date for anla-aktiv.
*selection-screen
selection-screen begin of block blk1 with frame title text-022.
selection-screen begin of line.
parameters : r1 radiobutton group g1 default 'X'.
selection-screen comment 20(50) text-020.
selection-screen end of line.
selection-screen begin of line.
parameters : r2 radiobutton group g1.
selection-screen comment 20(50) text-021.
selection-screen end of line.
selection-screen end of block blk1.
selection-screen begin of block blk2 with frame title text-023.
select-options: s_ernam for anla-ernam,
                   s_erdat for anla-erdat .
selection-screen end of block blk2.
*--INITIALIZATION
initialization.
w_repid = sy-repid.
at selection-screen.
if r1 = 'X'.
    perform selection_screen_validation.
endif.
if r2 = 'X'.
    perform selection_screen_validation.
endif.
*--START-OF-SELCTION
start-of-selection.
if r1 = 'X'.
    perform populate-data.
    perform fill_finaldata.
   perform comment_build using top_of_page.
    perform xls_output.
    perform download.
endif.
if r2 = 'X'.
    perform populate-data.
    perform fill_finaldata.
    perform fill_as92data.
    perform putdata_horizontal.
    perform xls_output_as92.
    perform download_as92.
endif.
*--END-OF-SELCTION
end-of-selection.
if r1 = 'X'.
    perform build_layout.
    perform build_fieldcatalog.
   perform top_of_page.
    perform list-display.
endif.
if r2 = 'X'.
    perform build_layout.
    perform build_fieldcatalog1.
    perform list-display1.
endif.
*&      Form SELECTION_SCREEN_VALIDATION
      text
--> p1        text
<-- p2        text
form selection_screen_validation.
*--validating originating company code
data: l_bukrs like anla-bukrs."#EC NEEDED
if not s_bukrs[] is initial.
    select single bukrs from anla
           into l_bukrs
           where bukrs in s_bukrs.
    if sy-subrc <> 0.
      message e000 with text-001 .
    endif.
endif.
*--validating originating main asset no.
data: l_anln1 like anla-anln1."#EC NEEDED
if not s_anln1[] is initial.
    select single anln1 from anla
           into l_anln1
           where anln1 in s_anln1.
    if sy-subrc <> 0.
      message e000 with text-002 .
    endif.
endif.
*--validating originating Deactivation date
data: l_deakt like anla-deakt."#EC NEEDED
if not s_deakt[] is initial.
    select single deakt from anla
           into l_deakt
           where deakt in s_deakt.
    if sy-subrc <> 0.
      message e000 with text-004 .
    endif.
endif.
*--validating originating asset class.
data: l_anlkl like anla-anlkl."#EC NEEDED
if not s_anlkl[] is initial.
    select single anlkl from anla
           into l_anlkl
           where anlkl in s_anlkl.
    if sy-subrc <> 0.
      message e000 with text-006 .
    endif.
endif.
*--validating originating Date
data: l_date like anla-aktiv."#EC NEEDED
if not s_date[] is initial.
    select single aktiv from anla
           into l_date
           where aktiv in s_date.
    if sy-subrc <> 0.
      message e000 with text-007 .
    endif.
endif.
*--validating originating Fiscal year which first acquisition was posted
data: l_gjahr like anlc-gjahr."#EC NEEDED
if not s_gjahr[] is initial.
    select single gjahr from anlc
           into l_gjahr
           where gjahr in s_gjahr.
    if sy-subrc <> 0.
      message e000 with text-008.
    endif.
endif.
data: l_ernam like anla-ernam."#EC NEEDED
if not s_ernam[] is initial.
    select single ernam from anla
           into l_ernam
           where ernam in s_ernam.
    if sy-subrc <> 0.
      message e000 with text-009.
    endif.
endif.
data: l_erdat like anla-erdat."#EC NEEDED
if not s_erdat[] is initial.
    select single erdat from anla
           into l_erdat
           where erdat in s_erdat.
    if sy-subrc <> 0.
      message e000 with text-010.
    endif.
endif.
endform.                    " SELECTION_SCREEN_VALIDATION
*&      Form POPULATE-DATA
      text
--> p1        text
<-- p2        text
form populate-data.
select bukrs
         anlkl
         anln1
         anln2
         txt50
         txa50
         invnr
         ktogr
         sernr
         menge
         meins
         ivdat
         inken
         aktiv
         deakt
         zugdt
         zujhr
         zuper
         gdlgrp
         anlue
         xafabch
         aibn1
         aibn2
         aibdt
         posnr
         ord41
         ord44
         vmgli
         invzu
         typbz
         lifnr
         ernam
         erdat
        from anla
            into table it_itab1
            where anlkl in s_anlkl and
                  anln1 in s_anln1 and
                  deakt in s_deakt and
                  bukrs in s_bukrs and
                  aktiv in s_date.
if sy-subrc ne 0.
    message e000 with 'Data does not exist'(094).
endif.
if not it_itab1[] is initial.
    select bukrs
           anln1
           anln2
           bdatu
           werks
           gsber
           kostl
           kostlv
           stort
           raumn
           txjcd
           ipsnr
           from anlz
           into table it_itab2
           for all entries in it_itab1
           where bukrs = it_itab1-bukrs and
                 anln1 = it_itab1-anln1 and
                anln2 = it_itab1-anln2.
                  anln2 = '0000'.
    if sy-subrc ne 0.
      message e000 with 'Data does not exist'(094).
    endif.
endif.
if not it_itab2[] is initial.
    select bukrs
           anln1
           anlhtxt
           from anlh
           into table it_itab3
    for all entries in it_itab2
    where bukrs = it_itab2-bukrs and
          anln1 = it_itab2-anln1.
    if sy-subrc ne 0.
      message e000 with 'Data does not exist'(094).
    endif.
endif.
if not it_itab1[] is initial.
    select bukrs
    anln1
    anln2
    afabe
    bdatu
    afasl
    ndjar
    ndper
    afabg
    ndurj
    ndurp
    umjar
    safbg
    zinbg
    inbda
    from anlb
    into table it_itab4
    for all entries in it_itab1
    where bukrs = it_itab1-bukrs and
          anln1 = it_itab1-anln1 and
         anln2 = it_itab1-anln2.
           anln2 = '0000'.
    if sy-subrc ne 0.
      message e000 with 'Data does not exist'(094).
    endif.
endif.
sort it_itab4 by bukrs anln1 anln2 afabe.
if not it_itab4[] is initial.
    select bukrs
          anln1
          anln2
         gjahr
        afabe
        zujhr
        zucod
         ndabj
         ndabp
         kansw
         knafa
         kaafa
         ksafa
         andsj
         andsp
         kanza
kaufw
kinvz
kmafa
         from anlc
         into table it_itab5
         for all entries in it_itab4
         where bukrs = it_itab4-bukrs and
            anln1 = it_itab4-anln1 and
           anln2 = it_itab4-anln2 and
            anln2 = '0000' and
            gjahr in s_gjahr.
    if sy-subrc ne 0.
      message e000 with 'Data does not exist'(094).
    endif.
endif.
sort it_itab5 by bukrs anln1 anln2 ndabj ndabp.
endform.                    " POPULATE-DATA
*&      Form FILL_FINALDATA
      text
--> p1        text
<-- p2        text
form fill_finaldata.
loop at it_itab5.
    loop at it_itab4 where bukrs = it_itab5-bukrs and
                        anln1 = it_itab5-anln1 and
                        anln2 = it_itab5-anln2 and
                        afabe = it_itab5-afabe.
      it_final-afabe = it_itab4-afabe.
      it_final-afasl = it_itab4-afasl.
      it_final-ndjar = it_itab4-ndjar.
      it_final-ndper = it_itab4-ndper.
      it_final-afabg = it_itab4-afabg.
      it_final-umjar = it_itab4-umjar.
      it_final-safbg = it_itab4-safbg.
      it_final-inbda = it_itab4-inbda.
      it_final-ndabj = it_itab5-ndabj.
      it_final-ndabp = it_itab5-ndabp.
      it_final-kansw = it_itab5-kansw.
      it_final-knafa = it_itab5-knafa.
      it_final-kaafa = it_itab5-kaafa.
      it_final-andsj = it_itab5-andsj.
      it_final-andsp = it_itab5-andsp.
      it_final-kanza = it_itab5-kanza.
      it_final-kaufw = it_itab5-kaufw.
      it_final-kinvz = it_itab5-kinvz.
      it_final-ksafa = it_itab5-ksafa.
      it_final-kmafa = it_itab5-kmafa.
      read table it_itab1 with key   bukrs = it_itab5-bukrs
                                  anln1 = it_itab5-anln1
                                  anln2 = it_itab5-anln2.
      if sy-subrc = 0.
        it_final-anlkl = it_itab1-anlkl.
        it_final-anln1 = it_itab1-anln1.
        it_final-anln2 = it_itab1-anln2.
        it_final-bukrs = it_itab1-bukrs.
        it_final-txt50 = it_itab1-txt50.
        it_final-txa50 = it_itab1-txa50.
        it_final-invnr = it_itab1-invnr.
        it_final-sernr = it_itab1-sernr.
        it_final-menge = it_itab1-menge.
        it_final-meins = it_itab1-meins.
        it_final-ivdat = it_itab1-ivdat.
        it_final-inken = it_itab1-inken.
        it_final-aktiv = it_itab1-aktiv.
        it_final-deakt = it_itab1-deakt.
        it_final-gdlgrp = it_itab1-gdlgrp.
        it_final-anlue = it_itab1-anlue.
        it_final-aibn1 = it_itab1-aibn1.
        it_final-aibn2 = it_itab1-aibn2.
        it_final-aibdt = it_itab1-aibdt.
        it_final-ord41 = it_itab1-ord41.
        it_final-ord44 = it_itab1-ord44.
        it_final-vmgli = it_itab1-vmgli.
        it_final-typbz = it_itab1-typbz.
        it_final-lifnr = it_itab1-lifnr.
        it_final-posnr = it_itab1-posnr.
        it_final-invzu = it_itab1-invzu.
      endif.
      read table it_itab2 with key   bukrs = it_itab5-bukrs
                                anln1 = it_itab5-anln1
                                anln2 = it_itab5-anln2.
      if sy-subrc = 0.
        it_final-werks = it_itab2-werks.
        it_final-gsber = it_itab2-gsber.
        it_final-kostl = it_itab2-kostl.
        it_final-kostlv = it_itab2-kostlv.
        it_final-stort = it_itab2-stort.
        it_final-raumn = it_itab2-raumn.
        it_final-txjcd = it_itab2-txjcd.
      endif.
      read table it_itab3 with key bukrs = it_itab5-bukrs
                                 anln1 = it_itab5-anln1.
      if sy-subrc = 0.
        it_final-anlhtxt = it_itab3-anlhtxt.
      endif.
      append it_final.
      clear it_final.
    endloop.
endloop.
loop at it_final.
    move-corresponding it_final to it_final_as91.
    append it_final_as91.
    clear it_final_as91.
endloop.
delete adjacent duplicates from it_final_as91 comparing anlkl bukrs
anln1 anln2.
it_download_as91[] = it_final_as91[].
endform.                    " FILL_FINALDATA
*&      Form BUILD_LAYOUT
      text
--> p1        text
<-- p2        text
form build_layout.
wa_layout-zebra = 'X'.
endform.                    " BUILD_LAYOUT
*&      Form BUILD_FIELDCATALOG
      text
--> p1        text
<-- p2        text
form build_fieldcatalog.
if it_fldcat_head is initial.
    v_pos = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'ANLKL'.
    wa_fldcat_head-seltext_l = 'Asset Class'(093).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'BUKRS'.
    wa_fldcat_head-seltext_l = 'Company'(092).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'ANLN1'.
    wa_fldcat_head-seltext_l = 'Asset No'(091).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'ANLN2'.
    wa_fldcat_head-seltext_l = 'Asset Sub No'(090).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'TXT50'.
    wa_fldcat_head-seltext_l = 'Asset Des.'(089).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'TXA50'.
    wa_fldcat_head-seltext_l = 'Asset Des.'(088).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'ANLHTXT'.
    wa_fldcat_head-seltext_l = 'Asset main no txt'(087).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'SERNR'.
    wa_fldcat_head-seltext_l = 's.no/Expl no.'(086).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'INVNR'.
    wa_fldcat_head-seltext_l = 'Inv No'(085).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'MENGE'.
    wa_fldcat_head-seltext_l = 'Qtty'(084).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'MEINS'.
    wa_fldcat_head-seltext_l = 'Units'(083).
    append wa_fldcat_head to it_fldcat_head.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'INKEN'.
    wa_fldcat_head-seltext_l = 'Inv indi.'(082).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'IVDAT'.
    wa_fldcat_head-seltext_l = 'Last inv date'(081).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'AKTIV'.
    wa_fldcat_head-seltext_l = 'Asset Capital date'(080).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'GSBER'.
    wa_fldcat_head-seltext_l = 'Busin. Area'(079).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'KOSTL'.
    wa_fldcat_head-seltext_l = 'cost centre'(078).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'KOSTLV'.
    wa_fldcat_head-seltext_l = 'CC respon.for asset'(077).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'WERKS'.
    wa_fldcat_head-seltext_l = 'Plant'(076).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'STORT'.
    wa_fldcat_head-seltext_l = 'Asset location'(075).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'RAUMN'.
    wa_fldcat_head-seltext_l = 'Room'(074).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'TXJCD'.
    wa_fldcat_head-seltext_l = 'Tax. Jur.'(073).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'ORD41'.
    wa_fldcat_head-seltext_l = 'Evaluation Grp 1'(072).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'ORD44'.
    wa_fldcat_head-seltext_l = 'Evaluation Grp 4'(071).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'GDLGRP'.
    wa_fldcat_head-seltext_l = 'Evalu. group 5'(070).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'ANLUE'.
    wa_fldcat_head-seltext_l = 'Asset Super No'(069).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'LIFNR'.
    wa_fldcat_head-seltext_l = 'Vendor Acct. No.'(068).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'TYPBZ'.
    wa_fldcat_head-seltext_l = 'Reference no'(067).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'AIBN1'.
    wa_fldcat_head-seltext_l = 'Original Asset Trans.'(066).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'AIBN2'.
    wa_fldcat_head-seltext_l = 'Original Asset Trans.'(065).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'AIBDT'.
    wa_fldcat_head-seltext_l = 'Trans. Asset'(064).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'POSNR'.
    wa_fldcat_head-seltext_l = 'WBS Elt. Invt. Proj.'(063).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'VMGLI'.
    wa_fldcat_head-seltext_l = 'Property clas.key'(062).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'INVZU'.
    wa_fldcat_head-seltext_l = 'suppl.inv spec.'(061).
    append wa_fldcat_head to it_fldcat_head.
endif.
endform.                    " BUILD_FIELDCATALOG
*&      Form COMMENT_BUILD
      text
     -->P_TOP_OF_PAGE text
*form comment_build using top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
****Header
clear : ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = 'ASSET MASTER DATA LIST'.
append ls_line to top_of_page.
****Selection
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = 'Key 1'.
ls_line-info = 'Asset Records'.
append ls_line to top_of_page.
****Action
clear ls_line.
ls_line-typ = 'A'.
LS_LINE-KEY: not used for this type
ls_line-info = 'for AS91'.
append ls_line to top_of_page.
*endform. "comment_build
      FORM top_of_page                                              *
*form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
      exporting
           i_logo             = 'ENJOYSAP_LOGO'
           it_list_commentary = top_of_page.
*endform. "top_of_page
*&      Form LIST-DISPLAY
      text
--> p1        text
<-- p2        text
form list-display.
wa_layout-colwidth_optimize = 'X'.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program     = w_repid
           i_callback_top_of_page = 'TOP_OF_PAGE'
            is_layout              = wa_layout
            it_fieldcat            = it_fldcat_head
           i_background_id        = 'ALV_BACKGROUND'
       tables
            t_outtab               = it_final_as91
       exceptions
            program_error          = 1
            others                 = 2.
if sy-subrc <> 0.
write:/'No Top of Page'(098).
endif.
endform.                    " LIST-DISPLAY
*&      Form DOWNLOAD
      text
--> p1        text
<-- p2        text
form download.
perform setup_header.
call function 'DOWNLOAD'
       exporting
            filetype                = 'DAT'
       tables
            data_tab                = it_download_as91
            fieldnames              = it_head
       exceptions
            invalid_filesize        = 1
            invalid_table_width     = 2
            invalid_type            = 3
            no_batch                = 4
            unknown_error           = 5
            gui_refuse_filetransfer = 6
            customer_error          = 7
            others                  = 8.
if sy-subrc <> 0.
write:/'Error in file Type'(097).
endif.
endform.                    " DOWNLOAD
*&      Form setup_header
      text

Writing data in Excel file

hi,
i want to write the output of my jsp in an excell sheet. anybody teell me the way and the source code for this. Thanks in advance
Sathaa

Check out
org.apache.poi
it has a lot of tutorials on how to use excell with java

How to specify the sheet name while writing data into excel

_Workbook workbook = (_Workbook)(excelapp.Workbooks.Open(@"E:\ScriptTest\c.xlsx"));
workbook.Sheets.Add();
_Worksheet worksheet = (_Worksheet)workbook.ActiveSheet;
Line 1 Selection of excel sheet
Line 2:I am intersted in Adding the new sheet
Line3:Selection of Sheet
I want to select may be sheet 2 or sheet 3 like that
How to specify ?
And instead of just Add() can we specify name of sheet to be created also If yes how ?

Hi,
Please try the sample code:
Dim aSheet As Worksheet
Set aSheet = Worksheets.Add()
aSheet.Name = "myWorksheet"
Worksheets("myWorksheet").Activate
http://msdn.microsoft.com/en-us/library/office/ff821537(v=office.15).aspx
PS:
This forum is for general questions and feedback related to Microsoft Excel, if you have more Excel develop issue, I recommend you post to MSDN forum
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Writing several / multiple columns in a *.lvm file using write file option

Hello All,
I am doing several measurements and till now writing all the measurement in individual files thereby I am forced to use an external program to merge the files into one file of several columns.
Is there a possibility to write a *.lvm file (or some other possibility say a *.txt file but no excel) with multiple columns where each column stands for a particular data?
I am attaching a simple example where I have 4 different measurements (simulated using a regulator(I dont know how I can say this vi in english)??) which I am converting into array and trying to write them in a file of *.lvm extension. But the output is still a single column where every measurement is taking a different row which I dont want.
Thanks in advance.
Jan
Attachments:
Unbenannt 1.vi ‏97 KB

Instead of using the Build Array, just wire your scalars to the Merge Signals function. This will create 4 separate signals that will be written in 4 separate columns. With the existing 1D array, you could also use the Write to Spreadsheet File instead of Write to Measurement File.

Writing data to excel in multiple columns

Similar Messages

Maybe you are looking for