Writing DIgital Outpu Problems when clcking Start Windows button

I'm using a PCI 6025 on Win98 with NI-Daq 6.9.1. When run a VI that writes to one digital line output and then click on the windows START button, the output changes state. It writes 0 and 1 randomly. I tried even using the Intermediate level vis but it still happens. What should I do ?

Having review your code, I would like to recommend a next step.
Place the code in highlight execution. Run it, and see if, without caring about the highlighting going on, that the effect is duplicated. If not, I cannot be sure of where to advise you next. If it does, then you are doing good so far. Now, run the thing again (stop, restart, etc.) and pay attention to the highlight execution. You need to be able to figure out what code is executing, what flow occurs, when you press the start menu. I am guessing that the cause is something with the user interface that has an unexpected result in your code. Highlight execution will let you know EXACTLY what code is executing when the problem occurs, and is a very powerful troubleshooting tool.
If y
ou still can't figure it out, post again.
Good luck.

Similar Messages

I have a problem, when i start the project i open the browser window and whenh i select a clip premiere stops working!!!

i have a problem, when i start the project i open the browser window and whenh i select a clip premiere stops working!!!

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

Hello i have a problem when i start woorksheet, my computer crash with blue screen sometimes.

hello i have a problem when i start woorksheet, my computer crash with blue screen.
OS: Win 2000 pack 2 and dasylab 7.00.05 ;ddi7.02 ;nidaq 7.0
I hve this problem sometimes and need to reebot my computer.This worksheet is used to generate 4 signals to output and have an acquisition tooin this 4 channels.
The error is in the blue screen:0x00000076 (0x00000000 , 0x81358300, 0x000001c2, 0x00000000).
Thanks for your help.

The DASYLab development team has read your message, and advises that there is insufficient information to be able to even start diagnosing the problem. We suggest that you send a note directly to [email protected], with your full contact information, DASYLab serial number, and the following technical information:
-The Help-->Report information - this will tell us more about the computer, video and installed memory
-Installed hardware - what DAQ devices are you using (exact models!)
-The worksheet that crashes - we need to see how the timing is configured in the worksheet
-What other programs are running at the same time?
-Does the worksheet crash every time?
-Does the NI-DAQ Test Panel work correctly for both inputs and outputs?
Sorry that we cannot be more help in this forum; we do not have much experience with blue screen under Windows 2000. This is very hard to do, and is almost always related to a hardware problem - either a resource conflict, or problems with one of the installed hardware devices (DAQ, Video, Memory...).
Regards,
-cj
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

Dear Mr./Mrs., I had an iPhone 4 , then I bought iPhone 5s , I faced a problem when I started installing any new application other than I already had on my iCloud , I was asked to enter my password of my apple account and I entered it correctly , then I

Dear Mr./Mrs.,
I had an iPhone 4 , then I bought iPhone 5s , I faced a problem when I started installing any new application other than I already had on my iCloud , I was asked to enter my password of my apple account and I entered it correctly , then I was asked to answer two questions , but I forgot the answers !! I click on forgot the answers , they send me check your email , I check my email and they send me the password that I have already entered not the answers of the questions ! How can this problem be solved ?! Hope to take my message into consideration.
Yours sincerely,
                         Hesham.

Welcome to the user to User Technical Support Forum provided by Apple.
For your issue...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
          Ask to speak with the Account Security Team...
     Or Email Here > Apple Support iTunes Store Contact

Error Message "ElementsAutoAnalyzer.exe unable to locate. This application failed to start because ExtendedScript.dll was not found". This error message is seen when first starting Windows Vista, prior to starting Photoshop Elements 12.

Error Message "ElementsAutoAnalyzer.exe unable to locate. This application failed to start because ExtendedScript.dll was not found".
This error message is seen every time when first starting Windows Vista, PRIOR to starting Photoshop Elements 12.1
It does not seem to interfere with the normal operation of Photoshop Elements, but it is a constant annoyance.

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

HT3983 i have a sound problem when i install windows 7 32 bit on my imac

i have a sound problem when i install windows 7 32 bit on my imac

Did you download and install the Windows Support software? First step in Bootcamp Assistant is to download the support software. Then did you install the support software from within Windows?
Read the Bootcamp Install instructions. http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

I m using apple mac pc, when we start windows 7 , apple mouse doesn't work properly it take to much time to gain signals from the pc and many times it not work but when we use mac it moves fastly and works properly. please suggest me. thanks ravi

i m using apple mac pc, when we start windows 7 , apple mouse doesn't work properly it take to much time to gain signals from the pc and many times it not work but when we use mac it moves fastly and works properly. please suggest me.
thanks
ravi
<Email removed by Host>

sounds more like Bluetooth rather than moue, but w/o knowing w/o posting mac model type/year we... will... not... know... what you have
All computers are personal computers, a PC though is also "non-Apple" in common usage.
Mac also is platform and OS.
Very confused reading what you are trying to tell us.

I have a problem when i started de download it says that you have a mistake to load this content

Somebody help me when I started to download a movie it says that you have a mistake to download this content

Same problem, to be honest i am trying now to restore configuration. Let us see

OSX Mavericks Wifi connection problem when system starts

My macbook pro unable to connect to the preset wifi when system started, same whether starts and ready from sleep-mode, or previous shutdown mode.
This starts to happen just several weeks recently.
However, after restart the entire OSx, the connection (auto detect and connect) would be back to normal.
What's wrong? and any idea to solve this problem? Restart the OS takes very long time, and I don't like to waste time everytime open the laptop.
Please help. Thanks.

Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Wireless Diagnostics - About
Also try turning off Bluetooth

Problem when computer starts

when i start my computer , i see an error message ie "cannot find script file " and it gives the location of the file which is C/users/hanumanji/appdata/ roaming/adobe32/invis.vbs

Yes, that suspected malware (invis.vbs) is already gone from your computer; that's why you get that error during startup.
There are several ways programs can be called during the startup. If you don't know which method is used to call that file, use a program like CCleaner to delete startup items. There are a number of other programs that can do the same.

Problems when I start the Dreamweaver CS6 on Win xp

     Hello guys.
     I instaled a trial version of Dreamweaver CS6 in my PC, and when I will start the software, starts a task, but after they close automaticaly.
     I really don't know what to do, and this are bring me problems, and I want to know if is a error on my PC or on the software, and how can I resolve it.
     Properties:
     Windows XP. 32 bits. AMD.
      Any more imformation, tell me a message.
     Thank you.

We cannot know. Check your Windows Event Viewer.
Mylenium

Flash problem when viewing in windows

When I view my flash work on a web site in windows (works
fine in mac) when you mouseover the flash area it comes up with a
boundary box with a comment tag saying "Click to activate and use
this control" - you then have to click in the flash area before you
can start using any of the flash features, such as buttons and so
on.
I'm not sure why this is happening, but it seems to have
something to do with flash 9, windows, and my publishing settings
(im guessing). I know its not a browser issue or setting as i've
viewed many other sites with flash where they don't have this
happening..
All I'm doing is creating my flash, exporting it and then
importing it in dreamweaver.. Simple and straight forward
Can someone please explain to me how to fix it.
Thank you.

I am having the same problem as you. The problem is the
publisher settings fro Flash. The very last section you will see
"Local playback security" with a dropdown list of
* Access local files only
* Access Network only.
I hate these options and I wish there was a work around. I
noticed that my flvplayer buttons will not show up using the
network settings on the web but I can see the video. On the
otherhand, the video will not play embeded in a html file.
The local setting plays perfect on my computer, I can see the
video and flvplayer components, however the video will not play on
the internet.
I just do not know what to do.
In summary, the network settings will play on the network but
will not show the buttons and the local will not play on the web
but plays perfectly on the my computer.
Go figure

Usage Tracking - Access problem when Authentication Mode = Windows

Hi Everyone,
I´m working on UPK Usage Tracking configuration, in order to provide the finished training material.
1) In Server01 (on Window Server 2003) the UPK Usage Tracking is installed
2) In Server02 (also on Windows Server 2003) the Usage Tracking database is installed
3) By accessing the configuration file (http://Server01/ODSTrack/configuration/setup.aspx) on Server01,I setup the Authentication Mode = Forms
Note: The rest of the configurations were done.
4) Once the configuration from step 3 is done, I execute the traning material (on Server01) from another node of the windows network
and as a result I´m able to perform it.
5) I access the Statistc data on Server01 by accessing the file (http://Server01/ODSTrack/admin/default.aspx)and I´m also able to see the results.
6) When I execute the step 3 but with Authentication Mode = Windows, and including the GROUP name (windows group specially created for this goal where my user is included),
- I still have access to the training material (step 4)
- I have NO aceess to the statistics data any more (step 5) and the following message is display
"You do not have permission to access this page. Please contact your Usage Tracking Server Administrator to update your permissions. "
I don´t know what else I can do, and I wonder if some other configurations need to be done at windows network and/or explorer lever or any other.
Any help would be appreciated.
Best Regards//
Rubén Zamudio

Hi All,
This problem was solved by reconfiguring Usage Tracking in the authentication method (was anonymous and the solution was Windows integrated).
It is important to count on people from your organization working on Networks with some knowledge in IIS.
Best Regards
Ruben

Problem when I starting Weblogic Server Under Eclipse Suddenly Stop

Hi everyone:
I've a problem, I'm working with IDE Eclipse 3.2 and weblogic server 8.1 I need to debug the application, when I'm trying to start the server and everything look fine and almost at the end suddenly the server stop with this message:
Stopping Weblogic Server...
Failed to connect to t3://localhost:7001: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused; No available router to destination
please I need Help.
Thanks in advance

i still haven't found a solution to the problem with the specific setup i originally mentioned (wls 9.0, eclipse 3.2 on solaris/sparc). even after upgrading to wls 9.2, the exact same bug occurs.
in the end, i just gave up on the standalone eclipse 3.2 and started using workshop for weblogic 9.2 that comes bundled with the wls 9.2 installation; and the problem does not occur with that setup.
wl workshop 9.2 is based on eclipse 3.1. so if you want to use regular eclipse with regular wls, then maybe eclipse 3.1 is the most stable version to use with wls. hth.

When Firefox starts, window opens, "Is your PC slow" by Systweak. powered by Afterdownload cannot delete

Yesterday, when I turned on Firefox, an Ad for a Registry cleaner pop up on the opening page. I tried to delete the pop up but there is no "close" button. I tried to delete using Add or Remove Programs Control panel), did not show up in the Display list. Restarted, no change. Tried : System Restore, no effect still would not delete. If I opened a "New Window" it would be free of the Ad pop up. In desperation I tried to download the Registry cleaner, got an error message from my virus scanner that the .exe file was a possible virus. Ran my virus scanner (ESET) & DELETED THE .EXE FILE. Opened FireFox, the popup window was still there.

Try the Following:
'''Scan for Malware'''
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try some of the following programs to scan for malware:
* [http://www.malwarebytes.org/mbam.php MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://windows.microsoft.com/MSE Microsoft Security Essentials] (A good permanent anti-virus if you don't already have one)
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
'''Reset Firefox'''
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Writing DIgital Outpu Problems when clcking Start Windows button

Similar Messages

Maybe you are looking for